#1 Le 01/11/2006, à 11:29
- vulcanoo
Probléme affichage graphique matrox sous edgy
Bonjour voici 4 jours que je bidouille sous edgy en essayant de parvenir à un affichage correct sous edgy.
Ma config:
carte graphique matrox g200
ecran view sonic E651
ci dessous mon xorg.conf
-------------------------------------------------------------------------------------------------------------------
001. # /etc/X11/xorg.conf (xorg X Window System server configuration file)
002. #
003. # This file was generated by dexconf, the Debian X Configuration tool, using
004. # values from the debconf database.
005. #
006. # Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
007. # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
008. #
009. # This file is automatically updated on xserver-xorg package upgrades *only*
010. # if it has not been modified since the last upgrade of the xserver-xorg
011. # package.
012. #
013. # If you have edited this file but would like it to be automatically updated
014. # again, run the following command:
015. # sudo dpkg-reconfigure -phigh xserver-xorg
016.
017. Section "Files"
018. FontPath "/usr/share/X11/fonts/misc"
019. FontPath "/usr/share/X11/fonts/cyrillic"
020. FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
021. FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
022. FontPath "/usr/share/X11/fonts/Type1"
023. FontPath "/usr/share/X11/fonts/100dpi"
024. FontPath "/usr/share/X11/fonts/75dpi"
025. FontPath "/usr/share/fonts/X11/misc"
026. # path to defoma fonts
027. FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
028. EndSection
029.
030. Section "Module"
031. Load "bitmap"
032. Load "ddc"
033. Load "dri"
034. Load "extmod"
035. Load "freetype"
036. Load "glx"
037. Load "int10"
038. Load "type1"
039. Load "vbe"
040. EndSection
041.
042. Section "InputDevice"
043. Identifier "Generic Keyboard"
044. Driver "kbd"
045. Option "CoreKeyboard"
046. Option "XkbRules" "xorg"
047. Option "XkbModel" "pc105"
048. Option "XkbLayout" "fr"
049. Option "XkbOptions" "lv3:ralt_switch"
050. EndSection
051.
052. Section "InputDevice"
053. Identifier "Configured Mouse"
054. Driver "mouse"
055. Option "CorePointer"
056. Option "Device" "/dev/input/mice"
057. Option "Protocol" "ExplorerPS/2"
058. Option "ZAxisMapping" "4 5"
059. Option "Emulate3Buttons" "true"
060. EndSection
061.
062. Section "InputDevice"
063. Driver "wacom"
064. Identifier "stylus"
065. Option "Device" "/dev/wacom" # Change to
066. # /dev/input/event
067. # for USB
068. Option "Type" "stylus"
069. Option "ForceDevice" "ISDV4" # Tablet PC ONLY
070. EndSection
071.
072. Section "InputDevice"
073. Driver "wacom"
074. Identifier "eraser"
075. Option "Device" "/dev/wacom" # Change to
076. # /dev/input/event
077. # for USB
078. Option "Type" "eraser"
079. Option "ForceDevice" "ISDV4" # Tablet PC ONLY
080. EndSection
081.
082. Section "InputDevice"
083. Driver "wacom"
084. Identifier "cursor"
085. Option "Device" "/dev/wacom" # Change to
086. # /dev/input/event
087. # for USB
088. Option "Type" "cursor"
089. Option "ForceDevice" "ISDV4" # Tablet PC ONLY
090. EndSection
091.
092. Section "Device"
093. Identifier "Matrox Graphics, Inc. MGA G200 AGP"
094. Driver "mga"
095. BusID "PCI:1:0:0"
096. VideoRam 8000
097. Option "OldDmaInit" "True"
098. EndSection
099.
100. Section "Monitor"
101. Identifier "E651-3"
102. Option "DPMS"
103. HorizSync 30-56
104. VertRefresh 60-120
105. EndSection
106.
107. Section "Screen"
108. Identifier "Default Screen"
109. Device "Matrox Graphics, Inc. MGA G200 AGP"
110. Monitor "E651-3"
111. DefaultDepth 16
112. SubSection "Display"
113. Depth 1
114. Modes "1024x768" "800x600" "640x480"
115. EndSubSection
116. SubSection "Display"
117. Depth 4
118. Modes "1024x768" "800x600" "640x480"
119. EndSubSection
120. SubSection "Display"
121. Depth 8
122. Modes "1024x768" "800x600" "640x480"
123. EndSubSection
124. SubSection "Display"
125. Depth 15
126. Modes "1024x768" "800x600" "640x480"
127. EndSubSection
128. SubSection "Display"
129. Depth 16
130. Modes "1024x768" "800x600" "640x480"
131. EndSubSection
132. SubSection "Display"
133. Depth 24
134. Modes "1024x768" "800x600" "640x480"
135. EndSubSection
136. EndSection
137.
138. Section "ServerLayout"
139. Identifier "Default Layout"
140. Screen "Default Screen"
141. InputDevice "Generic Keyboard"
142. InputDevice "Configured Mouse"
143. InputDevice "stylus" "SendCoreEvents"
144. InputDevice "cursor" "SendCoreEvents"
145. InputDevice "eraser" "SendCoreEvents"
146. EndSection
147.
148. Section "DRI"
149. Mode 0666
150. EndSection
151.
--------------------------------------------------------------------------------------------------------------------------------
Mon problème:
- au boot d'ubuntu j'ai un écran noir.Je n'ai pas le logo de démarrage ubuntu.
- puis jai l'interface graphique de connexion gdm
- ensuite gnome se lance MAIS avec une résolution 1024 X 728 et une frequence de 70 hz qui n'est pas convenable car ca fait mal au yeux (flicker).
- je vais dans systeme/preference/resolution et la lits box me propose 87 hz pour 1024X728.Je choisis donc 87 hz et je fais appliquer. Et là jai un écran noir qui me dit dpms standby.Et plus de gnome.
J'appuis sur touche espace et je reviens en resolution initiale 1024X768 70 hz.
Ma question: comment sélectionner une fréquence de 87 hz (puisqu'elle m'est proposée)?
Est ce un problème de carte matrox?
Je précise que mon écran accepte jusqu'à 120 hz
Hors ligne
#2 Le 01/11/2006, à 14:20
- Mc Doul
Re : Probléme affichage graphique matrox sous edgy
Sortie vidéo
Résolution maxi (externe) 1920 x 1200 / 70 Hz
http://www.ciao.fr/Informationproduit/Matrox_G200__361796
Même si ton écran supporte le 120hz, la carte graphique ne peut pas envoyer plus que du 70hz.
[Edit] Concernant ton problème de usplash, lis ce sujet : http://forum.ubuntu-fr.org/viewtopic.php?id=71011
Dernière modification par Mc Doul (Le 01/11/2006, à 14:22)
Hors ligne
#3 Le 01/11/2006, à 14:24
- vulcanoo
Re : Probléme affichage graphique matrox sous edgy
Mac Doul....Merci..je n'avais meme pas penser à la carte!!!!
MAis je vais jeter un cou d'oeil sous xp...pour voir la fréquence sous XP
Hors ligne