#1 Le 19/10/2006, à 22:40
- awala
[Résolu] urgent : installer une carte tv sous dapper
bonsoir tout le monde
j'ai vraiment besoin d'aide.
aujourd'hui j'ai acheté une carte pinnacle PCTV hybrid pro pci et ca fais au moins 4 heures que j'essaie de l'installer
j'ai essayé tout les tutos sur ce site et sur google mais je n'arrive pas à avoir des chaines de tv ou de la tnt
j'ai installé les drivers em28xx et em2880-dev par exemple
je sèche totalement
je ne suis meme pas sur de savoir si ma carte tv est bien installée bref je suis dans le flou total
aidez moi en étant le plus précis possible s'il vous plait ...
ma configuration :
P4 2.4GHz
1 Go ram
ubuntu 6.06 mis à jour
xgl et beryl installés et marche super bien
nvidia 6600 GT DDRAM3
carte tv pinnacle hybrid pro pci
je vous remercie d'avance
awala
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#2 Le 20/10/2006, à 06:29
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
bonjour à tous je vous mets le résultat de lspci et lspci -n
lspci :
~$ lspci
0000:00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05)
0000:00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
0000:00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 05)
0000:00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 05)0000:00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 05)
0000:00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 05)0000:01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2)
0000:02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:0a.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d0)
0000:02:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
0000:02:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:02:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
lspci -n:
:~$ lspci -n
0000:00:00.0 0600: 8086:1a30 (rev 04)
0000:00:01.0 0604: 8086:1a31 (rev 04)
0000:00:1e.0 0604: 8086:244e (rev 05)
0000:00:1f.0 0601: 8086:2440 (rev 05)
0000:00:1f.1 0101: 8086:244b (rev 05)
0000:00:1f.2 0c03: 8086:2442 (rev 05)
0000:00:1f.3 0c05: 8086:2443 (rev 05)
0000:00:1f.4 0c03: 8086:2444 (rev 05)
0000:01:00.0 0300: 10de:00f1 (rev a2)
0000:02:09.0 0200: 10ec:8139 (rev 10)
0000:02:0a.0 0480: 1131:7133 (rev d0)
0000:02:0b.0 0401: 1102:0002 (rev 07)
0000:02:0b.1 0980: 1102:7002 (rev 07)
0000:02:0d.0 0401: 13f6:0111 (rev 10)
est-ce bon ou pas pour voir si ma carte tv est bien installée ?
merci bonne journée ...
awala
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#3 Le 20/10/2006, à 07:34
- kao_chen
Re : [Résolu] urgent : installer une carte tv sous dapper
Bon pour moi la liste du dessus c un peu du chinois.
Pour ma part j'ai une Hauppauge 1100, le meilleur moyen pour moi de savoir si elle est bien installé c'est de passer par kaffeine. Generalement Kaffeine te dit rapidement si il reconnait ta carte ou pas.
Si c'est le cas:
Vas dans DVB -> Configure DVB
Dans DVB device tu peux voir le nom de ta puce de decodage, ainsi que le Type,:Terrestre dans notre cas.
Dans les sources choisit ton emetteur, (fr-Paris pour moi)
Ok
Maintenant vas dans le menu DVB->Channel.
Normalement Search doit être sur l'emetteur choisit.
lance le scan avec Start Scan.
Ensuite dans la liste des chaines trouvé selectionne celle qui t'interrresse, et ckique sur Add Selected.
Maintenant tu peux retourner dans Kaffeine et cliquer sur le bouton Digital TV.
Si ce n'est pas le cas:
télécharge le live cd de Kubuntu Edgy Eft Release Candidate:
http://se.releases.ubuntu.com/kubuntu/6.10/
Kaffeine est inclu dessus
Il y a des chances que le noyau s'en sorte mieu avec ta carte.
Si ca fonctionne avec le live Cd tu pourras faire une mise à jour de Dapper en fin de semaine prochaines lors de la sortie officielle
Sinon Bonne chance
Hors ligne
#4 Le 20/10/2006, à 08:49
- david breizh
Re : [Résolu] urgent : installer une carte tv sous dapper
fais un dmesg pour voir un peu plus
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#5 Le 20/10/2006, à 09:52
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
bonjour
merci pour l'aide...
en ce qui concerne kaffeine j'ai l'icone dvb mais elle est grisée et je n'ai pas l'accès aux options
de plus je suis sur gnome donc je ne peux pas télécharger la mise à jour de kaffeine (merci pour l'info du live cd de kubuntu je vais essayer ce soir).mais c'est un live edgy eft et moi je suis sous dapper drake (y aura t il conflit ?)
pour dmesg je suis au boulot donc je posterai ce soir
merci
awala
Dernière modification par awala (Le 20/10/2006, à 09:55)
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#6 Le 20/10/2006, à 14:50
- david breizh
Re : [Résolu] urgent : installer une carte tv sous dapper
tape dmesg dans une console et colle ici car ta carte télé n'est pas installé si l'icone de kaffeine et grisé.
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#7 Le 20/10/2006, à 15:41
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
bonsoir à tous et toutes
voila ce que me donne le dmsg : (désolé pour la longueur du message)
:~$ dmesg
[17179569.184000] Linux version 2.6.15-27-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
[17179569.184000] BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262140
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32764 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS ) @ 0x000f5fc0
[17179569.184000] ACPI: RSDT (v001 ASUS P4B-M 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
[17179569.184000] ACPI: FADT (v001 ASUS P4B-M 0x42302e31 MSFT 0x31313031) @ 0x3fffc100
[17179569.184000] ACPI: BOOT (v001 ASUS P4B-M 0x42302e31 MSFT 0x31313031) @ 0x3fffc040
[17179569.184000] ACPI: MADT (v001 ASUS P4B-M 0x42302e31 MSFT 0x31313031) @ 0x3fffc080
[17179569.184000] ACPI: DSDT (v001 ASUS P4B-M 0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2422.060 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.660000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.660000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179571.716000] Memory: 1027260k/1048560k available (2115k kernel code, 20620k reserved, 595k data, 332k init, 131056k highmem)
[17179571.716000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.796000] Calibrating delay using timer specific routine.. 4848.99 BogoMIPS (lpj=9697990)
[17179571.796000] Security Framework v1.0.0 initialized
[17179571.796000] SELinux: Disabled at boot.
[17179571.796000] Mount-cache hash table entries: 512
[17179571.796000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179571.796000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179571.796000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179571.796000] CPU: L2 cache: 512K
[17179571.796000] CPU: Hyper-Threading is disabled
[17179571.796000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[17179571.796000] mtrr: v2.0 (20020519)
[17179571.796000] Enabling fast FPU save and restore... done.
[17179571.796000] Enabling unmasked SIMD FPU exception support... done.
[17179571.796000] Checking 'hlt' instruction... OK.
[17179571.812000] SMP alternatives: switching to UP code
[17179571.812000] checking if image is initramfs... it is
[17179572.424000] Freeing initrd memory: 6808k freed
[17179572.444000] ACPI: Looking for DSDT ... not found!
[17179572.444000] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
[17179572.444000] Total of 1 processors activated (4848.99 BogoMIPS).
[17179572.444000] ENABLING IO-APIC IRQs
[17179572.444000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.588000] Brought up 1 CPUs
[17179572.588000] NET: Registered protocol family 16
[17179572.588000] EISA bus registered
[17179572.588000] ACPI: bus type pci registered
[17179572.588000] PCI: PCI BIOS revision 2.10 entry at 0xf1110, last bus=2
[17179572.588000] PCI: Using configuration type 1
[17179572.588000] ACPI: Subsystem revision 20051216
[17179572.592000] ACPI: Interpreter enabled
[17179572.592000] ACPI: Using IOAPIC for interrupt routing
[17179572.592000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179572.592000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179572.592000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179572.592000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179572.592000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179572.592000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179572.592000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179572.592000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179572.592000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.592000] PCI: Probing PCI hardware (bus 00)
[17179572.592000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179572.596000] PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[17179572.596000] PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
[17179572.596000] PCI: Enabled i801 SMBus device
[17179572.596000] Boot video device is 0000:01:00.0
[17179572.596000] PCI: Transparent bridge - 0000:00:1e.0
[17179572.596000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.600000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179572.600000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[17179572.608000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.608000] pnp: PnP ACPI init
[17179572.612000] pnp: PnP ACPI: found 13 devices
[17179572.612000] PnPBIOS: Disabled by ACPI PNP
[17179572.612000] PCI: Using ACPI for IRQ routing
[17179572.612000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179572.620000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
[17179572.620000] pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved
[17179572.620000] pnp: 00:01: ioport range 0xec00-0xec3f has been reserved
[17179572.620000] pnp: 00:0c: ioport range 0x3f0-0x3f1 has been reserved
[17179572.620000] PCI: Bridge: 0000:00:01.0
[17179572.620000] IO window: disabled.
[17179572.620000] MEM window: dd000000-dfefffff
[17179572.620000] PREFETCH window: dff00000-f7ffffff
[17179572.620000] PCI: Bridge: 0000:00:1e.0
[17179572.620000] IO window: b000-dfff
[17179572.620000] MEM window: dc000000-dcffffff
[17179572.620000] PREFETCH window: disabled.
[17179572.620000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.620000] Simple Boot Flag at 0x3a set to 0x1
[17179572.620000] audit: initializing netlink socket (disabled)
[17179572.620000] audit(1161354927.616:1): initialized
[17179572.620000] highmem bounce pool size: 64 pages
[17179572.620000] VFS: Disk quotas dquot_6.5.1
[17179572.620000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.620000] Initializing Cryptographic API
[17179572.620000] io scheduler noop registered
[17179572.620000] io scheduler anticipatory registered
[17179572.620000] io scheduler deadline registered
[17179572.620000] io scheduler cfq registered
[17179572.624000] isapnp: Scanning for PnP cards...
[17179572.976000] isapnp: No Plug & Play device found
[17179572.996000] Real Time Clock Driver v1.12
[17179572.996000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179572.996000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179573.004000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.004000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.004000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179573.004000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.004000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.008000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.008000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.008000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.008000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.008000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.008000] mice: PS/2 mouse device common for all mice
[17179573.008000] EISA: Probing bus 0 at eisa.0
[17179573.008000] EISA: Detected 0 cards.
[17179573.008000] NET: Registered protocol family 2
[17179573.048000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.048000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.048000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[17179573.056000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179573.060000] TCP: Hash tables configured (established 262144 bind 65536)
[17179573.060000] TCP reno registered
[17179573.060000] TCP bic registered
[17179573.060000] NET: Registered protocol family 1
[17179573.060000] NET: Registered protocol family 8
[17179573.060000] NET: Registered protocol family 20
[17179573.060000] Using IPI No-Shortcut mode
[17179573.060000] ACPI wakeup devices:
[17179573.060000] PCI0 PCI1 PCI2 USB0 USB1
[17179573.060000] ACPI: (supports S0 S1 S4 S5)
[17179573.060000] Freeing unused kernel memory: 332k freed
[17179573.124000] vga16fb: initializing
[17179573.124000] vga16fb: mapped to 0xc00a0000
[17179573.532000] Console: switching to colour frame buffer device 80x25
[17179573.532000] fb0: VGA16 VGA frame buffer device
[17179574.700000] Capability LSM initialized
[17179575.976000] ICH2: IDE controller at PCI slot 0000:00:1f.1
[17179575.976000] ICH2: chipset revision 5
[17179575.976000] ICH2: not 100% native mode: will probe irqs later
[17179575.976000] ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
[17179575.976000] ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
[17179575.976000] Probing IDE interface ide0...
[17179576.268000] hda: Maxtor 4R080J0, ATA DISK drive
[17179576.944000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.964000] Probing IDE interface ide1...
[17179577.704000] hdc: BDV316B, ATAPI CD/DVD-ROM drive
[17179578.488000] hdd: CD-RW IDE3212, ATAPI CD/DVD-ROM drive
[17179578.548000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.560000] hda: max request size: 128KiB
[17179578.580000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179578.580000] hda: cache flushes supported
[17179578.580000] hda: hda1 hda2 < hda5 >
[17179578.620000] hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179578.620000] Uniform CD-ROM driver Revision: 3.20
[17179578.632000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179578.896000] usbcore: registered new driver usbfs
[17179578.900000] usbcore: registered new driver hub
[17179578.900000] USB Universal Host Controller Interface driver v2.3
[17179578.900000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 177
[17179578.900000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179578.900000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[17179578.904000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[17179578.904000] uhci_hcd 0000:00:1f.2: irq 177, io base 0x0000a400
[17179578.904000] hub 1-0:1.0: USB hub found
[17179578.904000] hub 1-0:1.0: 2 ports detected
[17179579.012000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 185
[17179579.012000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[17179579.012000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[17179579.012000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[17179579.012000] uhci_hcd 0000:00:1f.4: irq 185, io base 0x0000a000
[17179579.012000] hub 2-0:1.0: USB hub found
[17179579.012000] hub 2-0:1.0: 2 ports detected
[17179579.252000] Attempting manual resume
[17179579.252000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179579.280000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.280000] kjournald starting. Commit interval 5 seconds
[17179579.400000] hub 1-1:1.0: USB hub found
[17179579.400000] hub 1-1:1.0: 7 ports detected
[17179579.740000] usb 1-1.1: new low speed USB device using uhci_hcd and address 3
[17179580.116000] usb 1-1.2: new full speed USB device using uhci_hcd and address 4
[17179592.444000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179592.460000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179592.672000] hw_random: RNG not detected
[17179592.680000] Linux agpgart interface v0.101 (c) Dave Jones
[17179592.764000] nvidia: module license 'NVIDIA' taints kernel.
[17179592.772000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179592.772000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[17179592.816000] agpgart: Detected an Intel i845 Chipset.
[17179592.820000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179593.304000] Linux video capture interface: v1.00
[17179593.644000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 185
[17179593.824000] gameport: EMU10K1 is pci0000:02:0b.1/gameport0, io 0xd000, speed 932kHz
[17179593.836000] 8139too Fast Ethernet driver 0.9.27
[17179593.836000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 201
[17179593.840000] eth0: RealTek RTL8139 at 0xf89f6000, 00:c0:26:7a:78:f5, IRQ 201
[17179593.840000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179593.852000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179594.160000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179594.160000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 169
[17179594.160000] saa7133[0]: found at 0000:02:0a.0, rev: 208, irq: 169, latency: 32, mmio: 0xdc000000
[17179594.160000] saa7133[0]: subsystem: 11bd:002f, board: UNKNOWN/GENERIC [card=0,autodetected]
[17179594.160000] saa7133[0]: board init: gpio is 600e000
[17179594.220000] Floppy drive(s): fd0 is 1.44M
[17179594.240000] FDC 0 is a post-1991 82077
[17179594.252000] parport: PnPBIOS parport detected.
[17179594.252000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179594.264000] usbcore: registered new driver hiddev
[17179594.284000] input: Logitech USB Receiver as /class/input/input1
[17179594.284000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1f.2-1.1
[17179594.284000] usbcore: registered new driver usbhid
[17179594.284000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179594.312000] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179594.312000] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2d 86 65 ff ff
[17179594.312000] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a5 ff 21 00 c2
[17179594.312000] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 88 03 96 a6 15
[17179594.312000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: registered device video0 [v4l2]
[17179594.312000] saa7133[0]: registered device vbi0
[17179594.328000] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 201
[17179594.340000] saa7134 ALSA driver for DMA sound loaded
[17179594.340000] saa7133[0]/alsa: saa7133[0] at 0xdc000000 irq 169 registered as card -1
[17179594.508000] input: PC Speaker as /class/input/input2
[17179594.940000] ts: Compaq touchscreen protocol output
[17179595.172000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179595.996000] lp0: using parport0 (interrupt-driven).
[17179596.076000] em28xx v4l2 driver version 0.0.1 loaded
[17179596.080000] usbcore: registered new driver em28xx
[17179596.228000] NET: Registered protocol family 17
[17179596.260000] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[17179596.312000] /home/floury/v4l-dvb/v4l/mt2060-tuner.c: mt2060_module_init
[17179596.388000] Adding 1502036k swap on /dev/hda5. Priority:-1 extents:1 across:1502036k
[17179596.732000] EXT3 FS on hda1, internal journal
[17179596.952000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179596.952000] md: bitmap version 4.39
[17179597.704000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179598.216000] cdrom: open failed.
[17179598.920000] cdrom: open failed.
[17179598.936000] cdrom: open failed.
[17179600.040000] NET: Registered protocol family 10
[17179600.040000] lo: Disabled Privacy Extensions
[17179600.044000] IPv6 over IPv4 tunneling driver
[17179606.692000] ACPI: Power Button (FF) [PWRF]
[17179606.692000] ACPI: Power Button (CM) [PWRB]
[17179606.824000] ibm_acpi: ec object not found
[17179606.860000] pcc_acpi: loading...
[17179610.692000] eth0: no IPv6 routers present
[17179614.196000] NVRM: not using NVAGP, an AGPGART backend is loaded!
[17179615.628000] ppdev: user-space parallel port driver
[17179616.212000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179616.212000] apm: overridden by ACPI.
[17179626.760000] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
[17179628.376000] Bluetooth: Core ver 2.8
[17179628.376000] NET: Registered protocol family 31
[17179628.376000] Bluetooth: HCI device and connection manager initialized
[17179628.376000] Bluetooth: HCI socket layer initialized
[17179628.440000] Bluetooth: L2CAP ver 2.8
[17179628.440000] Bluetooth: L2CAP socket layer initialized
[17179628.448000] Bluetooth: RFCOMM socket layer initialized
[17179628.448000] Bluetooth: RFCOMM TTY layer initialized
[17179628.448000] Bluetooth: RFCOMM ver 1.7
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#8 Le 20/10/2006, à 15:55
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
voila ce que donne les commandes suivantes :
~$ ls /dev/dvb/*
ls: /dev/dvb/*: Aucun fichier ou répertoire de ce type
~$ dmesg | grep saa
[17179594.160000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179594.160000] saa7133[0]: found at 0000:02:0a.0, rev: 208, irq: 169, latency: 32, mmio: 0xdc000000
[17179594.160000] saa7133[0]: subsystem: 11bd:002f, board: UNKNOWN/GENERIC [card=0,autodetected]
[17179594.160000] saa7133[0]: board init: gpio is 600e000
[17179594.312000] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179594.312000] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2d 86 65 ff ff
[17179594.312000] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a5 ff 21 00 c2
[17179594.312000] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 88 03 96 a6 15
[17179594.312000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.312000] saa7133[0]: registered device video0 [v4l2]
[17179594.312000] saa7133[0]: registered device vbi0
[17179594.340000] saa7134 ALSA driver for DMA sound loaded
[17179594.340000] saa7133[0]/alsa: saa7133[0] at 0xdc000000 irq 169 registered as card -1
[17179596.260000] tuner 0-004b: chip found @ 0x96 (saa7133[0])
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#9 Le 20/10/2006, à 15:58
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
et encore celle ci
~$ dmesg | tail
[17179626.760000] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
[17179628.376000] Bluetooth: Core ver 2.8
[17179628.376000] NET: Registered protocol family 31
[17179628.376000] Bluetooth: HCI device and connection manager initialized
[17179628.376000] Bluetooth: HCI socket layer initialized
[17179628.440000] Bluetooth: L2CAP ver 2.8
[17179628.440000] Bluetooth: L2CAP socket layer initialized
[17179628.448000] Bluetooth: RFCOMM socket layer initialized
[17179628.448000] Bluetooth: RFCOMM TTY layer initialized
[17179628.448000] Bluetooth: RFCOMM ver 1.7
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#10 Le 20/10/2006, à 19:00
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
bonsoir
un petit up car je galère toujours
je ne trouve rien pour installer ma carte, je crois que je vais la rapporter demain:(
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#11 Le 20/10/2006, à 20:53
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
j'ai essayé un lsmod et ca me donne ceci : vous en pensez quoi ?
~$ lsmod
Module Size Used by
bttv 179956 0
btcx_risc 5128 1 bttv
i2c_algo_bit 9800 1 bttv
snd_rtctimer 3372 0
rfcomm 43604 0
l2cap 28192 5 rfcomm
bluetooth 54212 4 rfcomm,l2cap
ppdev 9668 0
speedstep_lib 4580 0
cpufreq_userspace 6496 0
cpufreq_stats 6688 0
freq_table 4928 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 7752 0
cpufreq_conservative 9000 0
video 16324 0
tc1100_wmi 6884 0
sony_acpi 5580 0
pcc_acpi 12416 0
hotkey 11492 0
dev_acpi 11236 0
container 4608 0
button 6704 0
acpi_sbs 20172 0
battery 9988 1 acpi_sbs
ac 5220 1 acpi_sbs
i2c_acpi_ec 5120 1 acpi_sbs
ipv6 286976 20
dm_mod 63256 1
md_mod 76052 0
mt2060_tuner 2592 0
xc3028_tuner 7460 0
tuner 58124 2 mt2060_tuner,xc3028_tuner
em2880_dvb 13988 0
dvb_core 88040 1 em2880_dvb
mt352 6756 1 em2880_dvb
zl10353 5476 1 em2880_dvb
em28xx 87316 1 em2880_dvb
tveeprom 15088 2 bttv,em28xx
lp 12356 0
af_packet 24520 2
tsdev 8032 0
snd_emu10k1_synth 8096 0
snd_emux_synth 39968 1 snd_emu10k1_synth
usbhid 42752 0
snd_seq_virmidi 8384 1 snd_emux_synth
snd_seq_midi_emul 7680 1 snd_emux_synth
snd_seq_dummy 3908 0
snd_seq_oss 37216 0
parport_pc 37988 1
parport 39400 3 ppdev,lp,parport_pc
floppy 64676 0
snd_seq_midi 9600 0
snd_seq_midi_event 7520 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_cmipci 37248 0
snd_seq 58160 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
psmouse 40004 0
saa7134_alsa 14432 0
snd_pcm_oss 56448 0
snd_mixer_oss 20544 1 snd_pcm_oss
snd_opl3_lib 11648 1 snd_cmipci
snd_emu10k1 134756 2 snd_emu10k1_synth
serio_raw 7748 0
pcspkr 2244 0
snd_ac97_codec 100224 1 snd_emu10k1
snd_ac97_bus 2400 1 snd_ac97_codec
snd_mpu401_uart 8640 1 snd_cmipci
snd_util_mem 4928 2 snd_emux_synth,snd_emu10k1
snd_rawmidi 26848 4 snd_seq_virmidi,snd_seq_midi,snd_emu10k1,snd_mpu401_uart
snd_seq_device 9228 9 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_opl3_lib,snd_emu10k1,snd_rawmidi
snd_hwdep 9952 3 snd_emux_synth,snd_opl3_lib,snd_emu10k1
emu10k1_gp 3904 0
snd_pcm 96708 5 snd_cmipci,saa7134_alsa,snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_timer 26884 5 snd_rtctimer,snd_seq,snd_opl3_lib,snd_emu10k1,snd_pcm
snd_page_alloc 11304 2 snd_emu10k1,snd_pcm
snd 60004 19 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_cmipci,snd_seq,saa7134_alsa,snd_pcm_oss,snd_mixer_oss,snd_opl3_lib,snd_emu10k1,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_hwdep,snd_pcm,snd_timer
soundcore 10784 1 snd
gameport 16776 3 snd_cmipci,emu10k1_gp
saa7134 116992 1 saa7134_alsa
video_buf 22596 3 bttv,saa7134_alsa,saa7134
compat_ioctl32 1280 3 bttv,em28xx,saa7134
v4l2_common 16032 4 bttv,tuner,em28xx,saa7134
v4l1_compat 14692 2 em28xx,saa7134
ir_kbd_i2c 8560 1 saa7134
ir_common 28772 4 bttv,em28xx,saa7134,ir_kbd_i2c
nvidia 4552660 20
i2c_core 22848 13 bttv,i2c_algo_bit,i2c_acpi_ec,mt2060_tuner,xc3028_tuner,tuner,mt352,zl10353,em28xx,tveeprom,saa7134,ir_kbd_i2c,nvidia
8139cp 24032 0
videodev 9792 3 bttv,em28xx,saa7134
8139too 29056 0
mii 6176 2 8139cp,8139too
intel_agp 24700 1
agpgart 36784 2 nvidia,intel_agp
shpchp 49504 0
pci_hotplug 30788 1 shpchp
evdev 10176 1
ext3 148296 1
jbd 65876 1 ext3
ide_generic 1504 0
uhci_hcd 35536 0
usbcore 139172 5 em2880_dvb,em28xx,usbhid,uhci_hcd
ide_cd 35780 0
cdrom 41408 1 ide_cd
ide_disk 19136 3
piix 11652 1
generic 5124 0
thermal 13768 0
processor 26888 1 thermal
fan 4836 0
capability 4968 0
commoncap 7328 1 capability
vga16fb 13992 1
vgastate 10208 1 vga16fb
fbcon 43904 72
tileblit 2784 1 fbcon
font 8320 1 fbcon
bitblit 6464 1 fbcon
softcursor 2304 1 bitblit
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#12 Le 20/10/2006, à 21:24
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
et ca aussi
~$ dmesg | grep bttv
[17179596.260000] bttv: driver version 0.9.16 loaded
[17179596.260000] bttv: using 8 buffers with 2080k (520 pages) each for capture
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#13 Le 21/10/2006, à 18:38
- awala
Re : [Résolu] urgent : installer une carte tv sous dapper
bonsoir tout le monde
bon alors pour les dernières nouvelles :
hier soir j'ai tout formaté, je me suis mis sous ubuntu 6.10 et là OH MIRACLE ma carte est bien installée
maintenant le combat : je scanne mais je n'obtiens aucune chaine ni numérique ni analogique
donc je continue mes recherches...
sinon rien à voir avec ce post mais le site de nvidia ne m......derait pas un peu en ce moment car je n'arrive pas à télécharger les drivers beta
awala
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#14 Le 04/01/2007, à 20:18
- Crealinks
Re : [Résolu] urgent : installer une carte tv sous dapper
Salut
Perso, j'ai le meme probleme.
J'ai suivi plusieurs tuto. particulierement celui ci http://doc.ubuntu-fr.org/materiel/saa7134
avec tvtime-scanner -d /dev/video0 , il me dit qu'il trouve pas de tuner. Quand je lui en précise un avec --input, il me dit
videoinput: Card refuses to set its input.
je galere 