Ubuntu-fr

Rav

Dual Screen sur ATI Radeon 320M (RS200 IGP)

Bonjour,

  je cherche à mettre en place un dual screen en gardant l'écran de mon laptop comme écran principal et un écran d'ordinateur en tant qu'écran secondaire mais seulement quand il est branché. J'aimerai bien par exemple que les fenêtres du bureau 2 (par exemple) ne s'ouvrent que sur le moniteur supplémentaire.

  J'utilise les drivers libres.

  J'ai parcouru le forum et j'ai vu le "sudo aticonfig --initial=dual-head" qui me fait planter Xorg.

  Voici mon Xorg actuel:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"latin9"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
	Option		"MaxTapTime"		"0"
	Option		"MaxTapMove"		"180"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon 320M (RS200 IGP)"
	Driver		"ati"
	BusID		"PCI:1:5:0"
	Option		"UseFBDev"		"true"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon 320M (RS200 IGP)"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

Merci d'avance.

Dernière modification par Rav (Le 21/09/2006, à 15:48)

loloemr

Re : Dual Screen sur ATI Radeon 320M (RS200 IGP)

Alors là dans driver tu as ati. Donc tu utilises pas le driver propriétaire mais le driver libre.

Tu as pas fait le aticonfig --initial après l'install des drivers proprios

---

L'open source est garant de notre indépendance technologique, permet de créer des emplois locaux et véhiculent deux idées fondamentales : la transparence de l'information et la supériorité de la collaboration sur la concurrence ... GNU/Linux c'est bon mangez-en !!

Rav

Re : Dual Screen sur ATI Radeon 320M (RS200 IGP)

Salut!

  Lorsque je tape:

Seraphic-Corp $ aticonfig --initial

j'obtiens:

Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.original-2
aticonfig: Writing to '/etc/X11/xorg.conf' failed. Bad file descriptor.
Seraphic-Corp $

Puis après reboot, la section parlant de la carte graphique n'a pas changé.

Dernière modification par Rav (Le 21/09/2006, à 15:57)