#1 Le 28/03/2007, à 06:25
- Neoo
Drivers officiel ATI pour X800Xt Prob avec BERYL...
Ayant lutter pas mal pour installer les drivers officiels de ATI je met a disposition mon xorg pour que vous me disiez ou est le problème svp
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorgSection "ServerLayout"
Identifier "Default Layout"
Screen "aticonfig-Screen[0]"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSectionSection "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSectionSection "Module"
Load "dri"
Load "dbe"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "type1"
Load "vbe"
Load "glx"
Load "GLcore"
Load "v4l"
EndSectionSection "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSectionSection "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSectionSection "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSectionSection "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "DRI" "true"
Option "XAANoOffscreenPixmaps" "true"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
Option "GARTSize" "64"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
Option "ColorTiling" "1"
Option "EnableDepthMoves" "yes"
Option "UseFBDev" "false"
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "mtrr" "on"
Option "SubPixelOrder" "none"
Option "DPMS"
Option "DynamicClocks" "on"
EndSectionSection "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"Monitor "SyncMaster"
DefaultDepth 24SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSectionSubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSectionSubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSectionSubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSectionSubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSectionSubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSectionEndSection
Section "DRI"
Mode 0666
EndSectionSection "Extensions"
Option "Composite" "Disable"
Option "RENDER" "Enable"
EndSection
Et Voila l'erreur que j'ai au lancement de beryl :
(heliodor:7247): Gdk-WARNING **: Using Cairo rendering requires the drawable argument to
have a specified colormap. All windows have a colormap,
however, pixmaps only have colormap by default if they
were created with a non-NULL window argument. Otherwise
a colormap must be set on them with gdk_drawable_set_colormap(heliodor:7247): Gdk-CRITICAL **: gdk_cairo_create: assertion `GDK_IS_DRAWABLE (drawable)' failed
Merci d'avance pour vos réponse 
Dernière modification par Neoo (Le 28/03/2007, à 06:26)
Ce qui est affirmé sans preuve peut être nié sans preuve
Hors ligne
#2 Le 28/03/2007, à 16:27
- Neoo
Re : Drivers officiel ATI pour X800Xt Prob avec BERYL...
Up
Ce qui est affirmé sans preuve peut être nié sans preuve
Hors ligne