Pages : 1
#1 Le 11/11/2006, à 18:26
- sinapa
Nvidia9629 / beryl
bonsoir,
je reviens vers vous concernant beryl quand je le lance
j'ai ça qui s'affiche dans la console.
beryl: Couldn't bind redirected window 0x10001bd to texture
beryl: pixmap 0x2e000b4 can't be bound to texture
beryl: Couldn't bind redirected window 0x10001e9 to texture
beryl: pixmap 0x2e000b2 can't be bound to texture
beryl: Couldn't bind redirected window 0x10001bd to texture
beryl: pixmap 0x2e000b4 can't be bound to texture
beryl: Couldn't bind redirected window 0x10001e9 to texture
beryl: pixmap 0x2e000b2 can't be bound to texture
beryl: Couldn't bind redirected window 0x10001bd to texture
beryl: pixmap 0x2e000b4 can't be bound to texture
beryl: Couldn't bind redirected window 0x10001e9 to texturesans arrêt.
beryl semble marcher quand même.
j'ai les NVIDIA-Linux-x86-1.0-9629-pkg1.run
et beryl
Package: beryl
Version: 0.1.1-0ubuntu1
Architecture: i386
je n'ai que deux options dans xorg.conf
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
une idée, merci
Pierre
Hors ligne
#2 Le 13/11/2006, à 00:19
- BenP
Re : Nvidia9629 / beryl
Salut,
Même problème sur une gentoo avec compiz et sur les deux dernier drivers nvidia les 9626 et 9629.
Cela semblerait être la cause de l'abandon d'Xgl...
Quoique je me souviens avoir pu profiter des effets sur les 9626 et beryl y à quelques temps?
Si cela peux te rassurer on n'est pas seul sur le net;)
@+
Ben
#3 Le 13/11/2006, à 00:25
- Geoffrey
Re : Nvidia9629 / beryl
Si beryl marche bien je vois pas le pb
Hors ligne
#4 Le 13/11/2006, à 00:46
- BenP
Re : Nvidia9629 / beryl
Geoffrey a écrit :
Si beryl marche bien je vois pas le pb
Le problème dans mon cas viens du fait que Xorg en profite pour bouffer 50% du cpu en idle, qu'il plante parfois mon serveur X et surtout, qu'il m'empêche de lancer mon décorator...
En effet il n'a y que peu de "pb".
#5 Le 13/11/2006, à 10:58
- sinapa
Re : Nvidia9629 / beryl
Geoffrey a écrit :
Si beryl marche bien je vois pas le pb
ce que je voulais dire que les effets fonctionnent, mais qu'une application remplie la console de messages d'erreurs n'est sûrement pas un comportement normal. D'ailleurs j'ai constaté depuis des plantages aléatoires ainsi que de l'occupation de cpu.
Hors ligne
#6 Le 13/11/2006, à 11:01
- mathieu vilaplana
Re : Nvidia9629 / beryl
Ou as tu mis c option, il faut aussi le renderacceler, enfin montre ton xorg.conf
===========================================
Ubuntu Lover
Hors ligne
#7 Le 13/11/2006, à 18:52
- sinapa
Re : Nvidia9629 / beryl
Voilà mon xorg
tux@pierre:~$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Carte vid�o g�n�riquelosj"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-82
VertRefresh 56-76
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vid�o g�n�riquelosj"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionHors ligne
#8 Le 01/02/2007, à 20:20
- cacolac
Re : Nvidia9629 / beryl
J'ai exactement le même problème sur edgy
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "B102035W"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV20 [GeForce3 Ti 200]"
Driver "nvidia"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV20 [GeForce3 Ti 200]"
Monitor "B102035W"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionEffet collatéral j'ai certaines applis que je ne peux fermer avec la croix.
Une solution ?
Pages : 1