#1 Le 24/09/2006, à 20:56
- kikine40
[Résolu] - xorg.conf ne trouve pas ma carte graphique
Je viens d'installer dapper sur un DELL inspiron640m. Tout fonctionne bien sauf la résolution bloquée à 1024x768 alors que la carte intel 945GM permet 1440x900. J'ai installé le paquet 915resolution, suivi le tuto, et quand je vais dans /etc/X11/xorg.conf j'ai:
Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
... il n'y a pas le modèle de la carte (945GM), ni le driver (i810), et je passe sur la résolution et la mémoire allouée...
Je tourne en rond, please help!
#2 Le 25/09/2006, à 09:00
- michel2652
Re : [Résolu] - xorg.conf ne trouve pas ma carte graphique
Bonjour,
Vu ton post tu n'as pas suivi ce tuto : http://doc.ubuntu-fr.org/materiel/intel … ntel_i915g.
Reprend la manip (avec 915 resolution des dépots Dapper) et ça doit marcher.
A+
#3 Le 25/09/2006, à 11:43
- kikine
Re : [Résolu] - xorg.conf ne trouve pas ma carte graphique
Si, j'ai bien suivi ce tuto, et 915resolution est bien paramétré et installé. Mon problème vient ensuite: je ne retrouve pas ma carte graphique, ni le pilote dans le fichier xorg.conf. Faut-il que je les saisisse moi-même ou ils devraient s'y retrouver automatiquement?
"Et bien moi je le ferai !" (Enèlogés Layor)
Hors ligne
#4 Le 25/09/2006, à 18:07
- DonneDuRhum
Re : [Résolu] - xorg.conf ne trouve pas ma carte graphique
Dans la section "device" de ton fichier xorg, ton driver est vesa, j'y connais rien en driver graphique intel, mais je me demande si un driver commençant par "i"quelquechose (genre i810 comme sur la doc) ne serait pas mieux.
Déja, c'est peut-etre une piste...
Je viens de voir autre chose aussi, tu dits que ton chipset graphique supporte le "1440x900", alors dans la section screen, tu doits le rajouter.
ainsi :
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
Devient :
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
A faire à chaque sous section, de plus DefaultDepth, je penses que tu peux le mettre à 16, ca ne devrait pas changer grand chose en terme de qualité d'image.
Dernière modification par DonneDuRhum (Le 25/09/2006, à 18:20)
PC msi gt72vr 6re
Hors ligne
#5 Le 25/09/2006, à 18:19
- michel2652
Re : [Résolu] - xorg.conf ne trouve pas ma carte graphique
Ton xorg.conf :
Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Alors quen suivant http://doc.ubuntu-fr.org/materiel/intel … _xorg.conf tu devrais avoir à peu près
Section "Device"
Identifier "Intel 915GM"
Driver "i810"
BusID "PCI:0:2:0"
VideoRam 65536
# Option "ForceBIOS" "1920x1440=1440x900" # Sera utile avec la prochaine version du driver, uniquement
EndSectionSection "Monitor"
Identifier "Generic Monitor"
HorizSync 28-72
VertRefresh 59.0 - 75.0
Option "DPMS"
EndSectionSection "Screen"
Identifier "Default Screen"
Device "Intel 915GM"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900" "1400x1050" "1280x1024" "1024x768"
EndSubSection
EndSection[...]
Section "DRI"
Mode 0666
EndSection
[...]
A+
#6 Le 25/09/2006, à 18:23
- DonneDuRhum
Re : [Résolu] - xorg.conf ne trouve pas ma carte graphique
ha, on c'est croisé Michel
PC msi gt72vr 6re
Hors ligne
#7 Le 25/09/2006, à 20:18
- kikine40
Re : [Résolu] - xorg.conf ne trouve pas ma carte graphique
Problème résolu en refaisant une détection de la carte graphique qui ne s'était pas faite après l'install.
Le driver est i810, la résolution est impec en 1440x900 après l'installation de 915resolution.
Merci à tous!
durs, durs les débuts...