Ubuntu-fr

Elfoic

J'ai troqué un driver nvidia contre xgl j'aurai pas du!!

-

Dernière modification par Elfoic (Le 07/09/2024, à 11:31)

nico1038

Re : J'ai troqué un driver nvidia contre xgl j'aurai pas du!!

Si j'étais toi, j'essaierai de supprimer le dossier .beryl qui doit se trouver dans ton home.

Nico

nico1038

Re : J'ai troqué un driver nvidia contre xgl j'aurai pas du!!

Voici le mien:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
    Load           "dbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    HorizSync       28.0 - 80.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV41.0"
    Driver         "nvidia"
    Option         "TripleBuffer" "true"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV41.0"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Depth       1
        Modes      "1600x1200" "1280x1024" "1200x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1600x1200" "1280x1024" "1200x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1600x1200" "1280x1024" "1200x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1600x1200" "1280x1024" "1200x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1600x1200" "1280x1024" "1200x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1200x800" "1024x768" "800x600" "640x480"
    EndSubSection
# Enable 32-bit ARGB GLX Visuals
    Option         "AddARGBGLXVisuals" "True"
EndSection

Section "Extensions"
       Option "Composite" "Enable"
EndSection

J'ai noté 2  options supplémentaires chez moi que tu devrais essayer ("TripleBuffer" "true" et "AddARGBGLXVisuals" "True")

Edit: Je viens de voir qu'il existe un fichier .beryl-managerrc. Avant de toucher à ton xorg.conf essaie de le supprimer et de redémarrer.

Dernière modification par nico1038 (Le 26/12/2006, à 16:27)

navaati

Re : J'ai troqué un driver nvidia contre xgl j'aurai pas du!!

t'as installé le paquet emerald-themes (pas sur de l'ortho)?

Dernière modification par navaati (Le 27/12/2006, à 18:21)

nico1038

Re : J'ai troqué un driver nvidia contre xgl j'aurai pas du!!

Pour résoudre le problème des fenêtres noires tu peux régler beryl en mode copy (c'est à dire sans Texture From Pixmap).

Pour cela bouton droit sur le diamant > Options avancées  de Beryl > Type de rendu > Copy.

Par contre ca risque d'être plus lent qu'en TFP. A toi de voir

Nico

Dernière modification par nico1038 (Le 27/12/2006, à 21:39)