Ubuntu-fr

TheLiar

Graver avec GnomeBaker

Bonsoir,
J'essaye de graver u cd audio en utilisant gnomebaker.
Quand je lance le processus de gravage, gnome baker affiche:
"Erreur montage /media/cdrom0.

umount: /media/cdrom0 n'est pas monté (selon mtab)" ?????????

Je ne comprends pas bien.

En  mode console mount me donne:
/dev/hda2 on / type reiserfs (rw,notail)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/hda5 on /home type reiserfs (rw)
/dev/hda1 on /mnt/windows type ntfs (rw,umask=0222)
/dev on /.dev type unknown (rw,bind)
none on /dev type tmpfs (rw,size=5M,mode=0755)
usbfs on /proc/bus/usb type usbfs (rw)

Pas la moindre trace de mon cdrom.... et pourtant sur mon bureau une icône cdr vierge est présent!!!

Merci pour votre aide
Je suis sous Hoary depuis peu, compaq presario 2144, graveur QSI.
The Liar

Stemp

Re : Graver avec GnomeBaker

Ton fichier fstab il dit quoi (/etc/fstab) ?

---

«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

TheLiar

Re : Graver avec GnomeBaker

Il dit ça:

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda2       /               reiserfs notail          0       1
/dev/hda5       /home           reiserfs defaults        0       2
/dev/hda6       none            swap    sw              0       0
/dev/hdc        /media/cdrom0   udf,iso9660 ro,user,noauto  0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0
/dev/hda1       /mnt/windows     ntfs    umask=0222      0       0

TheLiar

Re : Graver avec GnomeBaker

Plus d'aide, snifff!

laurent

Re : Graver avec GnomeBaker

Bon, c'est peut-être une connerie, hein (j'ai une de ces gueules de bois, moi...) mais dans système->préférences->périphériques et médias amovibles ,

tout est bien coché pour que ton cd se monte à l'insertion (monter les médias amovibles à l'insertion)?

bon, où ai je mis mes dafalgan....

---

Laurent, petit belge explorant la banquise

lamiricore

Re : Graver avec GnomeBaker

Qu'est ce que ça donne avec graveman?

TheLiar

Re : Graver avec GnomeBaker

L'option "monter les periphériques est activée"

Jamais essayé graveman, j'y cours et je rapporte!

TheLiar

Re : Graver avec GnomeBaker

Graveman a lancé la copie du CD, s'est arrêté en plein milieu du premier morceau et hop, un cd à la poubelle!

laurent

Re : Graver avec GnomeBaker

oui, enfin, moi il me fait ça tout le temps, graveman, donc...

et (sans vouloir te faire faire essayer tous les logiciels libres de gravure), avec k3b, ça donne quoi?

---

Laurent, petit belge explorant la banquise

lamiricore

Re : Graver avec GnomeBaker

Tentes peut-être avec un cdrw d'abord

lamiricore

Re : Graver avec GnomeBaker

profites en pour coller un dmesg dans ton prochain post

TheLiar

Re : Graver avec GnomeBaker

K3b , j'ai pas trop envie de l'installer.
Ce que je ne comprends pas, c'est que je suis tant bien que mal arrivé à graver un cd audio sous warty.
Et là plus rien!

Mon dmesg:

CI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
ACPI: Embedded Controller [EC0] (gpe 24)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:06: ioport range 0x40b-0x40b has been reserved
pnp: 00:06: ioport range 0x480-0x48f has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:06: ioport range 0x8000-0x807f could not be reserved
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1113669385.864:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 3 (level, low) -> IRQ 3
ttyS47 at I/O 0x8828 (irq = 3) is a 8250
ttyS1 at I/O 0x8840 (irq = 3) is a 8250
ttyS2 at I/O 0x8850 (irq = 3) is a 8250
ttyS3 at I/O 0x8860 (irq = 3) is a 8250
ttyS4 at I/O 0x8870 (irq = 3) is a 8250
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
PCI0 MDEM  LAN  LID
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4540KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 164k freed
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (59 C)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Warning: ATI Radeon IGP Northbridge is not yet fully tested.
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: PCI interrupt 0000:00:10.0[A]: no GSI - using IRQ 0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N040ATCS04-0, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ==|
Freeing memory... done (459 pages freed)
Restarting tasks... done
VFS: Can't find ext3 filesystem on dev hda2.
VFS: Can't find an ext2 filesystem on dev hda2.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
Adding 627944k swap on /dev/hda6.  Priority:-1 extents:1
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA ]
parport0: Printer, HEWLETT-PACKARD DESKJET 930C
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0).
atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0).
atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
Capability LSM initialized
ts: Compaq touchscreen protocol output
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
NTFS driver 2.1.22 [Flags: R/O MODULE].
NTFS volume version 3.1.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.10-5-k7
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP320/M chipset
agpgart: Maximum main memory to use for agp memory: 379M
agpgart: AGP aperture is 64M @ 0xd4000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:02.0: ALi Corporation USB 1.1 Controller
ohci_hcd 0000:00:02.0: irq 10, pci mem 0xd0000000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb 1-1: new full speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0018, PCI irq 11
Socket status: 30000007
ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or u se force_addr=0xaddr
ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
natsemi eth0: NatSemi DP8381[56] at 0xd0003000 (0000:00:12.0), 00:0b:cd:53:79:9b , IRQ 11, port TP.
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0315d40(lo)
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
lp0: ECP mode
ibm_acpi: ec object not found
ACPI: Battery Slot [BAT1] (battery present)
lp0: ECP mode
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
lp0: ECP mode
apm: BIOS not found.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc Radeon  Mobility U1
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0 x388-0x38f
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: SGTC: 13333
powernow: Minimum speed 529 MHz. Maximum speed 1656 MHz.
eth0: no IPv6 routers present
usb 1-2: new full speed USB device using ohci_hcd and address 3
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
  Vendor: OLYMPUS   Model: X100,D540Z,C310Z  Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
usb-storage: device scan complete
SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
sda: Write Protect is off
sda: Mode Sense: 18 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
sda: Write Protect is off
sda: Mode Sense: 18 00 00 08
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will b e case sensitive!
usb 1-2: USB disconnect, address 3
cdrom: open failed.
cdrom: open failed.
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x30
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x30
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x30
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 8
Buffer I/O error on device hdc, logical block 2
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x30
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 12
Buffer I/O error on device hdc, logical block 3
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x30
ide: failed opcode was 100
end_request: I/O error, dev hdc, sector 16
Buffer I/O error on device hdc, logical block 4
hdc: tray open
end_request: I/O error, dev hdc, sector 20
Buffer I/O error on device hdc, logical block 5
hdc: tray open
end_request: I/O error, dev hdc, sector 24
Buffer I/O error on device hdc, logical block 6
hdc: tray open
end_request: I/O error, dev hdc, sector 28
Buffer I/O error on device hdc, logical block 7
hdc: tray open
end_request: I/O error, dev hdc, sector 32
Buffer I/O error on device hdc, logical block 8
hdc: tray open
end_request: I/O error, dev hdc, sector 36
Buffer I/O error on device hdc, logical block 9
hdc: tray open
end_request: I/O error, dev hdc, sector 40
Buffer I/O error on device hdc, logical block 10
hdc: tray open
end_request: I/O error, dev hdc, sector 44
Buffer I/O error on device hdc, logical block 11
hdc: tray open
end_request: I/O error, dev hdc, sector 48
Buffer I/O error on device hdc, logical block 12
hdc: tray open
end_request: I/O error, dev hdc, sector 52
Buffer I/O error on device hdc, logical block 13
hdc: tray open
end_request: I/O error, dev hdc, sector 56
Buffer I/O error on device hdc, logical block 14
hdc: tray open
end_request: I/O error, dev hdc, sector 60
Buffer I/O error on device hdc, logical block 15
hdc: tray open
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: tray open
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: tray open
end_request: I/O error, dev hdc, sector 512
Buffer I/O error on device hdc, logical block 128
hdc: tray open
end_request: I/O error, dev hdc, sector 516
Buffer I/O error on device hdc, logical block 129
hdc: tray open
end_request: I/O error, dev hdc, sector 512
Buffer I/O error on device hdc, logical block 128
hdc: tray open
end_request: I/O error, dev hdc, sector 516
Buffer I/O error on device hdc, logical block 129
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ide: failed opcode was 100
cdrom: open failed.
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ide: failed opcode was 100
cdrom: open failed.

lamiricore

Re : Graver avec GnomeBaker

Et tu n'aurais pas changé la configuration des nappes ide ou changé la nappe ide par hasard depuis ton essai concluant de gravure en warty

TheLiar

Re : Graver avec GnomeBaker

Rien touché à mon PC.

ploum

Re : Graver avec GnomeBaker

j'ai eu le même problème que toi et je l'ai résolu très simplement :

apt-get remove gnome-baker && apt-get install graveman

Et en plus, c'est bien plus HIG :-)

---

WiP?

Stemp

Re : Graver avec GnomeBaker

+1
Depuis la dernière version, graveman c'est de la balle

---

«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

TheLiar

Re : Graver avec GnomeBaker

On progresse:
j'ai réussi à graver un cdrw audio avec graveman, mais je ne peux toujours pas l'effacer...
Merci pour vos conseils.

karamazof

Re : Graver avec GnomeBaker

pour effacer simplement, tu peux toujours utiliser nautilus, ya une option pour effacer des rw...
a+