Ubuntu-fr

clem75

ATI X300 et Ubuntu

Bonsoir a tous,
J'ai telecharger Ubuntu et je lai installer ! j'en suis vraiment tres content a part un petit bemol sur le fait que je ne peux pas afficher une resolution superieur a 1024*748 et bon ca fait un peu moche ! Jai un peu lu sur le forum les problemes similaires mais des que je modifi le xorg.conf et que je relance le serveur X il me dit que ce dernier ne peut plus se lancer et jai plus acces a rien ! donc je suis oblige de reinstaller XD

Voila mon xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Voilou ! et donc des que je modifi sa plante. jai essayer d'ajouter 1200*1024 a depth 24 dans les modes mais sa a tout casser donc je n'y touche plus pour le moment

J'ai une ATI X300 et un ecran LG flatron L1721b

Merci beaucoup

slasher_fun

Re : ATI X300 et Ubuntu

Bé 1200*1024 n'est pas une résolution standard, c'est 1280*1024 qu'il faut utiliser...

---

Je fais partie des cinq gus dans un garage qui font des mails à la chaîne

clem75

Re : ATI X300 et Ubuntu

A oui en effet mais tu es sur que sa va pas faire planter mon serveur X ?
Je met a la place de:

SubSection "Display"
        Depth        24
        Modes        "1024x768" "800x600" "640x480"
    EndSubSection

SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection

did

Re : ATI X300 et Ubuntu

Bonsoir,

Au pire si ton serveur plante, pas besoin de tout reinstaller, tu reconfigures juste ton serveur X

sudo dpkg-reconfigure xserver-xorg

Ou tu rétablis un sauvegarde de ton ancien fichier.
Pour le sauvegarder :

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup

Pour le rétablir :

sudo cp /etc/X11/xorg.conf.backup /etc/X11/xorg.conf

Ou simplement tu l'édites et tu modifies le paramètre qui coince

sudo nano /etx/X11/xorg.cong

(Ctrl+X pour enregistrer et sortir de nano)