Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 18/11/2006, à 12:45

Dafette

[Résolu]Install ati propriétaire pour ati 1900GT

Bonjour, je suis nouveau sur Ubuntu et linux et çà fait 2 semaine que je découvre edgy et je trouve çà vraiment bien.
Bon par contre j'ai encore des pb car je n'arrive pas utiliser l'accélération 3D. En effet moi j'ai installé edgy sur ma machine normale pas sur une "épave". Je dis pas que mon matéiel est au top mais dans le wki et le forum je lis beaucoup de références à de l'AGP et des Ati 9600.
Donc mon ma config c'est un AMD64 3000+ socket 754 et une ati 1900GT sur Pci-e donc.

Je suis donc l'instal des drivers propriétaires. La 2d marche bien mais pas la 3d et au niveau vidéo c'est pas excellent.

En fait je suis déjà à ma 3ème réinstal complète d'edgy car comme je butais sur ce problème et bien j'ai continuer de lire sur le forum les solutions proposées pour activer la 3d donc. Les 2 dernières fois cela m'a conduis à reconfigurer le server-X comme le propose Sly dans le How to. Et bien à chaque fois, le reboot qui a suivi a été un plantage sur le splach screen d'ubuntu à la fin du chargement. Impossible de restaurer par le safe mode car je suis pas encore assez bon pour çà.

Voilà un peu où j'en suis. J'ai bien une vieille carte ati et nvdia qui traine mais j'aimerais bien utiliser les capacités de ma 1900GT. Et puis çà me permettrais de convertir quelques windowsiens. Mais c'est vrai que la reconfig du X-server ne me rassure pas.

Je vous recopie le contenu de mon fichier xorg.conf pour info. Ce qui est bizarre, me semble-t-il, c'est que j'ai 2 sections device. Vous en pensez-quoi ?

Merci de votre aide smile

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "BenQ T90X"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. ATI Default Card"
	Driver      "vesa"
	BusID       "PCI:5:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. ATI Default Card"
	Monitor    "BenQ T90X"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

#2 Le 18/11/2006, à 15:20

zanoni

Re : [Résolu]Install ati propriétaire pour ati 1900GT

Bonjour,

Aucun problème les 2 section device, c'est la commande : 

$ sudo aticonfig --initial

qui crée la 2ème section.

Par contre, je ne vois pas de :

Section "Extensions"
	Option "Composite" "disable"
EndSection

Est-ce que tu as regardé le fichier /etc/modules. Il faut qu'il y est 

fglrx

Pour cela :

gksudo gedit /etc/modules

Si tu as toujours des problèmes, il serait intéressant de poster le résultats des commandes :

grep EE /var/log/Xorg.0.log
grep WW /var/log/Xorg.0.log

Bon courage.

Hors ligne

#3 Le 18/11/2006, à 15:44

Dafette

Re : [Résolu]Install ati propriétaire pour ati 1900GT

Salut Zanoni smile et merci de tes réponses !
J'ai ajouté Option "Composite" "disable"
Voici mon xorg.conf (je l'ai postionnné en dernier çà ne pose pas de pb ?)

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "BenQ T90X"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. ATI Default Card"
	Driver      "vesa"
	BusID       "PCI:5:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. ATI Default Card"
	Monitor    "BenQ T90X"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
    Option "Composite" "disable"
EndSection

Voici mon gksudo gedit /etc/modules

fglrx
lp
sbp2

Et maintenant voici le résultat des 2 commandes que tu as demandé :

nico@nico-desktop:~$ grep EE /var/log/Xorg.0.log
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) fglrx(0): DRIScreenInit failed!
(EE) AIGLX: Screen 0 is not DRI capable
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
nico@nico-desktop:~$

Et la seconde :

nico@nico-desktop:~$ grep WW /var/log/Xorg.0.log
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(WW) fglrx(0): Failed to open DRM connection
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(WW) fglrx(0): Failed to set up write-combining range (0xee000000,0x1fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xec000000,0x3fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xe8000000,0x7fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xe0000000,0xffe0000)
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
nico@nico-desktop:~$

Merci du temps que tu me consacres ! wink

#4 Le 19/11/2006, à 15:52

zanoni

Re : [Résolu]Install ati propriétaire pour ati 1900GT

De rien pour l'aide. J'essaie de partager lesquels connaissances que j'ai.

Pas de problème, quant à la place du l'option composite.

Au vue des Warnings dans ton fichier xorg0.log, il y a un problème de module DRI.

Dans la page http://doc.ubuntu-fr.org/materiel/ati, tu as une section à propos des problèmes liés au module DRI : http://doc.ubuntu-fr.org/materiel/ati#dri_ou_acceleration_3d

Je te copie mon xorg.conf pour infio :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Ecran[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
EndSection

Section "Files"
	FontPath     "/usr/share/fonts/X11/misc"
	#FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	#FontPath     "/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	#Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "Buttons" "7"
	Option	    "ZAxisMapping" "4 5"
	Option	    "ButtonMapping" "1 2 3 6 7"
EndSection

Section "Monitor"
	Identifier  "HM903DADTA"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon R350 NH [Radeon 9800 Pro]"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
	Option	    "MaxGARTSize" "64"
	Option      "UseInternalAGPGART" "no"
	Option      "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	Option 	    "DRI" "true"
	#Option      "AccelMethod" "EXA"
EndSection

Section "Screen"
	Identifier "Ecran[0]"
	Device     "ATI Technologies, Inc. Radeon R350 NH [Radeon 9800 Pro]"
	Monitor    "HM903DADTA"
	DefaultDepth     24
		SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1280x1024"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option "Composite" "false"
	#Option "Composite" "disable"
EndSection

Section "ServerFlags"
	Option "AIGLX" "off"
EndSection

A+

Hors ligne

#5 Le 22/11/2006, à 20:37

Dafette

Re : [Résolu]Install ati propriétaire pour ati 1900GT

Salut zanoni big_smile
Bon ben je sais pas ce qui fait que çà marche désormais, mais bon çà marche !
Donc merci à toi wink
Je pense que c'est suite à un reboot ...
bref voici mon xorg.conf

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "BenQ T90X"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. ATI Default Card"
	Driver      "vesa"
	BusID       "PCI:5:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "DesktopSetup" "single"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. ATI Default Card"
	Monitor    "BenQ T90X"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
    Option "Composite" "disable"
EndSection

Tchao et MERCI zanoni big_smile

#6 Le 23/11/2006, à 17:00

zanoni

Re : [Résolu]Install ati propriétaire pour ati 1900GT

Tu peux mettre résolu dans le sujet du premier poste. Merci.

Hors ligne

Pages : 1