Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 06/06/2007, à 10:36

hi

Ati x300 serie

Bonjour smile

j'ai Kubuntu feisty, et je sais pas du tous quel pilote j'ai fgrlx, propietaire, glx etc...

j'ai rien installer et beryl marche, par contre j'ai quelque plantage parfois, c'est pour sa que j'aimerais bien savoir si cela proviens de ma carte, des pilotes etc...

mon xorg.conf suivi de mon source.list ont sais jamais merci

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/fonts/X11/misc"
  FontPath "/usr/share/fonts/X11/cyrillic"
  FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/Type1"
  FontPath "/usr/share/fonts/X11/100dpi"
  FontPath "/usr/share/fonts/X11/75dpi"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "vbe"
  load "glx"
  load "GLcore"
  load "dri"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "fr"
  option "XkbVariant" "oss"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ImPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/input/wacom"
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/input/wacom"
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/input/wacom"
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
  identifier "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
  boardname "ATI Radeon"
  busid "PCI:4:0:0"
  driver "ati"
  screen 0
  vendorname "ATI"
  option "MergedFB" "off"
EndSection

Section "Monitor"
  identifier "Écran générique"
  vendorname "Generic"
  modelname "1280x1024 @ 76 Hz"
  HorizSync 31.5-82
  VertRefresh 50-90
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
  Monitor "Écran générique"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    virtual 1600 1200
    modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x1024@60" "1024x768@43" "1280x960@75" "1024x768@60" "1400x1050@60" "1024x768@70" "1400x1050@75" "1024x768@75" "1600x1200@65" "1024x768@85" "1600x1200@60" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "device" #    
  identifier "device1"
  boardname "ATI Radeon"
  busid "PCI:4:0:1"
  driver "ati"
  screen 0
  vendorname "ATI"
  option "MergedFB" "off"
EndSection
Section "screen" #    
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "640x480@60" "640x480@72" "640x480@75" "640x480@85" "800x600@56" "800x600@72" "800x600@75" "800x600@85" "800x600@60" "832x624@75" "1024x768@85" "1024x768@75" "1024x768@70" "1024x768@60" "1024x768@43" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1400x1050@75" "1600x1200@65" "1600x1200@60"
  EndSubSection
EndSection
Section "monitor" #    
  identifier "monitor1"
  vendorname "Generic"
  modelname "1280x1024 @ 76 Hz"
  HorizSync 31.5-82
  VertRefresh 50-90
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection
## DÉPÔTS OFFICIELS
deb http://fr.archive.ubuntu.com/ubuntu/ feisty main restricted universe multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ feisty-security main restricted universe multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ feisty-updates main restricted universe multiverse
#deb http://fr.archive.ubuntu.com/ubuntu/ feisty-backports main restricted universe multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ feisty-proposed main restricted universe multiverse

## Commercial
deb http://archive.canonical.com/ feisty-commercial main

## MEDIBUNTU
deb http://medibuntu.sos-sts.com/repo/ feisty free non-free


# kubuntu.org packages for the latest KDE version
deb http://kubuntu.org/packages/kde-357 feisty main

#Beryl
deb http://ubuntu.beryl-project.org feisty main

Voila merci smile

#2 Le 06/06/2007, à 10:51

vincentced

Re : Ati x300 serie

Salut,

Une remarque, tu parles de ta carte graphique mais tu pourrais détailler les informations comme ATI Radon 9600 XT serait suffisant. La raison est que pour les cartes ati, le pilote libre peut être suffisant ou non en fonction des cartes.

La réponse à ta question
Regarde bien les lignes suivantes de ton xorg.conf

Section "Device"
  identifier "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
  boardname "ATI Radeon"
  busid "PCI:4:0:0"
  driver "ati"
  screen 0
  vendorname "ATI"
  option "MergedFB" "off"
EndSection

On voit une ligne driver correspondant au driver utilisé pour ta carte graphique.
Le pilote est ati.

Donc, tu n'as pas installé les pilotes propriétaires de ATI qui est fgrlx.

Est-ce que le pilote ati est suffisant?
Il semblerait que oui vu que Beryl marche.

Détail
Dans une console, tu peux vérifier en tapant:

glxinfo | grep rendering

Si la réponse est Yes, c'est bon, la 3D est activé.

Essaye aussi un jeu 3D comme ppracer (Penguin Planet Racer). Si ce jeu est fluide, c'est parfait.

#3 Le 06/06/2007, à 10:53

vincentced

Re : Ati x300 serie

Désolé pour la remarque,:(

Je viens de voir que ta carte est le titre du sujet:rolleyes:

carte ATI X300 SERIE

Pages : 1