Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 21/04/2007, à 13:26

mobility

[Abandonné] Beryl ne se lance plus après upgrade vers Feisty

Bonjour à tous,

Je viens de faire un upgradre Dapper => Feisty via Synaptic  sans aucun problème apparemment sauf que lorsque je souhaite lancer Beryl (Alt+F2 beryl-manager), je rebascule vers l'ouverture de session. 

Après avoir tapé mon nom d'utilisateur et password, Beryl n'est pas lancé.

Pour info, sous Dapper j'avais réussit a faire fonctionner Beryl parfaitement sur cet Acer 3020.

Merci pour votre aide. Ci-joint mon xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon Mobility X700 (RV410 PCIE)"
	Driver		"radeon"
	BusID		"PCI:1:0:0"
	Option		"MonitorLayout" "LVDS,NONE"
	Option		"DRI" "true"
	Option		"ColorTiling" "on" 
	Option		"EnablePageFlip" "true"
	Option		"AccelMethod" "EXA"
	Option		"XAANoOffscreenPixmap"
	Option		"RenderAccel" "true"
	Option		"AGPFastWrite" "on"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon Mobility X700 (RV410 PCIE)"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x800" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

Dernière modification par mobility (Le 05/05/2007, à 12:57)

Hors ligne

#2 Le 21/04/2007, à 19:23

doudoufr

Re : [Abandonné] Beryl ne se lance plus après upgrade vers Feisty

Hi

as tu réessayé de réinstaller beryl ? moi c'est la 1ere chose que j'ferais. Les versions de beryl j'crois ne sont pas les même de dapper a feisty.
Et étant donné que beryl est assez instable, je le réinstallerais complètement.
(d'ailleurs, moi sous dapper, j'avais du le configurer le beryl avec des lignes de commandes et tout l'tutti, alors que sous feisty, quedal, juste 4/5 paquets à installer et une "beryl-manager" a rajouter en démarrage pour que ca roule ma poule !)
J'dis ca, mais j'suis qu'un débutant hein...donc c'est peut être pas ça qu'il faut faire ! lol !

Hors ligne

#3 Le 21/04/2007, à 19:56

mobility

Re : [Abandonné] Beryl ne se lance plus après upgrade vers Feisty

Merci pour ta réponse, mais j'ai commencé par là et cela n'a rien changé. Quelqu'un a une autre idée ?

Hors ligne

#4 Le 22/04/2007, à 08:55

thibaultg

Re : [Abandonné] Beryl ne se lance plus après upgrade vers Feisty

Tu n'as pa de message d'erreur,
tape glxinfo | grep "direct rendering"
puis    beryl  --test-only

Hors ligne

#5 Le 22/04/2007, à 10:29

mobility

Re : [Abandonné] Beryl ne se lance plus après upgrade vers Feisty

glxinfo | grep "direct rendering" reponse : YES,

Puis beryl  --test-only renvoie :

**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Checking for non power of two texture support   : passed
Checking maximum texture size                   : passed (2048x2048)

Ca t'inspire quelque chose ?

Merci !

Hors ligne

#6 Le 22/04/2007, à 14:38

mobility

Re : [Abandonné] Beryl ne se lance plus après upgrade vers Feisty

Je viens d'essayer en installant les pilotes ATI via le gestionnaire de pilotes propriétaires, puis en réinstallant complétement Beryl :

Maintenant lorsque je lance beryl-manager, j'ai bien le l'icone du Gestionnaire Beryl qui apparait, mais je n'ai aucun effet (bureau en cube par exemple est pourtant bien sélectionné)

Voici mon xorg.conf après installation des pilotes propriétaires :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/X11/fonts/misc"
	Fontpath	"/usr/share/X11/fonts/cyrillic"
	Fontpath	"/usr/share/X11/fonts/100dpi/:unscaled"
	Fontpath	"/usr/share/X11/fonts/75dpi/:unscaled"
	Fontpath	"/usr/share/X11/fonts/Type1"
	Fontpath	"/usr/share/X11/fonts/100dpi"
	Fontpath	"/usr/share/X11/fonts/75dpi"
	Fontpath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"dri"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"type1"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ExplorerPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"	"/dev/psaux"
	Option		"Protocol"	"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon Mobility X700 (RV410 PCIE)"
	Driver		"fglrx"
	Busid		"PCI:1:0:0"
	Option		"MonitorLayout"	"LVDS,NONE"
	Option		"DRI"	"true"
	Option		"ColorTiling"	"on"
	Option		"EnablePageFlip"	"true"
	Option		"AccelMethod"	"EXA"
	Option		"XAANoOffscreenPixmap"
	Option		"RenderAccel"	"true"
	Option		"AGPFastWrite"	"on"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon Mobility X700 (RV410 PCIE)"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x800"	"1024x768"	"800x600"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
	Inputdevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection
Section "Extensions"
	Option		"Composite"	"0"
EndSection

Hors ligne

#7 Le 01/05/2007, à 09:26

mobility

Re : [Abandonné] Beryl ne se lance plus après upgrade vers Feisty

Up ! Je sèche toujours et malgrès plusieurs essais, je suis toujours au même point : Le Gestionnaire Beryl se lance et j'y ai accès, mais je n'ai aucun effet 3D...

Hors ligne

Pages : 1