A l'aide !!! Installation ATI radeon X1900GT

Gregogo · Le 13/01/2007, à 12:53

Bonjour

Je desespere, deux jours que j'essaie de l'installé

J'ai essayer le tutorial de ce site mais ca ne fonctionne pas, puis l'installation via le site constructeur mais c toujours pas ca ....

Voila ou j'en suis :
Si je fais le test :

$ fgl_glxgears

j'obtiens :

Using GLX_SGIX_pbuffer
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  155 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  30
  Current serial number in output stream:  30

Si je tape :

$ fglrxinfo
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)

Enfin :

$ sudo aticonfig --initial
Parse error on line 472 of section Device in file xorg.conf
        Unexpected EOF. Missing EndSection keyword?

Voici mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
        Load    "dbe"
        SubSection "extmod"
            Option "omit xfree86-dga"
        EndSubSection
        Load "record"
        Load "v4l"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. ATI Default Card"
	Driver		"vesa"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"L194WT"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. ATI Default Card"
	Monitor		"L194WT"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1440x1440" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "Extensions"
	Option "Composite" "Disable"
EndSection

Merci d'avance pour l'aide .

A bientot

Dernière modification par Gregogo (Le 15/01/2007, à 16:30)

fredolerouge · Le 13/01/2007, à 13:38

salut,

si j'ai bien lu, tu utilises le driver "vesa". Or il te faut soit les drivers libres "radeon" ou "ati", soit le driver proprio "fglrx".

dans la section "serveurs graphiques et cartes video", tu trouveras ton bonheur pour installer l'accelération matérielle de ta carte.

Sinon, tu as ce qu'il faut ici:
http://doc.ubuntu-fr.org/materiel

bon courage et @+

Gregogo · Le 15/01/2007, à 00:03

Merci fredolerouge

J'avance doucement, j'ai remplacé vesa par fglrx mais j'ai toujours le probleme suivant :

$ fglrxinfo
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)

$ fgl_glxgears
Using GLX_SGIX_pbuffer
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  156 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  30
  Current serial number in output stream:  30

pourtant j'ai bien les lignes

Section "Extensions"
	Option "Composite" "Disable"
EndSection

dans mon xorg
Si tu peux m'aider a resoudre...

Gregogo · Le 15/01/2007, à 01:04

Encore moi !!!
c'est bon, synaptic a fini tout seul l'insatllation apres plusieurs mise a jour

 fgl_glxgears
Using GLX_SGIX_pbuffer
7806 frames in 5.0 seconds = 1561.200 FPS
9321 frames in 5.0 seconds = 1864.200 FPS
9054 frames in 5.0 seconds = 1810.800 FPS
9124 frames in 5.0 seconds = 1824.800 FPS
9829 frames in 5.0 seconds = 1965.800 FPS
9834 frames in 5.0 seconds = 1966.800 FPS

merci

Gregogo · Le 15/01/2007, à 16:29

Ma joie était trop precipité, j'ai encore besoin d'aide !!!
En effet, l'acceleration graphique marchait correctement, mais la résolution de l'ecran n'était pas optimale, j'ai donc rentré les valeur de mon ecran dans le xorg :

Section "Monitor"
Identifier "LG Flatron Wide"
Option "DPMS"
HorizSync 56-75
VertRefresh 30-66
EndSection

J'ai donc eu la resolution nominal de l'ecran : 1440x900 mais depuis impossible d'avoir l'acceleration 3D :

$ fgl_glxgears
Using GLX_SGIX_pbuffer
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  141 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  30
  Current serial number in output stream:  30

Et si je rajoute les lignes :

Section "Extensions"
	Option "Composite" "disable"
EndSection

un ecran noir apparait apres l'ecran de demarage unbuntu avec la barre de défilement ...

Quelqu'un peut il m'aider ?

Pour info voici mon xorg :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
#       Load    "extmod"
        SubSection "extmod"
           Option    "omit xfree86-dga"
        EndSubSection
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"latin9"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI X1900GT"
	Driver		"fglrx"
	BusID		"PCI:1:0:0"
	VideoRam	256000
EndSection

Section "Monitor"
	Identifier	"LG Flatron Wide"
	Option		"DPMS"
	HorizSync	56-75
	VertRefresh	30-66
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI X1900GT"
	Monitor		"LG Flatron Wide"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 13/01/2007, à 12:53

A l'aide !!! Installation ATI radeon X1900GT

#2 Le 13/01/2007, à 13:38

Re : A l'aide !!! Installation ATI radeon X1900GT

#3 Le 15/01/2007, à 00:03

Re : A l'aide !!! Installation ATI radeon X1900GT

#4 Le 15/01/2007, à 01:04

Re : A l'aide !!! Installation ATI radeon X1900GT

#5 Le 15/01/2007, à 16:29

Re : A l'aide !!! Installation ATI radeon X1900GT

Pied de page des forums