Pages : 1
#1 Le 05/02/2009, à 19:46
- fannya76
Modem Bewan Ethernet avec abonnement Orange
Bonsoir,
J'ai installé Ubuntu avec succès depuis un live CD.
Je n'y connais pas grand chose, j'ai vu une procédure de configuration internet pour le modem Bewan Adsl Ethernet mais pour Tele2, or je suis passée chez Orange et je continue à utiliser ce modem depuis quelques années maintenant (sans problèmes).
Quelqu'un saurait-il m'indiquer la procédure dans mon cas ? N'hésitez pas à entrer dans les détails car je ne connais pas du tout Ubuntu.
Merci d'avance.
Hors ligne
#2 Le 06/02/2009, à 13:47
- fannya76
Re : Modem Bewan Ethernet avec abonnement Orange
Un petit up.
Hors ligne
#3 Le 07/02/2009, à 14:46
- fannya76
Re : Modem Bewan Ethernet avec abonnement Orange
Comme on me l'a conseillé je vous mets plus de détails :
Alors en fait, d'après l'icône représentant 2 écrans (sous Linux, dans la barre des taches du haut) je suis connectée...
sauf que rien ne marche, c'est à dire : firefox n'ouvre aucune page (j'ai tenté de mettre "détection automatique du proxy" dans les réglages de firefox, sans succès) ; pidgin n'arrive pas non plus à me connecter, ni evolution.
J'ai essayé de suivre des procédures trouvé dans l'aide Ubuntu, celle concernant la connexion par pppoe :
dans le terminal j'ai tapé pppoeconf, au final, j'ai un message qui dit en gros que ça ne marche pas
je n'ai pas de soucis avec les câbles.
A tout hasard, j'ai quand même essayé la commande indiqué pour lancer la connexion via le terminal, il s'est mis à m'afficher plein de symboles pendant au moins 5mn, résultat : pas de connexion.
Hors ligne
#4 Le 07/02/2009, à 16:44
- fannya76
Re : Modem Bewan Ethernet avec abonnement Orange
Oups j'avais pas vu ceci :
http://doc.ubuntu-fr.org/modem_pppoe
J'ai suivi la procédure pour le cas où il ne détecte pas le concentrateur, au final, à la dernière commande pour lancer la connexion; il me met :
plugin rp-pppoe.so loaded
mais je n'ai pas de connexion malgré tout.
si quelqu'un a une idée...
Hors ligne
#5 Le 08/02/2009, à 12:34
- fannya76
Re : Modem Bewan Ethernet avec abonnement Orange
Salut Daria, (si vous n'êtes pas Daria, votre aide est tout de même la bienvenue )
Sur ton conseil, j'ai débranché mon modem, lancé Ubuntu puis rebranché le modem. L'icône de connexion me dit alors que je suis connectée et pourtant :
J'ai essayé Auto Ethernet sans succès non plus. J'ai bien sûr essayé de lancer diverses adresses internet. Voici ce que j'ai en clic droit sur l'icône de connexion :
"Enable Networking" est bien coché.
Voici ce que me donne ifconfig :
pour moi c'est du charabia
Voici ce que me donne lsmod, bonne lecture :
fanny@ubuntu:~$ lsmod
Module Size Used by
ipv6 263972 10
af_packet 25728 2
binfmt_misc 16904 1
radeon 147616 2
drm 86056 3 radeon
bridge 56980 0
stp 10628 1 bridge
rfcomm 44432 2
bnep 20480 2
sco 18308 2
l2cap 30464 16 rfcomm,bnep
ppdev 15620 0
powernow_k8 22148 0
cpufreq_stats 13188 0
cpufreq_ondemand 14988 1
cpufreq_powersave 9856 0
freq_table 12672 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 11396 0
cpufreq_conservative 14600 0
video 25104 0
output 11008 1 video
sbs 19464 0
sbshc 13440 1 sbs
pci_slot 12552 0
container 11520 0
wmi 14504 0
battery 18436 0
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
ac 12292 0
sbp2 29324 0
lp 17156 0
saa7134_alsa 20000 0
evdev 17696 6
pcspkr 10624 0
psmouse 45200 0
serio_raw 13444 0
snd_usb_audio 89728 1
snd_usb_lib 24192 1 snd_usb_audio
snd_hwdep 15236 1 snd_usb_audio
tda827x 17796 1
snd_seq_dummy 10884 0
tda8290 20868 1
snd_atiixp 24204 3
snd_ac97_codec 111652 1 snd_atiixp
k8temp 12416 0
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
tuner 33096 0
snd_seq_oss 38528 0
snd_seq_midi 14336 0
snd_rawmidi 29824 2 snd_usb_lib,snd_seq_midi
snd_pcm 83204 5 saa7134_alsa,snd_usb_audio,snd_atiixp,snd_ac97_codec,snd_pcm_oss
btusb 19736 3
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
saa7134 147284 1 saa7134_alsa
bluetooth 61924 11 rfcomm,bnep,sco,l2cap,btusb
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_timer 29960 2 snd_pcm,snd_seq
snd_page_alloc 16136 2 snd_atiixp,snd_pcm
snd 63268 21 saa7134_alsa,snd_usb_audio,snd_hwdep,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_pcm,snd_seq,snd_seq_device,snd_timer
sn9c102 149124 0
ir_common 48132 1 saa7134
soundcore 15328 1 snd
videodev 41344 3 tuner,saa7134,sn9c102
v4l1_compat 22404 1 videodev
compat_ioctl32 9344 1 saa7134
v4l2_common 19840 2 tuner,saa7134
videobuf_dma_sg 20612 2 saa7134_alsa,saa7134
videobuf_core 26628 2 saa7134,videobuf_dma_sg
tveeprom 20228 1 saa7134
parport_pc 39204 1
parport 42604 3 ppdev,lp,parport_pc
i2c_piix4 16144 0
button 14224 0
i2c_core 31892 7 tda827x,tda8290,tuner,saa7134,v4l2_common,tveeprom,i2c_piix4
ati_agp 14988 0
shpchp 37908 0
pci_hotplug 35236 1 shpchp
agpgart 42184 2 drm,ati_agp
ext3 133256 1
jbd 55444 1 ext3
mbcache 16004 1 ext3
loop 23180 2
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42264 4
crc_t10dif 9984 1 sd_mod
sg 39732 0
usb_storage 81728 1
libusual 27156 1 usb_storage
ata_generic 12932 0
sata_sil 15752 0
8139cp 27520 0
pata_atiixp 12800 1
ohci1394 37936 0
pata_acpi 12160 0
ohci_hcd 31888 0
ieee1394 96324 2 sbp2,ohci1394
8139too 31616 0
mii 13440 2 8139cp,8139too
ehci_hcd 43276 0
libata 177312 4 ata_generic,sata_sil,pata_atiixp,pata_acpi
usbcore 148848 9 snd_usb_audio,snd_usb_lib,btusb,sn9c102,usb_storage,libusual,ohci_hcd,ehci_hcd
scsi_mod 155212 6 sbp2,sr_mod,sd_mod,sg,usb_storage,libata
dock 16656 1 libata
thermal 23708 0
processor 42156 2 powernow_k8,thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 7
fanny@ubuntu:~$
Toujours du charabia pour moi
J'avais également fait un scanmodem (procédure trouvée dans l'aide ubuntu), voici le screenshot (je ne sais pas s'il est utile) suivi du résultat (modemdata.txt, la encore, bonne lecture!) :
ModemData :
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-7-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of: 2009_02_04
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 045e:00f5 Microsoft Corp. LifeCam VX-3000.
ID 0d49:7410 Maxtor
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
ID 04cf:8819 Myson Century, Inc.
ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress 200G Series]
02:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 80)
------------------------------------------------
with USB and bridge devices not displayed.
If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it.
Try with Root permission
$ sudo wvdialconf /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
sudo gedit /etc/wvdial.conf
will be able to dial out with Root permission:
sudo wvdial
Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems
If the above tests fail, please provide any independent information available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-7-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273064 2008-10-16 03:51 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Avec tout ça, je devrais te retrouver dans un mois
A bientôt !
Dernière modification par fannya76 (Le 08/02/2009, à 12:43)
Hors ligne
#6 Le 17/02/2009, à 17:51
- fannya76
Re : Modem Bewan Ethernet avec abonnement Orange
Sniff ! Bon ben, je verrais quand je pourrais prendre une box...
Hors ligne
Pages : 1