#1 Le 29/07/2009, à 21:39
- samordi
SOS démarrage windows impossible aprés installation linux
Bonsoir à tous,
J'ai tellement entendu parler d'Ubuntu que j'ai sauté le pas.
Bien entendu j'ai visité le site et les différents tutoriel.
Voici ce" qui m'arrive :
1- j'ai archivé tous mes fichiers de windows.
2- j'ai formaté mon disque en créant 3 partitions
1 pour linux (20Go NTFS)
1 pour windows (10Go Fat 32)
1 de 80 Go pour le stockage (NTFS)
3- J'ai réinstallé Windows XP professional
4 - j'ai installé Ubuntu 8.9 à partir de live USB
Jusque la pas de problème.
Mais lorsque j'ai voulu démarrer Windows je n'ai pas accès au BIOS pour choisir la partition.
J'ai bien Grub qui se lance mais après je sèche.
Pourriez-vous m'aider SVP
mon poste est un HP 2600 avec 1 DD de 120 Go
MERCI
Hors ligne
#2 Le 29/07/2009, à 21:45
- Nasman
Re : SOS démarrage windows impossible aprés installation linux
Si ubuntu se lance, dans ce cas poste le résultat de
sudo fdisk -l
(-L en minuscule) dans un terminal (Application/accessoires/terminal)
s'il ne se lance pas, alors fais la même chose en bootant sur le LiveCD (Démarrer ubuntu sans rien changer)
Puis
cat /boot/grub/menu.lst
(si ubuntu a été lancé depuis le disque)
ou
cat /media/diskxxx/boot/grub/menu.lst
(en remplaçant diskxxx par l'intitulé de la partition système ubuntu telle qu'elle apparait dans Raccourcis)
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#3 Le 29/07/2009, à 21:49
- samordi
Re : SOS démarrage windows impossible aprés installation linux
voici ce qui resort de la commande fdisk -l
Disque /dev/sda: 120.0 Go, 120060444672 octets
255 têtes, 63 secteurs/piste, 14596 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Identifiant de disque : 0x9bc40a91
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 1 2519 20233836 83 Linux
/dev/sda2 2520 14595 97000470 f W95 Etendue (LBA)
/dev/sda5 2611 3917 10485688+ b W95 FAT32
/dev/sda6 3917 14595 85775728+ 7 HPFS/NTFS
/dev/sda7 2520 2610 730894+ 82 Linux swap / Solaris
Les entrées de la table de partitions ne sont pas dans l'ordre du disque
Hors ligne
#4 Le 29/07/2009, à 21:54
- samordi
Re : SOS démarrage windows impossible aprés installation linux
La commande : cat /boot/grub/menu.lst
me donne ceci :
menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=11d8c726-579e-4b4e-8d83-00ce6aa608a0 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=11d8c726-579e-4b4e-8d83-00ce6aa608a0
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-14-generic
uuid 11d8c726-579e-4b4e-8d83-00ce6aa608a0
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=11d8c726-579e-4b4e-8d83-00ce6aa608a0 ro quiet splash
initrd /boot/initrd.img-2.6.28-14-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid 11d8c726-579e-4b4e-8d83-00ce6aa608a0
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=11d8c726-579e-4b4e-8d83-00ce6aa608a0 ro single
initrd /boot/initrd.img-2.6.28-14-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 11d8c726-579e-4b4e-8d83-00ce6aa608a0
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=11d8c726-579e-4b4e-8d83-00ce6aa608a0 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 11d8c726-579e-4b4e-8d83-00ce6aa608a0
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=11d8c726-579e-4b4e-8d83-00ce6aa608a0 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 11d8c726-579e-4b4e-8d83-00ce6aa608a0
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
samordi@samordi-desktop:~$
Hors ligne
#5 Le 29/07/2009, à 21:59
- Nasman
Re : SOS démarrage windows impossible aprés installation linux
Deux raisons pour que cela ne marche pas:
- Windows n'est pas sur une partition primaire
- tu n'as pas d'entrée Windows dans ton menu.lst
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#6 Le 29/07/2009, à 22:01
- samordi
Re : SOS démarrage windows impossible aprés installation linux
Merci beaucoup Nasman.
Je crois que je vais recommencer un formatage et réinstaller windows puis Linux.
Je me replonge dans les tuto.
merci beaucoup.
Hors ligne
#7 Le 29/07/2009, à 22:03
- Nasman
Re : SOS démarrage windows impossible aprés installation linux
Si tu réinstalles, fais 3 partitions pour le système, pour le swap et pour le /home
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#8 Le 29/07/2009, à 22:11
- samordi
Re : SOS démarrage windows impossible aprés installation linux
Ok mais ces 3 partitions c"est uniquement pour Linux?
je crois que je vais encore lire les tutos afin de bien comprendre le fonctionnement de l'instal.
Hors ligne