Ubuntu-fr

StK

[Résolu]Erreur lors de l'activation de la configuration XKB.

Salut à tous,

J'ai une erreur au lancement de X/Gnome, pas bien méchante mais bon si y'a moyen qu'elle disparaisse c'est pas plus mal

Je tourne sous ubuntu 5.04 x86.

Elle est présente depuis que j'ai installer le pilote propriétaire ATI et effectuer un "fglrxconfig".

Erreur lors de l'activation de la configuration XKB.
Cela peut arriver pour plusieurs raisons :
- un bogue dans la bibliothèque libxklavier
- un bogue dans le serveur X (xkbcomp, utilitaires xmodmap)
- serveur X avec une implémentation de libxkbfile incompatible

Données de version du serveur X :
The X.Org Foundation
60802000

Si vous rapportez cette situation comme une anomalie, veuillez inclure :
- Le résultat de <b>xprop -root | grep XKB</b>
- Le résultat de <b>gconftool-2 -R /desktop/gnome/peripherals/keyboard/kbd</b>

résultats des commandes:

stk@stk:~$ xprop -root | grep XKB
_XKB_RULES_NAMES_BACKUP(STRING) = "xfree86", "pc105", "fr", "", ""
_XKB_RULES_NAMES(STRING) = "xfree86", "pc105", "fr", "", ""

stk@stk:~$ gconftool-2 -R /desktop/gnome/peripherals/keyboard/kbd
 layouts = [fr-latin9]
 model = pc105
 overrideSettings = false
 options = []

Merci d'avance !

ps: j'ai effectuer une recherche avant de poster, j'ai trouvé 2 erreurs similaires, mais l'une a été résolu par un passage en fr-latin et l'autre est restée sans réponses

Dernière modification par StK (Le 27/08/2005, à 01:28)

ZeBob

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

ah tout hasard tu peux balancer ton xorg.conf plz ? (il est dans /etc/X11/)

StK

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

il est pas très joli a voir pour le moment j'te préviens ^^

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"fr"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   55 - 85
    VertRefresh 60 - 85
    Option "DPMS"

  # 1280x960 @ 85.00 Hz (GTF) hsync: 85.68 kHz; pclk: 149.43 MHz
  Modeline "1280x960_85.00"  149.43  1280 1376 1512 1744  960 961 964 1008  -HSync +Vsync


EndSection


Section "Monitor"
    Identifier  "Monitor1"
    HorizSync   30 - 60
    VertRefresh 50 - 60
    Option "DPMS"

  # 1024x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 64.11 MHz
  Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "Single,Reverse"
    Option "HSync2"                     "31.5 - 80.5" 
    Option "VRefresh2"                  "60 - 85" 
    Option "ScreenOverlap"              "0" 
    Option "GammaCorrectionI"           "0x06419064"
    Option "GammaCorrectionII"          "0x06419064"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "yes"
    Option "FSAACustomizeMSPos"         "yes"
    Option "FSAAMSPosX0"                "0.250000"
    Option "FSAAMSPosY0"                "0.416666"
    Option "FSAAMSPosX1"                "0.083333"
    Option "FSAAMSPosY1"                "0.083333"
    Option "FSAAMSPosX2"                "0.416666"
    Option "FSAAMSPosY2"                "0.750000"
    Option "FSAAMSPosX3"                "0.750000"
    Option "FSAAMSPosY3"                "0.916666"
    Option "FSAAMSPosX4"                "0.583333"
    Option "FSAAMSPosY4"                "0.250000"
    Option "FSAAMSPosX5"                "0.916666"
    Option "FSAAMSPosY5"                "0.583333"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:2:0:0"    # vendor=1002, device=4e48
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x960_85.00" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection

    Subsection "Display"
        Depth       16
        Modes       "1280x960_85.00" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection


EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Merci pour ta réponse (très rapide )

ZeBob

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

de rien mais je suis mort là donc je verrais ça demain
sinon pourquoi t'as fait un "fglrxconfig" ? t'as pas ton ancien xorg.conf sous le coude, ? normalement suffit de changer ati par fglrx et tout fonctionne.

Hum essaye de changer Option "XkbRules"    "xfree86"
par Option "XkbRules"    "xorg"
et Driver "kbd" par Driver "keyboard"

(je dis ça par comparaison à mon xorg....)

EDIT:faut vraiment que j'aille me pieuter!

Dernière modification par ZeBob (Le 27/08/2005, à 01:20)

StK

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

Yes c'est ça ! (j'ai mis xorg à la place de xfree86)

Merci pour le coup de main et bonne nuit

ZeBob

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

de rien, mon plaisir
/me retourne se coucher

StK

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

sinon pourquoi t'as fait un "fglrxconfig" ? t'as pas ton ancien xorg.conf sous le coude, ? normalement suffit de changer ati par fglrx et tout fonctionne.

J'ai fais comme indiquer dans le wiki ....

Enfin

    * utiliser fglrxconfig pour générer un fichier xorg.conf aux petits oignons (surtout pour la configuration du double écran)

sudo fglrxconfig

J'avais fais fglxconfig pour configurer mon double écran (qui ne fonctionne pas, c'est la prise de tete du moment)

Dernière modification par StK (Le 27/08/2005, à 01:46)

ZeBob

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

ah ok...ah ok tu installes quels pilotes, les proprio ?

Bon j'ai fais des recherches dans mes anciens posts:

Step 3: Now type
Code:
# sudo gedit /etc/X11/xorg.conf

In your xorg.conf file make sure that under Section "Module" the following lines are listed
Code:

Load "dri" Load "glx"
Now look for Section "Device" And make sure that it looks like the following
Code:
Identifier "Radeon" Driver "fglrx" Option "UseInternalAGPGART" "no" BusID "PCI:3:0:0"

Its okay if your Identifier is different and if your BusID is different aswell. But make sure your Driver says "fglrx" and that you have the "Option "UseInternalAGPGART" "no" " Right below it.

Now look for another section. Most of the time this is the last one listed.
Code:

Section "DRI" Mode 0666 EndSection

Voilà les modifs à faire sur ton ancien xorg.conf
Pour ce qui est du dual il me semble que les drivers ATI installent un petit utilitaire qui permet de passer du mono écran au dual. je crois qu'il est dans /usr/X11R6/bin Tiens je crois même que c'est fireglcontrol (dans l'onglet DualScreen)

Dernière modification par ZeBob (Le 27/08/2005, à 11:08)

StK

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

oki, merci pour ces infos complémentaires

[hs]
Sinon pour le dual j'ai un peu éplucher les posts sur le forum, j'ai quelques bidouilles à tester, et encore pas mal à lire.

L'utilitaire ATI n'est hélas pas assez complet pour ce que je veux faire:

écran primaire sur la sortie DVI en 1280*960@85hz (85 en hsync aussi) et écran secondaire sur la sortie VGA en 1024*768@60hz (hsync inconnue pour le moment), le tout en "bureau étendu"

Et puis cette nuit j'ai laché cette prise de tete pour me lancer dans la compilation d'un noyau (qui a réussit du premier coup, a mon grand étonnement lol) je suis donc en kernel 2.6.12.5

ah ok...ah ok tu installes quels pilotes, les proprio ?

Oui.

La première fois les nouveaux pilotes ATI étaient pas sortit je m'étais un peu fais chier pour les installer ainsi que pour regler le xorg.conf via fgldxconfig, pis après j'ai installer les nouveaux qui m'ont foutu la merde dans le xorg.conf au niveau des résolutions (j'ai appris a utiliser le modeline grace a ça ^^) et puis là je viens de les reinstaller à nouveau pour le nouveau kernel. (heuresement que c'est torché en 2-3 commandes avec les nouveaux pilotes )

[/hs]

ZeBob

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

le post de gégé peut aider à la fin
http://forum.ubuntu-fr.org/viewtopic.php?id=4308

(euh faut que tu te renseignes sur xinerama avant (si ce n'est déjà fait)

ce post intéressant aussi : http://forum.ubuntu-fr.org/viewtopic.php?id=8841

Dernière modification par ZeBob (Le 27/08/2005, à 12:24)

StK

Re : [Résolu]Erreur lors de l'activation de la configuration XKB.

Merci pour ton aide.

J'ai tester de configurer a partir d'un HOWTO sur xinerama mais ça a pas marcher, donc j'ai remanier mon xorg.conf à la sauce des exemples de xorg.conf fonctionnels que j'ai trouvé sur le forum, j'ai fini par y arriver mais j'ai un petit problème d'affichage a résoudre.