Ubuntu-fr

Lydriel

Connecter un Nokia 6630 via le cable USB

Bonjours à touq !!

J'ai un Nokia 6630 et étant passé récemment sous Ubuntu, j'ai quelques problèmes, lorsque que je connecte mon portable à l'aide du cable USB, je regarder dans le Device Manager et mon portable est détecté, seulement, je ne sais pas comment acceder à mon portable, si je peut le faire simplement a l'aide de l'explorateur de fichier, ou si il me faut un logiciel specifique...

Donc ma question : Comment puis-je transferer des fichiers de mon PC vers mon portable ?

Merci pour vos futurs réponses.

---

Windows ? Pourquoi faire ?

kvb

Re : Connecter un Nokia 6630 via le cable USB

d'accord je comprend mieux ta volonté d'enviseager un lecteur de carte

normalement quand tu branches un périph usb de stockage sur ton ubuntu tu as un fenetre qui s'ouvre automatiquement sur le bureau et un joli icone sur ton bureau
voilà c'est ton simple

peut-etre il y a t il une manip a faire auprès de ton appareil

Toxxic

Re : Connecter un Nokia 6630 via le cable USB

oups !

non l'histoire du lecteur de carte c'etait moi 

Lydriel

Re : Connecter un Nokia 6630 via le cable USB

Quand je connecte mon telephone, rien ne s'affiche, aucunes réaction, pas d'icones, pas de nouvelle fenetre... Comment puis-je proceder pour résoudre mon probleme ? merci

---

Windows ? Pourquoi faire ?

Donk

Re : Connecter un Nokia 6630 via le cable USB

Que te donne la commande dmesg dans un terminal?

Lydriel

Re : Connecter un Nokia 6630 via le cable USB

Voila : (c'est un peu long lol)

lydriel@binder:~$ dmesg
e: 86000 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 GBT                                   ) @ 0x00 0f6710
[4294667.296000] ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x15ff3000
[4294667.296000] ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x15ff3040
[4294667.296000] ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x15ff6a80
[4294667.296000] ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:6 APIC version 16
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 16000000 (gap: 16000000:e8 c00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda3 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1462.879 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294671.310000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294671.311000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294671.325000] Memory: 348676k/360384k available (1416k kernel code, 11076k re served, 762k data, 224k init, 0k highmem)
[4294671.325000] Checking if this processor honours the WP bit even in superviso r mode... Ok.
[4294671.325000] Calibrating delay loop... 2899.96 BogoMIPS (lpj=1449984)
[4294671.348000] Security Framework v1.0.0 initialized
[4294671.348000] SELinux:  Disabled at boot.
[4294671.348000] Mount-cache hash table entries: 512
[4294671.348000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 0 0000000 00000000 00000000 00000000
[4294671.348000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00 000000 00000000 00000000 00000000
[4294671.348000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/lin e)
[4294671.348000] CPU: L2 Cache: 256K (64 bytes/line)
[4294671.348000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020  00000000 00000000 00000000
[4294671.348000] CPU: AMD Athlon(tm) XP 1700+ stepping 02
[4294671.348000] Enabling fast FPU save and restore... done.
[4294671.348000] Enabling unmasked SIMD FPU exception support... done.
[4294671.348000] Checking 'hlt' instruction... OK.
[4294671.352000] Checking for popad bug... OK.
[4294671.352000] checking if image is initramfs... it is
[4294671.890000] Freeing initrd memory: 5171k freed
[4294671.964000] ACPI: Looking for DSDT in initrd... not found!
[4294672.030000]  not found!
[4294672.042000] ENABLING IO-APIC IRQs
[4294672.042000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294672.153000] NET: Registered protocol family 16
[4294672.153000] EISA bus registered
[4294672.153000] ACPI: bus type pci registered
[4294672.226000] PCI: PCI BIOS revision 2.10 entry at 0xf9de0, last bus=1
[4294672.226000] PCI: Using configuration type 1
[4294672.226000] mtrr: v2.0 (20020519)
[4294672.227000] ACPI: Subsystem revision 20050729
[4294672.240000] ACPI: Interpreter enabled
[4294672.240000] ACPI: Using IOAPIC for interrupt routing
[4294672.240000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294672.240000] PCI: Probing PCI hardware (bus 00)
[4294672.240000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294672.240000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294672.243000] Boot video device is 0000:00:09.0
[4294672.267000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294672.268000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294672.269000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294672.269000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[4294672.270000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[4294672.270000] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[4294672.271000] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[4294672.271000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[4294672.272000] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
[4294672.275000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294672.275000] pnp: PnP ACPI init
[4294672.280000] pnp: PnP ACPI: found 13 devices
[4294672.280000] PnPBIOS: Disabled by ACPI PNP
[4294672.281000] PCI: Using ACPI for IRQ routing
[4294672.281000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps , post a report
[4294672.305000] audit: initializing netlink socket (disabled)
[4294672.305000] audit: initialized
[4294672.305000] VFS: Disk quotas dquot_6.5.1
[4294672.305000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.305000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294672.305000] devfs: boot_options: 0x0
[4294672.305000] Initializing Cryptographic API
[4294672.306000] isapnp: Scanning for PnP cards...
[4294672.659000] isapnp: No Plug & Play device found
[4294672.680000] PNP: PS/2 controller doesn't have KBD irq; using default 0x1
[4294672.680000] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294672.680000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.680000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.680000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ shari ng enabled
[4294672.680000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.681000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.683000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.683000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.683000] io scheduler noop registered
[4294672.683000] io scheduler anticipatory registered
[4294672.683000] io scheduler deadline registered
[4294672.683000] io scheduler cfq registered
[4294672.684000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bl ocksize
[4294672.684000] EISA: Probing bus 0 at eisa.0
[4294672.684000] Cannot allocate resource for EISA slot 4
[4294672.684000] EISA: Detected 0 cards.
[4294672.684000] NET: Registered protocol family 2
[4294672.693000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294672.693000] TCP established hash table entries: 16384 (order: 5, 131072 byt es)
[4294672.693000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294672.693000] TCP: Hash tables configured (established 16384 bind 16384)
[4294672.693000] NET: Registered protocol family 8
[4294672.693000] NET: Registered protocol family 20
[4294672.694000] ACPI wakeup devices:
[4294672.694000] SLPB PCI0 USB0 USB1 USB2 UAR1 LPT1
[4294672.694000] ACPI: (supports S0 S1 S4 S5)
[4294672.694000] Freeing unused kernel memory: 224k freed
[4294672.710000] input: AT Raw Set 2 keyboard on isa0060/serio1
[4294672.712000] vga16fb: initializing
[4294672.712000] vga16fb: mapped to 0xc00a0000
[4294672.852000] Console: switching to colour frame buffer device 80x30
[4294672.852000] fb0: VGA16 VGA frame buffer device
[4294674.057000] Capability LSM initialized
[4294674.072000] NET: Registered protocol family 1
[4294674.087000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294674.088000] ide: Assuming 33MHz system bus speed for PIO modes; override wi th idebus=xx
[4294674.088000] ACPI: bus type ide registered
[4294674.094000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294674.094000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
[4294674.094000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
[4294674.094000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (l evel, low) -> IRQ 23
[4294674.094000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 7
[4294674.094000] VP_IDE: chipset revision 6
[4294674.094000] VP_IDE: not 100% native mode: will probe irqs later
[4294674.094000] VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000: 00:11.1
[4294674.094000]     ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb: pio
[4294674.094000]     ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd: pio
[4294674.094000] Probing IDE interface ide0...
[4294674.478000] hda: Maxtor 4D040H2, ATA DISK drive
[4294675.090000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.090000] Probing IDE interface ide1...
[4294675.882000] hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
[4294676.494000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.494000] Probing IDE interface ide2...
[4294677.007000] Probing IDE interface ide3...
[4294677.519000] Probing IDE interface ide4...
[4294678.031000] Probing IDE interface ide5...
[4294678.547000] hda: max request size: 128KiB
[4294678.572000] hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/ 63, UDMA(100)
[4294678.572000] hda: cache flushes not supported
[4294678.572000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
[4294678.631000] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
[4294678.631000] Uniform CD-ROM driver Revision: 3.20
[4294678.952000] Attempting manual resume
[4294678.952000] swsusp: Suspend partition has wrong signature?
[4294679.023000] usbcore: registered new driver usbfs
[4294679.023000] usbcore: registered new driver hub
[4294679.024000] USB Universal Host Controller Interface driver v2.2
[4294679.025000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[4294679.025000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[4294679.025000] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [ALKD] -> GSI 21 (l evel, low) -> IRQ 21
[4294679.025000] uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI US B 1.1 Controller
[4294679.087000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus num ber 1
[4294679.087000] uhci_hcd 0000:00:11.2: irq 21, io base 0x0000d800
[4294679.087000] hub 1-0:1.0: USB hub found
[4294679.087000] hub 1-0:1.0: 2 ports detected
[4294679.090000] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [ALKD] -> GSI 21 (l evel, low) -> IRQ 21
[4294679.090000] uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI US B 1.1 Controller (#2)
[4294679.152000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus num ber 2
[4294679.152000] uhci_hcd 0000:00:11.3: irq 21, io base 0x0000dc00
[4294679.152000] hub 2-0:1.0: USB hub found
[4294679.152000] hub 2-0:1.0: 2 ports detected
[4294679.186000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294679.186000] 8139cp: pci dev 0000:00:13.0 (id 10ec:8139 rev 10) is not an 81 39C+ compatible chip
[4294679.186000] 8139cp: Try the "8139too" driver instead.
[4294679.188000] 8139too Fast Ethernet driver 0.9.27
[4294679.188000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> I RQ 18
[4294679.189000] eth0: RealTek RTL8139 at 0xe800, 00:20:ed:3f:c7:69, IRQ 18
[4294679.189000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294679.377000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[4294681.224000] usbcore: registered new driver hiddev
[4294681.281000] input: USB HID v1.10 Mouse [1241:1177] on usb-0000:00:11.2-2
[4294681.281000] usbcore: registered new driver usbhid
[4294681.281000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294681.768000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294681.768000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294682.039000] Attempting manual resume
[4294682.039000] swsusp: Suspend partition has wrong signature?
[4294682.061000] kjournald starting.  Commit interval 5 seconds
[4294682.061000] EXT3-fs: mounted filesystem with ordered data mode.
[4294683.789000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294688.560000] Adding 8024k swap on /dev/hda2.  Priority:-1 extents:1
[4294688.944000] EXT3 FS on hda3, internal journal
[4294698.195000] parport: PnPBIOS parport detected.
[4294698.195000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294698.281000] lp0: using parport0 (interrupt-driven).
[4294698.337000] mice: PS/2 mouse device common for all mice
[4294701.467000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@r edhat.com
[4294702.742000] cdrom: open failed.
[4294706.333000] Linux agpgart interface v0.101 (c) Dave Jones
[4294706.347000] agpgart: Detected VIA PM266/KM266 chipset
[4294706.376000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294706.514000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294706.523000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294706.523000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294706.857000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> I RQ 18
[4294707.541000] gameport: CS4281 Gameport is pci0000:00:0a.0/gameport0, speed 2 057kHz
[4294708.160000] irda_init()
[4294708.160000] NET: Registered protocol family 23
[4294708.671000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[4294708.671000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[4294708.671000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (l evel, low) -> IRQ 22
[4294708.671000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6
[4294708.671000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294711.475000] Real Time Clock Driver v1.12
[4294711.613000] input: PC Speaker
[4294711.729000] Floppy drive(s): fd0 is 1.44M
[4294711.752000] FDC 0 is a post-1991 82077
[4294712.687000] ts: Compaq touchscreen protocol output
[4294714.391000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[4294714.406000] NET: Registered protocol family 17
[4294720.740000] NET: Registered protocol family 10
[4294720.740000] Disabled Privacy Extensions on device c02eb280(lo)
[4294720.740000] IPv6 over IPv4 tunneling driver
[4294722.573000] ACPI: Power Button (FF) [PWRF]
[4294722.573000] ACPI: Power Button (CM) [PWRB]
[4294722.573000] ACPI: Sleep Button (CM) [SLPB]
[4294722.725000] ibm_acpi: ec object not found
[4294730.708000] [drm] Initialized drm 1.0.0 20040925
[4294730.717000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> I RQ 17
[4294730.724000] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Techno logies Inc Radeon RV250 If [Radeon 9000]
[4294730.750000] [drm] Loading R200 Microcode
[4294731.142000] eth0: no IPv6 routers present
[4294735.081000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294735.081000] apm: overridden by ACPI.
[4294736.568000] Bluetooth: Core ver 2.7
[4294736.568000] NET: Registered protocol family 31
[4294736.568000] Bluetooth: HCI device and connection manager initialized
[4294736.568000] Bluetooth: HCI socket layer initialized
[4294736.597000] Bluetooth: L2CAP ver 2.7
[4294736.597000] Bluetooth: L2CAP socket layer initialized
[4294736.636000] Bluetooth: RFCOMM ver 1.5
[4294736.636000] Bluetooth: RFCOMM socket layer initialized
[4294736.636000] Bluetooth: RFCOMM TTY layer initialized

---

Windows ? Pourquoi faire ?