Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 21/04/2007, à 23:35

yobabeth

résolution Ati X600 sous feisty comment changer

bonjour

mon Xorg


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc M24 1P [Radeon Mobility X600]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc M24 1P [Radeon Mobility X600]"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

quand je vais dans Systeme  / Preferences/ resolution de l'écran
je veux mettre 1280x1024  l'image n'est plus stable illisible j'avais mis le driver Ati mais ça ne change pas
alors je l'ai désinstallé je sais que je peux le changer dans le fichier Xorg mais comme je débute je préfère l'avis d'un spécialiste
merci

On traverse la vie comme des éléphants dans un magasin de porcelaine,une ébréchure par ici,une fêlure par là. @//(*_*)\\@ http://www.deezer.com/fr/user/yobabeth
ati radeon HD 2600

Hors ligne

#2 Le 22/04/2007, à 14:47

yobabeth

Re : résolution Ati X600 sous feisty comment changer

un p'tit UP   smile

On traverse la vie comme des éléphants dans un magasin de porcelaine,une ébréchure par ici,une fêlure par là. @//(*_*)\\@ http://www.deezer.com/fr/user/yobabeth
ati radeon HD 2600

Hors ligne

#3 Le 24/04/2007, à 21:14

lolo21

Re : résolution Ati X600 sous feisty comment changer

Salut,  j'ai la même carte que toi, voiçi mon xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    Fontpath    "/usr/share/fonts/X11/misc"
    Fontpath    "/usr/share/fonts/X11/cyrillic"
    Fontpath    "/usr/share/fonts/X11/100dpi/:unscaled"
    Fontpath    "/usr/share/fonts/X11/75dpi/:unscaled"
    Fontpath    "/usr/share/fonts/X11/Type1"
    Fontpath    "/usr/share/fonts/X11/100dpi"
    Fontpath    "/usr/share/fonts/X11/75dpi"
    # path to defoma fonts
    Fontpath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection


Section "Module"
    Load        "i2c"
    Load        "bitmap"
    Load        "ddc"
    Load        "dri"
    Load        "extmod"
    Load        "freetype"
    Load        "glx"
    Load        "int10"
    Load        "type1"
    Load        "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr"
    Option        "XkbVariant"    "oss"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"    "/dev/input/mice"
    Option        "Protocol"    "ImPS/2"
    Option        "ZAxisMapping"    "4 5"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "stylus"
    Option        "Device"    "/dev/input/wacom"
    Option        "Type"    "stylus"
    Option        "ForceDevice"    "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "eraser"
    Option        "Device"    "/dev/input/wacom"
    Option        "Type"    "eraser"
    Option        "ForceDevice"    "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "cursor"
    Option        "Device"    "/dev/input/wacom"
    Option        "Type"    "cursor"
    Option        "ForceDevice"    "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
    Identifier    "ATI Technologies Inc RV380 0x3e50 [Radeon X600]"
    Driver        "fglrx"
    Busid        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "Philips 170C"
    Option        "DPMS"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies Inc RV380 0x3e50 [Radeon X600]"
    Monitor        "Philips 170C"
    Defaultdepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
  screen "Default Screen"
    Inputdevice    "Generic Keyboard"
    Inputdevice    "Configured Mouse"
    Inputdevice    "stylus"    "SendCoreEvents"
    Inputdevice    "cursor"    "SendCoreEvents"
    Inputdevice    "eraser"    "SendCoreEvents"
EndSection

Section "DRI"
    Mode    0666
EndSection
Section "Extensions"
    Option        "Composite"    "0"
EndSection

j'explique comment j'ai réussi à augmenter la résolution sur ce forum http://forum.ubuntu-fr.org/viewtopic.php?id=112995
parceque le problème vient pas de la carte graphique mais du moniteur qui n'est pas reconnu

j'espère que cela peut t'aider
A+

Pages : 1