Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#1 Le 05/04/2007, à 14:55

wholehog2

plantage serveurx aprés instal driver ati

bonjour,

je suis sous kubuntu edgy eft et j'essai désespérémnet d'installer les drivers ati (8.35.5) pour ma carte graphique radéon 9700 pro mais ça ne fonctionne pas !

installation des drivers ->OK  redémarrage et au momement ou je devrais voir apparaitre le pointeur de la souris l'écran reste noir et le pc est bolqué.
je redémarre en "mode sans echec" , je regarde le fichier Xorg.0.log -> pas d'erreur sgnificative.
Je commente les lignes suivantes dans le fichier xorg.conf

#Section "Extensions"
#	Option	    "Composite" "disable"
#EndSection

Je redémarrage, et le pc démarre. Je n'ai pas la 3D mais il boot.

j'ai essayé plein de méthodes pour l'installation des drivers (automatique, manuel, envy) mais aucune ne fonctionne.

Aidez moi s'il vous plait.
Je découvre linux et n'y connait pas grand chose !

Hors ligne

#2 Le 07/04/2007, à 14:43

wholehog2

Re : plantage serveurx aprés instal driver ati

personne pour m'aider ?

Hors ligne

#3 Le 07/04/2007, à 14:50

benefice

Re : plantage serveurx aprés instal driver ati

Salut, c' est quoi ton écran ?

Et est-ce que quand ton ordi ne démarre pas sur l' interface graphique, tu as quand mème la possibilité de taper quelque chose comme sur un terminal ?

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#4 Le 07/04/2007, à 15:45

wholehog2

Re : plantage serveurx aprés instal driver ati

malheureusement non je ne peux rien taper

en fait c'est au moment ou le curseur de la souris doit s'afficher que l'écran reste noir et le disque dur gratte quelques secondes et le pc se bloque

j'ai essayé de faire ctrl+alt+f1 avant que ça plante mais pas de console !
est ce qu'il y a un fichier log ou je pourrais voir l'erruer qui se produit ? a part le fichier xorg.0.log où il n'y a pas d'erreur significtive.

merci de m'aider.

Hors ligne

#5 Le 07/04/2007, à 16:16

benefice

Re : plantage serveurx aprés instal driver ati

Bin déjà Xorg.0.log sa doit bien te renseigner, si tu veux copie le sur le forum je regarderais.

Sinon qu' est que tu as comme écran ? car sa vient défois de là

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#6 Le 07/04/2007, à 16:23

wholehog2

Re : plantage serveurx aprés instal driver ati

voici donc le fichier (un peu long) xorg.0.log

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686 
Current Operating System: Linux Kubuntu 2.6.17-11-generic #2 SMP Thu Feb 1 19:52:28 UTC 2007 i686
Build Date: 07 July 2006
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr  5 15:08:44 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Vivitron 17"
(**) |   |-->Device "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(**) FontPath set to:
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/misc/,
	/usr/share/fonts/X11/TTF/,
	/usr/share/fonts/X11/OTF,
	/usr/share/fonts/X11/Type1/,
	/usr/share/fonts/X11/CID/,
	/usr/share/fonts/X11/100dpi/,
	/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "off"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.0
	X.Org XInput driver : 0.6
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1106,3189 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 1186,1300 card 1186,1301 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0e:0: chip 1103,0007 card 1103,0001 rev 01 class 01,04,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 15bd,1001 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e44 card 1458,4012 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e64 card 1458,4013 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b]
	[1] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[2] -1	0	0x0000a800 - 0x0000a8ff (0x100) IX[b]
	[3] -1	0	0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd8000000 - 0xe7ffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700 Pro] rev 0, Mem @ 0xd8000000/27, 0xe9000000/16, I/O @ 0xa000/8
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary) rev 0, Mem @ 0xe0000000/27, 0xe9010000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xeb002000 - 0xeb0020ff (0x100) MX[b]
	[1] -1	0	0xeb001000 - 0xeb0017ff (0x800) MX[b]
	[2] -1	0	0xeb000000 - 0xeb0000ff (0x100) MX[b]
	[3] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[b]O
	[4] -1	0	0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
	[5] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[6] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[b]
	[7] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[b]
	[8] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[9] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[10] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[11] -1	0	0x0000c800 - 0x0000c87f (0x80) IX[b]
	[12] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[13] -1	0	0x0000c000 - 0x0000c003 (0x4) IX[b]
	[14] -1	0	0x0000bc00 - 0x0000bc07 (0x8) IX[b]
	[15] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[16] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[17] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[b]
	[18] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
	[0] -1	0	0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
	[1] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xeb002000 - 0xeb0020ff (0x100) MX[b]
	[1] -1	0	0xeb001000 - 0xeb0017ff (0x800) MX[b]
	[2] -1	0	0xeb000000 - 0xeb0000ff (0x100) MX[b]
	[3] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[b]O
	[4] -1	0	0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
	[5] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[6] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[b]
	[7] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[b]
	[8] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[9] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[10] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[11] -1	0	0x0000c800 - 0x0000c87f (0x80) IX[b]
	[12] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[13] -1	0	0x0000c000 - 0x0000c003 (0x4) IX[b]
	[14] -1	0	0x0000bc00 - 0x0000bc07 (0x8) IX[b]
	[15] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[16] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[17] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[b]
	[18] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
	[1] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xeb002000 - 0xeb0020ff (0x100) MX[b]
	[5] -1	0	0xeb001000 - 0xeb0017ff (0x800) MX[b]
	[6] -1	0	0xeb000000 - 0xeb0000ff (0x100) MX[b]
	[7] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[b]O
	[8] -1	0	0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[10] -1	0	0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
	[11] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[14] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[b]
	[15] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[b]
	[16] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[17] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[18] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[19] -1	0	0x0000c800 - 0x0000c87f (0x80) IX[b]
	[20] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[21] -1	0	0x0000c000 - 0x0000c003 (0x4) IX[b]
	[22] -1	0	0x0000bc00 - 0x0000bc07 (0x8) IX[b]
	[23] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[24] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[25] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[b]
	[26] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.1.1, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.35.5
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.35.5
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.35g1                           
(II) ATI Proprietary Linux Driver Build Date: Mar 27 2007 12:13:03
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.35.1.1.2.3-driver-lnx-x86-x86_64-334085
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E44) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xeb002000 - 0xeb0020ff (0x100) MX[b]
	[5] -1	0	0xeb001000 - 0xeb0017ff (0x800) MX[b]
	[6] -1	0	0xeb000000 - 0xeb0000ff (0x100) MX[b]
	[7] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[b]O
	[8] -1	0	0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[10] -1	0	0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
	[11] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[14] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[b]
	[15] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[b]
	[16] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[17] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[18] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[19] -1	0	0x0000c800 - 0x0000c87f (0x80) IX[b]
	[20] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[21] -1	0	0x0000c000 - 0x0000c003 (0x4) IX[b]
	[22] -1	0	0x0000bc00 - 0x0000bc07 (0x8) IX[b]
	[23] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[24] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[25] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[b]
	[26] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e27d0
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xeb002000 - 0xeb0020ff (0x100) MX[b]
	[5] -1	0	0xeb001000 - 0xeb0017ff (0x800) MX[b]
	[6] -1	0	0xeb000000 - 0xeb0000ff (0x100) MX[b]
	[7] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[b]O
	[8] -1	0	0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[10] -1	0	0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
	[11] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[17] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[b]
	[18] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[b]
	[19] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[20] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[21] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[22] -1	0	0x0000c800 - 0x0000c87f (0x80) IX[b]
	[23] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[24] -1	0	0x0000c000 - 0x0000c003 (0x4) IX[b]
	[25] -1	0	0x0000bc00 - 0x0000bc07 (0x8) IX[b]
	[26] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[27] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[28] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[b]
	[29] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
	[30] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[31] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9700 PRO" (Chipset = 0x4e44)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x4012)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xe9000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI R300
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R300
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.35.5
	ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GWY  Model: 311  Serial#: 7192206
(II) fglrx(0): Year: 1996  Week: 26
(II) fglrx(0): EDID Version: 1.0
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.714/0.286 V
(II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33  vert.: 24
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.625 redY: 0.340   greenX: 0.280 greenY: 0.595
(II) fglrx(0): blueX: 0.155 blueY: 0.070   whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 110.0 MHz   Image Size:  300 x 225 mm
(II) fglrx(0): h_active: 1280  h_sync: 1360  h_sync_end 1472 h_blank_end 1720 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1030 v_blanking: 1067 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 34 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 110.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  110.00  1280 1360 1472 1720  1024 1025 1030 1067 +hsync +vsync
(**) fglrx(0):  Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   85.51  1280 1344 1480 1680  1024 1025 1028 1083 interlace +hsync
(**) fglrx(0):  Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   77.80  1280 1344 1480 1680  1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"   56.25  800 832 896 1048  600 601 604 631
(**) fglrx(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0):  Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"   68.17  800 848 936 1072  600 601 604 636 +hsync
(**) fglrx(0):  Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"   60.06  800 840 928 1056  600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"   43.16  640 680 744 848  480 481 484 509 +hsync
(**) fglrx(0):  Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"   37.89  640 672 736 832  480 481 484 506 +hsync
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"   96.76  1152 1224 1344 1536  864 865 868 900 +hsync
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0):  Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"   64.67  1152 1208 1328 1504  864 865 868 915 interlace +hsync
(**) fglrx(0):  Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"   58.28  1152 1200 1320 1488  864 865 868 911 interlace +hsync
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   32.66  720 744 816 912  576 577 580 597 +hsync
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (330, 240) mm
(--) fglrx(0): DPI set to (98, 108)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 110.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  110.00  1280 1360 1472 1720  1024 1025 1030 1067 +hsync +vsync
(**) fglrx(0):  Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   85.51  1280 1344 1480 1680  1024 1025 1028 1083 interlace +hsync
(**) fglrx(0):  Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   77.80  1280 1344 1480 1680  1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"   56.25  800 832 896 1048  600 601 604 631
(**) fglrx(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0):  Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"   68.17  800 848 936 1072  600 601 604 636 +hsync
(**) fglrx(0):  Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"   60.06  800 840 928 1056  600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"   43.16  640 680 744 848  480 481 484 509 +hsync
(**) fglrx(0):  Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"   37.89  640 672 736 832  480 481 484 506 +hsync
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"   96.76  1152 1224 1344 1536  864 865 868 900 +hsync
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0):  Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"   64.67  1152 1208 1328 1504  864 865 868 915 interlace +hsync
(**) fglrx(0):  Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"   58.28  1152 1200 1320 1488  864 865 868 911 interlace +hsync
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   32.66  720 744 816 912  576 577 580 597 +hsync
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe9000000 - 0xe900ffff (0x10000) MX[b]
	[1] 0	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[6] -1	0	0xeb002000 - 0xeb0020ff (0x100) MX[b]
	[7] -1	0	0xeb001000 - 0xeb0017ff (0x800) MX[b]
	[8] -1	0	0xeb000000 - 0xeb0000ff (0x100) MX[b]
	[9] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[b]O
	[10] -1	0	0xe9000000 - 0xe900ffff (0x10000) MX[b](B)
	[11] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
	[12] -1	0	0xe9010000 - 0xe901ffff (0x10000) MX[b](B)
	[13] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
	[17] 0	0	0x0000a000 - 0x0000a0ff (0x100) IX[b]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[20] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[b]
	[21] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[b]
	[22] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[23] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[24] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[b]
	[25] -1	0	0x0000c800 - 0x0000c87f (0x80) IX[b]
	[26] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[27] -1	0	0x0000c000 - 0x0000c003 (0x4) IX[b]
	[28] -1	0	0x0000bc00 - 0x0000bc07 (0x8) IX[b]
	[29] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[30] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[31] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[b]
	[32] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
	[33] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
	[34] 0	0	0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7f18000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.35.5
(II) fglrx(0):     Date: Mar 27 2007
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.17-11-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): [pci] find AGP GART
(II) fglrx(0): [agp] Mode=0x1f000a0b bridge: 0x1106/0x3189
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000b0a
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xd0000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000302)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] texture shared area handle = 0x00008000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x00701000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete

et j'ai un ecran Gateway vivitron 17 qui date un peu mais qui me convient trés bien et qui n'est pas détecté lor de l'installation des pilotes alors je les configurer à la main.

Dernière modification par wholehog2 (Le 07/04/2007, à 16:25)

Hors ligne

#7 Le 07/04/2007, à 16:47

benefice

Re : plantage serveurx aprés instal driver ati

Ok donc point de vue du log pas de pro ton écran est "standard" donc je pense que le problème vient de tes multiples tentatives et qu' il faudrait un bon nettoyage.

  - On va commencer par :

sudo apt-get autoremove

- Ensuite dans adept tu tapes fglrx et tu vire TOUT

  - tu peux aussi relancer "envy" et choisir l' option de désinstallation

  - Aprés tout ça tu refait un petit :

sudo apt-get autoremove

Tu redémarre et tu peux réssayer une installe avec tes pilotes :

sudo kate /etc/default/linux-restricted-modules-common

et tu mets "fglrx" en face de : DISABLED_MODULES=""

Ensuite :

sudo apt-get update
sudo apt-get install module-assistant build-essential 
sudo apt-get install fakeroot dh-make debconf libstdc++5 gcc-3.3-base linux-headers-$(uname -r)

tu te mets dans le dossier oû tu a télécharger ton driver et :

chmod +x ati-driver-installer-8.34.8-x86.x86_64.run
sudo ln -sf bash /bin/sh
./ati-driver-installer-8.34.8-x86.x86_64.run --buildpkg Ubuntu/edgy

ATTENTION ce n' est pas ta version (8.34.8) donc tu remplace par la tienne et la dernière ligne je sais plus si tu peux laisser comme sa ou mettre Kubuntu/edgy

  - Aprés :

sudo dpkg -i xorg-driver-fglrx_8.34.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.34.8-1_i386.deb
sudo dpkg -i fglrx-control_8.34.8-1_i386.deb
sudo dpkg -i fglrx-sources_8.34.8-1_i386.deb
sudo dpkg -i xorg-driver-fglrx-dev_8.34.8-1_i386.deb

ATTENTION ce n' est pas ta version (8.34.8) donc tu remplace par la tienne ou aprés avoir juste taper le début jusqu' a "...fglrx_" tu appuie sur "Tab" et sa t' écrit le reste correctement.

  - Ensuite :

sudo rm /usr/src/fglrx-kernel*.deb

Si tu as une erreure, kà c' est pas grave.

  - Ensuite :

sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a

- Et:

sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv

- Redémarrage et :

fglrxinfo

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#8 Le 07/04/2007, à 17:07

wholehog2

Re : plantage serveurx aprés instal driver ati

je fais tout ça et je te dis

Hors ligne

#9 Le 07/04/2007, à 18:15

wholehog2

Re : plantage serveurx aprés instal driver ati

je viens de suivre scrupuleusement tes indications et j'ai toujours le même probleme.

c'est dommage je pense qu'on est pas loin de la solution

une autre idée peut etre

Dernière modification par wholehog2 (Le 11/04/2007, à 17:09)

Hors ligne

#10 Le 07/04/2007, à 18:22

benefice

Re : plantage serveurx aprés instal driver ati

c' est toujours pareil ? tu n' as pas de quoi taper quelquechose ?

sinon envoi moi ton xorg.conf

moi j' avais une 9600 pro sous edgy donc ...

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#11 Le 07/04/2007, à 18:31

wholehog2

Re : plantage serveurx aprés instal driver ati

oui ça doit etre sensiblement pareil

voici mon xorg.conf  (je commenté les 3 dernières lignes sinon pas de boot)

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg


Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
EndSection

Section "Module"

#	Load  "bitmap"
#	Load  "dbe"
#	Load  "ddc"
#	Load  "dri"
#	Load  "extmod"
#	Load  "freetype"
#	Load  "glx"
#	Load  "int10"
#	Load  "type1"
#	Load  "vbe"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "ServerFlags"
	Option	    "AIGLX" "off"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"

# 2 lignes suivantes rajouté
	Identifier   "Vivitron 17"
	HorizSync    30.0 - 64.0
	VertRefresh  50.0 - 100.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
	Monitor    "Vivitron 17"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

#Section "Extensions"
#	Option	    "Composite" "disable"
#EndSection

Hors ligne

#12 Le 07/04/2007, à 19:40

wholehog2

Re : plantage serveurx aprés instal driver ati

est ce que vous pensez que d'installer un driver plus ancien pourrait résoudre mon problème ?

Hors ligne

#13 Le 07/04/2007, à 19:42

NiKo973

Re : plantage serveurx aprés instal driver ati

Tu as fait comment pour installer tes drivers ? Ne nous dis pas que tu as utilisé l'installeur graphique parce qu'apparemment une méthode console marche parfaitement. ^^

Hors ligne

#14 Le 07/04/2007, à 20:22

wholehog2

Re : plantage serveurx aprés instal driver ati

non non j'ai suivi les indications de benefice.

Hors ligne

#15 Le 07/04/2007, à 21:50

wholehog2

Re : plantage serveurx aprés instal driver ati

j'ai trouvé sur ce site http://odin.prohosting.com/wedge01/gent … _kernelver
que l'option suivante du kernel devait etre à disable

# Device drivers -> Character Devices -> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support): DISABLED
This option is not required, and will almost certainly prevent the driver from working if enabled.

dans mon kernel elle est à enable

est ce que vous pensez que c'est la source de mon problème ?

Hors ligne

#16 Le 07/04/2007, à 22:25

benefice

Re : plantage serveurx aprés instal driver ati

Je pense que ton problème doit venir de ton écran (en tout cas je l' espère) car si tu n' as pas la possibilité de taper quelquechose, ton système doit croire que c' est bon mais ton écran ne t' affiche rien.

Pour cela modifie dans ton xorg.con la section "monitor", comme cela :

Section "Monitor"
	Identifier   "Vivitron 17"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

recopie et colle par dessus tes 5 lignes, j' ai fait en sorte de juste changer Sync et refresh et de disposer un peu mieu car xorg.conf m' a déjà fait une erreure juste pour un espace en trop.

Tu peux aussi décomenté la section composite car de toute façon avec une ATI si tu veux une bonne accélération 3D c' est indispensable.

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#17 Le 08/04/2007, à 17:23

wholehog2

Re : plantage serveurx aprés instal driver ati

il y a du nouveau !

quand je remplace la section monitor par celle que tu m'as donné et que je mets ou pas la section composite, kubuntu démarre en mode console !
Donc à mon avis, il faut cherché sur cette voit.
quand pense tu ? et que dois je faire ?

encore merci

Hors ligne

#18 Le 08/04/2007, à 21:11

benefice

Re : plantage serveurx aprés instal driver ati

alors dans ce cas c' est trés simple tu tapes :

startx

Et il va te marqué une légende : [EE] erreur, [WW] warning etc ...
Et ensuite il te dit l' erreur avec la légende qui va bien ([...]) ainsi que la ligne oû il y a l' erreur et là on serra sur de se qu' il faut modifier mème si je sais déjà ...

Le problème c' est la fréquence de rafraichissement et la résolution que supporte ton écran et si sa ne marche toujours pas c' est surement car je t' ai donner des valeurs de mon 19" et je suis sur quand rentrant des valeurs d' un 17" se serra bon, mais avant on va verifier que c' est bien ça et si tu pouvait me donner le résultat de l' erreur avec le numèro de ligne ainsi que le ou les lignes concernées dans quelques minutes aprés tes renseignements et mes réponses tu aurras ton accélération avec ton affichage.

P.S. : désolé pour l' attente, pâque oblige ...

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#19 Le 08/04/2007, à 22:19

wholehog2

Re : plantage serveurx aprés instal driver ati

tu n'as pas à t'excuser, c'est sympa de m'aider.

malheureusement fausse joie, je me suis trompé en modifiant le fichier xorg.conf

en fait en ajoutant tes lignes pour l'écran j'ai toujours le même problème.

n'y aurait il pas un log ou je puisse voir l'erreur ?

p.s. si ça peut t'aider j'ai trouvé un site ou il parle de l'instal de ma carte graphique mais ça date vu que c'est avec xfree et le driver 8.19
http://ustilago.free.fr/radeon.html

Dernière modification par wholehog2 (Le 08/04/2007, à 22:24)

Hors ligne

#20 Le 08/04/2007, à 23:59

benefice

Re : plantage serveurx aprés instal driver ati

Mince !!! sinon sous Edgy, ma carte (9600 pro) et je suis pas le seul, s' installer trés bien avec l' accélération graphique.

C' est pour cela que je pense qu' il vaut mieux se diriger vers ton écran car c' est un problème que j' ai déjà rencontré (enfin des collègues ou sur les forums).

Peux tu me préciser se que tu as voulu me dire par "je me suis tromper avec xorg.conf" et aussi me dire dans quel cas tu t' ai retrouvé ave une invite de console ?

Sinon à la section "screen" essaye en enlevant toutes les valeurs au dessus de "800x600" à toutes les lignes car j' avais pas remarqué mais, pour certains 17" "1280x1024" sa passe pas !!! Et avec "800x600" on est sur que sa passe et puis si sa marche tu pourras aller vers "1024x768"

Pour le log, en faite, si Xorg.0.log ne te dit rien c' est que le server graphique va bien (normalement) et ton affichage c' est (en gros) :

- le server X (xorg)
- ta carte graphique
- ton écran
- le noyau
(c' est pas dans l' ordre wink )

Donc on va dire que ta carte va bien xorg aussi (puisque Xorg.0.log te dit rien de grave), ton noyau va bien, alors il reste que l' écran !

Je peu me tromper, mais je pense que sa doit être ça, change bien se que je t' ai dit au niveau de la section "screen" sinon le mieux (à moins que quelque un ai la réponse), c' est de réinstaller car si c' est pas les valeurs concernant le rafraichissement et la résolution de ton écran, ni xorg, ni les pilotes, alors je voie pas et une réinstallation réglerais un problème que je n' ai pas sue identifier.

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#21 Le 09/04/2007, à 17:59

wholehog2

Re : plantage serveurx aprés instal driver ati

alors, pour ta première question (je me suis trompé dans le xorg.conf) en fait j'ai commenté les 2 sections screen (je voulais garder mon ancienne config en la commentant dans le fichier) mais j'ai aussi commenté par erreur celle que tu m'as donné.
donc x ne pouvait pas démarrer, il ne trouvait pas d'écran.
aprés correction, retour à la case départ.

plutot que d'enlever les résolutions, est ce qu'il vaudrait pas mieux effacé le fichier xorg.conf puis réinstaller, car je me suis apperçu qu'a la réinstallation il reprenait la config du fichier xorg.conf existant ?

je pense qu'on tiens le bon bout !

Hors ligne

#22 Le 09/04/2007, à 19:09

wholehog2

Re : plantage serveurx aprés instal driver ati

je viens d'essayé de laisser que le 800x600 et le 640x480 mais c'est pareil hmm

Hors ligne

#23 Le 09/04/2007, à 19:12

benefice

Re : plantage serveurx aprés instal driver ati

tu peux m' envoyer ton xorg.conf ?

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

#24 Le 09/04/2007, à 20:08

wholehog2

Re : plantage serveurx aprés instal driver ati

le voila 

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "ServerFlags"
	Option	    "AIGLX" "off"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

#Section "Monitor"

# 2 lignes suivantes rajouté
#	Identifier   "Vivitron 17"
#	HorizSync    30.0 - 64.0
#	VertRefresh  50.0 - 100.0
#	Option	    "DPMS"
#EndSection

Section "Monitor"
    Identifier   "Vivitron 17"
    Option        "DPMS"
    HorizSync    28-51
    VertRefresh    43-60
EndSection


Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
	Monitor    "Vivitron 17"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "disable"
EndSection

Hors ligne

#25 Le 09/04/2007, à 21:21

benefice

Re : plantage serveurx aprés instal driver ati

Là je séche ...

réssaye, sans rien changer et regarde si ctr-alt F1 t' amène sur une console.

remet "1024x768" et réssaye ctr-alt F1

remet tes anciennes config du monitor et commante les miennes et toujours pareil réssaye ctr-alt F1

Sinon dernière soluce c' est la réinstall car je voie vraiment pas ...

Désolé j' aurais bien voulu trouvé la solution ...

Une coquille est, par essence, assez contradictoire car sans le q c'est une couille.

Hors ligne

Pages : 1 2