- Accueil
- » Forum
- » Archives
- » Résolu: cdrecord
Pages : 1
#1 Le 12/08/2005, à 09:05
- jjb
Résolu: cdrecord
Où trouver une version de cdrecord compatible avec Linux-2.6.10-5-386.
GnomeBaker émet des messages d'erreur à l'effacement d'un CD-RW.
-------------
cdrecord: Warning: Running on Linux-2.6.10-5-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Error trying to open /dev/hdc exclusively (Device or resource busy)... retrying in 1 second.
Linux sg driver version: 3.5.27
cdrecord: Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an unofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'ubuntu-0.8ubuntu1'.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TDK '
Identifikation : 'DVDRW0404N '
Revision : '1.0A'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/Rx96R RAW/R96R
Drive buf size : 1345536 = 1314 KB
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
A3 values: 04 C4 80
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
Dernière modification par jjb (Le 12/08/2005, à 14:24)
Hors ligne
#2 Le 12/08/2005, à 11:53
- jrev
Re : Résolu: cdrecord
C'est un bug ?
Mal nommer les choses, c'est ajouter au malheur du monde
Hors ligne
#3 Le 12/08/2005, à 12:58
- jjb
Re : Résolu: cdrecord
C'est un bug ?
---------------
Le message d'erreur dit "There are unsettled issues with Linux-2.5 and newer" ce qui signifie que cdrecord n'est pas compatible avec les versions >= Linux 2.5.
Dernière modification par jjb (Le 12/08/2005, à 13:54)
Hors ligne
#4 Le 12/08/2005, à 13:11
- jjb
Re : Résolu: cdrecord
Ubuntu ne semble pas avoir les versions les plus récentes de gnomebaker et cdrecord.
J'ai trouvé gnomebaker 0.4.1 dans Debian unstable et 0.3.3 dans Debian stable alors que la version Ubuntu est 0.3.3.
De même cdrecord est à l'indice 4:2.0 +a38 dans Ubuntu et 4:2.01+01a01-2 dans Debian stable et 4:2.01+01a01-4 dans Debian unstable.
Peux-t-on installer ces nouvelles version sans problèmes?
Hors ligne
Pages : 1