#1 Le 21/10/2024, à 19:45
- Maminette
Sound converter ne fonctionne plus
Bonsoir,
Je ne peux plus utiliser sound converter, peut importe le format que je veux convertir (mp4, wav, mp3, mkv etc...) J'ai essayé de réinstaller sans succès. Quand je lance une conversion j'ai le message d'erreur suivant qui s'affiche :
J'ai essayé aussi de réinstaller des fichiers Gstreamer, mais sans succès.
Avez-vous une idée de solution, car je suis perdue ?
Merci par avance et bonne soirée.
Hors ligne
#2 Le 21/10/2024, à 20:12
- krodelabestiole
Re : Sound converter ne fonctionne plus
ça ressemble à un problème de permission sur le fichier que tu cherches à convertir.
(vérifie que tu y as accès en lecture et en écriture avec un clic droit sur le fichier -> Propriétés -> Permissions)
nouveau forum ubuntu-fr on en parle là : refonte du site / nouveau design
profil - sujets récurrents - sources du site
Hors ligne
#3 Le 21/10/2024, à 21:14
- Maminette
Re : Sound converter ne fonctionne plus
Merci krodelabestiole pour la proposition.
En recherchant les propriétés, j'ai les droits en tant qu'utilisatrice. J'ai fait par acquis de conscience un sudo chgrp et sudo chown. J'ai toujours la même fenêtre d'erreur lors du lancement de convrsion de soundconverter.
Je vois que l'image sur le post #1 ne s’affiche pas complètement, il faut l'ouvrir à part pour voir le message entier (j'ai du faire une erreur avec ImgBB).
Hors ligne
#4 Le 21/10/2024, à 21:42
- krodelabestiole
Re : Sound converter ne fonctionne plus
Maminette a écrit :
j'ai les droits en tant qu'utilisatrice.
c'est-à-dire ?
tu as quels droits exactement ?
tu peux donner le retour de
ls -l Another\ Brick\ ...tu peux appuyer sur la touche tab pour entrer automatiquement le nom du fichier après les premiers caractères (Anot -> tab), ça ajoutera aussi automatiquement les \ avant les espaces.
nouveau forum ubuntu-fr on en parle là : refonte du site / nouveau design
profil - sujets récurrents - sources du site
Hors ligne
#5 Le 21/10/2024, à 22:18
- Maminette
Re : Sound converter ne fonctionne plus
Retour de ta commande :
sdf@sdf-DH310V2:~$ ls -l /mnt/Basse/001morceauxquejejoue/Pink*floyd
total 529092
-rw-rw-r-- 1 sdf sdf 7216869 oct. 21 19:24 'Another Brick in The Wall (Part. 2) - Pink Floyd Bass Backing Track (With Vocals) (Audio Original).mp3'
-rw-rw-r-- 1 sdf sdf 5995806 oct. 14 11:40 'Another Brick in The Wall (Part. 2) - Pink Floyd Bass Backing Track (With Vocals) (Audio Original).mp4'
-rw-rw-r-- 1 sdf sdf 167885428 avril 2 2024 'Another Brick in the Wall Parts 1 and 2 Pink Floyd Bass tabs for beginners (Bass Cover).mp4'
-rw-rw-r-- 1 sdf sdf 264585371 oct. 24 2021 'Another Brick In The Wall - Pink Floyd (aula de contrabaixo)-qFtx7tZEBCU.mkv'
-rw-rw-r-- 1 sdf sdf 94314841 août 14 11:36 'Pink Floyd - Another Brick in the Wall (Bass cover with TAB) ok.mp4'
-rw-rw-r-- 1 sdf sdf 1772765 oct. 6 17:24 'THE WALL SUR WRITE.odtHors ligne
#6 Le 22/10/2024, à 23:18
- krodelabestiole
Re : Sound converter ne fonctionne plus
ok effectivement tu as le droit en écriture sur ces fichiers.
pour vérifier les permissions de l'arborescence :
namei -l /mnt/Basse/001morceauxquejejoueà quoi correspond ce /mnt/Basse ? le stockage est peut-être monté en lecture seule.
pour vérifier ça :
mount | grep /mnt/Basseou essayer de créer un fichier vide dans ce répertoire avec
touch /mnt/Basse/001morceauxquejejoue/test(on saura si le problème vient de sound converter ou pas)
pour le supprimer :
rm /mnt/Basse/001morceauxquejejoue/testpeut-être aussi que le message n'est pas absolument exact et que sound converter essaie d'écrire dans un autre répertoire ?
voir dans les préférences - menu 3 petits points verticaux - une capture des préférences pourraient peut-être nous aider.
ou peut-être que sound converter est installé dans un format cloisonné (snap ou flatpak) qui ne lui donne pas les bons accès.
pour voir si il est installé depuis les dépôts ubuntu :
apt list soundconvertersinon voir si il apparaît dans le retour de
snap listou
flatpak listnouveau forum ubuntu-fr on en parle là : refonte du site / nouveau design
profil - sujets récurrents - sources du site
Hors ligne
#7 Le 23/10/2024, à 10:53
- Maminette
Re : Sound converter ne fonctionne plus
Bonjour krodelabestiole,
Je te remercie pour toutes ces indications. Voici les réponses à mes recherches :
sdf@sdf-DH310V2:~$ namei -l /mnt/Basse/001morceauxquejejoue
f: /mnt/Basse/001morceauxquejejoue
drwxr-xr-x root root /
drwxr-xr-x root root mnt
drwxrwxrwx sdf sdf Basse
drwxrwxr-x sdf sdf 001morceauxquejejoue
sdf@sdf-DH310V2:~$ mount | grep /mnt/Basse
/dev/sdo1 on /mnt/Basse type ext4 (rw,nosuid,nodev,relatime,x-gvfs-show)
sdf@sdf-DH310V2:~$ touch /mnt/Basse/001morceauxquejejoue/test
sdf@sdf-DH310V2:~$ apt list soundconverter
En train de lister... Fait
soundconverter/focal,focal,now 3.0.2-2 all [installé]
sdf@sdf-DH310V2:~$ snap list
flatpak list
^C
sdf@sdf-DH310V2:~$ snap list
erreur : cannot list snaps: cannot communicate with server: Get "http://localhost/v2/snaps": dial unix /run/snapd.socket: connect: connection refused
sdf@sdf-DH310V2:~$ flatpak list
Name Application ID Version Branch Installation
default …p.Platform.GL.Debug.default 22.08 system
default …p.Platform.GL.Debug.default 22.08-extra system
default …p.Platform.GL.Debug.default 23.08 system
default …p.Platform.GL.Debug.default 23.08-extra system
Mesa …desktop.Platform.GL.default 24.0.9 22.08 system
Mesa (Extra) …desktop.Platform.GL.default 24.0.9 22.08-extra system
Mesa …desktop.Platform.GL.default 24.2.3 23.08 system
Mesa (Extra) …desktop.Platform.GL.default 24.2.3 23.08-extra system
Intel …esktop.Platform.VAAPI.Intel 22.08 system
Intel …esktop.Platform.VAAPI.Intel 23.08 system
openh264 …eedesktop.Platform.openh264 2.1.0 2.2.0 system
GNOME Application P… org.gnome.Platform 43 system
GNOME Application P… org.gnome.Platform 44 system
GNOME Application P… org.gnome.Platform 45 system
KDE Application Pla… org.kde.Platform 5.15-22.08 system
KDE Application Pla… org.kde.Platform 5.15-23.08 system
Krename org.kde.krename 5.0.2 stable system
Warpinator org.x.Warpinator 1.8.6 stable system
sdf@sdf-DH310V2:~$ Merci et bonne journée
Hors ligne
#8 Le 23/10/2024, à 11:25
- Maminette
Re : Sound converter ne fonctionne plus
J'ai essayé de lancer soundconverter par le terminal :
sdf@sdf-DH310V2:~$ soundconverter
faac gstreamer element not found
SoundConverter 3.0.2
/usr/share/soundconverter/python/soundconverter/ui.py:1465: Warning: g_value_type_transformable: assertion 'src_type' failed
builder.add_from_file(gladefile)
(SoundConverter:14006): Gtk-WARNING **: 11:21:57.518: ../../../../gtk/gtkliststore.c:834: Unable to convert from (null) to gchararrayIl semble y avoir un problème avec gstreamer
Hors ligne
#9 Aujourd'hui à 11:06
- Maminette
Re : Sound converter ne fonctionne plus
Bonjour, un petit "up" si possible.
J'ai installé par Synaptic les éléments "faac" qui semblaient manquer quand j'ouvre soundconverter par le terminal.
Mainternant, par le même biais, j'ai ce message :
soundconverter
faac gstreamer element not found
SoundConverter 3.0.2
/usr/share/soundconverter/python/soundconverter/ui.py:1465: Warning: g_value_type_transformable: assertion 'src_type' failed
builder.add_from_file(gladefile)
(SoundConverter:7133): Gtk-WARNING **: 10:58:50.287: ../../../../gtk/gtkliststore.c:834: Unable to convert from (null) to gchararraymalgré l'installation de "faac", il y a en plus ce problème apparent dans /usr/share/soundconverter.... ligne (?) 1465, à tout hasard je livre ce fichier :
#!/usr/bin/python3
# -*- coding: utf-8 -*-
#
# SoundConverter - GNOME application for converting between audio formats.
# Copyright 2004 Lars Wirzenius
# Copyright 2005-2017 Gautier Portet
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 3 of the License.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA
import os
from os.path import basename, dirname
from random import random
import time
import sys
import urllib.request, urllib.parse, urllib.error
from gettext import gettext as _
from gettext import ngettext
from gi.repository import GObject
from gi.repository import Gtk
from gi.repository import Gio
from gi.repository import Gdk
from gi.repository import GLib
from soundconverter.fileoperations import filename_to_uri, beautify_uri
from soundconverter.fileoperations import unquote_filename, vfs_walk, vfs_exists
from soundconverter.gstreamer import ConverterQueue
from soundconverter.gstreamer import available_elements, TypeFinder, TagReader
from soundconverter.gstreamer import audio_profiles_list, audio_profiles_dict
from soundconverter.soundfile import SoundFile
from soundconverter.settings import locale_patterns_dict, custom_patterns, filepattern, settings, get_quality
from soundconverter.namegenerator import TargetNameGenerator
from soundconverter.queue import TaskQueue
from soundconverter.utils import log, debug, idle
from soundconverter.error import show_error
# Names of columns in the file list
MODEL = [ GObject.TYPE_STRING, # visible filename
GObject.TYPE_PYOBJECT, # soundfile
GObject.TYPE_FLOAT, # progress
GObject.TYPE_STRING, # status
GObject.TYPE_STRING, # complete filename
]
COLUMNS = ['filename']
#VISIBLE_COLUMNS = ['filename']
#ALL_COLUMNS = VISIBLE_COLUMNS + ['META']
def gtk_iteration():
while Gtk.events_pending():
Gtk.main_iteration()
def gtk_sleep(duration):
""" trigger a Gtk main_iteration every 10ms
while the code sleeps for the value in seconds
provided in `duration` """
start = time.time()
while time.time() < start + duration:
time.sleep(0.01)
gtk_iteration()
class ErrorDialog:
def __init__(self, builder):
self.dialog = builder.get_object('error_dialog')
self.dialog.set_transient_for(builder.get_object('window'))
self.primary = builder.get_object('primary_error_label')
self.secondary = builder.get_object('secondary_error_label')
def show_error(self, primary, secondary):
self.primary.set_markup(primary)
self.secondary.set_markup(secondary)
try:
sys.stderr.write(_('\nError: %s\n%s\n') % (primary, secondary))
except:
pass
self.dialog.run()
self.dialog.hide()
class MsgAreaErrorDialog_:
def __init__(self, builder):
self.dialog = builder.get_object('error_frame')
self.primary = builder.get_object('label_error')
def show_error(self, primary, secondary):
try:
sys.stderr.write(_('\nError: %s\n%s\n') % (primary, secondary))
except:
pass
#self.msg_area.set_text_and_icon(Gtk.STOCK_DIALOG_ERROR, primary, secondary)
#self.msg_area.show()
self.primary.set_text(primary)
self.dialog.show()
def show_exception(self, exception):
self.show('<b>%s</b>' % GLib.markup_escape_text(exception.primary),
exception.secondary)
class FileList:
""" List of files added by the user. """
# List of MIME types which we accept for drops.
drop_mime_types = ['text/uri-list', 'text/plain', 'STRING']
def __init__(self, window, builder):
self.window = window
self.typefinders = TaskQueue()
self.filelist = set()
self.model = Gtk.ListStore(*MODEL)
self.widget = builder.get_object('filelist')
self.widget.props.fixed_height_mode = True
self.sortedmodel = Gtk.TreeModelSort(self.model)
self.widget.set_model(self.sortedmodel)
self.sortedmodel.set_sort_column_id(4, Gtk.SortType.ASCENDING)
self.widget.get_selection().set_mode(Gtk.SelectionMode.MULTIPLE)
self.widget.drag_dest_set(Gtk.DestDefaults.ALL,
[],
Gdk.DragAction.COPY)
targets = [(accepted, 0, i) for i, accepted in enumerate(self.drop_mime_types)]
self.widget.drag_dest_set_target_list(targets)
self.widget.connect('drag-data-received', self.drag_data_received)
renderer = Gtk.CellRendererProgress()
column = Gtk.TreeViewColumn('progress',
renderer,
value=2,
text=3,
)
column.props.sizing = Gtk.TreeViewColumnSizing.FIXED
self.widget.append_column(column)
self.progress_column = column
self.progress_column.set_visible(False)
renderer = Gtk.CellRendererText()
from gi.repository import Pango
renderer.set_property('ellipsize', Pango.EllipsizeMode.MIDDLE)
column = Gtk.TreeViewColumn('Filename',
renderer,
markup=0,
)
column.props.sizing = Gtk.TreeViewColumnSizing.FIXED
column.set_expand(True)
self.widget.append_column(column)
self.window.progressbarstatus.hide()
self.waiting_files = []
self.waiting_files_last = 0
self.invalid_files_list = []
def drag_data_received(self, widget, context, x, y, selection,
mime_id, time):
widget.stop_emission('drag-data-received')
if 0 <= mime_id < len(self.drop_mime_types):
text = selection.get_data().decode('utf-8')
uris = [uri.strip() for uri in text.split('\n')]
self.add_uris(uris)
context.finish(True, False, time)
def get_files(self):
return [i[1] for i in self.sortedmodel]
def update_progress(self):
if self.files_to_add is not None:
self.window.progressbarstatus.pulse()
return True
return False
def found_type(self, sound_file, mime):
ext = os.path.splitext(sound_file.filename)[1]
debug('mime:', ext, mime)
self.good_files.append(sound_file.uri)
@idle
def add_uris(self, uris, base=None, extensions=None):
""" adds URIs that should be converted to the list
in the gtk interface
uris is a list of string URIs, which are absolute paths
starting with 'file://'
extensions is a list of strings like ['.ogg', '.oga'],
in which case only files of this type are added to the
list. This can be useful when files of multiple types
are inside a directory and only some of them should be
converted. Default:None which accepts all types. """
if len(uris) == 0:
return
start_t = time.time()
files = []
self.window.set_status(_('Scanning files...'))
self.window.progressbarstatus.show()
self.files_to_add = 0
self.window.progressbarstatus.set_fraction(0)
for uri in uris:
gtk_iteration()
if not uri:
continue
if uri.startswith('cdda:'):
show_error('Cannot read from Audio CD.',
'Use SoundJuicer Audio CD Extractor instead.')
return
info = Gio.file_parse_name(uri).query_file_type(Gio.FileMonitorFlags.NONE, None)
if info == Gio.FileType.DIRECTORY:
log('walking: \'%s\'' % uri)
if len(uris) == 1:
# if only one folder is passed to the function,
# use its parent as base path.
base = os.path.dirname(uri)
# get a list of all the files as URIs in
# that directory and its subdirectories
filelist = vfs_walk(uri)
accepted = []
if extensions:
for f in filelist:
for extension in extensions:
if f.lower().endswith(extension):
accepted.append(f)
filelist = accepted
files.extend(filelist)
else:
files.append(uri)
files = [f for f in files if not f.endswith('~SC~')]
if len(files) == 0:
show_error('No files found!', '')
if not base:
base = os.path.commonprefix(files)
if base and not base.endswith('/'):
# we want a common folder
base = base[0:base.rfind('/')]
base += '/'
else:
base += '/'
scan_t = time.time()
log('analysing file integrity')
self.files_to_add = len(files)
# self.good_files will be populated
# by the typefinder, which calls self.found_type.
# It is a list of uris and only contains those files
# for which the mime type could be figured out
self.good_files = []
for f in files:
sound_file = SoundFile(f, base)
typefinder = TypeFinder(sound_file)
typefinder.set_found_type_hook(self.found_type)
self.typefinders.add_task(typefinder)
self.typefinders.queue_ended = self.typefinder_queue_ended
self.typefinders.start()
self.window.set_status('{}'.format(_('Adding Files...')))
log('adding: %d files' % len(files))
# show progress and enable gtk main loop iterations
# so that the ui stays responsive
self.window.progressbarstatus.set_text('0/{}'.format(len(files)))
self.window.progressbarstatus.set_show_text(True)
while(self.typefinders.running):
if self.typefinders.progress:
completed = int(self.typefinders.progress * len(files))
self.window.progressbarstatus.set_fraction(self.typefinders.progress)
self.window.progressbarstatus.set_text('{}/{}'.format(completed, len(files)))
gtk_iteration()
# time.sleep(0.1) # slows everything down. why does the taskqueue depend
# on gtk_iteration being called like a maniac?
self.window.progressbarstatus.set_show_text(False)
# see if one of the files with an audio extension
# was not readable.
known_audio_types = ['.flac', '.mp3', '.aac',
'.m4a', '.mpeg', '.opus', '.vorbis', '.ogg', '.wav']
# invalid_files is the number of files that are not
# added to the list in the current function call
invalid_files = 0
# out of those files, that many have an audio file extension
broken_audiofiles = 0
for f in files:
sound_file = SoundFile(f, base)
# create a list of human readable file paths
# that were not added to the list
if f not in self.good_files:
extension = os.path.splitext(f)[1].lower()
if extension in known_audio_types:
broken_audiofiles += 1
self.invalid_files_list.append(self.format_cell(sound_file))
invalid_files += 1
continue
if sound_file.uri in self.filelist:
log('file already present: \'%s\'' % sound_file.uri)
continue
self.append_file(sound_file)
if invalid_files > 0:
self.window.invalid_files_button.set_visible(True)
if len(files) == invalid_files == 1:
# case 1: the single file that should be added is not supported
show_error(_('The specified file is not supported!'),
_('Either because it is broken or not an audio file.'))
elif len(files) == invalid_files:
# case 2: all files that should be added cannot be added
show_error(_('All {} specified files are not supported!').format(len(files)),
_('Either because they are broken or not audio files.'))
else:
# case 3: some files could not be added (that can already be because
# there is a single picture in a folder of hundreds of sound files).
# Show an error if this skipped file has a soundfile extension,
# otherwise don't bother the user.
log(invalid_files, 'of', len(files), 'files were not added to the list')
if broken_audiofiles > 0:
show_error(ngettext('One audiofile could not be read by gstreamer!',
'{} audiofiles could not be read by gstreamer!', broken_audiofiles).format(broken_audiofiles),
_('Check "Invalid Files" in the menu for more information.'))
else:
# case 4: all files were successfully added. No error message
pass
self.window.set_status()
self.window.progressbarstatus.hide()
self.files_to_add = None
end_t = time.time()
debug('Added %d files in %.2fs (scan %.2fs, add %.2fs)' % (
len(files), end_t - start_t, scan_t - start_t, end_t-scan_t))
def typefinder_queue_ended(self):
if not self.waiting_files:
self.window.set_status()
self.window.progressbarstatus.hide()
def abort(self):
self.typefinders.abort()
def format_cell(self, sound_file):
""" Takes a SoundFile and returns
a human readable path to it. """
return GLib.markup_escape_text(unquote_filename(sound_file.filename))
def set_row_progress(self, number, progress=None, text=None):
self.progress_column.set_visible(True)
if progress is not None:
if self.model[number][2] == 1.0:
return # already...
self.model[number][2] = progress * 100.0
if text is not None:
self.model[number][3] = text
def hide_row_progress(self):
self.progress_column.set_visible(False)
def append_file(self, sound_file):
""" Adds a SoundFile object to the list
of files in the frontend. """
self.model.append([self.format_cell(sound_file), sound_file, 0.0, '',
sound_file.uri])
self.filelist.add(sound_file.uri)
sound_file.filelist_row = len(self.model) - 1
def remove(self, iterator):
uri = self.model.get(iterator, 1)[0].uri
self.filelist.remove(uri)
self.model.remove(iterator)
def is_nonempty(self):
try:
self.model.get_iter((0,))
except ValueError:
return False
return True
class GladeWindow(object):
callbacks = {}
builder = None
def __init__(self, builder):
""" Init GladeWindow, stores the objects's potential callbacks for later.
You have to call connect_signals() when all descendants are ready. """
GladeWindow.builder = builder
GladeWindow.callbacks.update(dict([[x, getattr(self, x)]
for x in dir(self) if x.startswith('on_')]))
def __getattr__(self, attribute):
""" Allow direct use of window widget. """
widget = GladeWindow.builder.get_object(attribute)
if widget is None:
raise AttributeError('Widget \'%s\' not found' % attribute)
self.__dict__[attribute] = widget # cache result
return widget
@staticmethod
def connect_signals():
""" Connect all GladeWindow objects to theirs respective signals """
GladeWindow.builder.connect_signals(GladeWindow.callbacks)
class PreferencesDialog(GladeWindow):
basename_patterns = [
('%(.inputname)s', _('Same as input, but replacing the suffix')),
('%(.inputname)s%(.ext)s',
_('Same as input, but with an additional suffix')),
('%(track-number)02d-%(title)s', _('Track number - title')),
('%(title)s', _('Track title')),
('%(artist)s-%(title)s', _('Artist - title')),
('Custom', _('Custom filename pattern')),
]
subfolder_patterns = [
('%(album-artist)s/%(album)s', _('artist/album')),
('%(album-artist)s-%(album)s', _('artist-album')),
('%(album-artist)s - %(album)s', _('artist - album')),
]
sensitive_names = ['vorbis_quality', 'choose_folder', 'create_subfolders',
'subfolder_pattern', 'jobs_spinbutton', 'resample_hbox',
'force_mono']
def __init__(self, builder, parent):
self.settings = Gio.Settings('org.soundconverter')
GladeWindow.__init__(self, builder)
self.dialog = builder.get_object('prefsdialog')
self.dialog.set_transient_for(parent)
self.example = builder.get_object('example_filename')
self.force_mono = builder.get_object('force_mono')
self.target_bitrate = None
self.sensitive_widgets = {}
for name in self.sensitive_names:
self.sensitive_widgets[name] = builder.get_object(name)
assert self.sensitive_widgets[name] is not None
self.set_widget_initial_values(builder)
self.set_sensitive()
tip = [_('Available patterns:')]
for k in sorted(locale_patterns_dict.values()):
tip.append(k)
self.custom_filename.set_tooltip_text('\n'.join(tip))
#self.resample_rate.connect('changed', self._on_resample_rate_changed)
def set_widget_initial_values(self, builder):
self.quality_tabs.set_show_tabs(False)
if self.settings.get_boolean('same-folder-as-input'):
w = self.same_folder_as_input
else:
w = self.into_selected_folder
w.set_active(True)
self.target_folder_chooser = Gtk.FileChooserDialog(_('Add Folder...'),
self.dialog, Gtk.FileChooserAction.SELECT_FOLDER,
(Gtk.STOCK_CANCEL, Gtk.ResponseType.CANCEL, Gtk.STOCK_OPEN,
Gtk.ResponseType.OK))
self.target_folder_chooser.set_select_multiple(False)
self.target_folder_chooser.set_local_only(False)
uri = filename_to_uri(urllib.parse.quote(self.settings.get_string('selected-folder'), safe='/:@'))
self.target_folder_chooser.set_uri(uri)
self.update_selected_folder()
w = self.create_subfolders
w.set_active(self.settings.get_boolean('create-subfolders'))
w = self.subfolder_pattern
active = self.settings.get_int('subfolder-pattern-index')
model = w.get_model()
model.clear()
for pattern, desc in self.subfolder_patterns:
i = model.append()
model.set(i, 0, desc)
w.set_active(active)
if self.settings.get_boolean('replace-messy-chars'):
w = self.replace_messy_chars
w.set_active(True)
if self.settings.get_boolean('delete-original'):
self.delete_original.set_active(True)
mime_type = self.settings.get_string('output-mime-type')
widgets = ( ('audio/x-vorbis', 'vorbisenc'),
('audio/mpeg' , 'lamemp3enc'),
('audio/x-flac' , 'flacenc'),
('audio/x-wav' , 'wavenc'),
('audio/x-m4a' , 'faac'),
('audio/ogg; codecs=opus' , 'opusenc'),
('gst-profile' , None),
) # must be in same order in output_mime_type
# desactivate output if encoder plugin is not present
widget = self.output_mime_type
model = widget.get_model()
assert len(model) == len(widgets), 'model:%d widgets:%d' % (len(model),
len(widgets))
if not self.gstprofile.get_model().get_n_columns():
self.gstprofile.set_model(Gtk.ListStore(str))
cell = Gtk.CellRendererText()
self.gstprofile.pack_start(cell, 0)
self.gstprofile.add_attribute(cell, 'text', 0)
self.gstprofile.set_active(0)
# check if we can found the stored audio profile
found_profile = False
stored_profile = self.settings.get_string('audio-profile')
for i, profile in enumerate(audio_profiles_list):
description, extension, pipeline = profile
self.gstprofile.get_model().append(['%s (.%s)' % (description, extension)])
if description == stored_profile:
self.gstprofile.set_active(i)
found_profile = True
if not found_profile and stored_profile:
# reset default output
log('Cannot find audio profile "%s", resetting to default output.'
% stored_profile)
self.settings.set_string('audio-profile', '')
self.gstprofile.set_active(0)
self.settings.reset('output-mime-type')
mime_type = self.settings.get_string('output-mime-type')
self.present_mime_types = []
i = 0
model = self.output_mime_type.get_model()
for b in widgets:
mime, encoder_name = b
# valid encoder?
encoder_present = encoder_name and encoder_name in available_elements
# valid profile?
profile_present = mime == 'gst-profile' and audio_profiles_list
if encoder_present or profile_present:
# add to supported outputs
self.present_mime_types.append(mime)
i += 1
else:
# remove it.
del model[i]
for i, mime in enumerate(self.present_mime_types):
if mime_type == mime:
widget.set_active(i)
self.change_mime_type(mime_type)
# display information about mp3 encoding
if 'lamemp3enc' not in available_elements:
w = self.lame_absent
w.show()
w = self.vorbis_quality
quality = self.settings.get_double('vorbis-quality')
quality_setting = get_quality('vorbis', quality, reverse=True)
w.set_active(-1)
self.vorbis_quality.set_active(quality_setting)
if self.settings.get_boolean('vorbis-oga-extension'):
self.vorbis_oga_extension.set_active(True)
w = self.aac_quality
quality = self.settings.get_int('aac-quality')
quality_setting = get_quality('aac', quality, reverse=True)
w.set_active(quality_setting)
w = self.opus_quality
quality = self.settings.get_int('opus-bitrate')
quality_setting = get_quality('opus', quality, reverse=True)
w.set_active(quality_setting)
w = self.flac_compression
quality = self.settings.get_int('flac-compression')
quality_setting = {0: 0, 5: 1, 8: 2}
w.set_active(quality_setting.get(quality, -1))
w = self.wav_sample_width
quality = self.settings.get_int('wav-sample-width')
quality_setting = {8: 0, 16: 1, 32: 2}
w.set_active(quality_setting.get(quality, -1))
self.mp3_quality = self.mp3_quality
self.mp3_mode = self.mp3_mode
mode = self.settings.get_string('mp3-mode')
self.change_mp3_mode(mode)
w = self.basename_pattern
active = self.settings.get_int('name-pattern-index')
model = w.get_model()
model.clear()
for pattern, desc in self.basename_patterns:
iter = model.append()
model.set(iter, 0, desc)
w.set_active(active)
self.custom_filename.set_text(self.settings.get_string(
'custom-filename-pattern'))
if self.basename_pattern.get_active() == len(self.basename_patterns)-1:
self.custom_filename_box.set_sensitive(True)
else:
self.custom_filename_box.set_sensitive(False)
self.resample_toggle.set_active(self.settings.get_boolean('output-resample'))
cell = Gtk.CellRendererText()
self.resample_rate.pack_start(cell, True)
self.resample_rate.add_attribute(cell, 'text', 0)
rates = [8000, 11025, 16000, 22050, 32000, 44100, 48000, 96000, 128000]
rate = self.settings.get_int('resample-rate')
try:
idx = rates.index(rate)
except ValueError:
idx = -1
self.resample_rate.set_active(idx)
self.force_mono.set_active(self.settings.get_boolean('force-mono'))
self.jobs.set_active(self.settings.get_int('limit-jobs'))
self.jobs_spinbutton.set_value(self.settings.get_int('number-of-jobs'))
self.update_jobs()
self.update_example()
def update_selected_folder(self):
self.into_selected_folder.set_use_underline(False)
self.into_selected_folder.set_label(_('Into folder %s') %
beautify_uri(self.settings.get_string('selected-folder')))
def get_bitrate_from_settings(self):
bitrate = 0
aprox = True
mode = self.settings.get_string('mp3-mode')
mime_type = self.settings.get_string('output-mime-type')
if mime_type == 'audio/x-vorbis':
quality = self.settings.get_double('vorbis-quality')*10
quality = int(quality)
bitrates = (64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 500)
bitrate = bitrates[quality]
elif mime_type == 'audio/x-m4a':
bitrate = self.settings.get_int('aac-quality')
elif mime_type == 'audio/ogg; codecs=opus':
bitrate = self.settings.get_int('opus-bitrate')
elif mime_type == 'audio/mpeg':
quality = {
'cbr': 'mp3-cbr-quality',
'abr': 'mp3-abr-quality',
'vbr': 'mp3-vbr-quality'
}
bitrate = self.settings.get_int(quality[mode])
if mode == 'vbr':
# hum, not really, but who cares? :)
bitrates = (320, 256, 224, 192, 160, 128, 112, 96, 80, 64)
bitrate = bitrates[bitrate]
if mode == 'cbr':
aprox = False
if bitrate:
if aprox:
return '~%d kbps' % bitrate
else:
return '%d kbps' % bitrate
else:
return 'N/A'
def update_example(self):
sound_file = SoundFile('foo/bar.flac')
sound_file.tags.update({'track-number': 1, 'track-count': 99})
sound_file.tags.update({'album-disc-number': 2, 'album-disc-count': 9})
sound_file.tags.update(locale_patterns_dict)
s = GLib.markup_escape_text(beautify_uri(
self.generate_filename(sound_file, for_display=True)))
p = 0
replaces = []
while 1:
b = s.find('{', p)
if b == -1:
break
e = s.find('}', b)
tag = s[b:e+1]
if tag.lower() in [
v.lower() for v in list(locale_patterns_dict.values())]:
k = tag
l = k.replace('{', '<b>{')
l = l.replace('}', '}</b>')
replaces.append([k, l])
else:
k = tag
l = k.replace('{', '<span foreground=\'red\'><i>{')
l = l.replace('}', '}</i></span>')
replaces.append([k, l])
p = b+1
for k, l in replaces:
s = s.replace(k, l)
self.example.set_markup(s)
markup = '<small>%s</small>' % (_('Target bitrate: %s') %
self.get_bitrate_from_settings())
self.aprox_bitrate.set_markup(markup)
def get_output_suffix(self):
output_type = self.settings.get_string('output-mime-type')
profile = self.settings.get_string('audio-profile')
profile_ext = audio_profiles_dict[profile][1] if profile else ''
output_suffix = {
'audio/x-vorbis': '.ogg',
'audio/x-flac': '.flac',
'audio/x-wav': '.wav',
'audio/mpeg': '.mp3',
'audio/x-m4a': '.m4a',
'audio/ogg; codecs=opus': '.opus',
'gst-profile': '.' + profile_ext,
}.get(output_type, '.?')
if output_suffix == '.ogg' and self.settings.get_boolean('vorbis-oga-extension'):
output_suffix = '.oga'
return output_suffix
def generate_filename(self, sound_file, for_display=False):
generator = TargetNameGenerator()
generator.suffix = self.get_output_suffix()
if not self.settings.get_boolean('same-folder-as-input'):
folder = self.settings.get_string('selected-folder')
folder = urllib.parse.quote(folder, safe='/:@')
folder = filename_to_uri(folder)
generator.folder = folder
if self.settings.get_boolean('create-subfolders'):
generator.subfolders = self.get_subfolder_pattern()
generator.basename = self.get_basename_pattern()
if for_display:
generator.replace_messy_chars = False
return unquote_filename(generator.get_target_name(sound_file))
else:
generator.replace_messy_chars = self.settings.get_boolean('replace-messy-chars')
return generator.get_target_name(sound_file)
def generate_temp_filename(self, soundfile):
folder, basename = os.path.split(soundfile.uri)
if not self.settings.get_boolean('same-folder-as-input'):
folder = self.settings.get_string('selected-folder')
folder = urllib.parse.quote(folder, safe='/:')
while True:
filename = folder + '/' + basename + '~' + str(random())[-6:] + '~SC~'
if not vfs_exists(filename):
return filename
def process_custom_pattern(self, pattern):
for k in custom_patterns:
pattern = pattern.replace(k, custom_patterns[k])
return pattern
def set_sensitive(self):
for widget in list(self.sensitive_widgets.values()):
widget.set_sensitive(False)
x = self.settings.get_boolean('same-folder-as-input')
for name in ['choose_folder', 'create_subfolders',
'subfolder_pattern']:
self.sensitive_widgets[name].set_sensitive(not x)
self.sensitive_widgets['vorbis_quality'].set_sensitive(
self.settings.get_string('output-mime-type') == 'audio/x-vorbis')
self.sensitive_widgets['jobs_spinbutton'].set_sensitive(
self.settings.get_int('limit-jobs'))
if self.settings.get_string('output-mime-type') == 'gst-profile':
self.sensitive_widgets['resample_hbox'].set_sensitive(False)
self.sensitive_widgets['force_mono'].set_sensitive(False)
else:
self.sensitive_widgets['resample_hbox'].set_sensitive(True)
self.sensitive_widgets['force_mono'].set_sensitive(True)
def run(self):
self.dialog.run()
self.dialog.hide()
def on_delete_original_toggled(self, button):
self.settings.set_boolean('delete-original', button.get_active())
def on_same_folder_as_input_toggled(self, button):
self.settings.set_boolean('same-folder-as-input', True)
self.set_sensitive()
self.update_example()
def on_into_selected_folder_toggled(self, button):
self.settings.set_boolean('same-folder-as-input', False)
self.set_sensitive()
self.update_example()
def on_choose_folder_clicked(self, button):
ret = self.target_folder_chooser.run()
folder = self.target_folder_chooser.get_uri()
self.target_folder_chooser.hide()
if ret == Gtk.ResponseType.OK:
if folder:
self.settings.set_string('selected-folder', urllib.parse.unquote(folder))
self.update_selected_folder()
self.update_example()
def on_create_subfolders_toggled(self, button):
self.settings.set_boolean('create-subfolders', button.get_active())
self.update_example()
def on_subfolder_pattern_changed(self, combobox):
self.settings.set_int('subfolder-pattern-index', combobox.get_active())
self.update_example()
def get_subfolder_pattern(self):
index = self.settings.get_int('subfolder-pattern-index')
if index < 0 or index >= len(self.subfolder_patterns):
index = 0
return self.subfolder_patterns[index][0]
def on_basename_pattern_changed(self, combobox):
self.settings.set_int('name-pattern-index', combobox.get_active())
if combobox.get_active() == len(self.basename_patterns)-1:
self.custom_filename_box.set_sensitive(True)
else:
self.custom_filename_box.set_sensitive(False)
self.update_example()
def get_basename_pattern(self):
index = self.settings.get_int('name-pattern-index')
if index < 0 or index >= len(self.basename_patterns):
index = 0
if self.basename_pattern.get_active() == len(self.basename_patterns)-1:
return self.process_custom_pattern(self.custom_filename.get_text())
else:
return self.basename_patterns[index][0]
def on_custom_filename_changed(self, entry):
self.settings.set_string('custom-filename-pattern', entry.get_text())
self.update_example()
def on_replace_messy_chars_toggled(self, button):
self.settings.set_boolean('replace-messy-chars', button.get_active())
def change_mime_type(self, mime_type):
self.settings.set_string('output-mime-type', mime_type)
self.set_sensitive()
self.update_example()
tabs = {
'audio/x-vorbis': 0,
'audio/mpeg': 1,
'audio/x-flac': 2,
'audio/x-wav': 3,
'audio/x-m4a': 4,
'audio/ogg; codecs=opus': 5,
'gst-profile': 6,
}
self.quality_tabs.set_current_page(tabs[mime_type])
def on_output_mime_type_changed(self, combo):
self.change_mime_type(
self.present_mime_types[combo.get_active()]
)
def on_output_mime_type_ogg_vorbis_toggled(self, button):
if button.get_active():
self.change_mime_type('audio/x-vorbis')
def on_output_mime_type_flac_toggled(self, button):
if button.get_active():
self.change_mime_type('audio/x-flac')
def on_output_mime_type_wav_toggled(self, button):
if button.get_active():
self.change_mime_type('audio/x-wav')
def on_output_mime_type_mp3_toggled(self, button):
if button.get_active():
self.change_mime_type('audio/mpeg')
def on_output_mime_type_aac_toggled(self, button):
if button.get_active():
self.change_mime_type('audio/x-m4a')
def on_output_mime_type_opus_toggled(self, button):
if button.get_active():
self.change_mime_type('audio/ogg; codecs=opus')
def on_vorbis_quality_changed(self, combobox):
if combobox.get_active() == -1:
return # just de-selectionning
fquality = get_quality('vorbis', combobox.get_active())
self.settings.set_double('vorbis-quality', fquality)
self.hscale_vorbis_quality.set_value(fquality*10)
self.update_example()
def on_hscale_vorbis_quality_value_changed(self, hscale):
fquality = hscale.get_value()
if abs(self.settings.get_double('vorbis-quality') - fquality/10.0) < 0.001:
return # already at right value
self.settings.set_double('vorbis-quality', fquality/10.0)
self.vorbis_quality.set_active(-1)
self.update_example()
def on_vorbis_oga_extension_toggled(self, toggle):
self.settings.set_boolean('vorbis-oga-extension', toggle.get_active())
self.update_example()
def on_aac_quality_changed(self, combobox):
self.settings.set_int('aac-quality', get_quality('aac', combobox.get_active()))
self.update_example()
def on_opus_quality_changed(self, combobox):
self.settings.set_int('opus-bitrate', get_quality('opus', combobox.get_active()))
self.update_example()
def on_wav_sample_width_changed(self, combobox):
quality = (8, 16, 32)
self.settings.set_int('wav-sample-width', quality[combobox.get_active()])
self.update_example()
def on_flac_compression_changed(self, combobox):
quality = (0, 5, 8)
self.settings.set_int('flac-compression', quality[combobox.get_active()])
self.update_example()
def on_gstprofile_changed(self, combobox):
profile = audio_profiles_list[combobox.get_active()]
description, extension, pipeline = profile
self.settings.set_string('audio-profile', description)
self.update_example()
def on_force_mono_toggle(self, button):
self.settings.set_boolean('force-mono', button.get_active())
self.update_example()
def change_mp3_mode(self, mode):
keys = {'cbr': 0, 'abr': 1, 'vbr': 2}
self.mp3_mode.set_active(keys[mode])
keys = {
'cbr': 'mp3-cbr-quality',
'abr': 'mp3-abr-quality',
'vbr': 'mp3-vbr-quality',
}
quality = self.settings.get_int(keys[mode])
range_ = {
'cbr': 14,
'abr': 14,
'vbr': 10,
}
self.hscale_mp3.set_range(0, range_[mode])
self.mp3_quality.set_active(get_quality('mp3', quality, mode, reverse=True))
self.update_example()
def on_mp3_mode_changed(self, combobox):
mode = ('cbr', 'abr', 'vbr')[combobox.get_active()]
self.settings.set_string('mp3-mode', mode)
self.change_mp3_mode(mode)
def on_mp3_quality_changed(self, combobox):
keys = {
'cbr': 'mp3-cbr-quality',
'abr': 'mp3-abr-quality',
'vbr': 'mp3-vbr-quality'
}
mode = self.settings.get_string('mp3-mode')
self.settings.set_int(keys[mode], get_quality('mp3', combobox.get_active(), mode))
self.update_example()
def on_hscale_mp3_value_changed(self, widget):
mode = self.settings.get_string('mp3-mode')
keys = {
'cbr': 'mp3-cbr-quality',
'abr': 'mp3-abr-quality',
'vbr': 'mp3-vbr-quality'
}
quality = {
'cbr': (32, 40, 48, 56, 64, 80, 96, 112,
128, 160, 192, 224, 256, 320),
'abr': (32, 40, 48, 56, 64, 80, 96, 112,
128, 160, 192, 224, 256, 320),
'vbr': (9, 8, 7, 6, 5, 4, 3, 2, 1, 0),
}
self.settings.set_int(keys[mode], quality[mode][int(widget.get_value())])
self.mp3_quality.set_active(-1)
self.update_example()
def on_resample_rate_changed(self, combobox):
selected = combobox.get_active()
rates = [8000, 11025, 16000, 22050, 32000, 44100, 48000, 96000, 128000]
self.settings.set_int('resample-rate', rates[selected])
def on_resample_toggle(self, rstoggle):
self.settings.set_boolean('output-resample', rstoggle.get_active())
self.resample_rate.set_sensitive(rstoggle.get_active())
def on_jobs_toggled(self, jtoggle):
self.settings.set_int('limit-jobs', jtoggle.get_active())
self.jobs_spinbutton.set_sensitive(jtoggle.get_active())
self.update_jobs()
def on_jobs_spinbutton_value_changed(self, jspinbutton):
self.settings.set_int('number-of-jobs', int(jspinbutton.get_value()))
self.update_jobs()
def update_jobs(self):
if self.settings.get_int('limit-jobs'):
settings['jobs'] = self.settings.get_int('number-of-jobs')
else:
settings['jobs'] = None
self.set_sensitive()
_old_progress = 0
_old_total = 0
class SoundConverterWindow(GladeWindow):
""" Main application class. """
sensitive_names = ['remove', 'clearlist',
'convert_button']
unsensitive_when_converting = ['remove', 'clearlist', 'prefs_button',
'toolbutton_addfile', 'toolbutton_addfolder', 'convert_button',
'filelist', 'menubar']
def __init__(self, builder):
self.paused_time = 0
GladeWindow.__init__(self, builder)
self.widget = builder.get_object('window')
self.prefs = PreferencesDialog(builder, self.widget)
GladeWindow.connect_signals()
self.filelist = FileList(self, builder)
self.filelist_selection = self.filelist.widget.get_selection()
self.filelist_selection.connect('changed', self.selection_changed)
self.existsdialog = builder.get_object('existsdialog')
self.existsdialog.message = builder.get_object('exists_message')
self.existsdialog.apply_to_all = builder.get_object('apply_to_all')
self.addfolderchooser = Gtk.FileChooserDialog(_('Add Folder...'),
self.widget, Gtk.FileChooserAction.SELECT_FOLDER,
(Gtk.STOCK_CANCEL, Gtk.ResponseType.CANCEL, Gtk.STOCK_OPEN,
Gtk.ResponseType.OK))
self.addfolderchooser.set_select_multiple(True)
self.addfolderchooser.set_local_only(False)
self.combo = Gtk.ComboBox()
self.store = Gtk.ListStore(str)
self.combo.set_model(self.store)
combo_rend = Gtk.CellRendererText()
self.combo.pack_start(combo_rend, True)
self.combo.add_attribute(combo_rend, 'text', 0)
# TODO: get all (gstreamer) knew files
for files in filepattern:
self.store.append(['%s (%s)' % (files[0], files[1])])
self.combo.set_active(0)
self.addfolderchooser.set_extra_widget(self.combo)
self.addchooser = Gtk.FileChooserDialog(_('Add Files...'),
self.widget, Gtk.FileChooserAction.OPEN,
(Gtk.STOCK_CANCEL, Gtk.ResponseType.CANCEL, Gtk.STOCK_OPEN,
Gtk.ResponseType.OK))
self.addchooser.set_select_multiple(True)
self.addchooser.set_local_only(False)
self.addfile_combo = Gtk.ComboBox()
self.addfile_store = Gtk.ListStore(str)
self.addfile_combo.set_model(self.addfile_store)
combo_rend = Gtk.CellRendererText()
self.addfile_combo.pack_start(combo_rend, True)
self.addfile_combo.add_attribute(combo_rend, 'text', 0)
self.addfile_combo.connect('changed', self.on_addfile_combo_changed)
self.pattern = []
# TODO: get all (gstreamer) knew files
for files in filepattern:
self.pattern.append(files[1])
self.addfile_store.append(['%s (%s)' % (files[0], files[1])])
self.addfile_combo.set_active(0)
self.addchooser.set_extra_widget(self.addfile_combo)
#self.aboutdialog.set_property('name', NAME)
#self.aboutdialog.set_property('version', VERSION)
#self.aboutdialog.set_transient_for(self.widget)
self.converter = ConverterQueue(self)
self.sensitive_widgets = {}
for name in self.sensitive_names:
self.sensitive_widgets[name] = builder.get_object(name)
for name in self.unsensitive_when_converting:
self.sensitive_widgets[name] = builder.get_object(name)
self.set_sensitive()
self.set_status()
# This bit of code constructs a list of methods for binding to Gtk+
# signals. This way, we don't have to maintain a list manually,
# saving editing effort. It's enough to add a method to the suitable
# class and give the same name in the .glade file.
def __getattr__(self, attribute):
""" Allow direct use of window widget. """
widget = self.builder.get_object(attribute)
if widget is None:
raise AttributeError('Widget \'%s\' not found' % attribute)
self.__dict__[attribute] = widget # cache result
return widget
def close(self, *args):
debug('closing...')
self.filelist.abort()
self.converter.abort()
self.widget.hide()
self.widget.destroy()
# wait one second...
# yes, this sucks badly, but signals can still be called by gstreamer
# so wait a bit for things to calm down, and quit.
gtk_sleep(1)
Gtk.main_quit()
return True
on_window_delete_event = close
on_quit_activate = close
on_quit_button_clicked = close
def on_add_activate(self, *args):
last_folder = self.prefs.settings.get_string('last-used-folder')
if last_folder:
self.addchooser.set_current_folder_uri(last_folder)
ret = self.addchooser.run()
folder = self.addchooser.get_current_folder_uri()
self.addchooser.hide()
if ret == Gtk.ResponseType.OK and folder:
self.filelist.add_uris(self.addchooser.get_uris())
self.prefs.settings.set_string('last-used-folder', folder)
self.set_sensitive()
def addfile_filter_cb(self, info, pattern):
filename = info.display_name
return filename.lower().endswith(pattern[1:])
def on_addfile_combo_changed(self, w):
""" Callback for combobox 'changed' signal \n
Set a new filter for the filechooserwidget """
filefilter = Gtk.FileFilter()
if self.addfile_combo.get_active():
filefilter.add_custom(Gtk.FileFilterFlags.DISPLAY_NAME,
self.addfile_filter_cb,
self.pattern[self.addfile_combo.get_active()])
else:
filefilter.add_pattern('*.*')
self.addchooser.set_filter(filefilter)
def on_addfolder_activate(self, *args):
last_folder = self.prefs.settings.get_string('last-used-folder')
if last_folder:
self.addfolderchooser.set_current_folder_uri(last_folder)
ret = self.addfolderchooser.run()
folders = self.addfolderchooser.get_uris()
folder = self.addfolderchooser.get_current_folder_uri()
self.addfolderchooser.hide()
if ret == Gtk.ResponseType.OK:
extensions = None
if self.combo.get_active():
patterns = filepattern[self.combo.get_active()][1].split(';')
extensions = [os.path.splitext(p)[1] for p in patterns]
self.filelist.add_uris(folders, None, extensions)
if folder:
self.prefs.settings.set_string('last-used-folder', folder)
self.set_sensitive()
def on_remove_activate(self, *args):
model, paths = self.filelist_selection.get_selected_rows()
while paths:
# Remove files
childpath = model.convert_path_to_child_path(paths[0])
i = self.filelist.model.get_iter(childpath)
self.filelist.remove(i)
model, paths = self.filelist_selection.get_selected_rows()
# re-assign row numbers
files = self.filelist.get_files()
for i, sound_file in enumerate(files):
sound_file.filelist_row = i
self.set_sensitive()
def on_clearlist_activate(self, *args):
self.filelist.model.clear()
self.filelist.filelist.clear()
self.filelist.invalid_files_list = []
self.invalid_files_button.set_visible(False)
self.set_sensitive()
self.set_status()
def on_showinvalid_activate(self, *args):
self.showinvalid_dialog_label.set_label('Those are the files that could '
'not be added to the list due to not\ncontaining audio data, being '
'broken or being incompatible to gstreamer:')
buffer = Gtk.TextBuffer()
buffer.set_text('\n'.join(self.filelist.invalid_files_list))
self.showinvalid_dialog_list.set_buffer(buffer)
self.showinvalid_dialog.run()
self.showinvalid_dialog.hide()
def on_progress(self):
if self.pulse_progress is not None: #
if self.pulse_progress > 0: # still waiting for tags
self.set_progress(self.pulse_progress, display_time=False)
return True
if self.pulse_progress == -1: # still waiting for add
self.set_progress()
return True
perfile = {}
for s in self.filelist.get_files():
perfile[s] = None
running, progress = self.converter.get_progress(perfile)
if running is True:
self.set_progress(progress)
for sound_file, taskprogress in perfile.items():
if taskprogress is None and sound_file.progress:
self.set_file_progress(sound_file, 1.0)
sound_file.progress = None
if taskprogress is not None and taskprogress > 0.0:
sound_file.progress = taskprogress
self.set_file_progress(sound_file, taskprogress)
return running
def do_convert(self):
self.pulse_progress = -1
GLib.timeout_add(100, self.on_progress)
self.progressbar.set_text(_('Preparing conversion...'))
files = self.filelist.get_files()
total = len(files)
for i, sound_file in enumerate(files):
gtk_iteration()
self.pulse_progress = i/total # TODO: still needed?
sound_file.progress = None
self.converter.add(sound_file)
# all was OK
self.set_status()
self.pulse_progress = None
self.converter.start()
self.set_sensitive()
def on_convert_button_clicked(self, *args):
# reset and show progress bar
self.set_progress(0)
self.progress_frame.show()
self.status_frame.hide()
self.progress_time = time.time()
self.set_progress()
self.set_status(_('Converting'))
for soundfile in self.filelist.get_files():
self.set_file_progress(soundfile, 0.0)
# start conversion
self.do_convert()
# update ui
self.set_sensitive()
def on_button_pause_clicked(self, *args):
self.converter.toggle_pause(not self.converter.paused)
if self.converter.paused:
self.current_pause_start = time.time()
else:
self.paused_time += time.time() - self.current_pause_start
def on_button_cancel_clicked(self, *args):
self.converter.abort()
self.set_status(_('Canceled'))
self.set_sensitive()
self.conversion_ended()
def on_select_all_activate(self, *args):
self.filelist.widget.get_selection().select_all()
def on_clear_activate(self, *args):
self.filelist.widget.get_selection().unselect_all()
def on_preferences_activate(self, *args):
self.prefs.run()
on_prefs_button_clicked = on_preferences_activate
def on_about_activate(self, *args):
about = self.aboutdialog
about.set_property('name', NAME)
about.set_property('version', VERSION)
about.set_transient_for(self.widget)
#TODO: about.set_property('translator_credits', TRANSLATORS)
about.run()
def on_aboutdialog_response(self, *args):
self.aboutdialog.hide()
def selection_changed(self, *args):
self.set_sensitive()
def conversion_ended(self):
self.pulse_progress = False
self.progress_frame.hide()
self.filelist.hide_row_progress()
self.status_frame.show()
self.widget.set_sensitive(True)
try:
from gi.repository import Unity
launcher = Unity.LauncherEntry.get_for_desktop_id ("soundconverter.desktop")
launcher.set_property("progress_visible", False)
except ImportError:
pass
def set_widget_sensitive(self, name, sensitivity):
self.sensitive_widgets[name].set_sensitive(sensitivity)
def set_sensitive(self):
""" Update the sensitive state of UI for the current state """
for w in self.unsensitive_when_converting:
self.set_widget_sensitive(w, not self.converter.running)
if not self.converter.running:
self.set_widget_sensitive('remove',
self.filelist_selection.count_selected_rows() > 0)
self.set_widget_sensitive('convert_button',
self.filelist.is_nonempty())
def set_file_progress(self, sound_file, progress):
row = sound_file.filelist_row
self.filelist.set_row_progress(row, progress)
def set_progress(self, fraction=None, display_time=True):
if not fraction:
if fraction is None:
self.progressbar.pulse()
else:
self.progressbar.set_fraction(0)
self.progressbar.set_text('')
self.progressfile.set_markup('')
self.filelist.hide_row_progress()
return
if self.converter.paused:
self.progressbar.set_text(_('Paused'))
self.widget.set_title('%s - %s' % (_('SoundConverter'), _('Paused')))
return
fraction = min(max(fraction, 0.0), 1.0)
self.progressbar.set_fraction(fraction)
if display_time:
t = time.time() - self.converter.run_start_time - \
self.paused_time
if t < 1:
# wait a bit not to display crap
self.progressbar.pulse()
return
r = (t / fraction - t)
s = max(r % 60, 1)
m = r / 60
remaining = _('%d:%02d left') % (m, s)
self.progressbar.set_text(remaining)
self.progressbar.set_show_text(True)
self.progress_time = time.time()
self.widget.set_title('%s - %s' % (_('SoundConverter'), remaining))
def set_status(self, text=None, ready=True):
if not text:
text = _('Ready')
if ready:
self.widget.set_title(_('SoundConverter'))
self.statustext.set_markup(text)
self.set_sensitive()
gtk_iteration()
def is_active(self):
return self.widget.is_active()
NAME = VERSION = None
win = None
def gui_main(name, version, gladefile, input_files):
""" This is the main function for the gtk gui mode.
The values for name, version and gladefile are
determined during `make` and provided when this
function is called in soundconverter.py
input_files is an array of string paths, read from
the command line arguments. It can also be an empty
array since the user interface provides the tools
for adding files. """
global NAME, VERSION
NAME, VERSION = name, version
GLib.set_application_name(name)
GLib.set_prgname(name)
input_files = list(map(filename_to_uri, input_files))
builder = Gtk.Builder()
builder.set_translation_domain(name.lower())
builder.add_from_file(gladefile)
global win
win = SoundConverterWindow(builder)
from . import error
error.set_error_handler(ErrorDialog(builder))
#error_dialog = MsgAreaErrorDialog(builder)
#error_dialog.msg_area = win.msg_area
#error.set_error_handler(error_dialog)
win.filelist.add_uris(input_files)
win.set_sensitive()
Gtk.main()il y a 1478 lignes ! et je ne vois rien de spécial #1465
par ailleurs, j'ai suivi la documentation de Gstreamer, mais les commandes se rapportent à d'anciennes versions et les installations de greffons sont pbsolètes à priori.
Faut-il purger quekque chose et réinstaller ? je suis paumée.
Hors ligne