#1 Le 30/04/2007, à 12:30
- benichoukkke
probleme direct rendering:no ati radeon 9200 SE
Bonjour a tous 
Après être passe à feisty l'autre jour, premier demarrage severX plante ok... je reconfigue xorg.conf et ca roule mais voila.... je me suis rendu compte en tapant glxinfo que la valeur de direct rendering était a "no"....je me suis alors un petit peu documente... j'ai installe les drivers libres comme indique ds la doc de ubuntu... rien n'y fait.... j'ai remis l'ancien libGL.so.1.2 ds /usr/lib/... ca marche tjs pas....
voici mon fichier xorg.conf :
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV280 [Radeon 9200 SE]"
Driver "radeon"
Option "AGPMode" "4"
Option "AGPSize" "64" # default: 8
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "true"
Option "EnableDepthMoves" "true"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "PULSAR"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV280 [Radeon 9200 SE]"
Monitor "PULSAR"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSectionainsi les (WW) du fichier log :
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32voila j'espère qu'il ne vous manque pas d'infos
d'avance merci
Ben
Dernière modification par benichoukkke (Le 30/04/2007, à 13:33)
Hors ligne
#2 Le 02/05/2007, à 19:09
- benichoukkke
Re : probleme direct rendering:no ati radeon 9200 SE
pas d'idée ? 
Hors ligne
#3 Le 02/05/2007, à 19:37
- alexisj
Re : probleme direct rendering:no ati radeon 9200 SE
Chez moi ca marche... (ati radeon 9200 avec driver libre radeon)
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV280 [Radeon 9200 PRO]"
Driver "radeon"
BusID "PCI:1:0:0"
# Option "XAANoOffscreenPixmaps" # Faster RENDER acceleration ###
# VideoRam 131072 # 128 MB VRAM ###
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture #
Option "AccelDFS" "0" # pour ATI 9250
Option "AGPMode" "8" # AGP- 8 fonctionne mois bien
Option "AGPSize" "128" # AGP aperture size - 128 fonctionne moins bien
Option "GARTSize" "64" # TEST
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
Option "ColorTiling" "1"
Option "EnableDepthMoves" "yes"
Option "UseFBDev" "false"
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "mtrr" "on"
Option "SubPixelOrder" "none"
Option "DynamicClocks" "on"
# Option "BackingStore" "true" # Faster double buffering ###
Option "DPMS"
Option "DRI" "true"
EndSection
Section "Monitor"
Identifier "AL1715"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV280 [Radeon 9200 PRO]"
Monitor "AL1715"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
Option "AddARGBGLXVisuals" "True"
Option "DisableGLXRootClipping" "True"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
option "offtime" "30"
Option "AIGLX" "true" # Nécessaire pour beryl
EndSectionHors ligne