Pages : 1
#1 Le 17/03/2007, à 10:08
- freaks
[résolu] beryl gforce mx4000
hello,
je tente d'installer un ordi avec cette carte, j'ai pri le driver Legacy 1.0-7184
mais au démarrage de beryl, le terminal m'indique l'erreur :
*************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : NVIDIA
Checking Display :0.0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
Checking Screen 0 ...
Xlib: extension "GLX" missing on display ":0.0".
Root visual is not a GL visualdois je installer xgl ?
Dernière modification par freaks (Le 17/03/2007, à 11:16)
2.6.17-10-386
ubuntu
http://www.freak.fr
Hors ligne
#2 Le 17/03/2007, à 10:43
- Lestat the vampire
Re : [résolu] beryl gforce mx4000
Tu pourrais preciser le modele exact de ta carte graphique stp ?? (avec un petit lspci par exemple), es-tu sur de devoir installer les drivers legacy ? par quelle méthode as-tu installé les drivers ? Vérifies aussi qu'il y ait bien la ligne Load "glx" dans ton xorg.conf.
Hors ligne
#3 Le 17/03/2007, à 10:55
- freaks
Re : [résolu] beryl gforce mx4000
merci
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)jai utilise la methode manuelle (http://doc.ubuntu-fr.org/nvidia.run) que j'ai l'habitude de pratiquer pour des cartes style 7300
peux être me suis - je trop vite précipité sur les LEGACY?
voici mon xorg
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dbe"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX 4000 AGP 8x]"
Driver "nvidia"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "PHILIPS 107S"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 4000 AGP 8x]"
Monitor "PHILIPS 107S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
#Section "DRI"
# Mode 0666
#EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionDernière modification par freaks (Le 17/03/2007, à 11:04)
2.6.17-10-386
ubuntu
http://www.freak.fr
Hors ligne
#4 Le 17/03/2007, à 11:17
- freaks
Re : [résolu] beryl gforce mx4000
oui voila en fait je me suis trompé dans le driver
désolé de t'avoir dérangé et merci
2.6.17-10-386
ubuntu
http://www.freak.fr
Hors ligne
Pages : 1