Ubuntu-fr

misteraph

xgl et sortie télé --> écran noir avec le curseur

Bonjour !
J'ai voulu remettre ma sortie tc pour voir mes film maintenant je tourne avec xgl.
Resultat, sur ma télé, j'ai un écran noir. Par contre je vois quand un curseur en foirme de crois que je peux déplacer.
Je n'ai pas fait de modifs sur le xorg.conf depuis que je suis sous xgl.

Voici mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath        "/usr/lib/X11/fonts/CID"	
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"latin9"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "Emulate3Buttons"   "false"
        Option          "Buttons"               "7"
        Option          "ZAxisMapping"       "4 5"
	Option 		"ButtonMapping" "1 2 3 6 7"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "Device0"
        Driver          "nvidia"
        Screen 0 
        Option  "RenderAccel"   "true"
        BusID   "PCI:1:0:0"
EndSection

Section "Device"
        Identifier      "Device1"
        Driver "nvidia"
        Screen 1
        Option  "TVOutFormat" "SVIDEO"
        Option  "TVStandard" "PAL"
        Option  "ConnectedMonitor" "Television"
        BusID   "PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Monitor"
	Option		"DPMS"
EndSection

Section "Monitor"
        Identifier "Television" #TV
        HorizSync 60
        VertRefresh 30-150
EndSection

Section "Screen"
	Identifier      "Screen0"
        Device          "Device0"
        Monitor         "Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "Screen"
        Identifier      "Screen1"
        Device          "Device1"
        Monitor         "Television"
        DefaultDepth    24
        SubSection "Display"
                Depth 24
                Modes "1024x768"
        EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen 0        "Screen0"
        Screen 1        "Screen1" rightof "Screen0"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Pouvez vous m'aider ?

misteraph

Re : xgl et sortie télé --> écran noir avec le curseur

s'il vous plait !
J'insiste !

tbonacco

Re : xgl et sortie télé --> écran noir avec le curseur

J'ai le même proble pour un videoprojecteur

Blackestmajor

Re : xgl et sortie télé --> écran noir avec le curseur

Pourquoi n'avoir mis "RenderAccel" "true" que pour le 1er "device" ?
Essaye de le mettre aussi pour le second "device". Si tu utilises xgl/compiz il faut que les deux bénéficient de cette option des pilotes.