Pages : 1
#1 Le 26/10/2006, à 18:41
- Rifleman
Accélération 3D - Drivers libres
Salut tout le monde.
Je demande encore de l'aide (en espérant trouver une réponse cette fois ci). J'ai installé Edgy à sa sortie, en espérant que l'accélération 3D fonctionnerait sur celle-ci. Je me suis tourné vers les drivers libres, et j'ai donc édité mon xorg.conf. Le voici :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AR [Radeon 9600 XT]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "AGPMode" "8" # AGP 8x
Option "AGPSize" "128" # AGP aperture size
Option "RingSize" "8"
Option "BufferSize" "2"
Option "UseFBDev" "false"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "XaaNoOffscreenPixmaps" "false" # Faster RENDER acceleration
Option "RenderAccel" "true" # Enable the hardware render acceleration
# Option "BackingStore" "true" # chez moi ça laisse des traces dans le menu, vous pouvez essayer de l'activer # Faster double buffering
Option "EnablePageFlip" "true" # Enable page flipping for 3D apps
Option "ColorTiling" "true"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "AL1716"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AR [Radeon 9600 XT]"
Monitor "AL1716"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectionAucune erreur au démarrage.
Seulement voila : quand je fais glxinfo, j'obtiens :
direct rendering: NoMa CG est une ATI Radeon 9600PRO, donc compatible avec ces drivers libres.
Aidez-moi s'il vous plait, je commence sérieusement à désespérer...
Merci de vos réponses,
Rifleman.
PS :
rifleman@rifleman:~$ glxgears -printfps
1427 frames in 5.0 seconds = 283.412 FPS
1596 frames in 5.3 seconds = 303.709 FPS
1596 frames in 5.2 seconds = 304.699 FPS
Dernière modification par Rifleman (Le 26/10/2006, à 18:44)
Hors ligne
#2 Le 26/10/2006, à 18:52
- Rifleman
Re : Accélération 3D - Drivers libres
A oui, quand je redémarre, au lieu d'avoir le logo Kubuntu (sous Edgy), mon écran se met en veille et j'ai plus rien. pourtant l'ordinateur semble toujours allumé.
Hors ligne
#3 Le 26/10/2006, à 18:58
- Stemp
Re : Accélération 3D - Drivers libres
Regarde les messages d'erreurs et d'avertissements dans le fichier /var/log/Xorg.0.log
Pour afficher les messages d'erreurs :
cat /var/log/Xorg.0.log | grep EE«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#4 Le 26/10/2006, à 19:01
- Rifleman
Re : Accélération 3D - Drivers libres
Voila ce que ça donne :
rifleman@rifleman:~$ cat /var/log/Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
(EE) AIGLX: Screen 0 is not DRI capable
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
Hors ligne
#5 Le 26/10/2006, à 20:06
- Glouferu
Re : Accélération 3D - Drivers libres
J'ai le même probleme que toi ! J'ai une ATI Radeon 9800 Pro ...
(EE) AIGLX: Screen 0 is not DRI capable
#6 Le 26/10/2006, à 20:09
- Stemp
Re : Accélération 3D - Drivers libres
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
C'est un problème d'agp pas de driver ati/radeon.
Regarde cette fois çi les erreurs dans dmesg :
dmesg | grep agp«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#7 Le 26/10/2006, à 20:46
- Rifleman
Re : Accélération 3D - Drivers libres
Cette commande me renvoie :
[17179588.040000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.044000] agpgart: Detected AGP bridge 0
[17179588.044000] agpgart: Setting up Nforce3 AGP.Il me semblait que ma carte était en PCI, mais j'y connais rien...
Hors ligne
#8 Le 26/10/2006, à 20:54
- Muscardingue
Re : Accélération 3D - Drivers libres
Pour la part, j'ai le même problème sauf que :
glxgears -printfps donne :
5193 frames in 5.0 seconds = 1034.692 FPS
5160 frames in 5.0 seconds = 1023.174 FPS
5160 frames in 5.0 seconds = 1022.678 FPS
5118 frames in 5.0 seconds = 1021.095 FPS
et que fglxinfo|grep rendering donne :
direct rendering: No
Voici mon /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "Extensions"
Option "RENDER" "Enable"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "be"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV280 [Radeon 9200 SE]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "AGPSize" "64" # default: 8
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "true"
Option "EnableDepthMoves" "true"
Option "RenderAccel" "true"
EndSection
Section "Monitor"
Identifier "Sampo Tech."
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV280 [Radeon 9200 SE]"
Monitor "Sampo Tech."
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSectioncat /var/log/Xorg.0.log | grep EE :
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
et dmesg | grep agp :
[17179586.776000] Linux agpgart interface v0.101 (c) Dave Jones
[17179586.788000] agpgart: Detected VIA PT800 chipset
[17179586.792000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179595.252000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179595.252000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179595.252000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Voila je sais pas ce que je dois faire.
Merci
Hors ligne
#9 Le 26/10/2006, à 21:05
- feb
Re : Accélération 3D - Drivers libres
Bonsoir moi je suis sous Edgy avec les drivers libres Radeon et une Radeon 9700Mobility sur un fujitsu AmiloM1425
glxgears -printfps
15894 frames in 5.0 seconds = 3178.704 FPS
15584 frames in 5.0 seconds = 3116.794 FPSet voilà mon /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "AGPMode" "4" # AGP 4x
Option "AGPSize" "128" # AGP aperture size
Option "RingSize" "8"
Option "BufferSize" "2"
Option "UseFBDev" "false"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "XaaNoOffscreenPixmaps" "false" # Faster RENDER acceleration
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "BackingStore" "true" # Faster double buffering
Option "EnablePageFlip" "true" # Enable page flipping for 3D apps
Option "ColorTiling" "true"
Option "SubPixelOrder" "none"
Option "DynamicClocks" "on"
Option "mtrr" "on"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800""1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800""1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800""1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800""1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800""1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionJ'ai suivi le tutorial sur le wiki du site et ça marche impeccable 
en espérant que ça peut vous aider
Dernière modification par feb (Le 26/10/2006, à 21:06)
FujitsuSiemens AmiloM1425 (Centrino1,6GHz-9700Mobility-Ubuntu 7.04)
Participez aux projets du WorldCommunityGrid avec la team FfR : http://projet-wcg.fr-bb.com
Plus d'infos et les tutoriels sur mon site : http://pagesperso-orange.fr/chezfeb/
Hors ligne
#10 Le 27/10/2006, à 10:11
- Rifleman
Re : Accélération 3D - Drivers libres
Vous avez pas de solution ?
Merci d'avance 
Hors ligne
#11 Le 27/10/2006, à 16:23
- Rifleman
Re : Accélération 3D - Drivers libres
Je suis passé aux drivers propriétaires... Mais même problème qu'avant : Mesa 3D.
J'ai plein de bugs au reboot (au lieu de voir l'écran Kubuntu, mon écran se met en veille et je dois éteindre mon PC à la barbare), quand je redimensionne glxgears ça me ramène au KDM... Je pense que je vais changer de distribution.
Hors ligne
#12 Le 27/10/2006, à 23:44
- Muscardingue
Re : Accélération 3D - Drivers libres
juste pr dire que j'ai reinstaller ubuntu et ca fonctionne maintenant
Hors ligne