Pages : 1
#1 Le 13/06/2007, à 20:49
- totoroavi
Xorg.conf se réécris tout seul ?
Bonjour, voila je trouve des "choses" blizzards, bon dans mon cas par exemples ...
voila mon xorg.conf avant la bizzarerie :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV20 [GeForce3 Ti 200]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 30-81
VertRefresh 56-75
modeline "1440x900@75" 136.49 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV20 [GeForce3 Ti 200]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionet aprés :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Nov 9 17:55:20 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "vbe"
load "glx"
load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
option "CoreKeyboard"
option "XkbRules" "xorg"
option "XkbModel" "pc105"
option "XkbLayout" "fr"
option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
option "CorePointer"
option "Device" "/dev/input/mice"
option "Protocol" "ImPS/2"
option "ZAxisMapping" "4 5"
option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
option "Device" "/dev/input/wacom"
option "Type" "stylus"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
option "Device" "/dev/input/wacom"
option "Type" "eraser"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
option "Device" "/dev/input/wacom"
option "Type" "cursor"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
identifier "SAMSUNG LCD"
modelname "Custom 1"
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1280x768@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
modeline "1280x720@60" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
modeline "1280x800@75" 107.21 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
modeline "1280x768@75" 102.98 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
modeline "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
modeline "1440x900@75" 136.49 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
modeline "1440x900@60" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
modeline "1600x1024@60" 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
modeline "1680x1050@60" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
modeline "1920x1200@60" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
gamma 1.0
EndSection
Section "Device"
identifier "nVidia Corporation NV20 [GeForce3 Ti 200]"
boardname "nv"
busid "PCI:1:0:0"
driver "nvidia"
screen 0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV20 [GeForce3 Ti 200]"
Monitor "SAMSUNG LCD"
DefaultDepth 24
SubSection "Display"
depth 24
virtual 1920 1200
modes "1440x900@60" "1600x1024@60" "1440x900@75" "1680x1050@60" "1280x800@60" "1920x1200@60" "1280x768@75" "1280x800@75" "1280x720@60" "1280x768@60" "800x600@60" "800x600@75" "800x600@72" "800x600@56"
EndSubSection
EndSection
Section "ServerFlags"
EndSectionEntre les 2 justes un redémarrage de X ou de la machine (en faite je sais pas car j'avais pas fait attention)
Alors je me suis rendu compte de cela en essayant d'aider ma copine avec sa kubuntu qui a des problèmes des résolutions ou là le xorg.conf était :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd@rothera) Thu Jan 5 15:32:31 UTC 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nv"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSectionet est devenu :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "vbe"
load "glx"
load "GLcore"
load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
option "CoreKeyboard"
option "XkbRules" "xorg"
option "XkbModel" "pc105"
option "XkbLayout" "fr"
option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
option "CorePointer"
option "Device" "/dev/input/mice"
option "Protocol" "ImPS/2"
option "ZAxisMapping" "4 5"
option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
option "Device" "/dev/input/wacom"
option "Type" "stylus"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
option "Device" "/dev/input/wacom"
option "Type" "eraser"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
option "Device" "/dev/input/wacom"
option "Type" "cursor"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
identifier "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
boardname "nv"
busid "PCI:1:0:0"
driver "nv"
screen 0
EndSection
Section "Monitor"
identifier "SyncMaster"
vendorname "Plug 'n' Play"
modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
depth 24
virtual 640 480
modes "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "device" #
identifier "device1"
boardname "nv"
busid "PCI:1:0:0"
driver "nv"
screen 1
EndSection
Section "screen" #
identifier "screen1"
device "device1"
defaultdepth 24
monitor "monitor1"
EndSection
Section "monitor" #
identifier "monitor1"
gamma 1.0
EndSection
Section "ServerFlags"
EndSectionLa aussi un reboot entre les 2 ... :s
Donc voila si vous avez remarquez comme moi des différence de structure du fichier ... et si vous savez le pourquoi ... je suis preneur
Est ce qu'au démarrage du PC certain scrip modifie le xorg.conf ? Est-ce que KDE, peux modifier un xorg.conf sans nous le demander ? De plus comment ce fait t'il qu'on voit t'en de différence entre le xorg.conf et les résolutions proposer par KDE ?
(Que de question je sais ... mais bon ...)
Pour moi en théorie, mis a par en lancent un reconfiguration de Xorg a la main, ou en modifient le xorg.conf a la main ce fichier ne devrait logiquement pas bouger non ? je me trompe ?
Merci de vos réponses 
totoro
Dernière modification par totoroavi (Le 14/06/2007, à 08:29)
"Le monde est dangereux non pas à cause de ceux qui font le mal, mais à cause de ceux qui regardent et laissent faire"
(Albert Einstein)
Hors ligne
#2 Le 14/06/2007, à 20:08
- totoroavi
Re : Xorg.conf se réécris tout seul ?
up
"Le monde est dangereux non pas à cause de ceux qui font le mal, mais à cause de ceux qui regardent et laissent faire"
(Albert Einstein)
Hors ligne
#3 Le 15/06/2007, à 08:46
- niconux
Re : Xorg.conf se réécris tout seul ?
Est ce qu'au démarrage du PC certain scrip modifie le xorg.conf ? Est-ce que KDE, peux modifier un xorg.conf sans nous le demander ? De plus comment ce fait t'il qu'on voit t'en de différence entre le xorg.conf et les résolutions proposer par KDE ?
Alors pour répondre à quelques une de tes questions :
Non : KDE ne peux pas modifier un xorg.conf comme bon lui semble, il faudra saisir dans tout les cas le mot de passe du compte "root" (vi sudo ou autre)
Oui : Certains scripts peuvent modifier le xorg.conf, mais je ne pourrais pas te donner une liste exhaustive.
Après pour les différences, entre deux états du xorg.conf, un début d'explication peu être donner par les commentaires en entête de fichier :
Un coup on voit :
(second fichier)
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Nov 9 17:55:20 PST 2006
et une autre fois non ...
Est ce qu'entre les deux tu n'aurais pas installer les drivers nvidia ou fait une mise à jour de tes drivers ? (petite remarque dans le deuxième exemple, le config de ta copine visiblement, le driver utiliser est "nv" normal ? un choix délibéré de ne pas utiliser "nvidia" comme dans le premier cas ?)
Bref, dans le doute, tu peux repartir de zéro si je peux dire en faisant un reconfiguration du serveur X (dpkg ...) et voir ce qui se passe.
Hors ligne
#4 Le 15/06/2007, à 08:57
- totoroavi
Re : Xorg.conf se réécris tout seul ?
Merci de ta réponse
Alors le chois de "nv" est du que quand je mes "nvidia" la résolution tombe en 640x480.
Entre les 2 il n'y a pas eu de mise à jours.
le "sudo dpkg-reconfigure xserver-xorg" semble avoir résolut le problème, mais toujours en drivers "nv".
@+ Totoro
PS: Salut Nico
"Le monde est dangereux non pas à cause de ceux qui font le mal, mais à cause de ceux qui regardent et laissent faire"
(Albert Einstein)
Hors ligne