#1 Le 04/12/2006, à 11:37
- JLGARIOUD
[Résolu] Résolution 1280x1024 - xorg.conf
Bonjour,
je souhaiterais passer en 1280x1024.
Ce choix n'apparait pas dans le menu graphique "résolution de l'écran"
Je n'ai pas de fichier xorg.conf
mais un /etc/X11/XF86Config-4, mais ça n'a pas l'air d'être lui qui est lu!
voila le contenu
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "v4l"
Load "vbe"
Load "xtt"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Intel Corporation 82815 CGC [Chipset Graphics Controller]"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "SDM-S81"
HorizSync 28-65
VertRefresh 48-65
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82815 CGC [Chipset Graphics Controller]"
Monitor "SDM-S81"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
Dernière modification par JLGARIOUD (Le 05/12/2006, à 14:55)
Hors ligne
#2 Le 04/12/2006, à 11:54
- geantick
Re : [Résolu] Résolution 1280x1024 - xorg.conf
salut
dans cette zone:
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
ajoute "1280x1024"
pour obtenir ceci:
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
car par defaut ce sont les définitions en 24 bits qui sont prisent en compte quand on lit ton fichier.
et sinon quel est le model de ta carte graphique?
soit A=B , si l'on ajoute A de chaque cotés => 2A=B+A , on soustrait 2B de chaque coté => 2A-2B=A-B <=> 2(A-B)=1(A-B)
en simplifiant 2=1 ! et voilà. Mais 0/0 çà fait combien?
Hors ligne
#3 Le 04/12/2006, à 11:55
- michel2652
Re : [Résolu] Résolution 1280x1024 - xorg.conf
Bonjour,
Pour ta CG intel, est que 915resolution ? ? http://doc.ubuntu-fr.org/materiel/intel … ntel_i915g
A+
#4 Le 04/12/2006, à 13:35
- JLGARIOUD
Re : [Résolu] Résolution 1280x1024 - xorg.conf
C'est OK
Je ne sais pas comment inscrire [résolu]
Hors ligne