Pages : 1
#1 Le 17/03/2017, à 15:27
- adrenalinos
Pb BOOT apres coupure de courant [résolu]
panique a bord .. ici boot depuis cle usb avec kubuntu 14.04 .. clavier qwerty au lieu d azerty
mon bios a ete reinitialise .. UEFI au lieu de Legacy.. j ai remis Legacy mais ca ne boote plus
meme l acces aux disques/partitions est compromis - exemple :
An error occurred while accessing 'OS', the system responded: The requested operation has failed: Error mounting /dev/sdb5 at /media/kubuntu/OS:
Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=999,gid=999,dmask=0077,fmask=0177" "/dev/sdb5" "/media/kubuntu/OS"'
exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount. Failed to mount '/dev/sdb5': Operation not permitted The NTFS partition is in an unsafe state.
Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option.
je ne sais que faire
Please HELP
un lien vers un tuto pour tenter de restaurer le secteur de boot?
Dernière modification par adrenalinos (Le 17/03/2017, à 19:28)
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#2 Le 17/03/2017, à 16:01
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
je viens d essayer un boot repair.. mais ca me sort
The current session is in Legacy mode. Please reboot the computer, and use this software in an EFI session.
This will enable this feature. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd),
after making sure your BIOS is set up to boot USB in EFI mode.
... je pedale dans la semoule ... quoi faire? (a priori si je remets UEFI ca boote Windows direct!)
+ boot repqir info . http://paste.ubuntu.com/24195466/
Dernière modification par adrenalinos (Le 17/03/2017, à 16:12)
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#3 Le 17/03/2017, à 16:13
- Laurent85
Re : Pb BOOT apres coupure de courant [résolu]
Depuis ta session live génère un rapport bisnext et donne le lien pour accéder au rapport, c'est la première ligne du rapport. Ouvre un terminal et copie-colle les commandes suivantes une par une dans le terminal, exécute la commande puis commande suivante :
setxkbmap fr
sudo apt update
sudo apt install gawk mesa-utils pastebinit smartmontools --no-install-recommends
wget https://github.com/laurent85v/bisnext/raw/master/bisnext
sudo bash bisnext --pastebin
Hors ligne
#4 Le 17/03/2017, à 16:23
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
nb: ça m'a généré le rapport directement dans LibreOfficeWriter :
bisnext report id e2fd3 also available at http://slexy.org/view/s210zBGKqe
bisnext 0.01
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi /efi/ubuntu/fwupx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/MokManager.efi
/efi/ubuntu/shimx64.efi /efi/Dell/Boot/bootmgfw.efi
/efi/Dell/Boot/bootmgr.efi /efi/Dell/Boot/bootx64.efi
/efi/Dell/Boot/memtest.efi
/efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/memtest.efi
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdb4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Windows/System32/winload.exe
sdb6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb8: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22
Boot sector info: Syslinux looks at sector 4355736 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the /
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/efi/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 264,191 262,144 Microsoft Reserved Partition (Windows)
/dev/sda2 1,919,969,280 1,953,523,711 33,554,432 Swap partition (Linux)
/dev/sda3 264,192 464,832,511 464,568,320 Data partition (Linux)
/dev/sda4 464,832,512 1,919,969,279 1,455,136,768 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 512.1 GB, 512110190592 bytes
255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,000,215,215 1,000,215,215 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,026,047 1,024,000 EFI System partition
/dev/sdb2 R 1,026,048 1,107,967 81,920 -
/dev/sdb3 1,107,968 1,370,111 262,144 Microsoft Reserved Partition (Windows)
/dev/sdb4 R 1,370,112 5,564,415 4,194,304 Windows Recovery Environment (Windows)
/dev/sdb5 5,564,416 209,680,383 204,115,968 Data partition (Windows/Linux)
/dev/sdb6 209,680,384 317,392,895 107,712,512 Data partition (Linux)
/dev/sdb7 R 979,052,544 1,000,213,167 21,160,624 Windows Recovery Environment (Windows)
/dev/sdb8 317,392,896 979,052,543 661,659,648 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 8022 MB, 8022654976 bytes
94 heads, 14 sectors/track, 11906 cylinders, total 15669248 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 63 15,669,247 15,669,185 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda2 14ea1530-b7d8-4599-8e42-ac23298ad99b swap
/dev/sda3 c4ea9937-a77b-402a-9dce-a7d6c0eea697 ext4
/dev/sda4 782E9C6D4831E310 ntfs DATA2
/dev/sdb1 843F-9784 vfat ESP
/dev/sdb2 7294-AFA0 vfat DIAGS
/dev/sdb4 225E95DD5E95A9D5 ntfs WINRETOOLS
/dev/sdb5 8406A2B706A2A99E ntfs OS
/dev/sdb6 4635899b-690a-4f1d-8ce4-f266a2dd0afe ext4
/dev/sdb7 2E304ECC304E9B2B ntfs PBR Image
/dev/sdb8 0D2ED9CC177AF8BF ntfs DATA1
/dev/sdc1 A62F-DB7E vfat KUBUNTU
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Mar 17 14:10 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 3 12:50 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 3 12:50 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 3 12:50 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Mar 17 14:10 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 Mar 17 14:10 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 Jan 3 12:50 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 10 Mar 17 14:10 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part7 -> ../../sdb7
lrwxrwxrwx 1 root root 10 Mar 17 14:10 ata-LITEONIT_LGT-512L9G-11_M.2_2280_512GB_TW0686M7550854AS0146-part8 -> ../../sdb8
lrwxrwxrwx 1 root root 9 Mar 17 14:10 ata-TOSHIBA_MQ01ABD100_15MQTGO5T -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 3 12:50 ata-TOSHIBA_MQ01ABD100_15MQTGO5T-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 3 12:50 ata-TOSHIBA_MQ01ABD100_15MQTGO5T-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 3 12:50 ata-TOSHIBA_MQ01ABD100_15MQTGO5T-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Mar 17 14:10 ata-TOSHIBA_MQ01ABD100_15MQTGO5T-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Mar 17 14:10 usb-General_USB_Flash_Disk_0126000000000569-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jan 3 12:50 usb-General_USB_Flash_Disk_0126000000000569-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Mar 17 14:10 wwn-0x5000039601c86e26 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 3 12:50 wwn-0x5000039601c86e26-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 3 12:50 wwn-0x5000039601c86e26-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 3 12:50 wwn-0x5000039601c86e26-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Mar 17 14:10 wwn-0x5000039601c86e26-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda3 /media/kubuntu/c4ea9937-a77b-402a-9dce-a7d6c0eea697 ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sdb2 /media/kubuntu/DIAGS vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,flush,uhelper=udisks2)
/dev/sdb6 /media/kubuntu/4635899b-690a-4f1d-8ce4-f266a2dd0afe ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
linux /boot/vmlinuz-4.4.0-67-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-67-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
menuentry 'Ubuntu, with Linux 4.4.0-67-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-67-generic-advanced-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-67-generic ...'
linux /boot/vmlinuz-4.4.0-67-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-67-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-67-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-67-generic-init-upstart-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-67-generic ...'
linux /boot/vmlinuz-4.4.0-67-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-67-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-67-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-67-generic-recovery-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-67-generic ...'
linux /boot/vmlinuz-4.4.0-67-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-67-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-66-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-66-generic-advanced-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-66-generic ...'
linux /boot/vmlinuz-4.4.0-66-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-66-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-66-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-66-generic-init-upstart-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-66-generic ...'
linux /boot/vmlinuz-4.4.0-66-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-66-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-66-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-66-generic-recovery-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-66-generic ...'
linux /boot/vmlinuz-4.4.0-66-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-66-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-64-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-64-generic-advanced-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-64-generic ...'
linux /boot/vmlinuz-4.4.0-64-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-64-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-64-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-64-generic-init-upstart-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-64-generic ...'
linux /boot/vmlinuz-4.4.0-64-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-64-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-64-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-64-generic-recovery-4635899b-690a-4f1d-8ce4-f266a2dd0afe' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt6 --hint-efi=hd1,gpt6 --hint-baremetal=ahci1,gpt6 4635899b-690a-4f1d-8ce4-f266a2dd0afe
else
search --no-floppy --fs-uuid --set=root 4635899b-690a-4f1d-8ce4-f266a2dd0afe
fi
echo 'Loading Linux 4.4.0-64-generic ...'
linux /boot/vmlinuz-4.4.0-64-generic.efi.signed root=UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-64-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-efi-843F-9784' {
insmod part_gpt
insmod fat
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 843F-9784
else
search --no-floppy --fs-uuid --set=root 843F-9784
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb6 during installation
UUID=4635899b-690a-4f1d-8ce4-f266a2dd0afe / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=843F-9784 /boot/efi vfat defaults 0 1
# /home was on /dev/sda3 during installation
UUID=c4ea9937-a77b-402a-9dce-a7d6c0eea697 /home ext4 defaults 0 2
# swap was on /dev/sda2 during installation
UUID=14ea1530-b7d8-4599-8e42-ac23298ad99b none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
113.431613922 = 121.796268032 boot/grub/grub.cfg 1
137.130622864 = 147.242885120 boot/vmlinuz-4.4.0-64-generic 1
137.661872864 = 147.813310464 boot/vmlinuz-4.4.0-64-generic.efi.signed 1
117.114997864 = 125.751271424 boot/vmlinuz-4.4.0-66-generic 1
117.857185364 = 126.548189184 boot/vmlinuz-4.4.0-66-generic.efi.signed 2
126.693119049 = 136.035700736 boot/vmlinuz-4.4.0-67-generic 1
136.388431549 = 146.445963264 boot/vmlinuz-4.4.0-67-generic.efi.signed 2
126.693119049 = 136.035700736 vmlinuz 1
117.114997864 = 125.751271424 vmlinuz.old 1
137.725582123 = 147.881717760 boot/initrd.img-4.4.0-64-generic 3
117.819332123 = 126.507544576 boot/initrd.img-4.4.0-66-generic 5
136.501258850 = 146.567110656 boot/initrd.img-4.4.0-67-generic 2
136.501258850 = 146.567110656 initrd.img 2
117.819332123 = 126.507544576 initrd.img.old 5
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Start Kubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdc1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Start Kubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry2
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry3
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry4
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry5
menu label Start Kubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash --
label ubnentry6
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/kubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
label ubnentry7
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown GPT Partiton Type
d3ad6b79bf6b9f4db631466eb71a4965
==================================== inxi report: ==============================
System: Kernel: 3.16.0-30-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: N/A dm: lightdm Distro: Ubuntu 14.04.2 LTS
Battery BAT1: charge: 58.7 Wh 100.0% condition: 58.7/64.0 Wh (92%)
volts: 17.3/15.0
model: TOSHIBA PABAS0241231 status: Full
CPU: Quad core Intel Core i7-4980HQ (-HT-MCP-) cache: 6144 KB
bmips: 22388
clock speeds: min/max: 800/4000 MHz 1: 3135 MHz 2: 3174 MHz
3: 3010 MHz 4: 2977 MHz 5: 3034 MHz 6: 2858 MHz 7: 2941 MHz
8: 2809 MHz
CPU Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2
bmi1 bmi2 bts clflush cmov constant_tsc cx16 cx8 de ds_cpl dtes64
dtherm dts eagerfpu epb ept erms est f16c flexpriority fma fpu
fsgsbase fxsr ht ida invpcid lahf_lm lm mca mce mmx monitor movbe
msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdtscp
rep_good sep smep smx ss sse sse2 sse4_1 sse4_2 ssse3 syscall tm
tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid
x2apic xsave xsaveopt xtopology xtpr
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: JDIMM1 size: 8 GB speed: 1600 MHz type: DDR3
manufacturer: Samsung part: M471B1G73BH0-YK0
Device-2: JDIMM2 size: 8 GB speed: 1600 MHz type: DDR3
manufacturer: Samsung part: M471B1G73BH0-YK0
Device-3: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-4: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Graphics: Card-1: Intel Crystal Well Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:0d26
Card-2: NVIDIA Device 13d7 bus-ID: 01:00.0 chip-ID: 10de:13d7
Display Server: X.Org 1.16.0 drivers: intel (unloaded: modesetting,fbdev,vesa)
tty size: 1920x1080@60.0hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 10.3.2 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:8c20
Card-2 Intel Crystal Well HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:0d0c
Sound: Advanced Linux Sound Architecture v: k3.16.0-30-generic
Network: Card-1: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller
driver: alx port: d000 bus-ID: 02:00.0 chip-ID: 1969:e091
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Qualcomm Atheros Device 003e
bus-ID: 03:00.0 chip-ID: 168c:003e
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Card-3: Atheros usb-ID: 003-005 chip-ID: 0cf3:3004
IF: null-if-id state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 1520.3GB (11.7% used)
ID-1: /dev/sda model: TOSHIBA_MQ01ABD1 size: 1000.2GB
ID-2: /dev/sdb model: LITEONIT_LGT size: 512.1GB
ID-3: USB /dev/sdc model: USB_Flash_Disk size: 8.0GB
Optical: No optical drives detected.
Partition: ID-1: / size: 7.8G used: 734M (10%) fs: overlayfs dev: /dev/cow
label: N/A uuid: N/A
ID-2: /cdrom size: 7.5G used: 5.4G (72%) fs: vfat dev: /dev/sdc1
label: KUBUNTU uuid: A62F-DB7E
ID-3: /media/kubuntu/4635899b-690a-4f1d-8ce4-f266a2dd0afe size: 51G used: 14G (29%) fs: ext4 dev: /dev/sdb6
label: N/A uuid: 4635899b-690a-4f1d-8ce4-f266a2dd0afe
ID-4: /media/kubuntu/c4ea9937-a77b-402a-9dce-a7d6c0eea697 size: 218G used: 132G (64%) fs: ext4 dev: /dev/sda3
label: N/A uuid: c4ea9937-a77b-402a-9dce-a7d6c0eea697
ID-5: /media/kubuntu/DIAGS size: 36M used: 512 (1%) fs: vfat dev: /dev/sdb2
label: DIAGS uuid: 7294-AFA0
ID-6: swap-1 size: 17.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
label: N/A uuid: 14ea1530-b7d8-4599-8e42-ac23298ad99b
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 0.13G label: N/A uuid: N/A
ID-2: /dev/sda4 size: 745.03G label: DATA2 uuid: 782E9C6D4831E310
ID-3: /dev/sdb1 size: 0.52G label: ESP uuid: 843F-9784
ID-4: /dev/sdb3 size: 0.13G label: N/A uuid: N/A
ID-5: /dev/sdb4 size: 2.15G
label: WINRETOOLS uuid: 225E95DD5E95A9D5
ID-6: /dev/sdb5 size: 104.51G label: OS uuid: 8406A2B706A2A99E
ID-7: /dev/sdb7 size: 10.83G
label: PBR Image uuid: 2E304ECC304E9B2B
ID-8: /dev/sdb8 size: 338.77G label: DATA1 uuid: 0D2ED9CC177AF8BF
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Kubuntu 14.04.2 LTS _Trusty Tahr_ - Release amd64 (20150219.1)]/ trusty main multiverse restricted universe
deb http://archive.ubuntu.com/ubuntu/ trusty main restricted universe
deb http://security.ubuntu.com/ubuntu/ trusty-security main restricted universe
deb http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe
Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-boot-repair-trusty.list
deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu trusty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 5.1% command: bash pid: 1496 mem: 4.68MB (0.0%)
2: cpu: 1.4% command: firefox pid: 5295 mem: 246.69MB (1.5%)
3: cpu: 1.0% command: systemsettings pid: 5394 mem: 136.78MB (0.8%)
4: cpu: 0.9% command: X pid: 4658 mem: 91.81MB (0.5%)
5: cpu: 0.7% command: kwin pid: 5042 mem: 82.83MB (0.5%)
6: cpu: 0.4% command: plasma-desktop pid: 5052 mem: 159.38MB (1.0%)
7: cpu: 0.2% command: bash pid: 16364 mem: 8.70MB (0.0%)
8: cpu: 0.1% command: konsole pid: 5841 mem: 44.73MB (0.2%)
9: cpu: 0.1% command: dolphin pid: 5198 mem: 78.80MB (0.4%)
10: cpu: 0.0% command: bash pid: 23700 mem: 6.88MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 246.69MB (1.5%) command: firefox pid: 5295 cpu: 1.4%
2: mem: 159.38MB (1.0%) command: plasma-desktop pid: 5052 cpu: 0.4%
3: mem: 136.78MB (0.8%) command: systemsettings pid: 5394 cpu: 1.0%
4: mem: 133.53MB (0.8%) command: kdeinit4: pid: 4994 cpu: 0.0%
5: mem: 91.81MB (0.5%) command: X pid: 4658 cpu: 0.9%
6: mem: 82.83MB (0.5%) command: kwin pid: 5042 cpu: 0.7%
7: mem: 78.80MB (0.4%) command: dolphin pid: 5198 cpu: 0.1%
8: mem: 66.57MB (0.4%) command: krunner pid: 5131 cpu: 0.0%
9: mem: 64.82MB (0.4%) command: kate pid: 5653 cpu: 0.0%
10: mem: 50.46MB (0.3%) command: glade2script (started by: python) pid: 16354 cpu: 0.0%
Info: Processes: 249 Uptime: 1:28 Memory: 1069.4/15934.3MB
Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: N/A
Client: Shell (bash 4.3.111 running in bash) inxi: 2.3.8
=================================== rfkill: ===================================
=================================== lsusb: ====================================
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 0cf3:3004 Atheros Communications, Inc.
Bus 003 Device 004: ID 187c:0528 Alienware Corporation
Bus 003 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 003 Device 006: ID 0c45:6708 Microdia
Bus 003 Device 002: ID 6557:8003
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/14p, 480M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 9: Dev 5, If 0, Class=Wireless, Driver=, 12M
|__ Port 9: Dev 5, If 1, Class=Wireless, Driver=, 12M
|__ Port 13: Dev 6, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 13: Dev 6, If 1, Class=Video, Driver=uvcvideo, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
===================================== cmdline: ================================
initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity quiet splash -- BOOT_IMAGE=/ubnkern
================================== locales: ===================================
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: be
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
====================================== Modules: ================================
Module Size Used by
btrfs 899462 0
xor 21411 1 btrfs
raid6_pq 97812 1 btrfs
ufs 74854 0
qnx4 13315 0
hfsplus 102897 0
hfs 54677 0
minix 36140 0
ntfs 97300 0
msdos 17332 0
jfs 181369 0
xfs 909585 0
libcrc32c 12644 1 xfs
x86_pkg_temp_thermal 14205 0
intel_powerclamp 18823 0
coretemp 13441 0
kvm_intel 143590 0
dm_crypt 23216 0
uvcvideo 81073 0
kvm 452043 1 kvm_intel
videobuf2_vmalloc 13216 1 uvcvideo
snd_hda_codec_ca0132 53571 1
videobuf2_memops 13362 1 videobuf2_vmalloc
videobuf2_core 59104 1 uvcvideo
snd_hda_codec_hdmi 47548 1
v4l2_common 15681 1 videobuf2_core
videodev 153793 3 uvcvideo,v4l2_common,videobuf2_core
snd_hda_intel 30469 10
snd_hda_controller 31056 1 snd_hda_intel
crct10dif_pclmul 14307 0
media 21903 2 uvcvideo,videodev
snd_hda_codec 139682 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller,snd_hda_codec_ca0132
snd_soc_rt5640 93042 0
crc32_pclmul 13133 0
ghash_clmulni_intel 13230 0
dell_wmi 12761 0
aesni_intel 152552 0
snd_soc_rl6231 13037 1 snd_soc_rt5640
snd_hwdep 17698 1 snd_hda_codec
sparse_keymap 13948 1 dell_wmi
snd_seq_midi 13564 0
aes_x86_64 17131 1 aesni_intel
snd_soc_core 200204 1 snd_soc_rt5640
snd_seq_midi_event 14899 1 snd_seq_midi
lrw 13286 1 aesni_intel
snd_rawmidi 30876 1 snd_seq_midi
gf128mul 14951 1 lrw
dm_multipath 22843 0
bnep 19624 2
snd_seq 63074 2 snd_seq_midi_event,snd_seq_midi
snd_compress 19200 1 snd_soc_core
scsi_dh 14882 1 dm_multipath
snd_pcm_dmaengine 15172 1 snd_soc_core
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_pcm 104112 7 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller,snd_pcm_dmaengine
glue_helper 13990 1 aesni_intel
ath3k 13331 0
joydev 17393 0
rtsx_pci_ms 18168 0
btusb 32497 0
snd_timer 29562 2 snd_pcm,snd_seq
i2c_hid 18726 0
ablk_helper 13597 1 aesni_intel
i2c_designware_platform 12979 0
memstick 16966 1 rtsx_pci_ms
mei_me 19696 0
serio_raw 13483 0
rfcomm 69509 0
cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd 79468 32 snd_soc_core,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_compress,snd_hda_codec_ca0132
lpc_ich 21093 0
mei 87875 1 mei_me
int3403_thermal 12967 0
bluetooth 446409 12 bnep,ath3k,btusb,rfcomm
parport_pc 32741 0
soundcore 15047 2 snd,snd_hda_codec
i2c_designware_core 14768 1 i2c_designware_platform
dw_dmac 12835 0
shpchp 37047 0
ppdev 17671 0
dw_dmac_core 28390 1 dw_dmac
8250_dw 13551 0
snd_soc_sst_acpi 13007 0
lp 17759 0
spi_pxa2xx_platform 23079 0
mac_hid 13227 0
6lowpan_iphc 18702 1 bluetooth
acpi_pad 17942 0
parport 42348 3 lp,ppdev,parport_pc
squashfs 48362 1
overlayfs 27916 1
nls_iso8859_1 12713 2
dm_mirror 22135 0
dm_region_hash 20862 1 dm_mirror
dm_log 18411 2 dm_region_hash,dm_mirror
hid_generic 12559 0
usbhid 52616 0
hid 110426 3 i2c_hid,hid_generic,usbhid
uas 23159 0
usb_storage 66545 2 uas
rtsx_pci_sdmmc 23043 0
nouveau 1206577 0
i915 905798 6
mxm_wmi 13021 1 nouveau
psmouse 106561 0
i2c_algo_bit 13413 2 i915,nouveau
ttm 85314 1 nouveau
drm_kms_helper 61574 2 i915,nouveau
ahci 34062 4
drm 311018 7 ttm,i915,drm_kms_helper,nouveau
libahci 32424 1 ahci
alx 36817 0
rtsx_pci 46259 2 rtsx_pci_ms,rtsx_pci_sdmmc
mdio 13561 1 alx
sdhci_acpi 13351 0
wmi 19193 3 dell_wmi,mxm_wmi,nouveau
video 20128 2 i915,nouveau
sdhci 43685 1 sdhci_acpi
============================== Additional drivers: =============================
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd000013D7sv00001028sd00000688bc03sc02i00
vendor : NVIDIA Corporation
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-367 - distro non-free recommended
============================= Upgradable packages: =============================
Live Session
================================ Broken packages: ==============================
Live Session
======================== Package configuration pending: ========================
None
========================== Package install interrupted: ========================
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 519 not upgraded.
========================= UEFI Boot Manager settings: ==========================
Fatal: Couldn't open either sysfs or procfs directories for accessing EFI variables.
Try 'modprobe efivars' as root.
================================== Secure Boot: ================================
Secure Boot disabled or not supported on this system.
============================= md5sum of efi files: =============================
EFI files in /dev/sdb1:
89eee1b88c9b1c7627841fe280200042 /EFI/Microsoft/Boot/bootmgr.efi
f7628ccdc692b41fc7f3e09475b03f7e /EFI/Microsoft/Boot/memtest.efi
6514d19c16df6d0d9cf75bba91350dcc /EFI/Microsoft/Boot/bootmgfw.efi
6514d19c16df6d0d9cf75bba91350dcc /EFI/Boot/bootx64.efi
11ca417bc767273a9de7b1355cb2908e /EFI/Dell/Boot/bootmgfw.efi
0e8c3f80540472c7f7ad9a83e2b027ff /EFI/Dell/Boot/bootmgr.efi
11ca417bc767273a9de7b1355cb2908e /EFI/Dell/Boot/bootx64.efi
255f811199c3d5a80eb9ef69df35c63a /EFI/Dell/Boot/memtest.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/ubuntu/shimx64.efi
431681ef094d1d7bebd85f742ceb8cbe /EFI/ubuntu/grubx64.efi
ba8a7979ac57f1c0c307ef94d1020eb8 /EFI/ubuntu/MokManager.efi
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
============================ Disks SMART attributes: ===========================
### ATA disks: sdb sda
# Drive sdb:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEONIT LGT-512L9G-11 M.2 2280 512GB
Firmware Version: HG9110C
User Capacity: 512,110,190,592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 17 14:18:50 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 11540
12 Power_Cycle_Count PO---- 100 100 000 - 253
175 Program_Fail_Count_Chip PO---- 100 100 000 - 0
176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0
177 Wear_Leveling_Count PO---- 100 100 000 - 4565
178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 005 - 1344
181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
187 Reported_Uncorrect PO---- 100 100 000 - 0
195 Hardware_ECC_Recovered PO---- 100 100 000 - 0
241 Total_LBAs_Written PO---- 100 100 000 - 38607
242 Total_LBAs_Read PO---- 100 100 000 - 56288
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 0
No Errors Logged
# Drive sda:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
LU WWN Device Id: 5 000039 601c86e26
Firmware Version: AX0P2D
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 17 14:18:50 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 128
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1570
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 060 060 000 - 16398
12 Power_Cycle_Count -O--CK 100 100 000 - 253
191 G-Sense_Error_Rate -O--CK 100 100 000 - 122
192 Power-Off_Retract_Count -O--CK 100 100 000 - 20
193 Load_Cycle_Count -O--CK 100 100 000 - 3535
194 Temperature_Celsius -O---K 100 100 000 - 31 (Min/Max 13/51)
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 164481403
200 Multi_Zone_Error_Rate -O--CK 100 100 000 - 605144375
240 Head_Flying_Hours -O--CK 063 063 000 - 14930
241 Total_LBAs_Written -O--CK 100 100 000 - 18714229286
242 Total_LBAs_Read -O--CK 100 100 000 - 38161058513
254 Free_Fall_Sensor -O--CK 100 100 000 - 6
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdc
# Drive sdc:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages: ===============================
No volume groups found
Dernière modification par adrenalinos (Le 17/03/2017, à 16:26)
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#5 Le 17/03/2017, à 16:40
- Laurent85
Re : Pb BOOT apres coupure de courant [résolu]
Démarre le live usb en mode efi et lance un boot-repair,
vérifie d'abord les systèmes de fichiers ext4 :
sudo fsck -fv /dev/sda3
sudo fsck -fv /dev/sdb6
vérifie que tu es en mode efi, dans un terminal :
[ -d /sys/firmware/efi ] && echo "UEFI mode: Yes" || echo "UEFI mode: No"
installe et lance boot-repair :
sudo add-apt-repository ppa:yannubuntu/boot-repair
sudo apt update
sudo apt install -y --install-recommends boot-repair
boot-repair
Hors ligne
#6 Le 17/03/2017, à 17:15
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
Well!! ça ne veut pas booter en efi ! (essayé plusieurs fois, en remettant le mode de boot en UEFI dans le bios, puis Legacy.. chaque fois en choisissant F12 Boot Option pour booter sur la clé en mode UEFI)
ça me dit (je n'ai noté que la dernière ligne):
---[ end Kernel panic - not syncing: UFS: Unable to mount root fs on unknown block (1,0)
(je suis repassé en Legacy, boot par défaut.. sur ma clé USB live)
??? il y aurait une astuce qui m'échappe pour faire booter en EFI sur la clé USB?
ps:
info de ma clé USB:
Kubuntu 14.04
KDELibs Version: 4.13.3
Qt Version: 4.8.6
Kernel Version: 3.16.0-30-generic
OS Type: 64-bit
Dernière modification par adrenalinos (Le 17/03/2017, à 17:27)
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#7 Le 17/03/2017, à 17:32
- Laurent85
Re : Pb BOOT apres coupure de courant [résolu]
Mets la clé usb et à partir du bios il y a peut-être dans les menus le moyen de sélectionner la clé usb pour démarrer en uefi. Ou c'est la clé usb créée qui n'a pas le code uefi pour démarrer dans ce mode. Tu l'as crée comment la clé usb ? Utilise Rufus sous Windows avec les options par défaut ou sous ubuntu tu peux utiliser dd, ou l'outil de création de disque de démarrage.
Hors ligne
#8 Le 17/03/2017, à 17:41
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
merci, je vais essayer de refaire une clé USB avec "Make Startup Disk"...
mais où vais-je trouver un fichier iso adéquat?
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#9 Le 17/03/2017, à 17:44
- Laurent85
Re : Pb BOOT apres coupure de courant [résolu]
L'iso a le code efi, prends celle tu as déjà ou télécharge une iso plus récente depuis le site d'Ubuntu.
Hors ligne
#10 Le 17/03/2017, à 17:47
- Bougron
Re : Pb BOOT apres coupure de courant [résolu]
Bonjour
La cle USB est parfaitement générée pour booter en EFI
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22
Boot sector info: Syslinux looks at sector 4355736 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the /
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/efi/BOOT/grubx64.efi /ldlinux.sys
et tu n'as jamais booté en LEGACY !!!!
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
Il faut que tu bootes en mode recovery et que tu réinstalles le logiciel qui est incohérent
---[ end Kernel panic - not syncing: UFS: Unable to mount root fs on unknown block (1,0)
Je ne sais pas trop lequel pour le moment.
N'aurais-tu pas eu un message juste avant cette erreur?
Le plus simple est déjà de choisir un noyau ancien
menuentry 'Ubuntu, with Linux 4.4.0-64-generic (recovery mode).
qui peut certainement fonctionner. Ce qui te permettra de booter normalement et de finaliser la mise à jour des applications de démarrage qui s'est probablement mal terminée? -ou bug de l'outil?
========================= UEFI Boot Manager settings: ==========================
Fatal: Couldn't open either sysfs or procfs directories for accessing EFI variables.
Try 'modprobe efivars' as root.
Bonjour Laurent85. Je ne sais pas si c'est toi qui manage cet outil que je ne connais pas. Il scanne rapidement assez large mais il oublie de donner le contenu du fichier /efi/ubuntu/grub.cfg
Dernière modification par Bougron (Le 17/03/2017, à 18:23)
Hors ligne
#11 Le 17/03/2017, à 18:37
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
je me suis refait une clé avec "kubuntu-16.04.2-desktop-amd64.iso", et je vais reessayer..
mais je ne comprends pas "Il faut que tu bootes en mode recovery et que tu réinstalles le logiciel qui est incohérent" .. booter en mode recovery? sur la clé? (?).. parce que je n'ai plus de Grub! (en mode UEFI ça boote Windows, dont je ne connais plus le mot de passe! [je n'ai plus jamais utilisé ce windows!]... si je me souviens bien, pour installer linux en dual-boot, j'ai dû passer en mode Legacy, pas de Secure Boot, etc.)
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#12 Le 17/03/2017, à 18:51
- Laurent85
Re : Pb BOOT apres coupure de courant [résolu]
Ubuntu est installé en mode uefi, pas en Legacy. Il faut que tu trouves le moyen de booter en mode uefi. Tu as inséré la clé usb et regardé dans les menus du bios pour démarrer dessus, ou via le menu boot options de démarrage s'il existe (touche F12 ou une autre suivant les pc).
Hors ligne
#13 Le 17/03/2017, à 18:53
- Bougron
Re : Pb BOOT apres coupure de courant [résolu]
Désolé. J'ai mélangé le message kernel panic qui provenait de ta clé USB en croyant qu'il provenait de ton ubuntu installé.
Si c'est windows qui met directement en route, Sers-toi de windows pour mettre en route ubuntu.
mais avant, dans windows, il faut qu'en ligne de commandes administrative, tu supprimes l'hibernation
powercfg /h,off
afin que ta partition NTFS puisse monter tranquillement et ne plus sortir ce message d'erreur
Please resume and shutdown Windows fully (no hibernation or fast restarting)
puis tu demandes à windows de lancer ubuntu https://forum.ubuntu-fr.org/viewtopic.php?id=1407471
Lorsque la grille de choix de ubuntu est proposée, tu choisis le mode recovery pour faire vérifier les partitions EXT4
Ajout, Je viens de voir que tu ne sais pas te servir de windows, Supprimes donc toutes les partions NTFS présentes.
Dernière modification par Bougron (Le 17/03/2017, à 18:58)
Hors ligne
#14 Le 17/03/2017, à 18:55
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
ok, démarré en UEFI sur la nouvelle clé ->
kubuntu@kubuntu:~$ sudo fsck -fv /dev/sda3
fsck from util-linux 2.27.1
e2fsck 1.42.13 (17-May-2015)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
105143 inodes used (0.72%, out of 14524416)
826 non-contiguous files (0.8%)
46 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 104811/187/1
35415145 blocks used (60.99%, out of 58071040)
0 bad blocks
7 large files
100320 regular files
4667 directories
0 character device files
0 block device files
0 fifos
0 links
146 symbolic links (135 fast symbolic links)
1 socket
------------
105134 files
kubuntu@kubuntu:~$ sudo fsck -fv /dev/sdb6
fsck from util-linux 2.27.1
e2fsck 1.42.13 (17-May-2015)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
425594 inodes used (12.64%, out of 3366912)
317 non-contiguous files (0.1%)
669 non-contiguous directories (0.2%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 388044/140
3877360 blocks used (28.80%, out of 13464064)
0 bad blocks
1 large file
345860 regular files
37080 directories
57 character device files
25 block device files
0 fifos
213 links
42474 symbolic links (37231 fast symbolic links)
89 sockets
------------
425798 files
kubuntu@kubuntu:~$ [ -d /sys/firmware/efi ] && echo "UEFI mode: Yes" || echo "UEFI mode: No"
UEFI mode: Yes
kubuntu@kubuntu:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
Simple tool to repair frequent boot problems.
Website: https://sourceforge.net/p/boot-repair/home
More info: https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair
Press [ENTER] to continue or ctrl-c to cancel adding it
gpg: keyring `/tmp/tmp6_3nhnwk/secring.gpg' created
gpg: keyring `/tmp/tmp6_3nhnwk/pubring.gpg' created
gpg: requesting key 60D8DA0B from hkp server keyserver.ubuntu.com
gpg: /tmp/tmp6_3nhnwk/trustdb.gpg: trustdb created
gpg: key 60D8DA0B: public key "Launchpad PPA for YannUbuntu" imported
gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)
OK
kubuntu@kubuntu:~$ sudo apt update
Ign:1 cdrom://Kubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215) xenial InRelease
Hit:2 cdrom://Kubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215) xenial Release
Get:4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial InRelease [17.5 kB]
Hit:5 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:6 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]
Get:8 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 Packages [1,876 B]
Get:9 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main Translation-en [2,092 B]
Fetched 226 kB in 0s (816 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
122 packages can be upgraded. Run 'apt list --upgradable' to see them.
kubuntu@kubuntu:~$ sudo apt install -y --install-recommends boot-repair
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
boot-sav boot-sav-extra gawk gcr gir1.2-atk-1.0 gir1.2-freedesktop gir1.2-gdkpixbuf-2.0 gir1.2-gtk-3.0
gir1.2-pango-1.0 gksu glade2script gnome-keyring libgck-1-0 libgcr-3-common libgcr-base-3-1 libgcr-ui-3-1
libgksu2-0 libgnome-keyring-common libgnome-keyring0 libgtop-2.0-10 libgtop2-common
libp11-kit-gnome-keyring libpam-gnome-keyring libpangoxft-1.0-0 libsigsegv2 p11-kit p11-kit-modules
pastebinit pinentry-gnome3 python-gi syslinux-common
Suggested packages:
mbr mdadm clean-ubiquity boot-info os-uninstaller gawk-doc pinentry-doc python-gi-cairo
The following NEW packages will be installed:
boot-repair boot-sav boot-sav-extra gawk gcr gir1.2-atk-1.0 gir1.2-freedesktop gir1.2-gdkpixbuf-2.0
gir1.2-gtk-3.0 gir1.2-pango-1.0 gksu glade2script gnome-keyring libgck-1-0 libgcr-3-common libgcr-base-3-1
libgcr-ui-3-1 libgksu2-0 libgnome-keyring-common libgnome-keyring0 libgtop-2.0-10 libgtop2-common
libp11-kit-gnome-keyring libpam-gnome-keyring libpangoxft-1.0-0 libsigsegv2 p11-kit p11-kit-modules
pastebinit pinentry-gnome3 python-gi syslinux-common
0 upgraded, 32 newly installed, 0 to remove and 122 not upgraded.
Need to get 4,199 kB of archives.
After this operation, 19.0 MB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 libsigsegv2 amd64 2.10-4 [14.1 kB]
Get:2 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 glade2script all 3.2.3~ppa1 [36.8 kB]
Get:3 http://security.ubuntu.com/ubuntu xenial-security/main amd64 gir1.2-gdkpixbuf-2.0 amd64 2.32.2-1ubuntu1.2 [8,088 B]
Get:4 http://archive.ubuntu.com/ubuntu xenial/main amd64 gawk amd64 1:4.1.3+dfsg-0.1 [398 kB]
Get:5 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav all 4ppa40 [416 kB]
Get:6 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgck-1-0 amd64 3.18.0-1ubuntu1 [77.1 kB]
Get:7 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgcr-3-common all 3.18.0-1ubuntu1 [8,942 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgcr-base-3-1 amd64 3.18.0-1ubuntu1 [185 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgcr-ui-3-1 amd64 3.18.0-1ubuntu1 [141 kB]
Get:10 http://archive.ubuntu.com/ubuntu xenial/main amd64 gcr amd64 3.18.0-1ubuntu1 [48.3 kB]
Get:11 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 p11-kit-modules amd64 0.23.2-5~ubuntu16.04.1 [73.9 kB]
Get:12 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 p11-kit amd64 0.23.2-5~ubuntu16.04.1 [75.0 kB]
Get:13 http://archive.ubuntu.com/ubuntu xenial/main amd64 pinentry-gnome3 amd64 0.9.7-3 [32.3 kB]
Get:14 http://archive.ubuntu.com/ubuntu xenial/main amd64 gnome-keyring amd64 3.18.3-0ubuntu2 [585 kB]
Get:15 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgnome-keyring-common all 3.12.0-1build1 [5,792 B]
Get:16 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgnome-keyring0 amd64 3.12.0-1build1 [56.1 kB]
Get:17 http://archive.ubuntu.com/ubuntu xenial/main amd64 libp11-kit-gnome-keyring amd64 3.18.3-0ubuntu2 [41.6 kB]
Get:18 http://archive.ubuntu.com/ubuntu xenial/main amd64 libpam-gnome-keyring amd64 3.18.3-0ubuntu2 [36.5 kB]
Get:19 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-gi amd64 3.20.0-0ubuntu1 [194 kB]
Get:20 http://archive.ubuntu.com/ubuntu xenial/main amd64 gir1.2-atk-1.0 amd64 2.18.0-1 [17.6 kB]
Get:21 http://archive.ubuntu.com/ubuntu xenial/main amd64 gir1.2-freedesktop amd64 1.46.0-3ubuntu1 [5,742 B]
Get:22 http://archive.ubuntu.com/ubuntu xenial/main amd64 libpangoxft-1.0-0 amd64 1.38.1-1 [15.1 kB]
Get:23 http://archive.ubuntu.com/ubuntu xenial/main amd64 gir1.2-pango-1.0 amd64 1.38.1-1 [21.0 kB]
Get:24 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 gir1.2-gtk-3.0 amd64 3.18.9-1ubuntu3.2 [188 kB]
Get:25 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgtop2-common all 2.32.0-1 [10.1 kB]
Get:26 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgtop-2.0-10 amd64 2.32.0-1 [34.9 kB]
Get:27 http://archive.ubuntu.com/ubuntu xenial/universe amd64 libgksu2-0 amd64 2.0.13~pre1-6ubuntu8 [71.8 kB]
Get:28 http://archive.ubuntu.com/ubuntu xenial/universe amd64 gksu amd64 2.0.2-9ubuntu1 [51.5 kB]
Get:29 http://archive.ubuntu.com/ubuntu xenial/main amd64 pastebinit all 1.5-1 [14.6 kB]
Get:30 http://archive.ubuntu.com/ubuntu xenial/main amd64 syslinux-common all 3:6.03+dfsg-11ubuntu1 [1,181 kB]
Get:31 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-repair all 4ppa40 [11.6 kB]
Get:32 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav-extra all 4ppa40 [142 kB]
Fetched 4,199 kB in 1s (2,695 kB/s)
Extracting templates from packages: 100%
Selecting previously unselected package libsigsegv2:amd64.
(Reading database ... 162826 files and directories currently installed.)
Preparing to unpack .../libsigsegv2_2.10-4_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.10-4) ...
Setting up libsigsegv2:amd64 (2.10-4) ...
Processing triggers for libc-bin (2.23-0ubuntu5) ...
Selecting previously unselected package gawk.
(Reading database ... 162834 files and directories currently installed.)
Preparing to unpack .../gawk_1%3a4.1.3+dfsg-0.1_amd64.deb ...
Unpacking gawk (1:4.1.3+dfsg-0.1) ...
Selecting previously unselected package libgck-1-0:amd64.
Preparing to unpack .../libgck-1-0_3.18.0-1ubuntu1_amd64.deb ...
Unpacking libgck-1-0:amd64 (3.18.0-1ubuntu1) ...
Selecting previously unselected package libgcr-3-common.
Preparing to unpack .../libgcr-3-common_3.18.0-1ubuntu1_all.deb ...
Unpacking libgcr-3-common (3.18.0-1ubuntu1) ...
Selecting previously unselected package libgcr-base-3-1:amd64.
Preparing to unpack .../libgcr-base-3-1_3.18.0-1ubuntu1_amd64.deb ...
Unpacking libgcr-base-3-1:amd64 (3.18.0-1ubuntu1) ...
Selecting previously unselected package libgcr-ui-3-1:amd64.
Preparing to unpack .../libgcr-ui-3-1_3.18.0-1ubuntu1_amd64.deb ...
Unpacking libgcr-ui-3-1:amd64 (3.18.0-1ubuntu1) ...
Selecting previously unselected package gcr.
Preparing to unpack .../gcr_3.18.0-1ubuntu1_amd64.deb ...
Unpacking gcr (3.18.0-1ubuntu1) ...
Selecting previously unselected package p11-kit-modules:amd64.
Preparing to unpack .../p11-kit-modules_0.23.2-5~ubuntu16.04.1_amd64.deb ...
Unpacking p11-kit-modules:amd64 (0.23.2-5~ubuntu16.04.1) ...
Selecting previously unselected package p11-kit.
Preparing to unpack .../p11-kit_0.23.2-5~ubuntu16.04.1_amd64.deb ...
Unpacking p11-kit (0.23.2-5~ubuntu16.04.1) ...
Selecting previously unselected package pinentry-gnome3.
Preparing to unpack .../pinentry-gnome3_0.9.7-3_amd64.deb ...
Unpacking pinentry-gnome3 (0.9.7-3) ...
Selecting previously unselected package gnome-keyring.
Preparing to unpack .../gnome-keyring_3.18.3-0ubuntu2_amd64.deb ...
Unpacking gnome-keyring (3.18.3-0ubuntu2) ...
Selecting previously unselected package libgnome-keyring-common.
Preparing to unpack .../libgnome-keyring-common_3.12.0-1build1_all.deb ...
Unpacking libgnome-keyring-common (3.12.0-1build1) ...
Selecting previously unselected package libgnome-keyring0:amd64.
Preparing to unpack .../libgnome-keyring0_3.12.0-1build1_amd64.deb ...
Unpacking libgnome-keyring0:amd64 (3.12.0-1build1) ...
Selecting previously unselected package libp11-kit-gnome-keyring:amd64.
Preparing to unpack .../libp11-kit-gnome-keyring_3.18.3-0ubuntu2_amd64.deb ...
Unpacking libp11-kit-gnome-keyring:amd64 (3.18.3-0ubuntu2) ...
Selecting previously unselected package libpam-gnome-keyring:amd64.
Preparing to unpack .../libpam-gnome-keyring_3.18.3-0ubuntu2_amd64.deb ...
Unpacking libpam-gnome-keyring:amd64 (3.18.3-0ubuntu2) ...
Selecting previously unselected package python-gi.
Preparing to unpack .../python-gi_3.20.0-0ubuntu1_amd64.deb ...
Unpacking python-gi (3.20.0-0ubuntu1) ...
Selecting previously unselected package gir1.2-atk-1.0.
Preparing to unpack .../gir1.2-atk-1.0_2.18.0-1_amd64.deb ...
Unpacking gir1.2-atk-1.0 (2.18.0-1) ...
Selecting previously unselected package gir1.2-freedesktop:amd64.
Preparing to unpack .../gir1.2-freedesktop_1.46.0-3ubuntu1_amd64.deb ...
Unpacking gir1.2-freedesktop:amd64 (1.46.0-3ubuntu1) ...
Selecting previously unselected package gir1.2-gdkpixbuf-2.0:amd64.
Preparing to unpack .../gir1.2-gdkpixbuf-2.0_2.32.2-1ubuntu1.2_amd64.deb ...
Unpacking gir1.2-gdkpixbuf-2.0:amd64 (2.32.2-1ubuntu1.2) ...
Selecting previously unselected package libpangoxft-1.0-0:amd64.
Preparing to unpack .../libpangoxft-1.0-0_1.38.1-1_amd64.deb ...
Unpacking libpangoxft-1.0-0:amd64 (1.38.1-1) ...
Selecting previously unselected package gir1.2-pango-1.0:amd64.
Preparing to unpack .../gir1.2-pango-1.0_1.38.1-1_amd64.deb ...
Unpacking gir1.2-pango-1.0:amd64 (1.38.1-1) ...
Selecting previously unselected package gir1.2-gtk-3.0:amd64.
Preparing to unpack .../gir1.2-gtk-3.0_3.18.9-1ubuntu3.2_amd64.deb ...
Unpacking gir1.2-gtk-3.0:amd64 (3.18.9-1ubuntu3.2) ...
Selecting previously unselected package glade2script.
Preparing to unpack .../glade2script_3.2.3~ppa1_all.deb ...
Unpacking glade2script (3.2.3~ppa1) ...
Selecting previously unselected package boot-sav.
Preparing to unpack .../boot-sav_4ppa40_all.deb ...
Unpacking boot-sav (4ppa40) ...
Selecting previously unselected package boot-repair.
Preparing to unpack .../boot-repair_4ppa40_all.deb ...
Unpacking boot-repair (4ppa40) ...
Selecting previously unselected package boot-sav-extra.
Preparing to unpack .../boot-sav-extra_4ppa40_all.deb ...
Unpacking boot-sav-extra (4ppa40) ...
Selecting previously unselected package libgtop2-common.
Preparing to unpack .../libgtop2-common_2.32.0-1_all.deb ...
Unpacking libgtop2-common (2.32.0-1) ...
Selecting previously unselected package libgtop-2.0-10:amd64.
Preparing to unpack .../libgtop-2.0-10_2.32.0-1_amd64.deb ...
Unpacking libgtop-2.0-10:amd64 (2.32.0-1) ...
Selecting previously unselected package libgksu2-0.
Preparing to unpack .../libgksu2-0_2.0.13~pre1-6ubuntu8_amd64.deb ...
Unpacking libgksu2-0 (2.0.13~pre1-6ubuntu8) ...
Selecting previously unselected package gksu.
Preparing to unpack .../gksu_2.0.2-9ubuntu1_amd64.deb ...
Unpacking gksu (2.0.2-9ubuntu1) ...
Selecting previously unselected package pastebinit.
Preparing to unpack .../pastebinit_1.5-1_all.deb ...
Unpacking pastebinit (1.5-1) ...
Selecting previously unselected package syslinux-common.
Preparing to unpack .../syslinux-common_3%3a6.03+dfsg-11ubuntu1_all.deb ...
Unpacking syslinux-common (3:6.03+dfsg-11ubuntu1) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for libc-bin (2.23-0ubuntu5) ...
Processing triggers for hicolor-icon-theme (0.15-0ubuntu1) ...
Processing triggers for shared-mime-info (1.5-2ubuntu0.1) ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Processing triggers for gconf2 (3.2.6-3ubuntu6) ...
Processing triggers for libglib2.0-0:amd64 (2.48.2-0ubuntu1) ...
Processing triggers for mime-support (3.59ubuntu1) ...
Setting up gawk (1:4.1.3+dfsg-0.1) ...
Setting up libgck-1-0:amd64 (3.18.0-1ubuntu1) ...
Setting up libgcr-3-common (3.18.0-1ubuntu1) ...
Setting up libgcr-base-3-1:amd64 (3.18.0-1ubuntu1) ...
Setting up libgcr-ui-3-1:amd64 (3.18.0-1ubuntu1) ...
Setting up gcr (3.18.0-1ubuntu1) ...
Setting up p11-kit-modules:amd64 (0.23.2-5~ubuntu16.04.1) ...
Setting up p11-kit (0.23.2-5~ubuntu16.04.1) ...
Setting up pinentry-gnome3 (0.9.7-3) ...
Setting up gnome-keyring (3.18.3-0ubuntu2) ...
Setting up libgnome-keyring-common (3.12.0-1build1) ...
Setting up libgnome-keyring0:amd64 (3.12.0-1build1) ...
Setting up libp11-kit-gnome-keyring:amd64 (3.18.3-0ubuntu2) ...
Setting up libpam-gnome-keyring:amd64 (3.18.3-0ubuntu2) ...
Setting up python-gi (3.20.0-0ubuntu1) ...
Setting up gir1.2-atk-1.0 (2.18.0-1) ...
Setting up gir1.2-freedesktop:amd64 (1.46.0-3ubuntu1) ...
Setting up gir1.2-gdkpixbuf-2.0:amd64 (2.32.2-1ubuntu1.2) ...
Setting up libpangoxft-1.0-0:amd64 (1.38.1-1) ...
Setting up gir1.2-pango-1.0:amd64 (1.38.1-1) ...
Setting up gir1.2-gtk-3.0:amd64 (3.18.9-1ubuntu3.2) ...
Setting up glade2script (3.2.3~ppa1) ...
Setting up boot-sav (4ppa40) ...
Setting up boot-repair (4ppa40) ...
Setting up boot-sav-extra (4ppa40) ...
Setting up libgtop2-common (2.32.0-1) ...
Setting up libgtop-2.0-10:amd64 (2.32.0-1) ...
Setting up libgksu2-0 (2.0.13~pre1-6ubuntu8) ...
update-alternatives: using /usr/share/libgksu/debian/gconf-defaults.libgksu-sudo to provide /usr/share/gconf/defaults/10_libgksu (libgksu-gconf-defaults) in auto mode
Setting up pastebinit (1.5-1) ...
Setting up syslinux-common (3:6.03+dfsg-11ubuntu1) ...
Processing triggers for gconf2 (3.2.6-3ubuntu6) ...
Setting up gksu (2.0.2-9ubuntu1) ...
Processing triggers for libc-bin (2.23-0ubuntu5) ...
kubuntu@kubuntu:~$ boot-repair
kubuntu@kubuntu:~$ /usr/bin/glade2script:49: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk
BootInfo : http://paste2.org/b41gZwzK
...
je lance le "Recommended repair" . . .
->
Boot successfully repaired.
Please write on a paper the following URL:
http://paste2.org/PgAKeKtyIn case you still experience boot problem, indicate this URL to:
boot.repair@gmail.com or to your favorite support forum.You can now reboot your computer.
Please do not forget to make your BIOS boot on sdb (512GB) disk!If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi
... et je vais tenter de rebooter (après avoir remis le mode de boot en UEFI)
Dernière modification par adrenalinos (Le 17/03/2017, à 19:00)
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#15 Le 17/03/2017, à 19:13
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
Wouah! .. j'ai récupéré mon Grub et je suis dans mon environnement!
déjà super MERCI donc!
MAIS, hélas, tout n'est pas encore rose:
je n'ai pas accès à mes partitions data:
Le système a répondu :The requested operation has failed: Error mounting /dev/sdb8 at /media/adrenalinos/DATA1: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000" "/dev/sdb8" "/media/adrenalinos/DATA1"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sdb8': Opération non permise
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option.Le système a répondu :The requested operation has failed: Error mounting /dev/sda4 at /media/adrenalinos/DATA2: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000" "/dev/sda4" "/media/adrenalinos/DATA2"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sda4': Opération non permise
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option.Le système a répondu :The requested operation has failed: Error mounting /dev/sdb5 at /media/adrenalinos/OS: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000" "/dev/sdb5" "/media/adrenalinos/OS"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sdb5': Opération non permise
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option.
...
Oups donc!... encore un petit conseil svp?
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#16 Le 17/03/2017, à 19:16
- Laurent85
Re : Pb BOOT apres coupure de courant [résolu]
Bonne nouvelle. Redémarre Windows et lance une vérification des partitions ntfs, bon je n'y connais rien en Windows il y aura quelqu'un pour préciser si nécessaire.
Hors ligne
#17 Le 17/03/2017, à 19:28
- adrenalinos
Re : Pb BOOT apres coupure de courant [résolu]
j'ai utilisé "sudo ntfsfix <partition>" en ligne de commande
adrenalinos@adrenalinos-Alienware-17-R2:~$ sudo ntfsfix /dev/sdb8
[sudo] Mot de passe de adrenalinos :
Mounting volume... The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
Checking the alternate boot sector... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb8 was processed successfully.
adrenalinos@adrenalinos-Alienware-17-R2:~$ sudo ntfsfix /dev/sda4
Mounting volume... The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
Checking the alternate boot sector... OK
NTFS volume version is 3.1.
NTFS partition /dev/sda4 was processed successfully.
adrenalinos@adrenalinos-Alienware-17-R2:~$ sudo ntfsfix /dev/sdb5
Mounting volume... The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
Checking the alternate boot sector... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb5 was processed successfully.
et c'est Tout Bon!
super Super Merci ! * * * *
Alienware17 i7-4980HQ 16Go DDRL3 1,6GHz NVIDIA GeForce GTX 980M 4 Go GDDR5 - SSD de 256 Go + disque dur de 2 To à 5 400 tr/min Kubuntu22.04
HP OfficeJet 7740
Hors ligne
#18 Le 17/03/2017, à 20:21
- Bougron
Re : Pb BOOT apres coupure de courant [résolu]
Bonsoir
Je tiens à te dire que tu as eu énormément de chances. Tu as eu une coupure de courant. Par chance, ubuntu n'était pas en train d'écrire dans une partition NTFS. Si cela avait été le cas, il aurait absolument fallu que tu lances windows et executer la réparation de la partition avec la commande windows
chkdsk /r LETTRE:
Je t'engage d'ailleurs à le faire pour ta partition windows (sdb5) et d'en profiter pour déactiver l'hibernation ainsi que pour ta partition DATA (sdb8)
et de te pencher sérieusement sur ce problème
(en mode UEFI ça boote Windows, dont je ne connais plus le mot de passe! [je n'ai plus jamais utilisé ce windows!].
Soit tu fais fonctionner windows.
Soit tu supprimes la totalité des partitions NTFS.
Dernière modification par Bougron (Le 17/03/2017, à 20:22)
Hors ligne