Ubuntu-fr

Clement33185

[Résolu] Encore Beryl ^^ plante au démarrage

Bonjour!
Voila, jviens d'installer Beryl avant hier tout marche parfait (jviens de changer d'ordi) j'ai les driver Nvidia. Puis au redémarrage, Beryl se lance (jusque la normal ^^) je peux tourner le cube en cliquant sur les différents bureau, mais dès que je clic sur une fenetre ou le menu K ca plante. Seul Alt + Ctrl + Backspace marche (la 1ere fois qu'il plante, apres c'est redémarrage).
Voici mon xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Oct 16 22:13:07 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Philips 170C"
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NVIDIA Default Card"
    Driver         "nvidia"
    Option         "AddARGBGLXVisuals" "true"
    Option         "TripleBuffer" "true"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NVIDIA Default Card"
    Monitor        "Philips 170C"
    DefaultDepth    24
    Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

Voila j'espere avoir un peu d'aide . Merci d'avance

Dernière modification par Clement33185 (Le 31/01/2007, à 19:02)

blacksad44

Re : [Résolu] Encore Beryl ^^ plante au démarrage

si tu as les derniers drivers nvidia il semble qu'il faut aussi copier ça dans le section screen

Option         "AddARGBGLXVisuals" "true"
    Option         "TripleBuffer" "true"
EndSection

et desactive la syncro verticale avec l'utilitaire de configue nvidia désolé pas sur mon pc j'ai un trou pour le nom c'est dans application systeme nvidia x setting

regarde aussi ton autostart sous kde

---

l'encyclopédie du libre :
http://www.linuxpedia.fr

Clement33185

Re : [Résolu] Encore Beryl ^^ plante au démarrage

Ces options sont a mettre mais dans la section Device. Cependant, j'ai trouvé la source du problème, elle provenait de l'option "Effet de flou" dans "Visual Effects". Je ne vois pas du tout pourquoi mais étant donner que je ne remarque pas de différence avec ou sans l'option (si ce n'est que sur cette ordinateur l'option fait planter), le problème est réglé. Merci quand meme pour ta réponse blacksad44

Dernière modification par Clement33185 (Le 31/01/2007, à 19:01)