Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2 3 4 5 6 7

#101 Le 12/06/2025, à 12:11

iznobe

Re : Impossible d'ouvrir un disque dur externe

montre :

sudo umount -v   /dev/sdb1
sudo fsck -fyv /dev/sdb1
udisksctl  mount -b /dev/sdb1

Seul des Mises A Jour  de windobz peuvent parfois reactiver le demarrrage rapide et / ou l ' hibernation .
Tu cliques bien sur " ejecter le disque en toute securité avant de deconnecter le disque , meme sous windobz ?

retour COMPLET et utilisable de commande  |  script montage partitions

MSI Z490A-pro , i7 10700 , 32 GB RAM .

En ligne

#102 Le 12/06/2025, à 12:14

stl1811

Re : Impossible d'ouvrir un disque dur externe

iznobe a écrit :

montre :

sudo umount -v   /dev/sdb1
sudo fsck -fyv /dev/sdb1
udisksctl  mount -b /dev/sdb1

Seul des Mises A Jour  de windobz peuvent parfois reactiver le demarrrage rapide et / ou l ' hibernation .
Tu cliques bien sur " ejecter le disque en toute securité avant de deconnecter le disque , meme sous windobz ?


Bonjour Iznobe;

Voici les réponses

user@user-hplaptop15dw1xxx:~$ sudo umount -v   /dev/sdb1
umount: /media/user/USB4TO (/dev/sdb1) unmounted
user@user-hplaptop15dw1xxx:~$ sudo fsck -fyv /dev/sdb1
fsck from util-linux 2.39.3
Usage: fsck.exfat
        -r | --repair        Repair interactively
        -y | --repair-yes    Repair without ask
        -n | --repair-no     No repair
        -p | --repair-auto   Repair automatically
        -a                   Repair automatically
        -b | --ignore-bad-fs Try to recover even if exfat is not found
        -s | --rescue        Assign orphaned clusters to files
        -V | --version       Show version
        -v | --verbose       Print debug
        -h | --help          Show help
user@user-hplaptop15dw1xxx:~$ udisksctl  mount -b /dev/sdb1
Mounted /dev/sdb1 at /media/user/USB4TO

Hors ligne

#103 Le 12/06/2025, à 12:16

iznobe

Re : Impossible d'ouvrir un disque dur externe

sudo fsck.exfat -yv /dev/sdb1

retour COMPLET et utilisable de commande  |  script montage partitions

MSI Z490A-pro , i7 10700 , 32 GB RAM .

En ligne

#104 Le 12/06/2025, à 12:18

stl1811

Re : Impossible d'ouvrir un disque dur externe

iznobe a écrit :
sudo fsck.exfat -yv /dev/sdb1

Voici la réponse

user@user-hplaptop15dw1xxx:~$ sudo fsck.exfat -yv /dev/sdb1
exfatprogs version : 1.2.2
label: USB4TO
sector size:  512.00 B
cluster size: 128.00 KB
volume size:  3.63 TB
/dev/sdb1: clean. directories 26, files 378

Hors ligne

#105 Le 12/06/2025, à 12:46

geole

Re : Impossible d'ouvrir un disque dur externe

stl1811 a écrit :

geole a écrit :

et si pas de message d erreur, tu pourras dupliquer. La commande devrait être

if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi

Pour le deuxième, je n'ai eu aucune réponse, mais c'est peut-être normal?

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
           echo a > /media/$USER/USB4TO/a.txt
   else  
           echo disque de sauvegarde non monté.
fi

Et pour le dernier, voici le message

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi 
sending incremental file list
rsync: [sender] change_dir "/media/user/9858666A586646DA" failed: No such file or directory (2)

Number of files: 0
Number of created files: 0
Number of deleted files: 0
Number of regular files transferred: 0
Total file size: 0 bytes
Total transferred file size: 0 bytes
Literal data: 0 bytes
Matched data: 0 bytes
File list size: 0
File list generation time: 0,001 seconds
File list transfer time: 0,000 seconds
Total bytes sent: 19
Total bytes received: 12

sent 19 bytes  received 12 bytes  62,00 bytes/sec
total size is 0  speedup is 0,00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1338) [sender=3.2.7]

Sommes-nous sur le bon chemin?

Donc il n'y pas eu de message d'erreur sur le point 2
Pour le point trois, j'ai du me tromper sur le nom de la partition émettrice, ou tu ne l'avais pas montée.
Pour refaire le point, redonne

lsblk -fe7

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity

Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#106 Le 12/06/2025, à 12:51

stl1811

Re : Impossible d'ouvrir un disque dur externe

geole a écrit :
stl1811 a écrit :

geole a écrit :

et si pas de message d erreur, tu pourras dupliquer. La commande devrait être

if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi

Pour le deuxième, je n'ai eu aucune réponse, mais c'est peut-être normal?

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
           echo a > /media/$USER/USB4TO/a.txt
   else  
           echo disque de sauvegarde non monté.
fi

Et pour le dernier, voici le message

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi 
sending incremental file list
rsync: [sender] change_dir "/media/user/9858666A586646DA" failed: No such file or directory (2)

Number of files: 0
Number of created files: 0
Number of deleted files: 0
Number of regular files transferred: 0
Total file size: 0 bytes
Total transferred file size: 0 bytes
Literal data: 0 bytes
Matched data: 0 bytes
File list size: 0
File list generation time: 0,001 seconds
File list transfer time: 0,000 seconds
Total bytes sent: 19
Total bytes received: 12

sent 19 bytes  received 12 bytes  62,00 bytes/sec
total size is 0  speedup is 0,00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1338) [sender=3.2.7]

Sommes-nous sur le bon chemin?

Donc il n'y pas eu de message d'erreur sur le point 2
Pour le point trois, j'ai du me tromper sur le nom de la partition émettrice, ou tu ne l'avais pas montée.
Pour refaire le point, redonne

lsblk -fe7

Voici, voici

user@user-hplaptop15dw1xxx:~$ lsblk -fe7
NAME        FSTYPE    FSVER LABEL  UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda                                                                                    
└─sda1      ntfs                   9858666A586646DA                        160G    83% /media/user/9858666A586646DA
sdb                                                                                    
└─sdb1      exfat     1.0   USB4TO EA49-71BF                                           
nvme0n1                                                                                
├─nvme0n1p1 vfat      FAT32        C427-6E1E                                           
├─nvme0n1p2                                                                            
├─nvme0n1p3 BitLocker 2                                                                
├─nvme0n1p4 ext4      1.0          caa9f86d-53ae-4f01-946b-fe4ca27bfd23  155,2G    13% /
├─nvme0n1p5 ntfs                   C8C879CCC879B8F0                                    
└─nvme0n1p6 vfat      FAT32        8034-A349                             991,9M     1% /boot/efi

Hors ligne

#107 Le 12/06/2025, à 13:14

geole

Re : Impossible d'ouvrir un disque dur externe

Il semble que je ne me sois pas trompé  vu le retour que tu donnes.
Mais on y voit que le disque de sortie n est plus monté.
Il faut que les deux partitions soient montées au même moment pour que la copie puisse se faire.

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity

Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#108 Le 12/06/2025, à 13:23

stl1811

Re : Impossible d'ouvrir un disque dur externe

geole a écrit :

Il semble que je ne me sois pas trompé  vu le retour que tu donnes.
Mais on y voit que le disque de sortie n est plus monté.
Il faut que les deux partitions soient montées au même moment pour que la copie puisse se faire.


Le deuxième disque se démonte seul à chaque fois en fait. Je le monte, je fais la commande et il se me donne la même réponse

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi
sending incremental file list
InDesign_14_LS20_Win64.zip
    475.299.840  45%   28,79MB/s    0:00:18  rsync: [receiver] write failed on "/media/user/USB4TO/InDesign_14_LS20_Win64.zip": Input/output error (5)
rsync error: error in file IO (code 11) at receiver.c(381) [receiver=3.2.7]
    511.016.960  49%   24,80MB/s    0:00:20  
rsync: [sender] write error: Broken pipe (32)

Hors ligne

#109 Le 12/06/2025, à 13:26

stl1811

Re : Impossible d'ouvrir un disque dur externe

stl1811 a écrit :
geole a écrit :
stl1811 a écrit :

Pour le deuxième, je n'ai eu aucune réponse, mais c'est peut-être normal?

if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi

Et pour le dernier, voici le message

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
           echo a > /media/$USER/USB4TO/a.txt
   else  
           echo disque de sauvegarde non monté.
fi

Sommes-nous sur le bon chemin?

Donc il n'y pas eu de message d'erreur sur le point 2
Pour le point trois, j'ai du me tromper sur le nom de la partition émettrice, ou tu ne l'avais pas montée.
Pour refaire le point, redonne

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi 
sending incremental file list
rsync: [sender] change_dir "/media/user/9858666A586646DA" failed: No such file or directory (2)

Number of files: 0
Number of created files: 0
Number of deleted files: 0
Number of regular files transferred: 0
Total file size: 0 bytes
Total transferred file size: 0 bytes
Literal data: 0 bytes
Matched data: 0 bytes
File list size: 0
File list generation time: 0,001 seconds
File list transfer time: 0,000 seconds
Total bytes sent: 19
Total bytes received: 12

sent 19 bytes  received 12 bytes  62,00 bytes/sec
total size is 0  speedup is 0,00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1338) [sender=3.2.7]

Voici, voici

lsblk -fe7

Et pour l'autre code avec le USB4TO branché, voici la réponse

user@user-hplaptop15dw1xxx:~$ lsblk -fe7
NAME        FSTYPE    FSVER LABEL  UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda                                                                                    
└─sda1      ntfs                   9858666A586646DA                        160G    83% /media/user/9858666A586646DA
sdb                                                                                    
└─sdb1      exfat     1.0   USB4TO EA49-71BF                                           
nvme0n1                                                                                
├─nvme0n1p1 vfat      FAT32        C427-6E1E                                           
├─nvme0n1p2                                                                            
├─nvme0n1p3 BitLocker 2                                                                
├─nvme0n1p4 ext4      1.0          caa9f86d-53ae-4f01-946b-fe4ca27bfd23  155,2G    13% /
├─nvme0n1p5 ntfs                   C8C879CCC879B8F0                                    
└─nvme0n1p6 vfat      FAT32        8034-A349                             991,9M     1% /boot/efi
user@user-hplaptop15dw1xxx:~$ lsblk -fe7
NAME        FSTYPE    FSVER LABEL  UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda                                                                                    
└─sda1      ntfs                   9858666A586646DA                        160G    83% /media/user/9858666A586646DA
sdb                                                                                    
└─sdb1      exfat     1.0   USB4TO EA49-71BF                               3,6T     0% /media/user/USB4TO
nvme0n1                                                                                
├─nvme0n1p1 vfat      FAT32        C427-6E1E                                           
├─nvme0n1p2                                                                            
├─nvme0n1p3 BitLocker 2                                                                
├─nvme0n1p4 ext4      1.0          caa9f86d-53ae-4f01-946b-fe4ca27bfd23  155,2G    13% /
├─nvme0n1p5 ntfs                   C8C879CCC879B8F0                                    
└─nvme0n1p6 vfat      FAT32        8034-A349                             991,9M     1% /boot/efi
user@user-hplaptop15dw1xxx:~$ 
::1                    ip6-allnodes           ip6-loopback           
ff02::1                ip6-allrouters         localhost              
ff02::2                ip6-localhost          user-hplaptop15dw1xxx

Hors ligne

#110 Le 12/06/2025, à 13:29

stl1811

Re : Impossible d'ouvrir un disque dur externe

stl1811 a écrit :
stl1811 a écrit :
geole a écrit :

Donc il n'y pas eu de message d'erreur sur le point 2
Pour le point trois, j'ai du me tromper sur le nom de la partition émettrice, ou tu ne l'avais pas montée.
Pour refaire le point, redonne

if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi

Voici, voici

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
           echo a > /media/$USER/USB4TO/a.txt
   else  
           echo disque de sauvegarde non monté.
fi

Et pour l'autre code avec le USB4TO branché, voici la réponse

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi 
sending incremental file list
rsync: [sender] change_dir "/media/user/9858666A586646DA" failed: No such file or directory (2)

Number of files: 0
Number of created files: 0
Number of deleted files: 0
Number of regular files transferred: 0
Total file size: 0 bytes
Total transferred file size: 0 bytes
Literal data: 0 bytes
Matched data: 0 bytes
File list size: 0
File list generation time: 0,001 seconds
File list transfer time: 0,000 seconds
Total bytes sent: 19
Total bytes received: 12

sent 19 bytes  received 12 bytes  62,00 bytes/sec
total size is 0  speedup is 0,00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1338) [sender=3.2.7]
lsblk -fe7

Par contre, des copies ont été faites du premier disque au deuxième, mais les dossiers sont vides neutral

user@user-hplaptop15dw1xxx:~$ lsblk -fe7
NAME        FSTYPE    FSVER LABEL  UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda                                                                                    
└─sda1      ntfs                   9858666A586646DA                        160G    83% /media/user/9858666A586646DA
sdb                                                                                    
└─sdb1      exfat     1.0   USB4TO EA49-71BF                                           
nvme0n1                                                                                
├─nvme0n1p1 vfat      FAT32        C427-6E1E                                           
├─nvme0n1p2                                                                            
├─nvme0n1p3 BitLocker 2                                                                
├─nvme0n1p4 ext4      1.0          caa9f86d-53ae-4f01-946b-fe4ca27bfd23  155,2G    13% /
├─nvme0n1p5 ntfs                   C8C879CCC879B8F0                                    
└─nvme0n1p6 vfat      FAT32        8034-A349                             991,9M     1% /boot/efi

Hors ligne

#111 Le 12/06/2025, à 13:47

geole

Re : Impossible d'ouvrir un disque dur externe

stl1811 a écrit :

Le deuxième disque se démonte seul à chaque fois en fait. Je le monte, je fais la commande et il  me donne la même réponse

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi
sending incremental file list
InDesign_14_LS20_Win64.zip
    475.299.840  45%   28,79MB/s    0:00:18  rsync: [receiver] write failed on "/media/user/USB4TO/InDesign_14_LS20_Win64.zip": Input/output error (5)
rsync error: error in file IO (code 11) at receiver.c(381) [receiver=3.2.7]
    511.016.960  49%   24,80MB/s    0:00:20  
rsync: [sender] write error: Broken pipe (32)

Cela se casse la figure à 49% de la copie du premier fichier......
- Donne

 journalctl --no-pager -b -g sdb -n 100

- Installe l application smartmontools
- Donne l état du disque

sudo smartctl -s on -a /dev/sdb

Dernière modification par geole (Le 12/06/2025, à 13:54)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity

Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#112 Le 12/06/2025, à 13:50

stl1811

Re : Impossible d'ouvrir un disque dur externe

geole a écrit :
stl1811 a écrit :

Le deuxième disque se démonte seul à chaque fois en fait. Je le monte, je fais la commande et il  me donne la même réponse

user@user-hplaptop15dw1xxx:~$ if  mountpoint -q /media/$USER/USB4TO
   then
            rsync -a -v  --progress --stats /media/user/9858666A586646DA/*     /media/$USER/USB4TO
   else  
           echo disque de sauvegarde non monté.
fi
sending incremental file list
InDesign_14_LS20_Win64.zip
    475.299.840  45%   28,79MB/s    0:00:18  rsync: [receiver] write failed on "/media/user/USB4TO/InDesign_14_LS20_Win64.zip": Input/output error (5)
rsync error: error in file IO (code 11) at receiver.c(381) [receiver=3.2.7]
    511.016.960  49%   24,80MB/s    0:00:20  
rsync: [sender] write error: Broken pipe (32)

Cela se casse la figure à 45% de la copie du premier fichier......
donne

 journalctl --no-pager -b -g sdb -n 100

Voici la réponse

user@user-hplaptop15dw1xxx:~$ journalctl --no-pager -b -g sdb -n 100
jun 12 13:24:16 user-hplaptop15dw1xxx udisksd[947]: Mounted /dev/sdb1 at /media/user/USB4TO on behalf of uid 1000
jun 12 13:24:14 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
jun 12 13:18:36 user-hplaptop15dw1xxx (udev-worker)[8160]: sdb1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdb1' failed with exit code 1.
jun 12 13:18:36 user-hplaptop15dw1xxx udisksd[947]: Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdb': Unexpected sense data returned:
                                                    0000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................
                                                    0010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................
                                                     (g-io-error-quark, 0)
jun 12 13:18:36 user-hplaptop15dw1xxx (udev-worker)[8187]: sdb: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdb' failed with exit code 1.
jun 12 13:18:35 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
jun 12 13:18:35 user-hplaptop15dw1xxx kernel:  sdb: sdb1
jun 12 13:18:35 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
jun 12 13:18:35 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
jun 12 13:18:35 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Write Protect is off
jun 12 13:18:35 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks
jun 12 13:18:35 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] 7814037164 512-byte logical blocks: (4.00 TB/3.64 TiB)
jun 12 13:18:35 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Synchronizing SCSI cache
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2288, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2287, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2286, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2285, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2284, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2283, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2282, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2281, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2280, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 2279, lost async page write
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): error, failed to bmap (inode : 00000000c92992d8 iblock : 997376, err : -5)
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): Filesystem has been set read-only
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): error, failed to bmap (inode : 00000000c92992d8 iblock : 997376, err : -5)
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7480704 op 0x1:(WRITE) flags 0x104000 phys_seg 8 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7480464 op 0x1:(WRITE) flags 0x104000 phys_seg 9 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7480224 op 0x1:(WRITE) flags 0x104000 phys_seg 8 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7479984 op 0x1:(WRITE) flags 0x104000 phys_seg 9 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7479744 op 0x1:(WRITE) flags 0x104000 phys_seg 8 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7479504 op 0x1:(WRITE) flags 0x104000 phys_seg 9 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7479264 op 0x1:(WRITE) flags 0x104000 phys_seg 8 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7479024 op 0x1:(WRITE) flags 0x104000 phys_seg 8 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 4344 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
jun 12 13:18:33 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7478784 op 0x1:(WRITE) flags 0x104000 phys_seg 8 prio class 0
jun 12 13:18:04 user-hplaptop15dw1xxx udisksd[947]: Mounted /dev/sdb1 at /media/user/USB4TO on behalf of uid 1000
jun 12 13:18:03 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
jun 12 13:17:30 user-hplaptop15dw1xxx (udev-worker)[7972]: sdb1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdb1' failed with exit code 1.
jun 12 13:17:30 user-hplaptop15dw1xxx udisksd[947]: Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdb': Unexpected sense data returned:
                                                    0000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................
                                                    0010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................
                                                     (g-io-error-quark, 0)
jun 12 13:17:30 user-hplaptop15dw1xxx (udev-worker)[8023]: sdb: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdb' failed with exit code 1.
jun 12 13:17:30 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
jun 12 13:17:30 user-hplaptop15dw1xxx kernel:  sdb: sdb1
jun 12 13:17:30 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
jun 12 13:17:30 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
jun 12 13:17:30 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Write Protect is off
jun 12 13:17:30 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks
jun 12 13:17:30 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] 7814037164 512-byte logical blocks: (4.00 TB/3.64 TiB)
jun 12 13:17:30 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Synchronizing SCSI cache
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7312000 op 0x1:(WRITE) flags 0x104000 phys_seg 240 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7322608 op 0x1:(WRITE) flags 0x0 phys_seg 2 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7311760 op 0x1:(WRITE) flags 0x104000 phys_seg 240 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7322368 op 0x1:(WRITE) flags 0x4000 phys_seg 30 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7311520 op 0x1:(WRITE) flags 0x104000 phys_seg 240 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7311280 op 0x1:(WRITE) flags 0x104000 phys_seg 240 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): error, failed to bmap (inode : 0000000041170ed1 iblock : 145408, err : -5)
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 4318 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7311040 op 0x1:(WRITE) flags 0x104000 phys_seg 240 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): Filesystem has been set read-only
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): error, failed to bmap (inode : 0000000041170ed1 iblock : 145408, err : -5)
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 4318 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308761, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308760, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308759, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308758, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308757, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308756, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308755, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308754, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308753, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: Buffer I/O error on dev sdb1, logical block 7308752, lost async page write
jun 12 13:17:27 user-hplaptop15dw1xxx kernel: device offline error, dev sdb, sector 7310800 op 0x1:(WRITE) flags 0x104000 phys_seg 240 prio class 0
jun 12 13:15:39 user-hplaptop15dw1xxx udisksd[947]: Mounted /dev/sdb1 at /media/user/USB4TO on behalf of uid 1000
jun 12 12:17:20 user-hplaptop15dw1xxx sudo[4926]:     user : TTY=pts/1 ; PWD=/home/user ; USER=root ; COMMAND=/usr/sbin/fsck.exfat -yv /dev/sdb1
jun 12 12:13:33 user-hplaptop15dw1xxx sudo[4745]:     user : TTY=pts/1 ; PWD=/home/user ; USER=root ; COMMAND=/usr/bin/umount -v /dev/sdb1
jun 12 12:13:05 user-hplaptop15dw1xxx udisksd[947]: Mounted /dev/sdb1 at /media/user/USB4TO on behalf of uid 1000
jun 12 12:13:03 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
jun 12 12:12:52 user-hplaptop15dw1xxx sudo[4649]:     user : TTY=pts/1 ; PWD=/home/user ; USER=root ; COMMAND=/usr/sbin/fsck -fyv /dev/sdb1
jun 12 12:12:39 user-hplaptop15dw1xxx sudo[4644]:     user : TTY=pts/1 ; PWD=/home/user ; USER=root ; COMMAND=/usr/bin/umount -v /dev/sdb1
jun 12 11:59:29 user-hplaptop15dw1xxx udisksd[947]: Mounted /dev/sdb1 at /media/user/USB4TO on behalf of uid 1000
jun 12 11:59:27 user-hplaptop15dw1xxx kernel: exFAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
jun 12 11:59:04 user-hplaptop15dw1xxx sudo[3753]:     user : TTY=pts/1 ; PWD=/home/user ; USER=root ; COMMAND=/usr/sbin/fsck -fyv /dev/sdb1
jun 12 11:58:20 user-hplaptop15dw1xxx sudo[3705]:     user : TTY=pts/1 ; PWD=/home/user ; USER=root ; COMMAND=/usr/bin/umount -v /media/dev/sdb1
jun 12 11:48:29 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.TOSHIBA_MQ04UBB400-Y4HET0MTT.ata.state
jun 12 11:48:29 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 10 Spin_Retry_Count changed from 100 to 101
jun 12 11:48:28 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.TOSHIBA_MQ04UBB400-Y4HET0MTT.ata.state
jun 12 11:48:28 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
jun 12 11:48:28 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], no ATA CHECK POWER STATUS support, ignoring -n Directive
jun 12 11:48:28 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], not capable of SMART Health Status check
jun 12 11:48:28 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], not found in smartd database 7.3/5528.
jun 12 11:48:28 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], TOSHIBA MQ04UBB400, S/N:Y4HET0MTT, WWN:0-000000-000000000, FW:JS0B0U, 4.00 TB
jun 12 11:48:28 user-hplaptop15dw1xxx smartd[931]: Device: /dev/sdb [SAT], opened
jun 12 11:48:28 user-hplaptop15dw1xxx udisksd[947]: Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdb': Unexpected sense data returned:
                                                    0000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................
                                                    0010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................
                                                     (g-io-error-quark, 0)
jun 12 11:48:27 user-hplaptop15dw1xxx (udev-worker)[415]: sdb1: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdb1' failed with exit code 1.
jun 12 11:48:27 user-hplaptop15dw1xxx (udev-worker)[418]: sdb: Process '/usr/bin/unshare -m /usr/bin/snap auto-import --mount=/dev/sdb' failed with exit code 1.
jun 12 11:48:27 user-hplaptop15dw1xxx kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
user@user-hplaptop15dw1xxx:~$ 
::1                    ip6-allnodes           ip6-loopback           
ff02::1                ip6-allrouters         localhost              
ff02::2                ip6-localhost          user-hplaptop15dw1xxx  
user@user-hplaptop15dw1xxx:~$

Hors ligne

#113 Le 12/06/2025, à 13:59

geole

Re : Impossible d'ouvrir un disque dur externe

- Installe l application smartmontools
- Donne l état du disque

sudo smartctl -s on -a /dev/sdb

Si le disque est branché sur l adaptateur, celui-ci est-il certifié pour un disque de 4 TO?

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity

Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#114 Le 12/06/2025, à 14:06

stl1811

Re : Impossible d'ouvrir un disque dur externe

geole a écrit :

- Installe l application smartmontools
- Donne l état du disque

sudo smartctl -s on -a /dev/sdb

Si le disque est branché sur l adaptateur, celui-ci est-il certifié pour un disque de 4 TO?

Le disque est branché sur le HUB et est certifié 4TO
Par contre, l'application que tu m'as donné, dois-je faire le point 1.2 Pour une installation en mode dépannage sur une clé USB non-persistante?
Il y a pas mal d'utilisation, je voudrais savoir laquelle ou lesquelles je dois installer

Dernière modification par stl1811 (Le 12/06/2025, à 14:23)

Hors ligne

#115 Le 12/06/2025, à 14:22

geole

Re : Impossible d'ouvrir un disque dur externe

Tu peux mettre directement dans le NVME   avec le ubuntu tel qu il fonctionne actuellement  aussi avec cette commande

sudo apt-get install --no-install-recommends smartmontools

Dernière modification par geole (Le 12/06/2025, à 14:24)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity

Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#116 Le 12/06/2025, à 14:26

stl1811

Re : Impossible d'ouvrir un disque dur externe

geole a écrit :

Tu peux mettre directement dans le NVME   avec le ubuntu tel qu il fonctionne actuellement  aussi avec cette commande

sudo apt-get install --no-install-recommends smartmontools

Pardon NVME c'est quoi?
Mais le code, je l'avais vu sur le site, je voulais m'assurer qu'il fallait l'installer avant de faire des bêtises.
Ils parlent aussi d'autres applications, dois-je en installer d'autres?
Pardon pour toutes ces questions roll:|

Hors ligne

#117 Le 12/06/2025, à 14:27

stl1811

Re : Impossible d'ouvrir un disque dur externe

stl1811 a écrit :
geole a écrit :

- Installe l application smartmontools
- Donne l état du disque

sudo smartctl -s on -a /dev/sdb

Si le disque est branché sur l adaptateur, celui-ci est-il certifié pour un disque de 4 TO?

Le disque est branché sur le HUB et est certifié 4TO
Par contre, l'application que tu m'as donné, dois-je faire le point 1.2 Pour une installation en mode dépannage sur une clé USB non-persistante?
Il y a pas mal d'utilisation, je voudrais savoir laquelle ou lesquelles je dois installer


Voici la réponse

user@user-hplaptop15dw1xxx:~$ sudo smartctl -s on -a /dev/sdb
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-60-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA MQ04UBB400
Serial Number:    Y4HET0MTT
LU WWN Device Id: 0 000000 000000000
Firmware Version: JS0B0U
User Capacity:    4.000.787.030.016 bytes [4,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Zoned Device:     Device managed zones
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jun 12 14:26:46 2025 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 660) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       5597
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       92
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       7
 10 Spin_Retry_Count        0x0033   101   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       64
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       33
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       152
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       31 (Min/Max 24/33)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       20
222 Loaded_Hours            0x0032   100   100   000    Old_age   Always       -       0
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       276
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more

Et les deux disques sont bien branchés et visibles

Dernière modification par stl1811 (Le 12/06/2025, à 14:28)

Hors ligne

#118 Le 12/06/2025, à 14:36

geole

Re : Impossible d'ouvrir un disque dur externe

Le disque n a aucun problème.
Si ton adaptateur est certifié, il faut regarder du coté du branchement ( Faux-contact câble USB ?)


D autre part  le logiciel ubuntu est installé dans un disque NVME

user@user-hplaptop15dw1xxx:~$ lsblk -fe7
NAME        FSTYPE    FSVER LABEL  UUID                                 FSAVAIL FSUSE% MOUNTPOINTS                                        
nvme0n1                                                                                
├─nvme0n1p1 vfat      FAT32        C427-6E1E                                                                                                         
├─nvme0n1p4 ext4      1.0          caa9f86d-53ae-4f01-946b-fe4ca27bfd23  155,2G    13% /

Dernière modification par geole (Le 12/06/2025, à 14:39)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity

Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#119 Le 12/06/2025, à 15:22

iznobe

Re : Impossible d'ouvrir un disque dur externe

...


192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       33
...

Pour un disque qui a démarré 92 fois , c' est absolument énorme .

le HuB à l' air bien moisi .
il n ' y a pas moyen de brancher le disque directement a l ' ordinateur et de faire un test de copue de n ' importe quoi , histoire de voir si sans le HUB , ca se passe bien ???

retour COMPLET et utilisable de commande  |  script montage partitions

MSI Z490A-pro , i7 10700 , 32 GB RAM .

En ligne

#120 Le 12/06/2025, à 17:38

steph810

Re : Impossible d'ouvrir un disque dur externe

Bonjour,
essaie de monitor les port usb voir s'il y as parfois des deconnexions, ouvrez plusieurs terminal et dans chacun entrer ces commandes:

udevadm monitor | grep usb
journalctl -f | grep usb
sudo dmesg -C
sudo dmesg -f kern,syslog,daemon -T -w
watch interval=0.25 lsblk -S
watch interval=0.25 lsblk -fe7

Dernière modification par steph810 (Le 12/06/2025, à 17:41)

Hors ligne

#121 Le 13/06/2025, à 17:00

stl1811

Re : Impossible d'ouvrir un disque dur externe

iznobe a écrit :
...


192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       33
...

Pour un disque qui a démarré 92 fois , c' est absolument énorme .

le HuB à l' air bien moisi .
il n ' y a pas moyen de brancher le disque directement a l ' ordinateur et de faire un test de copue de n ' importe quoi , histoire de voir si sans le HUB , ca se passe bien ???

Bonjour Iznobe,

Pardon de mon manque de réaction, j'étais en voyage. Je veux bien, mais avec tous ces codes, je m'y perds, pardon, peux-tu me rappeler quelle commande demander quand j'ai branché le disque en direct?

Hors ligne

#122 Le 13/06/2025, à 17:13

iznobe

Re : Impossible d'ouvrir un disque dur externe

Salut , il n ' y a pas de commande à faire speciale .

tu prend tout ton tas de fichiers a sauvegarder ( par exemple ) puis tu fais copier .
tu ouvre le dossier : " /media/user/USB4TO " , puis tu fais coller .
tu attends que ca s' arrete et tu dis si il a fini la copie sans erreur ou pas .


Le câble USB qui relie le disque à l' ordinateur est neuf ?

Dernière modification par iznobe (Le 13/06/2025, à 17:15)

retour COMPLET et utilisable de commande  |  script montage partitions

MSI Z490A-pro , i7 10700 , 32 GB RAM .

En ligne

#123 Le 13/06/2025, à 17:16

stl1811

Re : Impossible d'ouvrir un disque dur externe

steph810 a écrit :

Bonjour,
essaie de monitor les port usb voir s'il y as parfois des deconnexions, ouvrez plusieurs terminal et dans chacun entrer ces commandes:

udevadm monitor | grep usb
journalctl -f | grep usb
sudo dmesg -C
sudo dmesg -f kern,syslog,daemon -T -w
watch interval=0.25 lsblk -S
watch interval=0.25 lsblk -fe7

Je t'avoue que rien n'a vraiment l'air de réagir. Je trouve ça étrange que ce soit le HUB, si j'arrive à faire des transferts sur windows sans problèmes.
Je ne sais même p^lus finalement si quand je fais les tests, je dois le mettre sur l'USB en direct ou sur le HUB.
Est-il possible de tester le HUB? Pour savoir si c'est lui qui pose un problème?

Merci de vos réponses

Hors ligne

#124 Le 13/06/2025, à 18:16

geole

Re : Impossible d'ouvrir un disque dur externe

Bonjour
Cette commande n est pas mal si j en crois mon essai

udevadm monitor | grep usb

C est provoqué par une effleurement de la clé USB

a@p:~$ udevadm monitor | grep usb
KERNEL[30955.851878] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30955.852857] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30955.853535] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
KERNEL[30955.853698] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30955.853797] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30955.853870] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30955.977559] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30955.986423] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30955.988632] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30955.990570] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
UDEV  [30955.996069] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30956.007440] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30956.912608] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
KERNEL[30956.912895] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30956.913414] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
KERNEL[30956.914341] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
KERNEL[30956.914423] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
KERNEL[30956.914696] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30956.921279] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
UDEV  [30956.927450] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30961.185513] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
KERNEL[30961.185651] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30961.185745] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30961.185836] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30961.185914] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30961.188331] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
UDEV  [30961.189671] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30961.190479] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30961.191262] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
UDEV  [30961.309511] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
UDEV  [30961.476806] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30961.520668] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30961.534942] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30961.538145] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30961.974367] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30962.102089] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30962.120267] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30962.216059] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30962.363289] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30962.434450] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30963.952740] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
KERNEL[30963.953233] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
KERNEL[30963.954395] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
UDEV  [30963.960219] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
KERNEL[30963.960909] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30963.962507] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
UDEV  [30963.963788] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
KERNEL[30963.967200] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30963.968984] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30963.969265] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30963.969752] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
UDEV  [30963.970170] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
UDEV  [30963.974124] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30963.976858] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30963.977135] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30963.978332] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30963.978372] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30963.978747] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
KERNEL[30963.978775] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30963.978798] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
KERNEL[30963.978826] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30963.978858] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30963.978893] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30963.978928] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30963.980475] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
UDEV  [30963.987494] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
KERNEL[30964.336181] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30964.336573] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30964.343547] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
KERNEL[30964.343567] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30964.343598] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30964.343635] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30964.346073] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30964.351405] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30964.358056] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
UDEV  [30964.363665] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30964.376241] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30964.385103] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30964.392706] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30964.428292] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30964.495714] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30964.518549] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30964.530128] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30964.530175] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
UDEV  [30964.539663] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30964.557946] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30965.360797] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
KERNEL[30965.361241] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30965.362052] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
KERNEL[30965.362299] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
KERNEL[30965.362630] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
KERNEL[30965.363037] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30965.366399] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
UDEV  [30965.371029] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30969.572621] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
KERNEL[30969.572743] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30969.572819] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30969.572873] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30969.572916] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30969.575359] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30969.577156] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
UDEV  [30969.578364] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
UDEV  [30969.578513] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30969.650620] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
UDEV  [30969.843839] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30969.860987] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30969.869298] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30969.872349] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30970.331377] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30970.408381] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30970.464287] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30970.507250] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30970.542110] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30970.605185] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30971.120374] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30971.121989] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
KERNEL[30971.123770] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
KERNEL[30971.123815] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
KERNEL[30971.123834] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
KERNEL[30971.123868] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30971.123905] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30971.123939] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30971.135432] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
KERNEL[30971.135482] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
UDEV  [30971.135510] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30971.138857] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
UDEV  [30971.145309] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30971.147176] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30971.147212] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30971.147238] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
KERNEL[30971.149696] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30971.149740] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30971.154590] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30971.154645] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30971.154675] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30971.154709] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30971.154748] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30971.154785] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30971.158959] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30971.168490] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
KERNEL[30971.509614] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30971.509921] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30971.510584] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
KERNEL[30971.510615] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30971.510649] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30971.510691] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30971.512965] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30971.515081] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30971.523983] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
UDEV  [30971.524045] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30971.529011] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30971.535805] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30971.543434] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30971.562997] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30971.588558] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30971.597098] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30971.599466] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30971.601437] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
UDEV  [30971.606288] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30971.617630] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30972.528949] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
KERNEL[30972.529512] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30972.529704] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
KERNEL[30972.530725] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
KERNEL[30972.530940] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
KERNEL[30972.530991] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30972.533513] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
UDEV  [30972.537706] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30976.799175] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
KERNEL[30976.799297] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30976.799383] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30976.799464] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30976.799533] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30976.803456] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
UDEV  [30976.804564] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30976.805388] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30976.806383] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
UDEV  [30976.880741] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
UDEV  [30977.066108] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30977.066304] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30977.085269] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30977.090697] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30977.490159] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30977.554372] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30977.573344] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30977.607206] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30977.631726] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30977.702920] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30988.785272] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
KERNEL[30988.788250] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
KERNEL[30988.788380] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
KERNEL[30988.788675] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
KERNEL[30988.790777] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30988.791085] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30988.791392] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30988.792523] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
UDEV  [30988.797077] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30988.799926] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30988.799968] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
UDEV  [30988.806902] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
UDEV  [30988.807285] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30988.809135] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30988.809196] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30988.809349] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30988.809394] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30988.809419] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
KERNEL[30988.809439] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30988.809463] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
KERNEL[30988.809490] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30988.809523] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30988.810440] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30988.810522] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30988.811929] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
UDEV  [30988.818233] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
KERNEL[30989.163425] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30989.163606] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30989.163877] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
KERNEL[30989.163943] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
KERNEL[30989.163981] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
KERNEL[30989.164093] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30989.165239] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30989.171066] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30989.171111] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
UDEV  [30989.174079] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30989.180089] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30989.186184] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30989.195983] unbind   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30989.212194] remove   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30989.242453] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV  [30989.250649] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30989.253893] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8 (scsi)
UDEV  [30989.257276] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8 (scsi_host)
UDEV  [30989.266138] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV  [30989.281206] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[30990.192866] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
KERNEL[30990.193154] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30990.194059] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
KERNEL[30990.194889] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
KERNEL[30990.194975] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
KERNEL[30990.195541] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30990.198664] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0 (scsi)
UDEV  [30990.204161] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30994.388671] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
KERNEL[30994.388755] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
KERNEL[30994.388815] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30994.388874] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30994.388923] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
UDEV  [30994.390846] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_disk/8:0:0:0 (scsi_disk)
UDEV  [30994.391206] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_device/8:0:0:0 (scsi_device)
UDEV  [30994.391414] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg4 (scsi_generic)
UDEV  [30994.392380] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/bsg/8:0:0:0 (bsg)
UDEV  [30994.466898] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd (block)
UDEV  [30994.615061] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30994.668792] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30994.682340] add      /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30994.688192] bind     /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0 (scsi)
KERNEL[30995.059918] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
UDEV  [30995.143722] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd3 (block)
KERNEL[30995.154388] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
UDEV  [30995.193419] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd2 (block)
KERNEL[30995.222623] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
UDEV  [30995.292668] change   /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1 (block)
x^C
a@p:~$

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity

Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#125 Le 13/06/2025, à 19:17

iznobe

Re : Impossible d'ouvrir un disque dur externe

Est-il possible de tester le HUB? Pour savoir si c'est lui qui pose un problème?

c ' est ce que j ' essaie desesperement de te faire faire ...

retour COMPLET et utilisable de commande  |  script montage partitions

MSI Z490A-pro , i7 10700 , 32 GB RAM .

En ligne

Pages : 1 2 3 4 5 6 7