Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 11/11/2006, à 11:26

trasmontano

Beryl + Edgy + ATI lenteurs [résolu]

Bonjour,
Je viens de mettre à jour de dapper vers Edgy, j'utilisais XGL avec succès sur Dapper.
Après mise à jour j'ai refais la même configuration car j'utilise les pilotes propriétaire (car j'ai une ATI mobility X300)
Tout semble fonctionner, beryl se lance, j'ai bien toutes lec fonctionnalités de beryl (cubes, effets, ....)

Le problème est que j'ai de grosses lenteurs parfois, surtout quand je veux taper du texte ça devient très très lent, ensuite lorsque je clique quelque part il me faut plusieurs secondes parfois pour avoir une réaction.

Avez vous une idée, ou une methode pour trouver d'ou viendrai le problème, lorsque j'observe les processus tout semble normal.

Dernière modification par trasmontano (Le 18/11/2006, à 09:37)

Hors ligne

#2 Le 12/11/2006, à 14:59

trasmontano

Re : Beryl + Edgy + ATI lenteurs [résolu]

Une idée ? Une piste ?

Hors ligne

#3 Le 14/11/2006, à 11:53

Vlad

Re : Beryl + Edgy + ATI lenteurs [résolu]

Yep,

Pas de solutions mais juste que j'ai le même problème (avec Beryl, Edgy, ATI, fglrx).
En gros chez moi tout fonctionne bien, et au bout de 5min par exemple, tout devient extrèmement lent (genre 5 secondes montre en main avant que le cube tourne, 3 secondes pour lancer un term, etc...)

Et comme dit au dessus, activité CPU normale.
La seule erreur rencontrée est un bug d'emerald au démarrage, je suis souvent obligé de le killer et de relancer beryl pour que ça tourne.

En session normale pas de problème.

Dernière modification par Vlad (Le 14/11/2006, à 11:54)

Vladounette

Hors ligne

#4 Le 14/11/2006, à 18:34

trasmontano

Re : Beryl + Edgy + ATI lenteurs [résolu]

Merci pour ta réponse Vlad, pour faire avancé le problème, un tout petit peu, j'arrive à avoir une session 100 % opérationnelle quand je redémarre X puis la fois suivante c'est à nouveau extrêmement lent.
J'ai pu remarquer dans mon Xorg.log que j'ai une erreur AIXGL, étrange j'utilise pourtant XGL avec les pilotes propriétaires.
J'ai cru comprendre que c'était les pilotes libres qui utilisent AIXGL, j'ai donc fais le ménage, mais toujours pareil... étrange...

Hors ligne

#5 Le 15/11/2006, à 08:44

trasmontano

Re : Beryl + Edgy + ATI lenteurs [résolu]

Je poursuis mes investigations, en fait ma session xgl est normale quand je lance d'abord une session gnome, puis je lance ma session xgl.
Je comprend pas, quesqui pourrait être lancer à se moment? quel pourrait être la différence?

Hors ligne

#6 Le 15/11/2006, à 12:03

gar

Re : Beryl + Edgy + ATI lenteurs [résolu]

pourrait tu poster ton xorg.conf et ton fichier log de xorg ?

" C'est pas parce qu'ils sont des millions à avoir tort qu'ils ont raison " .coluche
non mais ho! 
le blog du Gar[ouf]

Hors ligne

#7 Le 15/11/2006, à 16:08

trasmontano

Re : Beryl + Edgy + ATI lenteurs [résolu]

Le Log

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686 
Current Operating System: Linux costadaprata 2.6.17-10-386 #2 Fri Oct 13 18:41:40 UTC 2006 i686
Build Date: 07 July 2006
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 15 08:18:19 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]"
(**) |   |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/X11/fonts/misc,
	/usr/share/X11/fonts/100dpi/:unscaled,
	/usr/share/X11/fonts/75dpi/:unscaled,
	/usr/share/X11/fonts/Type1,
	/usr/share/X11/fonts/100dpi,
	/usr/share/X11/fonts/75dpi,
	/usr/share/fonts/X11/misc,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	/usr/share/fonts/X11/misc/,
	/usr/share/fonts/X11/TTF/,
	/usr/share/fonts/X11/OTF,
	/usr/share/fonts/X11/Type1/,
	/usr/share/fonts/X11/CID/,
	/usr/share/fonts/X11/100dpi/,
	/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.0
	X.Org XInput driver : 0.6
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,0186 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,0186 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,0186 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,0186 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,0186 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,0186 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1028,0186 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 14f1,5423 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,0186 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1028,0186 rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1028,0186 rev 03 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,3150 card 1028,2002 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 14e4,1677 card 1028,0186 rev 01 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 104c,8036 card 2000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 03:01:5: chip 104c,8038 card 1028,0186 rev 00 class 07,80,00 hdr 80
(II) PCI: 03:03:0: chip 8086,4220 card 8086,2722 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xdfd00000 - 0xdfefffff (0x200000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xdfc00000 - 0xdfcfffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,7), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
	[0] -1	0	0x00002000 - 0x00002fff (0x1000) IX[b]
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0xdfb00000 - 0xdfbfffff (0x100000) MX[b]
(II) Bus 3 prefetchable memory range:
	[0] -1	0	0x50000000 - 0x51ffffff (0x2000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 4 I/O range:
	[0] -1	0	0x00002000 - 0x000020ff (0x100) IX[b]
	[1] -1	0	0x00002400 - 0x000024ff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
	[0] -1	0	0x50000000 - 0x51ffffff (0x2000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc M24 1P [Radeon Mobility X600] rev 0, Mem @ 0xd0000000/27, 0xdfdf0000/16, I/O @ 0xde00/8, BIOS @ 0xdfe00000/17
(II) Addressable bus resource ranges are
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.1.1, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.30.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) ATI Radeon/FireGL: The following chipsets are supported:
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.30.3
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.30g1                           
(II) ATI Proprietary Linux Driver Build Date: Oct 26 2006 08:05:19
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.30.1.1.2.3-driver-lnx-x86-x86_64-302518
(--) Assigning device section with no busID to primary device
(--) Chipset MOBILITY RADEON X600 (M24 3150) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xdfbff000 - 0xdfbfffff (0x1000) MX[b]
	[5] -1	0	0xdfbfe000 - 0xdfbfefff (0x1000) MX[b]
	[6] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[b]
	[7] -1	0	0xdfcf0000 - 0xdfcfffff (0x10000) MX[b]
	[8] -1	0	0xdffffd00 - 0xdffffdff (0x100) MX[b]
	[9] -1	0	0xdffffe00 - 0xdfffffff (0x200) MX[b]
	[10] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[b]
	[11] -1	0	0xdfe00000 - 0xdfe1ffff (0x20000) MX[b](B)
	[12] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
	[13] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[16] -1	0	0x000010c0 - 0x000010df (0x20) IX[b]
	[17] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
	[18] -1	0	0x00000374 - 0x00000374 (0x1) IX[b]
	[19] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[20] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[21] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[22] -1	0	0x0000ec80 - 0x0000ecff (0x80) IX[b]
	[23] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[b]
	[24] -1	0	0x0000ec40 - 0x0000ec7f (0x40) IX[b]
	[25] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[b]
	[26] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[b]
	[27] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[b]
	[28] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[b]
	[29] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[b]
	[30] -1	0	0x0000de00 - 0x0000deff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e17c8
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xdfbff000 - 0xdfbfffff (0x1000) MX[b]
	[5] -1	0	0xdfbfe000 - 0xdfbfefff (0x1000) MX[b]
	[6] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[b]
	[7] -1	0	0xdfcf0000 - 0xdfcfffff (0x10000) MX[b]
	[8] -1	0	0xdffffd00 - 0xdffffdff (0x100) MX[b]
	[9] -1	0	0xdffffe00 - 0xdfffffff (0x200) MX[b]
	[10] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[b]
	[11] -1	0	0xdfe00000 - 0xdfe1ffff (0x20000) MX[b](B)
	[12] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
	[13] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[19] -1	0	0x000010c0 - 0x000010df (0x20) IX[b]
	[20] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
	[21] -1	0	0x00000374 - 0x00000374 (0x1) IX[b]
	[22] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[23] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[25] -1	0	0x0000ec80 - 0x0000ecff (0x80) IX[b]
	[26] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[b]
	[27] -1	0	0x0000ec40 - 0x0000ec7f (0x40) IX[b]
	[28] -1	0	0x0000ed00 - 0x0000edff (0x100) IX[b]
	[29] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[b]
	[30] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[b]
	[31] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[b]
	[32] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[b]
	[33] -1	0	0x0000de00 - 0x0000deff (0x100) IX[b](B)
	[34] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[35] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY RADEON X600 (M24 3150)" (Chipset = 0x3150)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x2002)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xdfdf0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131008 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON (M24)  
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: P24 
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.30.3
	ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0):  Display1: No EDID information from DDC.
(II) fglrx(0): Derived EDID from BIOS and internal tables for Display1:
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MS_  Model: 0  Serial#: 0
(II) fglrx(0): Year: 1990  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40  vert.: 30
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.000 redY: 0.000   greenX: 0.000 greenY: 0.000
(II) fglrx(0): blueX: 0.000 blueY: 0.000   whiteX: 0.000 whiteY: 0.000
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 60  vid: 16453
(II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 60  vid: 16481
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 71.1 MHz   Image Size:  0 x 0 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3.  5 power states available:
(II) fglrx(0):   1. 398/263MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 100/122MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep]
(II) fglrx(0):   3. 105/182MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep, thermal diode mode]
(II) fglrx(0):   4. 209/182MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep]
(II) fglrx(0):   5. 209/182MHz @ 60Hz [low voltage, low panel refresh rate, enable sleep, thermal diode mode]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 11 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"   71.11  1280 1328 1360 1440  800 802 808 823
(**) fglrx(0): *Mode "1280x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"   71.11  1280 1328 1360 1440  768 786 792 823
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   71.11  1024 1200 1232 1440  768 786 792 823
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   71.11  800 1088 1120 1440  600 702 708 823
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   71.11  640 1008 1040 1440  480 642 648 823
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   71.11  640 1008 1040 1440  400 602 608 823
(**) fglrx(0):  Default mode "640x350": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"   71.11  640 1008 1040 1440  350 577 583 823
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   71.11  512 944 976 1440  384 594 600 823
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   71.11  400 888 920 1440  300 702 708 823 doublescan
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   71.11  320 848 880 1440  240 642 648 823 doublescan
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   71.11  320 848 880 1440  200 602 608 823 doublescan
(--) fglrx(0): Display dimensions: (400, 300) mm
(--) fglrx(0): DPI set to (81, 67)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"   71.11  1280 1328 1360 1440  800 802 808 823
(**) fglrx(0): *Mode "1280x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"   71.11  1280 1328 1360 1440  768 786 792 823
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   71.11  1024 1200 1232 1440  768 786 792 823
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   71.11  800 1088 1120 1440  600 702 708 823
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   71.11  640 1008 1040 1440  480 642 648 823
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   71.11  640 1008 1040 1440  400 602 608 823
(**) fglrx(0):  Default mode "640x350": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"   71.11  640 1008 1040 1440  350 577 583 823
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   71.11  512 944 976 1440  384 594 600 823
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   71.11  400 888 920 1440  300 702 708 823 doublescan
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   71.11  320 848 880 1440  240 642 648 823 doublescan
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   71.11  320 848 880 1440  200 602 608 823 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:

(II) fglrx(0): UMM Bus area: 0xd05e9000 (size=0x079f7000)
(II) fglrx(0): UMM area:     0xd05e9000 (size=0x079f7000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x35000
(II) fglrx(0): [drm] mapped SAREA 0x35000 to 0xb734d000
(II) fglrx(0): [drm] framebuffer handle = 0x36000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.30.3
(II) fglrx(0):     Date: Oct 26 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.17-10-386
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00037000
(II) fglrx(0): [pcie] 131072 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0x0003b000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x005e9000
(II) fglrx(0): Splitting WC range: base: 0xd0000000, size: 0x5e9000
(II) fglrx(0): Splitting WC range: base: 0xd0400000, size: 0x1e9000
(II) fglrx(0): Splitting WC range: base: 0xd0500000, size: 0xe9000
(II) fglrx(0): Splitting WC range: base: 0xd0580000, size: 0x69000
(II) fglrx(0): Splitting WC range: base: 0xd05c0000, size: 0x29000
(II) fglrx(0): Splitting WC range: base: 0xd05e0000, size: 0x9000
(==) fglrx(0): Write-combining range (0xd05e8000,0x1000)
(==) fglrx(0): Write-combining range (0xd05e0000,0x9000)
(==) fglrx(0): Write-combining range (0xd05c0000,0x29000)
(==) fglrx(0): Write-combining range (0xd0580000,0x69000)
(==) fglrx(0): Write-combining range (0xd0500000,0xe9000)
(==) fglrx(0): Write-combining range (0xd0400000,0x1e9000)
(==) fglrx(0): Write-combining range (0xd0000000,0x5e9000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): Interrupt handler installed at IRQ 169.
(II) fglrx(0): Exposed events to the /proc interface
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
    xkb_keycodes             { include "xfree86+aliases(azerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+fr+level3(ralt_switch)" };
    xkb_geometry             { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
    xkb_types                { include "%" };
    xkb_compatibility        { include "%" };
    xkb_symbols              { include "%" };
    xkb_geometry             { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x35000 at 0xb734d000
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
(II) fglrx(0): UMM Bus area: 0xd05e9000 (size=0x079f7000)
(II) fglrx(0): UMM area:     0xd05e9000 (size=0x079f7000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x94000
(II) fglrx(0): [drm] mapped SAREA 0x94000 to 0xb734d000
(II) fglrx(0): [drm] framebuffer handle = 0x95000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.30.3
(II) fglrx(0):     Date: Oct 26 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.17-10-386
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00096000
(II) fglrx(0): [pcie] 131072 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0x0009a000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x005e9000
(II) fglrx(0): Splitting WC range: base: 0xd0000000, size: 0x5e9000
(II) fglrx(0): Splitting WC range: base: 0xd0400000, size: 0x1e9000
(II) fglrx(0): Splitting WC range: base: 0xd0500000, size: 0xe9000
(II) fglrx(0): Splitting WC range: base: 0xd0580000, size: 0x69000
(II) fglrx(0): Splitting WC range: base: 0xd05c0000, size: 0x29000
(II) fglrx(0): Splitting WC range: base: 0xd05e0000, size: 0x9000
(==) fglrx(0): Write-combining range (0xd05e8000,0x1000)
(==) fglrx(0): Write-combining range (0xd05e0000,0x9000)
(==) fglrx(0): Write-combining range (0xd05c0000,0x29000)
(==) fglrx(0): Write-combining range (0xd0580000,0x69000)
(==) fglrx(0): Write-combining range (0xd0500000,0xe9000)
(==) fglrx(0): Write-combining range (0xd0400000,0x1e9000)
(==) fglrx(0): Write-combining range (0xd0000000,0x5e9000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(II) fglrx(0): Interrupt handler installed at IRQ 169.
(II) fglrx(0): Exposed events to the /proc interface
(==) RandR enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
    xkb_keycodes             { include "xfree86+aliases(azerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+fr+level3(ralt_switch)" };
    xkb_geometry             { include "pc(pc105)" };
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
    xkb_types                { include "%" };
    xkb_compatibility        { include "%" };
    xkb_symbols              { include "%" };
    xkb_geometry             { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x94000 at 0xb734d000
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
(II) fglrx(0): UMM Bus area: 0xd05e9000 (size=0x079f7000)
(II) fglrx(0): UMM area:     0xd05e9000 (size=0x079f7000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) fglrx(0): doing DRIScreenInit
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x107000
(II) fglrx(0): [drm] mapped SAREA 0x107000 to 0xb734d000
(II) fglrx(0): [drm] framebuffer handle = 0x108000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.30.3
(II) fglrx(0):     Date: Oct 26 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.17-10-386
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00109000
(II) fglrx(0): [pcie] 131072 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0x0010d000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x005e9000
(II) fglrx(0): Splitting WC range: base: 0xd0000000, size: 0x5e9000
(II) fglrx(0): Splitting WC range: base: 0xd0400000, size: 0x1e9000
(II) fglrx(0): Splitting WC range: base: 0xd0500000, size: 0xe9000
(II) fglrx(0): Splitting WC range: base: 0xd0580000, size: 0x69000
(II) fglrx(0): Splitting WC range: base: 0xd05c0000, size: 0x29000
(II) fglrx(0): Splitting WC range: base: 0xd05e0000, size: 0x9000
(==) fglrx(0): Write-combining range (0xd05e8000,0x1000)
(==) fglrx(0): Write-combining range (0xd05e0000,0x9000)
(==) fglrx(0): Write-combining range (0xd05c0000,0x29000)
(==) fglrx(0): Write-combining range (0xd0580000,0x69000)
(==) fglrx(0): Write-combining range (0xd0500000,0xe9000)
(==) fglrx(0): Write-combining range (0xd0400000,0x1e9000)
(==) fglrx(0): Write-combining range (0xd0000000,0x5e9000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(II) fglrx(0): Interrupt handler installed at IRQ 169.
(II) fglrx(0): Exposed events to the /proc interface
(==) RandR enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
    xkb_keycodes             { include "xfree86+aliases(azerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+fr+level3(ralt_switch)" };
    xkb_geometry             { include "pc(pc105)" };
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
    xkb_types                { include "%" };
    xkb_compatibility        { include "%" };
    xkb_symbols              { include "%" };
    xkb_geometry             { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x107000 at 0xb734d000
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
(II) fglrx(0): UMM Bus area: 0xd05e9000 (size=0x079f7000)
(II) fglrx(0): UMM area:     0xd05e9000 (size=0x079f7000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x291000
(II) fglrx(0): [drm] mapped SAREA 0x291000 to 0xb734d000
(II) fglrx(0): [drm] framebuffer handle = 0x292000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.30.3
(II) fglrx(0):     Date: Oct 26 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.17-10-386
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00293000
(II) fglrx(0): [pcie] 131072 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0x00297000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x005e9000
(II) fglrx(0): Splitting WC range: base: 0xd0000000, size: 0x5e9000
(II) fglrx(0): Splitting WC range: base: 0xd0400000, size: 0x1e9000
(II) fglrx(0): Splitting WC range: base: 0xd0500000, size: 0xe9000
(II) fglrx(0): Splitting WC range: base: 0xd0580000, size: 0x69000
(II) fglrx(0): Splitting WC range: base: 0xd05c0000, size: 0x29000
(II) fglrx(0): Splitting WC range: base: 0xd05e0000, size: 0x9000
(==) fglrx(0): Write-combining range (0xd05e8000,0x1000)
(==) fglrx(0): Write-combining range (0xd05e0000,0x9000)
(==) fglrx(0): Write-combining range (0xd05c0000,0x29000)
(==) fglrx(0): Write-combining range (0xd0580000,0x69000)
(==) fglrx(0): Write-combining range (0xd0500000,0xe9000)
(==) fglrx(0): Write-combining range (0xd0400000,0x1e9000)
(==) fglrx(0): Write-combining range (0xd0000000,0x5e9000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(II) fglrx(0): Interrupt handler installed at IRQ 169.
(II) fglrx(0): Exposed events to the /proc interface
(==) RandR enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
    xkb_keycodes             { include "xfree86+aliases(azerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+fr+level3(ralt_switch)" };
    xkb_geometry             { include "pc(pc105)" };
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : Invalid argument
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
    xkb_types                { include "%" };
    xkb_compatibility        { include "%" };
    xkb_symbols              { include "%" };
    xkb_geometry             { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm

La conf:

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

    # path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	HorizSync    28.0 - 64.0
	VertRefresh  43.0 - 60.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
  ##<-----------------------------------
	Identifier  "ATI Technologies, Inc. M22 [Radeon Mobility M300]"
	Driver      "ati"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. M22 [Radeon Mobility M300]"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x800"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSection

Merci

Hors ligne

#8 Le 15/11/2006, à 18:00

gar

Re : Beryl + Edgy + ATI lenteurs [résolu]

la ligne suivante de ton log xorg me semble louche :

(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering

il semble que l'acceleration 3D ne fonctionne pas correctement .
la section device de ton xorg .conf est mauvaise

pour generer un xor.conf propre :

sudo dpkg-reconfigure xserver-xorg

Dernière modification par gar (Le 15/11/2006, à 18:05)

" C'est pas parce qu'ils sont des millions à avoir tort qu'ils ont raison " .coluche
non mais ho! 
le blog du Gar[ouf]

Hors ligne

#9 Le 18/11/2006, à 09:36

trasmontano

Re : Beryl + Edgy + ATI lenteurs [résolu]

Merci en effet il y avait un problème avec mon xorg.conf
Cela était dus a aticonfig --initial
qui a ajouter des sections (device, monitor, ...) il demmarai un coup sur deux sur le pilote ati.
je vous copie mon xorg pour info

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

    # path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

#Section "Monitor"
#	Identifier   "Generic Monitor"
#	HorizSync    28.0 - 64.0
#	VertRefresh  43.0 - 60.0
#	Option	    "DPMS"
#EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

#Section "Device"
  ##<-----------------------------------
#	Identifier  "ATI Technologies, Inc. M22 [Radeon Mobility M300]"
#	Driver      "ati"
#	BusID       "PCI:1:0:0"
#EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

#Section "Screen"
#	Identifier "Default Screen"
#	Device     "ATI Technologies, Inc. M22 [Radeon Mobility M300]"
#	Monitor    "Generic Monitor"
#	DefaultDepth     24
#	SubSection "Display"
#		Depth     1
#		Modes    "1280x800"
#	EndSubSection
#	SubSection "Display"
#		Depth     4
#		Modes    "1280x800"
#	EndSubSection
#	SubSection "Display"
#		Depth     8
#		Modes    "1280x800"
#	EndSubSection
#	SubSection "Display"
#		Depth     15
#		Modes    "1280x800"
#	EndSubSection
#	SubSection "Display"
#		Depth     16
#		Modes    "1280x800"
#	EndSubSection
#	SubSection "Display"
#		Depth     24
#		Modes    "1280x800"
#	EndSubSection
#EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSection

Hors ligne

Pages : 1