[resolu] carte reseau non reconnu apres mise a jour [resolu]

quick · Le 04/04/2006, à 12:08

bonjour a tous

voila deux jours que je parcours le forum sans trouver de solution.

apres un apt-get dist-upgrade je boot sur la derniere version installé et la tout se passe bien sauf que la carte reseau eth1 n'est plus reconnu il ne reste que l'eth0. Je ne peut donc pas avoir acces au net.

avant la mise a jour j'etais sur le kernel 2.6.15-18-386 et la aucun soucis et
maintenant sur le kernel 2.6.15-19-386 plus de eth1

Voila si quelqu'un a une solution elle sera la bien venue.:D

Ps: un grand bravo et merci a toutes celles et ceux qui s'investissent pour aider les autres vive la mentalitée Ubuntu

quick

Dernière modification par quick (Le 06/04/2006, à 14:51)

Blackpegaz · Le 04/04/2006, à 12:35

Salut,

jette un oeil la dessus :
http://forum.ubuntu-fr.org/viewtopic.php?id=34568

@+

quick · Le 04/04/2006, à 12:44

ok je vais look merci Blackpegaz

Dernière modification par quick (Le 04/04/2006, à 15:00)

Phantom Lord · Le 04/04/2006, à 12:50

je precise que quick est sous livebox il vient de refaire une maj et de réessayer il a eth0 mais pas eth1
je poste pour lui ne le voyant pas revenir

quick · Le 04/04/2006, à 12:54

voila mon dhclient avant mise a jour

root@fred:~# sudo dhclient
Internet Systems Consortium DHCP Client V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

Listening on LPF/eth0/00:13:d3:0f:52:7b
Sending on LPF/eth0/00:13:d3:0f:52:7b
Listening on LPF/eth1/00:07:3a:a0:92:3a
Sending on LPF/eth1/00:07:3a:a0:92:3a
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
DHCPOFFER from 192.168.1.1
DHCPREQUEST on eth1 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.54 -- renewal in 34328 seconds.

et voila le dhclient apres mise a jour

root@fred:~# sudo dhclient
Internet Systems Consortium DHCP Client V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

Listening on LPF/eth0/00:13:d3:0f:52:7b
Sending on LPF/eth0/00:13:d3:0f:52:7b
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
root@fred:~#

eth1 n'apparait plus

je vous met aussi d'autre info qui m'on parus necessaire en ayant eppluché le forum

root@fred:~# sudo lspci -v
0000:00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64
I/O ports at 4100 [disabled] [size=32]
Memory at <ignored> (64-bit, non-prefetchable)

0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f (prog-if 00 [
Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000
Capabilities: [44] #08 [a803]
Capabilities: [b0] #0d [0000]

0000:00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller
(prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
I/O ports at fe00 [size=8]
I/O ports at fd00 [size=4]
I/O ports at fc00 [size=8]
I/O ports at fb00 [size=4]
I/O ports at fa00 [size=16]
Memory at fe02f000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at 40000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-

0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193
Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-

0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-

0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
(prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-

0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: 66MHz, medium devsel
I/O ports at 0400 [size=16]
Memory at fe02b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] #08 [a802]

0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE C
ontroller ATI (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f800 [size=16]
Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-

0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 0

0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if
01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: fde00000-fdefffff

0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 A
udio Controller (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 2a25
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 209
Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable
-

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Hyp
erTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] #08 [2101]

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Add
ress Map
Flags: fast devsel

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRA
M Controller
Flags: fast devsel

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Mis
cellaneous Control
Flags: fast devsel

0000:01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpres
s 200G Series] (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at ef00 [size=256]
Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2

0000:02:01.0 Communication controller: Agere Systems V.92 56K WinModem (rev 03)
Subsystem: Agere Systems: Unknown device 044c
Flags: bus master, medium devsel, latency 64, IRQ 255
Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
I/O ports at df00 [size=8]
I/O ports at de00 [size=256]
Capabilities: [f8] Power Management version 2

0000:02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C /8139C+ (rev 10)
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, medium devsel, latency 64, IRQ 201
I/O ports at dd00 [size=256]
Memory at fdcfe000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fde00000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2

0000:02:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Control ler (rev 80) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 2a24
Flags: bus master, medium devsel, latency 64, IRQ 169
Memory at fdcfd000 (32-bit, non-prefetchable) [size=2K]
I/O ports at dc00 [size=128]
Capabilities: [50] Power Management version 2

root@fred:~#

root@fred:~# sudo lsmod
Module Size Used by
ipv6 265600 6
l2cap 26244 2
bluetooth 49892 3 l2cap
radeon 108832 0
drm 72852 1 radeon
powernow_k8 12680 0
cpufreq_userspace 4696 1
cpufreq_stats 5636 0
freq_table 4740 2 powernow_k8,cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 6428 0
cpufreq_conservative 7332 0
video 16260 0
tc1100_wmi 6916 0
sony_acpi 5516 0
pcc_acpi 11136 0
hotkey 11556 0
dev_acpi 11140 0
container 4608 0
button 6672 0
acpi_sbs 19980 0
battery 9988 1 acpi_sbs
ac 5252 1 acpi_sbs
i2c_acpi_ec 5120 1 acpi_sbs
i2c_core 21904 1 i2c_acpi_ec
af_packet 22920 2
md_mod 72532 0
sr_mod 16932 0
sbp2 24196 0
parport_pc 35780 1
lp 11844 0
parport 36296 2 parport_pc,lp
tsdev 8000 0
snd_atiixp 19724 1
snd_ac97_codec 92704 1 snd_atiixp
snd_ac97_bus 2304 1 snd_ac97_codec
psmouse 36100 0
snd_pcm_oss 53664 0
snd_mixer_oss 18688 1 snd_pcm_oss
snd_pcm 89736 3 snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_timer 25220 1 snd_pcm
snd 55268 8 snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10208 1 snd
serio_raw 7300 0
snd_page_alloc 10632 2 snd_atiixp,snd_pcm
8139cp 22528 0
ati_agp 9100 0
agpgart 34888 2 drm,ati_agp
8139too 26880 0
mii 5888 2 8139cp,8139too
shpchp 45632 0
pci_hotplug 29236 1 shpchp
ohci1394 35124 0
ieee1394 299832 2 sbp2,ohci1394
evdev 9856 1
ext3 135688 2
jbd 58772 1 ext3
dm_mod 58936 4
ide_generic 1536 0
ehci_hcd 32008 0
ohci_hcd 21892 0
usbcore 129668 3 ehci_hcd,ohci_hcd
ide_cd 33028 0
cdrom 38560 2 sr_mod,ide_cd
ide_disk 17664 4
atiixp 6800 1
generic 5124 0
sata_sil 9348 0
libata 61704 1 sata_sil
scsi_mod 138984 3 sr_mod,sbp2,libata
thermal 13576 0
processor 23360 2 powernow_k8,thermal
fan 4868 0
capability 5000 0
commoncap 7296 1 capability
vesafb 8476 1
fbcon 42784 72
tileblit 2816 1 fbcon
font 8320 1 fbcon
bitblit 6272 1 fbcon
softcursor 2304 1 bitblit
root@fred:~#

root@fred:~# sudo dmesg
[4294667.296000] Linux version 2.6.15-19-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 0000000037ef0000 (usable)
[4294667.296000] BIOS-e820: 0000000037ef0000 - 0000000037ef3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 0000000037ef3000 - 0000000037f00000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 894MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f48c0
[4294667.296000] On node 0 totalpages: 229104
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225008 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.4 present.
[4294667.296000] ACPI: RSDP (v000 HP-CPC ) @ 0x000f87e0
[4294667.296000] ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ef3040
[4294667.296000] ACPI: FADT (v002 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ef30c0
[4294667.296000] ACPI: SSDT (v001 HP-CPC POWERNOW 0x00000001 LTP 0x00000001) @ 0x37ef6d00
[4294667.296000] ACPI: SRAT (v001 HP-CPC HAMMER 0x00000001 AMD 0x00000001) @ 0x37ef6e00
[4294667.296000] ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ef6f00
[4294667.296000] ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ef6c40
[4294667.296000] ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:15 APIC version 16
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 37f00000:a8100000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/mapper/Ubuntu-root ro vga=0x318 quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 1791.506 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour dummy device 80x25
[4294669.292000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294669.293000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.310000] Memory: 898096k/916416k available (1971k kernel code, 17668k reserved, 599k data, 288k init, 0k highmem)
[4294669.310000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.370000] Calibrating delay using timer specific routine.. 3585.48 BogoMIPS (lpj=1792740)
[4294669.370000] Security Framework v1.0.0 initialized
[4294669.370000] SELinux: Disabled at boot.
[4294669.370000] Mount-cache hash table entries: 512
[4294669.370000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294669.370000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294669.370000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294669.370000] CPU: L2 Cache: 128K (64 bytes/line)
[4294669.370000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
[4294669.370000] mtrr: v2.0 (20020519)
[4294669.370000] CPU: AMD Sempron(tm) Processor 3000+ stepping 00
[4294669.370000] Enabling fast FPU save and restore... done.
[4294669.370000] Enabling unmasked SIMD FPU exception support... done.
[4294669.370000] Checking 'hlt' instruction... OK.
[4294669.374000] checking if image is initramfs... it is
[4294669.902000] Freeing initrd memory: 6376k freed
[4294669.918000] ACPI: Looking for DSDT ... not found!
[4294669.927000] ENABLING IO-APIC IRQs
[4294669.928000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294669.950000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[4294669.950000] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[4294669.950000] ...trying to set up timer as Virtual Wire IRQ... works.
[4294670.061000] NET: Registered protocol family 16
[4294670.061000] EISA bus registered
[4294670.061000] ACPI: bus type pci registered
[4294670.079000] PCI: PCI BIOS revision 3.00 entry at 0xfac80, last bus=2
[4294670.079000] PCI: Using MMCONFIG
[4294670.079000] ACPI: Subsystem revision 20051216
[4294670.092000] ACPI: Interpreter enabled
[4294670.092000] ACPI: Using IOAPIC for interrupt routing
[4294670.092000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.092000] PCI: Probing PCI hardware (bus 00)
[4294670.092000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.094000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[4294670.094000] Boot video device is 0000:01:05.0
[4294670.095000] PCI: Transparent bridge - 0000:00:14.4
[4294670.095000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.111000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[4294670.112000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[4294670.112000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[4294670.112000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[4294670.112000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
[4294670.112000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
[4294670.113000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled.
[4294670.113000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[4294670.113000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[4294670.115000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294670.115000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.115000] pnp: PnP ACPI init
[4294670.116000] pnp: PnPACPI: unknown resource type 7
[4294670.116000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294670.116000] pnp: PnPACPI: unknown resource type 7
[4294670.116000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294670.116000] pnp: PnPACPI: unknown resource type 7
[4294670.116000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294670.116000] pnp: PnPACPI: unknown resource type 7
[4294670.116000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294670.116000] pnp: PnPACPI: unknown resource type 7
[4294670.116000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294670.116000] pnp: PnPACPI: unknown resource type 7
[4294670.116000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294670.117000] pnp: PnPACPI: unknown resource type 7
[4294670.117000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401
[4294670.117000] pnp: PnPACPI: unknown resource type 7
[4294670.117000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0f13
[4294670.117000] pnp: PnPACPI: unknown resource type 7
[4294670.117000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294670.117000] pnp: PnPACPI: unknown resource type 7
[4294670.117000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294670.117000] pnp: PnPACPI: unknown resource type 7
[4294670.117000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294670.117000] pnp: PnP ACPI: found 0 devices
[4294670.117000] PnPBIOS: Disabled by ACPI PNP
[4294670.117000] PCI: Using ACPI for IRQ routing
[4294670.117000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.117000] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[4294670.167000] PCI: Bridge: 0000:00:01.0
[4294670.167000] IO window: e000-efff
[4294670.167000] MEM window: fdd00000-fddfffff
[4294670.167000] PREFETCH window: d0000000-dfffffff
[4294670.167000] PCI: Bridge: 0000:00:14.4
[4294670.167000] IO window: d000-dfff
[4294670.167000] MEM window: fdc00000-fdcfffff
[4294670.167000] PREFETCH window: fde00000-fdefffff
[4294670.168000] audit: initializing netlink socket (disabled)
[4294670.168000] audit(1144153025.167:1): initialized
[4294670.168000] VFS: Disk quotas dquot_6.5.1
[4294670.168000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.168000] Initializing Cryptographic API
[4294670.168000] io scheduler noop registered
[4294670.168000] io scheduler anticipatory registered
[4294670.168000] io scheduler deadline registered
[4294670.168000] io scheduler cfq registered
[4294670.168000] isapnp: Scanning for PnP cards...
[4294670.525000] isapnp: No Plug & Play device found
[4294670.538000] PNP: No PS/2 controller found. Probing ports directly.
[4294671.084000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.092000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.092000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.095000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.095000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.095000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.095000] ACPI: bus type ide registered
[4294671.096000] mice: PS/2 mouse device common for all mice
[4294671.102000] EISA: Probing bus 0 at eisa.0
[4294671.102000] Cannot allocate resource for EISA slot 4
[4294671.102000] EISA: Detected 0 cards.
[4294671.102000] NET: Registered protocol family 2
[4294671.112000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294671.112000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[4294671.112000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294671.113000] TCP: Hash tables configured (established 131072 bind 65536)
[4294671.113000] TCP reno registered
[4294671.113000] TCP bic registered
[4294671.113000] NET: Registered protocol family 1
[4294671.113000] NET: Registered protocol family 8
[4294671.113000] NET: Registered protocol family 20
[4294671.113000] Using IPI Shortcut mode
[4294671.113000] ACPI wakeup devices:
[4294671.113000] PCI0 USB0 USB1 USB2 AUDO P2P MAC
[4294671.113000] ACPI: (supports S0 S1 S3 S4 S5)
[4294671.113000] Freeing unused kernel memory: 288k freed
[4294671.145000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.202000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 4608k, total 131072k
[4294671.202000] vesafb: mode is 1024x768x24, linelength=3072, pages=55
[4294671.202000] vesafb: protected mode interface info at c000:5288
[4294671.202000] vesafb: scrolling: redraw
[4294671.202000] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[4294671.202000] vesafb: Mode is VGA compatible
[4294671.231000] Console: switching to colour frame buffer device 128x48
[4294671.231000] fb0: VESA VGA frame buffer device
[4294672.328000] Capability LSM initialized
[4294672.364000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294672.910000] SCSI subsystem initialized
[4294672.911000] libata version 1.20 loaded.
[4294672.913000] sata_sil 0000:00:12.0: version 0.9
[4294672.913000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 177
[4294672.913000] ata1: SATA max UDMA/100 cmd 0xF8832080 ctl 0xF883208A bmdma 0xF8832000 irq 177
[4294672.913000] ata2: SATA max UDMA/100 cmd 0xF88320C0 ctl 0xF88320CA bmdma 0xF8832008 irq 177
[4294673.114000] ata1: no device found (phy stat 00000000)
[4294673.114000] scsi0 : sata_sil
[4294673.315000] ata2: no device found (phy stat 00000000)
[4294673.315000] scsi1 : sata_sil
[4294673.338000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[4294673.338000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185
[4294673.338000] ATIIXP: chipset revision 0
[4294673.338000] ATIIXP: not 100% native mode: will probe irqs later
[4294673.338000] ide0: BM-DMA at 0xf800-0xf807, BIOS settings: hda:pio, hdb:pio
[4294673.338000] ide1: BM-DMA at 0xf808-0xf80f, BIOS settings: hdc:pio, hdd:pio
[4294673.338000] Probing IDE interface ide0...
[4294673.602000] hda: ST340014A, ATA DISK drive
[4294673.857000] hdb: ST3160021A, ATA DISK drive
[4294673.909000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.909000] Probing IDE interface ide1...
[4294674.581000] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
[4294675.193000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.200000] hda: max request size: 1024KiB
[4294675.212000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[4294675.213000] hda: cache flushes supported
[4294675.213000] hda: hda1 hda2 < hda5 >
[4294675.246000] hdb: max request size: 1024KiB
[4294675.246000] hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
[4294675.247000] hdb: cache flushes supported
[4294675.247000] hdb:<6>hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294675.248000] Uniform CD-ROM driver Revision: 3.20
[4294675.260000] hdb1 < hdb5 hdb6 >
[4294675.653000] usbcore: registered new driver usbfs
[4294675.653000] usbcore: registered new driver hub
[4294675.655000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294675.656000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 193
[4294675.656000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[4294675.680000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[4294675.680000] ohci_hcd 0000:00:13.0: irq 193, io mem 0xfe02e000
[4294675.735000] hub 1-0:1.0: USB hub found
[4294675.735000] hub 1-0:1.0: 4 ports detected
[4294675.836000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 193
[4294675.836000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[4294675.884000] APIC error on CPU0: 00(40)
[4294675.920000] APIC error on CPU0: 40(40)
[4294676.052000] APIC error on CPU0: 40(40)
[4294676.153000] APIC error on CPU0: 40(40)
[4294676.290000] APIC error on CPU0: 40(40)
[4294676.350000] irq 193: nobody cared (try booting with the "irqpoll" option)
[4294676.350000] [<c013e922>] __report_bad_irq+0x22/0x80
[4294676.350000] [<c013ea18>] note_interrupt+0x68/0xc0
[4294676.350000] [<c013e2dc>] __do_IRQ+0xbc/0xe0
[4294676.350000] [<c010597a>] do_IRQ+0x1a/0x30
[4294676.350000] [<c01040ea>] common_interrupt+0x1a/0x20
[4294676.350000] [<c010106a>] default_idle+0x3a/0x70
[4294676.350000] [<c01010dc>] cpu_idle+0x1c/0x60
[4294676.350000] [<c03867c6>] start_kernel+0x176/0x1d0
[4294676.350000] handlers:
[4294676.350000] [<f8d66330>] (usb_hcd_irq+0x0/0x60 [usbcore])
[4294676.350000] Disabling IRQ #193
[4294676.351000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[4294676.351000] ohci_hcd 0000:00:13.1: irq 193, io mem 0xfe02d000
[4294676.406000] hub 2-0:1.0: USB hub found
[4294676.406000] hub 2-0:1.0: 4 ports detected
[4294676.508000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 193
[4294676.508000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[4294676.508000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[4294676.508000] ehci_hcd 0000:00:13.2: irq 193, io mem 0xfe02c000
[4294676.508000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294676.508000] hub 3-0:1.0: USB hub found
[4294676.508000] hub 3-0:1.0: 8 ports detected
[4294676.673000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294676.703000] cdrom: open failed.
[4294676.871000] Attempting manual resume
[4294676.909000] EXT3-fs: mounted filesystem with ordered data mode.
[4294676.927000] kjournald starting. Commit interval 5 seconds
[4294677.465000] usb 3-6: new high speed USB device using ehci_hcd and address 4
[4294678.465000] ehci_hcd 0000:00:13.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[4294685.819000] ieee1394: Initialized config rom entry `ip1394'
[4294685.821000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294685.821000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 169
[4294685.821000] PCI: Via IRQ fixup for 0000:02:04.0, from 255 to 9
[4294685.840000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294685.887000] 8139too Fast Ethernet driver 0.9.27
[4294685.887000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 201
[4294685.888000] eth0: RealTek RTL8139 at 0xf8dba000, 00:13:d3:0f:52:7b, IRQ 201
[4294685.888000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294685.900000] Linux agpgart interface v0.101 (c) Dave Jones
[4294685.956000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fdcfd000-fdcfd7ff] Max Packet=[2048]
[4294685.961000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294685.978000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294686.551000] eth0: link down
[4294686.628000] ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 209
[4294686.846000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
[4294686.902000] ts: Compaq touchscreen protocol output
[4294687.041000] parport0: PC-style at 0x378 [PCSPP,EPP]
[4294687.124000] lp0: using parport0 (polling).
[4294687.154000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294687.154000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294687.154000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294687.219000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000a8c5c4]
[4294687.248000] Adding 2711544k swap on /dev/mapper/Ubuntu-swap_1. Priority:-1 extents:1 across:2711544k
[4294687.339000] EXT3 FS on dm-0, internal journal
[4294687.464000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294687.464000] md: bitmap version 4.39
[4294687.596000] NET: Registered protocol family 17
[4294688.097000] cdrom: open failed.
[4294688.809000] kjournald starting. Commit interval 5 seconds
[4294688.809000] EXT3 FS on hdb5, internal journal
[4294688.809000] EXT3-fs: mounted filesystem with ordered data mode.
[4294688.999000] usb 3-6: device not accepting address 4, error -110
[4294689.101000] usb 3-6: new high speed USB device using ehci_hcd and address 5
[4294691.536000] ACPI: Power Button (FF) [PWRF]
[4294691.536000] ACPI: Power Button (CM) [PWRB]
[4294691.634000] ibm_acpi: ec object not found
[4294692.045000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[4294692.045000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
[4294692.045000] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[4294692.045000] cpu_init done, current fid 0xa, vid 0x6
[4294697.229000] [drm] Initialized drm 1.0.0 20040925
[4294698.134000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294698.135000] apm: overridden by ACPI.
[4294698.901000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294698.901000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294698.901000] ide: failed opcode was: 0xec
[4294698.925000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294698.925000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294698.925000] ide: failed opcode was: 0xec
[4294699.083000] Bluetooth: Core ver 2.8
[4294699.083000] NET: Registered protocol family 31
[4294699.083000] Bluetooth: HCI device and connection manager initialized
[4294699.083000] Bluetooth: HCI socket layer initialized
[4294699.101000] Bluetooth: L2CAP ver 2.8
[4294699.101000] Bluetooth: L2CAP socket layer initialized
[4294700.635000] usb 3-6: device not accepting address 5, error -110
[4294700.737000] usb 3-6: new high speed USB device using ehci_hcd and address 6
[4294704.288000] NET: Registered protocol family 10
[4294704.288000] lo: Disabled Privacy Extensions
[4294704.288000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294704.288000] IPv6 over IPv4 tunneling driver
[4294711.159000] usb 3-6: device not accepting address 6, error -110
[4294711.261000] usb 3-6: new high speed USB device using ehci_hcd and address 7
[4294721.683000] usb 3-6: device not accepting address 7, error -110
[4294722.055000] usb 2-1: new full speed USB device using ohci_hcd and address 2
[4294723.055000] ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
root@fred:~#

root@fred:~# sudo ifconfig -a
eth0 Lien encap:Ethernet HWaddr 00:13:D3:0F:52:7B
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interruption:201 Adresse de base:0xa000

lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:272 (272.0 b) TX bytes:272 (272.0 b)

sit0 Lien encap:IPv6-dans-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

root@fred:~#

merci d'avance en esperant une solution

Dernière modification par quick (Le 04/04/2006, à 13:32)

quick · Le 05/04/2006, à 12:08

bon ne sachant plus quoi faire (apres avoir consulter de nombreux forum) j'ai virer le noyau 2.6.15-19 et je continue sur le 2.6.15-18 qui est pour l'intant tres stable je verais ce que me donne la prochaine mise a jour

un grand merci a vous qui avez pris sur votre temps pour repondre et m'aider

quick · Le 06/04/2006, à 14:50

re

probleme resolu apres le dl de la flight6 en ISO et réinstall voila si ca peut aider d'autres membres

ps/ peut etre que mon sources.list n'etait pas bon

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 04/04/2006, à 12:08

[resolu] carte reseau non reconnu apres mise a jour [resolu]

#2 Le 04/04/2006, à 12:35

Re : [resolu] carte reseau non reconnu apres mise a jour [resolu]

#3 Le 04/04/2006, à 12:44

Re : [resolu] carte reseau non reconnu apres mise a jour [resolu]

#4 Le 04/04/2006, à 12:50

Re : [resolu] carte reseau non reconnu apres mise a jour [resolu]

#5 Le 04/04/2006, à 12:54

Re : [resolu] carte reseau non reconnu apres mise a jour [resolu]

#6 Le 05/04/2006, à 12:08

Re : [resolu] carte reseau non reconnu apres mise a jour [resolu]

#7 Le 06/04/2006, à 14:50

Re : [resolu] carte reseau non reconnu apres mise a jour [resolu]

Pied de page des forums