#1 Le 10/04/2007, à 16:51
- NiRaDo
Beryl : checking maximum texture size
Bonjour.
Je tente d'installer Beryl sur le portable de mes parents pour leur montrer les capacités de ce serveur graphique.
Par contre j'ai un petit message d'erreur :
dorian@dell:~$ beryl-manager
dorian@dell:~$ libGL warning: 3D driver claims to not support visual 0x4b
**************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : AIGLX
Checking Display :0.0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
Checking Screen 0 ...
libGL warning: 3D driver claims to not support visual 0x4b
Checking for GLX_SGIX_fbconfig : passed
Checking for GLX_EXT_texture_from_pixmap : passed
Checking for non power of two texture support : passed
Checking maximum texture size : failed
Root window size (1400/1050) is bigger then maximum texture size (1024x1024)
X Error of failed request: GLXBadContext
Major opcode of failed request: 143 (GLX)
Minor opcode of failed request: 4 (X_GLXDestroyContext)
Serial number of failed request: 38
Current serial number in output stream: 40Les tests se passent bien si ce n'est le Checking maximum texture size. Comme pourrais-je régler le problème ?
Merci d'avance.
ps : ma version est Ubuntu 6.10
Hors ligne
#2 Le 10/04/2007, à 17:06
- inbox
Re : Beryl : checking maximum texture size
Salut,
Il faudrait que tu colles le contenu de
sudo gedit /etc/X11/xorg.confQuel est le modèle de ta carte vidéo (lspci) ?
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#3 Le 10/04/2007, à 17:46
- NiRaDo
Re : Beryl : checking maximum texture size
Salut.
Voici ce que me renvoi lspci :
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LYEt le fichier xorg :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility M6 LY [Radeon Mobility 9000]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon Mobility M6 LY [Radeon Mobility 9000]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSectionHors ligne
#4 Le 10/04/2007, à 22:02
- inbox
Re : Beryl : checking maximum texture size
Salut,
Je ne sais pas ce que tu as suivi comme procédure d'installation, mais jettes un oeil ici http://doc.ubuntu-fr.org/radeon pour la 3D.
Si tu veux vérifier que ton portable est compatible (ou non), cherches ici
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne