Ubuntu-fr

gedeon555

XGL excessivement lent avec une carte ATI Radeon 9700 Pro

Je viens d'installer ubuntu sur mon ordi, puis les drivers propriétaires ATI (fglrx) à l'aide du script envy. Au redémarrage, je constate que mes pilotes fonctionnent à merveille. Je décide donc d'installer XGL pour ensuite installer beryl mais là, c'est le drame... XGL démarre normalement mais dès que je fais une action (clique sur le menu KDE, clique droit sur le bureau, affichage d'une fenetre, ...), je dois attendre plusieurs minutes (sans exagérer). Je comprend pas du tout pourquoi ca me fait ca, d'autant plus que lorsque je reviens sur ma session xorg, tout remarche.

Je vous montre ci-dessous mon fichier xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	HorizSync    28.0 - 80.0
	VertRefresh  43.0 - 60.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:3:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "Disable"
EndSection

ainsi que la facon dont je démarre XGL :

Xgl -fullscreen :1 -ac -accel glx:pbuffer -accel xv:pbuffer & sleep 2 && DISPLAY=:1
exec startkde

wholehog2

Re : XGL excessivement lent avec une carte ATI Radeon 9700 Pro

bonjour ,
je possède aussi une ati radéon 9700 pro maya 2 et je galère pour faire fonctionner la 3D.

je voulais savoir quel kernel tu as car dans mon xorg.0.log il me dit : "Kernel Module version does *not* match driver"

pour ton souci que donne la commande fglrxinfo.

Tybbow

Re : XGL excessivement lent avec une carte ATI Radeon 9700 Pro

XGL sans beryl est lent.. Installe beryl et démarre le. Peut être que cela résoudra ton problème.