Ubuntu-fr

pga

[Resolu] kubuntu dapper et le wifi

Je rencontre quelques soucis depuis les dernières mises à jour de ma Kubuntu Dapper.
Après installation d'une Fight5 sur mon portable l'accès wifi fonctionnait correctement (carte PCMCIA 3com OfficeConnect 54g).
Hélas, depuis une quinzaine de jours plus moyen d'accéder au réseau par le wifi.
La carte est reconnue mais n'est plus activée :-(.

Un iwconfig me donne les infos suivantes:

lo        no wireless extensions.

irda0     no wireless extensions.

eth0      no wireless extensions.

eth1      IEEE 802.11b  ESSID:off/any
          Mode:Auto  Channel=0  Access Point: Invalid
          Sensitivity=0/200
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

sit0      no wireless extensions.

et un lspci:
philippe@kubuntu:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05)
0000:02:00.0 CardBus bridge: Texas Instruments PCI1420
0000:02:00.1 CardBus bridge: Texas Instruments PCI1420
0000:02:02.0 Communication controller: Agere Systems WinModem 56k (rev 01)
0000:02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
0000:03:00.0 Network controller: 3Com Corporation 3com 3CRWE154G72 [Office Connect Wireless LAN Adapter] (rev 01)

Je viens de réinstaller le système ce matin à partir d'une version daily datant du 14/04 mais j'obtiens le même résultat :-(

Quelqu'un a t-il une idée ?
Serait-ce un bug ?

Pour info, je n'utilise pas de WEP ni WPA car le réseau est encore en phase de test.

Merci d'avance.

Philippe

Dernière modification par pga (Le 15/04/2006, à 15:39)

wra

Re : [Resolu] kubuntu dapper et le wifi

Salut,

J'ai aussi quelquechose qui ressemble à ça sous breezy nickel ma carte wifi pcmcia était reconnu parfaitement et marchait constament.
Passage à Dapper avec la flight 6 maintenant dans le kinfocenter il apparait que je n'ais pas de controleur pcmcia. Du coup pour me connecter au wifi je dois enlever la carte allumer la machine puis la rebrancher quand le système est démmarer.

Essaie de la débrancher et de la rebrancher puis de regarder dans

dmesg

wra

pga

Re : [Resolu] kubuntu dapper et le wifi

Hum... je viens d'executer dmesg après avoir ôté la carte puis rebranché et je ne trouve rien d'anormal:

[4294667.296000] Linux version 2.6.15-20-386 (buildd@vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[4294667.296000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000000ff70000 (usable)
[4294667.296000]  BIOS-e820: 000000000ff70000 - 000000000ff7e000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000000ff7e000 - 000000000ff80000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
[4294667.296000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 255MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 65392
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 61296 pages, LIFO batch:15
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v002 IBM                                   ) @ 0x000f7450
[4294667.296000] ACPI: XSDT (v001 IBM    TP-1A    0x00001170  LTP 0x00000000) @ 0x0ff73af9
[4294667.296000] ACPI: FADT (v001 IBM    TP-1A    0x00001170 IBM  0x00000001) @ 0x0ff73c00
[4294667.296000] ACPI: SSDT (v001 IBM    TP-1A    0x00001170 MSFT 0x0100000d) @ 0x0ff73cb4
[4294667.296000] ACPI: ECDT (v001 IBM    TP-1A    0x00001170 IBM  0x00000001) @ 0x0ff7deca
[4294667.296000] ACPI: BOOT (v001 IBM    TP-1A    0x00001170  LTP 0x00000001) @ 0x0ff7dfd8
[4294667.296000] ACPI: DSDT (v001 IBM    TP-1A    0x00001170 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda5 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01200000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 1199.117 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.534000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.535000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.550000] Memory: 248880k/261568k available (1973k kernel code, 12124k reserved, 601k data, 288k init, 0k highmem)
[4294670.550000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.610000] Calibrating delay using timer specific routine.. 2399.23 BogoMIPS (lpj=1199618)
[4294670.610000] Security Framework v1.0.0 initialized
[4294670.610000] SELinux:  Disabled at boot.
[4294670.610000] Mount-cache hash table entries: 512
[4294670.610000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294670.610000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294670.610000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294670.610000] CPU: L2 cache: 512K
[4294670.610000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[4294670.610000] mtrr: v2.0 (20020519)
[4294670.610000] CPU: Intel Mobile Intel(R) Pentium(R) III CPU - M  1200MHz stepping 04
[4294670.610000] Enabling fast FPU save and restore... done.
[4294670.610000] Enabling unmasked SIMD FPU exception support... done.
[4294670.610000] Checking 'hlt' instruction... OK.
[4294670.614000] checking if image is initramfs... it is
[4294671.799000] Freeing initrd memory: 6386k freed
[4294671.816000] ACPI: Looking for DSDT ... not found!
[4294671.823000] ACPI: setting ELCR to 0200 (from 0800)
[4294671.845000] NET: Registered protocol family 16
[4294671.845000] EISA bus registered
[4294671.845000] ACPI: bus type pci registered
[4294671.845000] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
[4294671.845000] PCI: Using configuration type 1
[4294671.846000] ACPI: Subsystem revision 20051216
[4294671.848000] ACPI: Found ECDT
[4294671.860000] ACPI: Interpreter enabled
[4294671.860000] ACPI: Using PIC for interrupt routing
[4294671.861000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[4294671.862000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[4294671.862000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[4294671.863000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[4294671.864000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[4294671.865000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[4294671.866000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[4294671.867000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[4294671.867000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.867000] PCI: Probing PCI hardware (bus 00)
[4294671.872000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[4294671.872000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[4294671.872000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294671.872000] Boot video device is 0000:01:00.0
[4294671.872000] PCI: Transparent bridge - 0000:00:1e.0
[4294671.873000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.880000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[4294671.881000] ACPI: Power Resource [PUBS] (on)
[4294671.882000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294671.882000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[4294671.885000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.885000] pnp: PnP ACPI init
[4294671.892000] pnp: PnP ACPI: found 13 devices
[4294671.892000] PnPBIOS: Disabled by ACPI PNP
[4294671.892000] PCI: Using ACPI for IRQ routing
[4294671.892000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294671.900000] PCI: Bridge: 0000:00:01.0
[4294671.900000]   IO window: disabled.
[4294671.900000]   MEM window: c0100000-c01fffff
[4294671.900000]   PREFETCH window: e0000000-ebffffff
[4294671.900000] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[4294671.900000]   IO window: 00002000-000020ff
[4294671.900000]   IO window: 00002400-000024ff
[4294671.900000]   PREFETCH window: f0000000-f1ffffff
[4294671.900000]   MEM window: c2000000-c3ffffff
[4294671.900000] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[4294671.900000]   IO window: 00002800-000028ff
[4294671.900000]   IO window: 00002c00-00002cff
[4294671.900000]   PREFETCH window: f2000000-f3ffffff
[4294671.900000]   MEM window: c4000000-c5ffffff
[4294671.900000] PCI: Bridge: 0000:00:1e.0
[4294671.900000]   IO window: 2000-6fff
[4294671.900000]   MEM window: c0200000-cfffffff
[4294671.900000]   PREFETCH window: f0000000-f7ffffff
[4294671.900000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294671.900000] **** SET: Misaligned resource pointer: cfef0f02 Type 07 Len 0
[4294671.901000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294671.901000] PCI: setting IRQ 11 as level-triggered
[4294671.901000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294671.901000] **** SET: Misaligned resource pointer: cfef0f02 Type 07 Len 0
[4294671.902000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[4294671.902000] ACPI: PCI Interrupt 0000:02:00.1[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294671.902000] Simple Boot Flag at 0x35 set to 0x1
[4294671.903000] audit: initializing netlink socket (disabled)
[4294671.903000] audit(1145013496.902:1): initialized
[4294671.903000] VFS: Disk quotas dquot_6.5.1
[4294671.903000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.903000] Initializing Cryptographic API
[4294671.903000] io scheduler noop registered
[4294671.903000] io scheduler anticipatory registered
[4294671.903000] io scheduler deadline registered
[4294671.903000] io scheduler cfq registered
[4294671.903000] isapnp: Scanning for PnP cards...
[4294672.259000] isapnp: No Plug & Play device found
[4294672.282000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[4294672.287000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.288000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.288000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294672.292000] **** SET: Misaligned resource pointer: ce9bdaa2 Type 00 Len 42
[4294672.292000] pnp: Device 00:09 activated.
[4294672.292000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[4294672.293000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.293000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.293000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.293000] ACPI: bus type ide registered
[4294672.293000] mice: PS/2 mouse device common for all mice
[4294672.294000] EISA: Probing bus 0 at eisa.0
[4294672.294000] Cannot allocate resource for EISA slot 1
[4294672.294000] Cannot allocate resource for EISA slot 2
[4294672.294000] Cannot allocate resource for EISA slot 3
[4294672.294000] Cannot allocate resource for EISA slot 4
[4294672.294000] Cannot allocate resource for EISA slot 5
[4294672.294000] Cannot allocate resource for EISA slot 6
[4294672.294000] EISA: Detected 0 cards.
[4294672.294000] NET: Registered protocol family 2
[4294672.302000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.303000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294672.303000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294672.303000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294672.303000] TCP: Hash tables configured (established 16384 bind 16384)
[4294672.303000] TCP reno registered
[4294672.303000] TCP bic registered
[4294672.303000] NET: Registered protocol family 1
[4294672.303000] NET: Registered protocol family 8
[4294672.303000] NET: Registered protocol family 20
[4294672.303000] Using IPI Shortcut mode
[4294672.303000] ACPI wakeup devices: 
[4294672.303000]  LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC97 
[4294672.303000] ACPI: (supports S0 S3 S4 S5)
[4294672.304000] Freeing unused kernel memory: 288k freed
[4294672.409000] vga16fb: initializing
[4294672.409000] vga16fb: mapped to 0xc00a0000
[4294672.526000] Console: switching to colour frame buffer device 80x25
[4294672.526000] fb0: VGA16 VGA frame buffer device
[4294673.624000] Capability LSM initialized
[4294673.670000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294673.673000] ACPI: Thermal Zone [THM0] (57 C)
[4294674.233000] ICH3M: IDE controller at PCI slot 0000:00:1f.1
[4294674.233000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294674.233000] **** SET: Misaligned resource pointer: ce9dcae2 Type 07 Len 0
[4294674.234000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294674.234000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294674.234000] ICH3M: chipset revision 2
[4294674.234000] ICH3M: not 100% native mode: will probe irqs later
[4294674.234000]     ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
[4294674.234000]     ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
[4294674.234000] Probing IDE interface ide0...
[4294674.498000] hda: FUJITSU MHS2030AT, ATA DISK drive
[4294675.156000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.156000] Probing IDE interface ide1...
[4294675.828000] hdc: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
[4294676.440000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.450000] hda: max request size: 128KiB
[4294676.510000] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=62016/15/63, UDMA(100)
[4294676.510000] hda: cache flushes supported
[4294676.510000]  hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[4294676.581000] hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
[4294676.581000] Uniform CD-ROM driver Revision: 3.20
[4294677.112000] usbcore: registered new driver usbfs
[4294677.112000] usbcore: registered new driver hub
[4294677.115000] USB Universal Host Controller Interface driver v2.3
[4294677.116000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294677.116000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294677.116000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294677.116000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294677.116000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[4294677.117000] hub 1-0:1.0: USB hub found
[4294677.117000] hub 1-0:1.0: 2 ports detected
[4294677.218000] **** SET: Misaligned resource pointer: cfbbeb02 Type 07 Len 0
[4294677.219000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294677.219000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294677.219000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294677.219000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294677.219000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294677.219000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[4294677.219000] hub 2-0:1.0: USB hub found
[4294677.219000] hub 2-0:1.0: 2 ports detected
[4294677.320000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294677.320000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294677.320000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294677.320000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294677.320000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[4294677.320000] hub 3-0:1.0: USB hub found
[4294677.320000] hub 3-0:1.0: 2 ports detected
[4294677.600000] Attempting manual resume
[4294677.644000] EXT3-fs: mounted filesystem with ordered data mode.
[4294677.661000] kjournald starting.  Commit interval 5 seconds
[4294692.683000] Linux agpgart interface v0.101 (c) Dave Jones
[4294692.702000] agpgart: Detected an Intel 830M Chipset.
[4294692.718000] agpgart: AGP aperture is 256M @ 0xd0000000
[4294692.780000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294692.790000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294693.440000] Floppy drive(s): fd0 is 1.44M
[4294693.454000] FDC 0 is a National Semiconductor PC87306
[4294693.459000] parport: PnPBIOS parport detected.
[4294693.459000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[4294693.465000] hw_random hardware driver 1.0.0 loaded
[4294693.675000] input: PC Speaker as /class/input/input1
[4294693.811000] irda_init()
[4294693.811000] NET: Registered protocol family 23
[4294693.941000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[4294693.947000] **** SET: Misaligned resource pointer: cbde3842 Type 00 Len 42
[4294693.947000] **** SET: Misaligned resource pointer: cbde38c6 Type 07 Len 0
[4294693.948000] pnp: Device 00:0b activated.
[4294693.948000] nsc_ircc_pnp_probe() : Found cfg_base 0x000 ; firbase 0x2F8 ; irq 3 ; dma 1.
[4294693.948000] nsc-ircc, Found chip at base=0x000
[4294693.948000] nsc-ircc, driver loaded (Dag Brattli)
[4294693.948000] IrDA: Registered device irda0
[4294693.948000] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
[4294693.948000] nsc-ircc, Found chip at base=0x02e
[4294693.948000] nsc-ircc, driver loaded (Dag Brattli)
[4294693.948000] nsc_ircc_open(), can't get iobase of 0x2f8
[4294693.958000] input: TPPS/2 IBM TrackPoint as /class/input/input2
[4294693.975000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
[4294693.975000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294693.975000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294694.445000] ts: Compaq touchscreen protocol output
[4294694.456000] Real Time Clock Driver v1.12
[4294694.464000] ltmodem: module license 'Proprietary' taints kernel.
[4294694.466000] Loading Lucent Modem Controller driver version 8.26-alk-8
[4294694.469000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294694.469000] Detected Parameters Irq=11 BaseAddress=0x6000 ComAddress=0x6440
[4294694.469000] ttyLTM0 at I/O 0x6000 (irq = 11) is a Lucent/Agere Modem
[4294694.557000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[4294694.557000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294694.679000] intel8x0_measure_ac97_clock: measured 50710 usecs
[4294694.679000] intel8x0: clocking to 48000
[4294694.683000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294694.683000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b]
[4294694.683000] Yenta: Using INTVAL to route CSC interrupts to PCI
[4294694.683000] Yenta: Routing CardBus interrupts to PCI
[4294694.683000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[4294694.906000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[4294694.906000] Socket status: 30000020
[4294694.906000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
[4294694.906000] cs: IO port probe 0x2000-0x6fff: clean.
[4294694.908000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[4294694.908000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[4294694.908000] **** SET: Misaligned resource pointer: cc5a1ee2 Type 07 Len 0
[4294694.909000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[4294694.909000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[4294694.932000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:02:8A:96:9A:D8
[4294694.933000] ACPI: PCI Interrupt 0000:02:00.1[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294694.933000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b]
[4294694.933000] Yenta: Using INTVAL to route CSC interrupts to PCI
[4294694.933000] Yenta: Routing CardBus interrupts to PCI
[4294694.933000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
[4294695.147000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[4294695.156000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[4294695.156000] Socket status: 30000006
[4294695.156000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
[4294695.156000] cs: IO port probe 0x2000-0x6fff: clean.
[4294695.158000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[4294695.158000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[4294695.586000] pccard: CardBus card inserted into slot 0
[4294695.679000] ieee80211_crypt: registered algorithm 'NULL'
[4294695.681000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294695.681000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294695.735000] Loaded islsm_pci driver, version 0
[4294695.736000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[4294695.736000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294695.812000] Loaded prism54 driver, version 1.2
[4294695.873000] cs: IO port probe 0x100-0x3af: clean.
[4294695.874000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294695.875000] cs: IO port probe 0x820-0x8ff: clean.
[4294695.875000] cs: IO port probe 0xc00-0xcf7: clean.
[4294695.875000] cs: IO port probe 0xa00-0xaff: clean.
[4294695.940000] cs: IO port probe 0x100-0x3af: clean.
[4294695.941000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294695.941000] cs: IO port probe 0x820-0x8ff: clean.
[4294695.942000] cs: IO port probe 0xc00-0xcf7: clean.
[4294695.942000] cs: IO port probe 0xa00-0xaff: clean.
[4294696.237000] NET: Registered protocol family 17
[4294696.267000] lp0: using parport0 (interrupt-driven).
[4294696.350000] Adding 521600k swap on /dev/hda6.  Priority:-1 extents:1 across:521600k
[4294696.489000] EXT3 FS on hda5, internal journal
[4294696.711000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294696.711000] md: bitmap version 4.39
[4294697.326000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294698.104000] cdrom: open failed.
[4294698.851000] NET: Registered protocol family 10
[4294698.851000] lo: Disabled Privacy Extensions
[4294698.851000] IPv6 over IPv4 tunneling driver
[4294700.098000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4294700.201000] NTFS volume version 3.0.
[4294700.418000] NTFS volume version 3.0.
[4294703.194000] ACPI: AC Adapter [AC] (on-line)
[4294703.209000] ACPI: Battery Slot [BAT0] (battery present)
[4294703.341000] ACPI: Power Button (FF) [PWRF]
[4294703.341000] ACPI: Lid Switch [LID]
[4294703.341000] ACPI: Sleep Button (CM) [SLPB]
[4294703.496000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
[4294703.496000] ibm_acpi: http://ibm-acpi.sf.net/
[4294703.502000] ibm_acpi: dock device not present
[4294703.534000] pcc_acpi: loading...
[4294703.679000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[4294706.804000] IBM machine detected. Enabling interrupts during APM calls.
[4294706.805000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294706.805000] apm: overridden by ACPI.
[4294709.596000] eth0: no IPv6 routers present
[4294710.872000] Non-volatile memory driver v1.2
[4294710.892000] input: /usr/sbin/thinkpad-keys as /class/input/input3
[4294711.342000] hdc: drive_cmd: status=0x01 { Error }
[4294711.342000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294711.342000] ide: failed opcode was: 0xec
[4294711.370000] hdc: drive_cmd: status=0x01 { Error }
[4294711.370000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294711.370000] ide: failed opcode was: 0xec
[4294711.808000] Bluetooth: Core ver 2.8
[4294711.808000] NET: Registered protocol family 31
[4294711.808000] Bluetooth: HCI device and connection manager initialized
[4294711.808000] Bluetooth: HCI socket layer initialized
[4294711.854000] Bluetooth: L2CAP ver 2.8
[4294711.854000] Bluetooth: L2CAP socket layer initialized
[4294711.878000] Bluetooth: RFCOMM socket layer initialized
[4294711.878000] Bluetooth: RFCOMM TTY layer initialized
[4294711.878000] Bluetooth: RFCOMM ver 1.7
[4294716.300000] [drm] Initialized drm 1.0.0 20040925
[4294716.310000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294716.311000] mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary
[4294716.312000] [drm] Initialized savage 2.4.1 20050313 on minor 0: 
[4294716.314000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294716.314000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4294716.314000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[4295975.042000] pccard: card ejected from slot 0
[4295975.073000] eth1: hot unplug detected
[4295975.073000] eth1: removing device
[4295975.080000] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[4295978.753000] pccard: CardBus card inserted into slot 0
[4295978.753000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[4295978.753000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11

philippe

pga

Re : [Resolu] kubuntu dapper et le wifi

J'ai trouvé la raison de mon problème wifi.
C'est la version du kernel qui est en cause.
Je suis repassé en version 2.6.15-19 et la carte wifi est de nouveau disponible et fonctionnelle.
Il doit donc y avoir un bug avec la version 2.6.15-20 actuelle.

Philippe

pga

Re : [Resolu] kubuntu dapper et le wifi

J'ai depuis trouvé comment utiliser le dernier kernel 2.6.-15-20 sans perdre l'accès wifi.
En fait il semblerait que le module islsm_pci empêche le fonctionnement normal qu'une carte à base d'un prism54 comme ma 3com actuelle.
J'ai trouvé la solution sur le forum ubuntu:

http://www.ubuntuforums.org/showthread.php?t=156025

J'ai donc blacklisté le module incriminé et ma carte fonctionne maintenant avec le kernel 2.6.15-20.

Philippe