Ubuntu-fr

Nishiki

Problémes X1300

Bonjour,
J'ai une Ati X1300 256mo, et je voulais avoir l'accélération 3D, pour cela j'ai suivit ce tuto: http://doc.ubuntu-fr.org/materiel/ati_proprietaire

Donc tout se passe bien, jusqu'au moment ou je modifie le fichier xorg.conf, quand je redémarre mon PC j'ai un message d'erreur, et je suis obligé de passer en ligne de commande pour faire un backup

Voilà mon fichier xorg.conf après modification ( et qui plante ):

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"dri"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RC410 [Radeon Xpress 1300pro]"
	Driver		"fglrx"
        Option          "VideoOverlay" "on"
        Option          "OpenGLOverlay" "off"
	Busid		"PCI:1:5:0"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	Horizsync	28-51
	Vertrefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Carte vidéo générique"
	Monitor		"Écran générique"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1024x768"	"800x600"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
        Option "AIGLX" "false"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection
Section "Extensions"
	Option		"Composite"	"disable"
EndSection

Si on pouvait m'aider à faire marcher l'accélération graphique, ça serait sympa.

Merci de vos futures réponse.

Dernière modification par Nishiki (Le 04/06/2007, à 10:11)

rorist

Re : Problémes X1300

je suis debutant, mais il semble que dans la Section "Device", ton idendifier soit pas adapté, essaie de remplacer:

Section "Device"
    Identifier    "ATI Technologies Inc RC410 [Radeon Xpress 1300pro]"

par

Section "Device"
    Identifier    "Carte vidéo générique"

---

Kubuntu 7.10 / Debian SID / amd64+1600xtsilent+mxrevolution+ultrax flat keyboard

Nishiki

Re : Problémes X1300

Désolé j'ai testé toujours le même message d'erreur

benhur38

Re : Problémes X1300

Salut,

je ne sais pas si tu as résolu ton problème.
Il me semble effectivement que les identifiants de Device dans les 2 sections suivantes:

Section "Device"
    Identifier    "ATI Technologies Inc RC410 [Radeon Xpress 1300pro]"

et

Section "Screen"
    Identifier    "Default Screen"
    Device        "Carte vidéo générique"

doivent être les mêmes.

De plus, dans mon xorg.conf, j'ai

Section "ServerLayout"
    Identifier    "Default Layout"
        Option "AIGLX" "false"
    screen "Default Screen" 0 0
    Inputdevice    "Generic Keyboard"
    Inputdevice    "Configured Mouse"
    Inputdevice    "stylus"    "SendCoreEvents"
    Inputdevice    "cursor"    "SendCoreEvents"
    Inputdevice    "eraser"    "SendCoreEvents"
EndSection

Rajoute donc les "0 0" après

screen "Default Screen"

pour voir si ça change quelque chose.

A plus

Ben