Pages : 1
#1 Le 04/04/2007, à 21:42
- Jamesb
Xorg.conf malmené avec Nvidia
Salut à tous,
Aujourd'hui j'ai eu un très gentil pote qui a réussi à m'installer parfaitement beryl et les drivers nvidia avec. Tout marchait bien nickel jusqu'au moment où j'ai été activé dans les paramètres Nvidia du serveur X, le double écran.
Quand j'ai redémarrer, eh bien je me suis retrouvé avec une belle erreur de serv X et paf en ligne de commande. Malheureusement je n'ai pas sauvé mon Xorg.conf et c'est le seul problème qu'il y a. Pour l'instant je n'ai rien effacer, ni installer pour éviter de m'ajouter du travail.
Je suis donc passé en mode driver NV pour pouvoir revenir à une interface graphique.
Voilà la dernière version de mon fichier Xorg.conf après avoir changé les configs dans le panneau de controle des drivers Nvidia. (Malheureusement mon clavier et mon son ne sont plus configurés, je ne sais pas si c'est lier)
Xorg.conf (qui ne marche pas)
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Feb 26 23:38:46 PST 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
Option "XkbOptions" "lv3:ralt_switch"
Option "XkbVariant" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "hp f1723"
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "hp f1723"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSectionEt voici celui que j'ai maintenant en mode "debug" avec les drivers NV
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch-fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "GeForce 7800 GTX"
Driver "nv"
BusID "PCI:1:0:0"
Option "NvAGP" "3"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "GeForce 7800 GTX"
# Monitor "Default Screen"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionLes drivers installé sont les derniers sur le site de Nvidia. (fichier .run x86). J'ai une GeForce 7800GTX et deux écrans. Pour l'instant 1 seul me suffira tant que ça remarche !
Je tiens à vous remercier d'avance pour votre aide ! et je trouve ce site et le forum vraiment très utile pour s'en sortir de situation comme celle-ci. Merci beaucoup !
Jamesb.
#2 Le 04/04/2007, à 22:19
- rahancrao
Re : Xorg.conf malmené avec Nvidia
Salut,
J'ai grosso modo la même config que toi : deux écrans 19 ", une geforce 7950 et beryl tourne sans problème. Voilà mon xorg.conf (pour écran étendu).
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Dec 15 10:12:14 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "SyncMaster"
DefaultDepth 24
Option "DisableGLXRootClipping" "True"
Option "TwinView" "True"
Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Option "TwinViewOrientation" "RightOf"
Option "AddARGBGLXVisuals" "True"
Option "TripleBuffer" "true"
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionCe même fichier fonctionnait avec une 7800 GS et il a fonctionné de même avec Sabayon Linux.
Ingé en préprod Unix : forcément sous GNU/Linux à la maison (Ubuntu 10.10 + ArchLinux tout neuf)
Hors ligne
#3 Le 04/04/2007, à 22:35
- Jamesb
Re : Xorg.conf malmené avec Nvidia
Salut rahancrao,
merci d'avoir répondu si rapidement !
Alors j'ai repris ta config et mis mon écran hp 1723 à la place. J'ai repris les sections monitor, device et screen.
J'ai 2 messages d'erreurs importants:
- Il n'arrive pas à lancer le module GLX
- Il trouve une version différente du kernel nvidia x.x.850 et x.x.950 (quelque chose comme ça)
Mh, je suis perplexe et je ne sais pas s'il faut réinstaller les drivers nvidia, le kernel aussi ?
Et pour l'instant, j'ai toujours pas de son. (Le clavier est bon maintenant)
Merci d'avance !
PS: c'est bon j'ai réussi à remettre le son, y'a plus que le problème des drivers 
Dernière modification par Jamesb (Le 04/04/2007, à 22:46)
Hors ligne
#4 Le 04/04/2007, à 23:12
- rahancrao
Re : Xorg.conf malmené avec Nvidia
Je ne saurais que te conseiller d'installer envy qui te permettra d'installer je l'espère proprement le driver nvidia :
Donc à partir de cette doc, crée un répertoire envy dans ton home, lance un terminal dedans et lance les commandes suivantes :
pour récupérer le .deb
wget http://albertomilone.com/ubuntu/nvidia/scripts/envy_0.9.1-0ubuntu4_all.debpour l'installer
sudo dpkg -i envy_0.9.1-0ubuntu4_all.debEnsuite, vu que tu semble avoir des paquets conflictuels (je sors ça de je ne sais plus où, de la doc sans doute, c'est une feuille imprimée il y a quelques mois) :
Edition du fichier "linux-restricted-modules-common"
le fichier doit ressembler à ça :
DISABLED_MODULES="nv"
installation des dépendances :
sudo apt-get install linux-headers-`uname -r` build-essential gcc gcc-3.4 xserver-xorg-devSuppression des paquets conflictuels :
sudo apt-get --purge remove nvidia-glx nvidia-settings nvidia-kernel-commonSuppression du script nvidia :
sudo rm /etc/init.d/nvidia-*(cette commande ne trouvera sans doute rien)
Ensuite, sors de ta session (CTRL+ALT+F1), connecte toi s'il le faut, lance la commande
envyet lance le choix "désinstallation du driver nvidia" (choix 2 ?, je ne sais plus).
Lance ensuite l'installation du driver via envy, répond yes ou Y partout (il va te proposer de reconfigurer xorg) sauf à la fin où il te propose de relancer gdm.
A ce stade (si tu y arrive, je l'espère), fais un backup de /etc/X11/xorg.conf et remplace le avec les sections screen, device, monitor ... de celui que je t'ai filé (Monitor "SyncMaster") n'étant qu'un identifiant, tu pourrais mettre toto, c'est pareil.
A ce stade, tu peut relancer gdm :
sudo /etc/init.d/gdm stopsudo /etc/init.d/gdm startBon ba forcément, je ne garantie rien, mais chez moi ça marche à chaque update d'xorg (comme ce matin).
Dernière modification par rahancrao (Le 04/04/2007, à 23:16)
Ingé en préprod Unix : forcément sous GNU/Linux à la maison (Ubuntu 10.10 + ArchLinux tout neuf)
Hors ligne
Pages : 1