#1 Le 10/06/2006, à 09:09
- heimphil
[resolu] PB ATI 6.06 après mise a jour
Bonjour
Depuis mon passage en Ubuntu 6.06
j'ai le fameux problème ATI
J'ai tout essayé / tutos
Remplacer la libGL.so.1.2
Revenir en version 8.24.8 du driver ATI
rien y fait
j'ai toujours
(je reboot bien à chaque fois)
philippe@falbala:~$ fglrxinfo
[fglrx] API ERROR: could not register entrypoint for SelectTextureSGIS
[fglrx] API ERROR: could not register entrypoint for SelectTextureTransformSGIS
[fglrx] API ERROR: could not register entrypoint for ClientActiveVertexStreamATI[fglrx] API ERROR: could not register entrypoint for VertexBlendEnviATI
.............................
[fglrx] API ERROR: could not register entrypoint for GenerateMipmapEXT
dans /var/log/Xorg.0.log
je ne vois pas d'erreur
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.24.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) Wacom driver level: 47-0.7.2 $
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
.................
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.24.8
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.24g1
(II) ATI Proprietary Linux Driver Build Date: Apr 11 2006 13:36:57
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.24.1-driver-lnx-259766
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9250 (RV280 5960) found
(II) resource ranges after xf86ClaimFixedResources() call:
.........................
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9250 (RV280 5960)" (Chipset = 0x5960)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x004c)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
................
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.24.8
ABI class: X.Org Server Extension, version 0.2
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
..................
J'ai bien une chose bizarre
là :
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) Loading extension ATIFGLRXDRI
Sinon j'ai bien une ATI radéon 9250 128Mo RAM
AGP X8
mon xorg.conf section device
Section "Device"
Identifier "ATI Technologies, Inc. RV280 [Radeon 9200 PRO]"
Driver "ati"
VideoRam 131072
Option "(null)"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
dans /etc/modules j'ai commenté fglrx :
dans /etc/default/linux-restricted-modules-common
j'ai commenté
Et sur demsg :
philippe@falbala:/etc/X11$ dmesg | grep fglrx
[4294700.867000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[4294700.868000] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[4294700.868000] [fglrx] module loaded - fglrx 8.24.8 [Apr 11 2006] on minor 0
[4294701.989000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[4294701.989000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[4294701.989000] [fglrx] Kernel AGP support doesn't provide agplock functionality.
[4294701.989000] [fglrx] AGP detected, AgpState = 0x1b00021b (hardware caps of chipset)
[4294701.989000] [fglrx] AGP enabled, AgpCommand = 0x1b000312 (selected caps)
[4294701.995000] [fglrx] free AGP = 256126976
[4294701.995000] [fglrx] max AGP = 256126976
[4294701.995000] [fglrx] free LFB = 116387840
[4294701.995000] [fglrx] max LFB = 116387840
[4294701.995000] [fglrx] free Inv = 0
[4294701.995000] [fglrx] max Inv = 0
[4294701.995000] [fglrx] total Inv = 0
[4294701.995000] [fglrx] total TIM = 0
[4294701.995000] [fglrx] total FB = 0
[4294701.995000] [fglrx] total AGP = 65536
philippe@falbala:/etc/X11$
Help !!!!
Je ne peux plus bosser puisque OpenOffice crash si je vire ATI et que je reviens en std
les jeux sont tellements lents qu'ils en sont inutilisables
En breezy je n'avais pas de soucis ?
HELP please
Ou est ce que je merde !
Philippe
Dernière modification par heimphil (Le 10/06/2006, à 09:32)
Hors ligne
#2 Le 10/06/2006, à 09:31
- heimphil
Re : [resolu] PB ATI 6.06 après mise a jour
Bon résolu après x heures de recherches et parcours de tutos
je pense que c'est libGL.so.1 qui doit être également modifié
j'avais
philippe@falbala:/usr/lib$ ls | grep libGL
libGLEW.so.1.3
libGLEW.so.1.3.1
libGL.so
libGL.so.1
libGL.so.1.2
libGL.so.1.2.backup
libGLU.a
libGLU.so
libGLU.so.1
libGLU.so.1.3.060401
j'ai fais
sudo cp libGL.so.1 libGL.so.1.backup
sudo rm libGL.so.1
sudo ln -s /usr/lib/libGL.so.1.2 libGL.so.1
sudo tar -cvf libGL_sav.tar libGL*.backup
sudo rm libGL*.backup
sudo ldconfig
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9200 Series DDR Generic
OpenGL version string: 1.3.1060 (X4.3.0-8.24.8)
A prioris tout remarche
Phil
Hors ligne