Pages : 1
#1 Le 12/01/2007, à 16:09
- Jip
dual view nvidia
bonjour,
Savez-vous s'il est possible de faire, réellement, du dual view entre mon ecran de pc (1600x1200) et ma télé (800x600) avec ma carte nvidia geforce4mx 440 ? Et comment faire ça ?
Je faisais ça sous windows, j'imagine que cela est possible sous ubuntu 6.10 !
Pour le moment je ne suis arrivé qu'à definir mon second ecran (tv composite) en clone et il me faut modifier la résolution (mettre les 2 ecrans en 800x600) avant de basculer sur deux ecran. C'est dommage parce que si quelqu'un chez moi veut voir un divx, je ne peux pas bosser ....
J'utilise les drivers nvidia 9626 le 9629 est bogué parait-il.
Merci bocou 
voici mon xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Oct 16 22:13:07 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "Extentions"
# Option "Composite" "Enable"
#EndSection
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dbe"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "B_106055"
Option "DPMS"
EndSection
Section "Device"
#Option "RenderAccel" "true"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Driver "nvidia"
#BusID "PCI:1:0:0"
BusID "PCI:3:0:0"
Option "NvAGP" "1"
Option "AddARGBGLXVisuals" "true" # pour beryl
Option "TripleBuffer" "true" # pour beryl
# ajout pour le mode clone TV
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
#Option "TVOutFormat" "SVIDEO"
Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-B"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "ConnectedMonitor" "CRT,TV"
Option "MetaModes" "1600x1200, NULL; 800x600,800x600;"
# fin ajout pour le mode clone TV
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Monitor "B_106055"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionHors ligne
#2 Le 16/01/2007, à 01:16
- csmith
Re : dual view nvidia
Même question, avec une GeForce2 MX/MX 400, je souhaite utiliser la sortie S-video pour me connecter sur ma télé pour regarder mes videos, cela fonctionnait sous XP.
Ci joint mon xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
## This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "LM-1702"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "LM-1702"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionEdit : Utilise les balises [ Code ] quand tu colles du texte (long), merci.
Pour cette fois, je modifie.
Dernière modification par michel2652 (Le 16/01/2007, à 02:58)
Hors ligne
#3 Le 16/01/2007, à 15:45
- Mifrey
Re : dual view nvidia
Hi,
Pour deux moniteurs et un X screen (même bureau sur les deux moniteurs) : http://doc.ubuntu-fr.org/materiel/nvidia_tvout
Pour deux moniteurs et deux X screen (un bureau différent sur chaque moniteur) : http://doc.ubuntu-fr.org/materiel/nvidia_tvout#methode_alternative_sans_twinview
Hors ligne
#4 Le 16/01/2007, à 16:04
- david breizh
Re : dual view nvidia
et bien moi j'ai fait quatre xorg différents, un pour le crt en 1280x1024, le deuxieme pour la tv en 1024x768, un troisieme pour les deux en même temps mais deux sorties differentes l'un en 1280x1024 et la tv en 1024x768 et enfin mon préféré avec les deux en même temps mais étendu sur un seul avec le crt en 1280x1024 et la tv en 1024x768 (il marche tous avec beryl), je vous les colle si ça peut vous aidez mais il faudra l'adapter avec vos spéc.:
crt:
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Fujitsu"
ModelName "CRT-0"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
BusID "PCI:3:0:0"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1280x1024_60 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSectiontv:
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "daewoo"
ModelName "TV-0"
HorizSync 30.0 - 54.0
VertRefresh 50.0 - 90.0
Option "DPMS"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-B"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
BusID "PCI:3:0:0"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "TV: 1024x768 +0+0; TV: 800x600 +0+0; TV: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection2 séparer:
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "daewoo"
ModelName "TV-0"
HorizSync 30.0 - 54.0
VertRefresh 50.0 - 90.0
Option "DPMS"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-B"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Fujitsu"
ModelName "CRT-0"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
BusID "PCI:3:0:0"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
BusID "PCI:3:0:0"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
Screen 1
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard0"
Monitor "Monitor1"
DefaultDepth 24
Option "metamodes" "TV: 1024x768 +0+0; TV: 800x600 +0+0; TV: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard1"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1280x1024_60 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSectionle dernier étendu sur les deux:
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Fujitsu"
ModelName "CRT-0"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-B"
Option "metamodes" "CRT: 1280x1024 +0+0, TV: 1024x768 +1280+0; CRT: 1024x768_85 +0+0, TV: 1024x768 +1024+0; CRT: 800x600 +0+0, TV: nvidia-auto-select +800+0; CRT: 640x480 +0+0, TV: nvidia-auto-select +640+0"
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSectionvoilà si ça peut vous aider, à plus.pour les taux de rafraichissement je les ai trouvé dans le xconfig de nvidia et bien vérifier après dans system >preferences>resolution d'ecran que c'est sur la bonne et redémarer le serveur x crt+alt+retour.
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#5 Le 16/01/2007, à 17:07
- csmith
Re : dual view nvidia
J'ai fait la même chose, j'ai créer 2 xorg différents.
En fait, j'ai un peu contourné les problèmes. Je souhaitais juste pouvoir visionner mes videos sur ma télé
mais j'ai vu qu'il n'était pas possible en clone d'avoir 2 résolutions différentes.
http://forum.ubuntu-fr.org/viewtopic.php?id=89030
Donc j'ai créer un xorg, avec une déclaration Twinview "true" et Option "TVOutFormat" "SVIDEO", je passe ensuite en 800*600 sur mon ecran LDC du pc et je charge le nouvel Xorg.
Ensuite pour travailler son mon PC, je repasse le xorg par défaut et ma résolution en 1024x768. Et voila.
Merci à David Breizh qui m'a permis de résoudre "mon" problème.
PS: je verrais plus tard pour 2 bureaux différents.
Hors ligne
#6 Le 16/01/2007, à 20:17
- david breizh
Re : dual view nvidia
avec le twinview je regarde la tele en 1024 et je travail sur le crt en 1280 avec beryl donc tu peux avoir la tele pour regarder les films et travailler sur ton lcd de l'autre
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#7 Le 17/01/2007, à 00:51
- tof162
Re : dual view nvidia
salut a tous...
etant aussi en train de me battre pour faire marcher ma tele (qui fonctionne tres bien sous win) et ayant copie la moitie (non, non, j exagere pas...) des fichier xorg dualview de la terre sur mon pc... toujours rien qui marche
un bel ecran bleu me disant que xorg fonctionne pas
pourtant ma config n est pas des plus bizarres (gt6600 et ubuntu 6.06)
la question que je me pose est qu en fait ma sortie n'est pâs une svideo classique mais une rgb 9 pin qui se met en svideo grace a un adaptateur (peut etre que ca n a rien a voir mais bon...)
je suis a l ecoute de vos conseils...
(au fait, comment ce fait-ce qu il n existe pas d utilitaire en mode graphique réglant cela ( genre les drivers nvidia qui le font sous win) qui est quand meme moins dangereux que de chipoter comme un zouave dans ses fichier xorg???)
#8 Le 24/01/2007, à 14:00
- Jip
Re : dual view nvidia
Merci à david breizh pour son dernier xorg.conf dont je me suis inspiré .
Marche en 1600x1200 sur mon crt et 1024x768 sur la tv
Le seul hic, c'est Beryl qui déconne un peu mais bon .... pô grave !
mon xorg s'il peut en inspirer d'autre (ma sortie tv est en composite)
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Oct 16 22:13:07 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dbe"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "B_106055"
Option "DPMS"
EndSection
Section "Device"
#Option "RenderAccel" "true"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Driver "nvidia"
BusID "PCI:3:0:0"
Option "NvAGP" "1"
Option "AddARGBGLXVisuals" "true" # pour beryl
Option "TripleBuffer" "true" # pour beryl
# ajout pour le mode dual view
Option "ConnectedMonitor" "CRT,TV"
Option "TwinView" "true"
#Option "TVOutFormat" "SVIDEO"
Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-B"
Option "metamodes" "CRT: 1600x1200 +0+0, TV: 1024x768 +1600+0;"
# fin ajout pour le mode dual view
# debut ajout pour le mode clone TV
#Option "TwinView" "true"
#Option "TwinViewOrientation" "Clone"
#Option "TVOutFormat" "COMPOSITE"
#Option "TVStandard" "PAL-B"
#Option "SecondMonitorHorizSync" "30-50"
#Option "SecondMonitorVertRefresh" "60"
#Option "ConnectedMonitor" "CRT,TV"
#Option "MetaModes" "1600x1200, NULL; 800x600,800x600;"
# fin ajout pour le mode clone TV
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Monitor "B_106055"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionHors ligne
#9 Le 26/04/2007, à 13:51
- csmith
Re : dual view nvidia
Je reviens sur ce sujet, je n'ai jamais réussi sous edgy à avoir, 2 résolutions différentes.
Aujourd'hui, j'ai migré vers Feisty, mais pas mieux quelqu'un peut il m'aider ???
Je souhaite pouvoir travailler sur mon PC, pendant que d'autres regardent la télé via mon PC (un divX par exemple).
Merci de votre aide.
Hors ligne
Pages : 1