#1 Le 14/12/2006, à 11:40
- didli
[Résolu] Nvidia 9631 / Twinview Clone
Salut à tous !
Je me bats avec mon xorg.conf depuis une semaine (et c'est lui qui gagne grr!) pour avoir un twinview en clone avec 2 CRT, en 1280x1024 chacun. Pas moyen d'y arriver, même avec l'utilitaire nvidia. Du coup j'ai désespérement besoin de votre aide, alors si vous pouvez jetez un oeil à ma config et m'en dire plus .... Merci d'avance !
Le xorg.conf en l'état actuel (je suis passé par une batterie de configuration entre temps, je ne sais plus où donner de la tête):
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
#Load “GLcore”
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "IIyamaHM903/DT"
HorizSync 30.0 - 75.0
VertRefresh 50.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Quadro FX 1100"
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1280x1024,1280x1024;1280x960,1280x960;1024x768,1024x768;800x600,800x600;640x480,640x480"
Driver "nvidia"
BusID "1:5:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Quadro FX 1100"
Monitor "IIyamaHM903/DT"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionDernière modification par didli (Le 14/12/2006, à 12:45)
Plan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#2 Le 14/12/2006, à 12:44
- didli
Re : [Résolu] Nvidia 9631 / Twinview Clone
En suivant ce tuto, je suis parvenu à un résultat assez satisfaisant : 1280x1024 sur les 2 CRT, avec les panneaux de xubuntu visibles uniquement sur le premier CRT (ça, ça me plaît).
[edit : je suis ensuite passé à un vrai mode clone en ajoutant Option "TwinViewOrientation" "Clone"]
Seul souci, mais c'est un moindre mal, le fond d'écran s'étire même si je choisis de ne pas le faire dans le gestionnaire de paramètres du bureau de xfce.
[edit : Résolu après redémarrage)
Je passe donc en [Résolu] et je vous mets le nouveau xorg :
Section "ServerLayout"
Identifier "TwinView Configuration"
Screen 0 "Default Screen" 0 0
Option "Xinerama" "Off"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
#Load “GLcore”
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "IIyamaHM903/DT"
HorizSync 30.0 - 75.0
VertRefresh 50.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV36GL [Quadro FX 1100]"
VendorName "PNY Nvidia"
BoardName "Quadro FX 1100"
Option "NvAGP" "2"
Option "NoLogo" "1"
Option "RenderAccel" "1"
Option "CursorShadow" "1"
Option "Coolbits" "1"
Option "ConnectedMonitor" "crt, crt"
Option "NoPowerConnectorCheck"
Option "TwinView" "1"
Option "TwinViewOrientation" "Clone"
Option "Metamodes" "1280x1024,1280x1024; 1280x1024,NULL; 1280x960,1280x960; 1152x864,1152x864; 800x600,800x600; 1024x768,1024x768; 1280x1024,NULL; 1024x768,NULL"
Option "SecondMonitorHorizSync" "31-82"
Option "SecondMonitorVertRefresh" "56-76"
Driver "nvidia"
BusID "1:5:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV36GL [Quadro FX 1100]"
Monitor "IIyamaHM903/DT"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionDernière modification par didli (Le 19/12/2006, à 02:16)
Plan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#3 Le 26/12/2006, à 22:31
- GeDeon35
Re : [Résolu] Nvidia 9631 / Twinview Clone
va voir ici => http://doc.ubuntu-fr.org/materiel/multi-ecran?s=twinview
Hors ligne