Ubuntu-fr

Georges Abitbol

ATI proprios, dapper, kernel 2.6.17.11

Bonjour,

Alors voilà depuis que je suis passé à dapper l'accélération 3D de ma Radeon X700XL est toute cassée, hier je suis passé au kernel 2.6.17.11 + ATI 8.28.8 en espérant que le problème soit résolu mais que nenni. J'ai suivi ce guide pour l'installation, aucun problème.

Alors apparement mes messages sont trop longs si je paste les logs donc je résume :
- les modules fglrx, agpgart et intel_agp sont loadés
- la seule section Device de mon Xorg.conf

Section "Device"

# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
        Identifier  "ATI Graphics Adapter"
        Driver      "fglrx"
        Option      "no_accel" "no"
        Option      "no_dri" "no"
# === misc DRI settings ===
        Option      "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
        Option      "DesktopSetup" "clone"
        Option      "ScreenOverlap" "0"
        Option      "GammaCorrectionI" "0x06419064"
        Option      "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
        Option      "Capabilities" "0x00000000"
        Option      "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
        Option      "VideoOverlay" "on"
# === OpenGL Overlay ===
        Option      "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
        Option      "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
        Option      "PseudoColorVisuals" "off"
# === QBS Management ===
        Option      "Stereo" "off"
        Option      "StereoSyncEnable" "1"
# === FSAA Management ===
        Option      "FSAAEnable" "no"
        Option      "FSAAScale" "1"
        Option      "FSAADisableGamma" "no"
        Option      "FSAACustomizeMSPos" "no"
        Option      "FSAAMSPosX0" "0.000000"
        Option      "FSAAMSPosY0" "0.000000"
        Option      "FSAAMSPosX1" "0.000000"
        Option      "FSAAMSPosY1" "0.000000"
        Option      "FSAAMSPosX2" "0.000000"
        Option      "FSAAMSPosY2" "0.000000"
        Option      "FSAAMSPosX3" "0.000000"
        Option      "FSAAMSPosY3" "0.000000"
        Option      "FSAAMSPosX4" "0.000000"
        Option      "FSAAMSPosY4" "0.000000"
        Option      "FSAAMSPosX5" "0.000000"
        Option      "FSAAMSPosY5" "0.000000"
# === Misc Options ===
        Option      "UseFastTLS" "0"
        Option      "BlockSignalsOnLock" "on"
        Option      "UseInternalAGPGART" "yes"
        Option      "ForceGenericCPU" "no"
#        BusID "PCI:1:0:0"    # no device found at config time
        Option      "ForceMonitors" "crt1,tv,crt2"
EndSection

- aucune erreur dans mon Xorg.log, mais quelques lignes suspectes :

(WW) fglrx(0): board is an unknown third party board, chipset is supported
....
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023

et ainsi de suite jusque 255

Et pourtant fglrxinfo donne

display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)

Donc voilà je sais plus quoi faire...

Georges Abitbol

Re : ATI proprios, dapper, kernel 2.6.17.11

Et j'oubliais, lspci | grep VGA donne 0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 564f