Pages : 1
#1 Le 10/08/2024, à 16:00
- bricoloo
Galère de HP 110w - le retour (Résolu)
Résumé des épisodes précédents :
Après avoir bien galéré pour installer cette imprimante sur mon PC, galvanisé par ce triomphe, j'ai voulu l'installer aussi sur mon ordi portable (même version d'Ubuntu).
J'ai suivi exactement la même procédure avec HPLIP, mais à la fin, cela a merdoyé et l'installation a avorté lamentablement...
Je joins une copie d'écran du terminal censé m'expliquer ce qui a cloché. Merci de votre aide. Roland
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: Channel write error
error: Channel write error
error: Device is busy or in an error state. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.
Done.
RE-STARTING HP_SYSTRAY
----------------------
HP Linux Imaging and Printing System (ver. 3.24.4)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Unable to lock /home/papa/.hplip/hp-systray.lock. Is hp-systray already running?
papa@papa:~/Bureau$ error: Channel write error
error: Channel write error
error: Channel write error
papa@papa:~/Bureau$ La typographie et les couleurs ne sont pas fidèles, car j'avais fait un copier/coller dans Word avant de fermer le terminal
Dernière modification par bricoloo (Le 11/08/2024, à 17:05)
Hors ligne
#2 Le 10/08/2024, à 16:05
- xubu1957
Re : Galère de HP 110w - le retour (Résolu)
Bonjour,
Il faudrait fournir > les Informations utiles à donner lorsque j'ai un problème.
Rajout, la Doc hplip
Dernière modification par xubu1957 (Le 10/08/2024, à 16:06)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 10/08/2024, à 20:01
- bricoloo
Re : Galère de HP 110w - le retour (Résolu)
OK alors voici le premier ;
apa@papa:~/Bureau$ dpkg -l | grep hplip
rc hplip 3.21.12+dfsg0-1 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.21.12+dfsg0-1 all HP Linux Printing and Imaging - data files
rc hplip-gui 3.21.12+dfsg0-1 all HP Linux Printing and Imaging - GUI utilities (Qt-based)
papa@papa:~/Bureau$ Hors ligne
#4 Le 10/08/2024, à 20:10
- bricoloo
Re : Galère de HP 110w - le retour (Résolu)
Puis le second :
papa@papa:~/Bureau$ hp-check
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/papa/Bureau/hp-check.log
HP Linux Imaging and Printing System (ver. 3.24.4)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
\Gtk-Message: 20:05:22.178: Failed to load module "canberra-gtk-module"
---------------
| SYSTEM INFO |
---------------
Kernel: 6.5.0-44-generic #44~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Jun 18 14:36:16 UTC 2 GNU/Linux
Host: papa
Proc: 6.5.0-44-generic #44~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Jun 18 14:36:16 UTC 2 GNU/Linux
Distribution: 12 22.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.24.4
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 22.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.24.4
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.24.4
html=/usr/share/doc/hplip-3.24.4
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.24.4
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[fax]
email_address =
voice_phone =
[last_used]
device_uri = "hp:/usb/HP_LaserJet_M109-M112?serial=VNC3C68240"
printer_name = HP_LaserJet_M109-M112
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1723289631
latest_available_version = 3.24.4
notify_upgrade = true
pending_upgrade_time = 0
[installation]
date_time = 08/10/24 20:05:23
version = 3.24.4
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.4.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.55.0 OK -
Gtk-Message: 20:05:24.293: Failed to load module "canberra-gtk-module"
Gtk-Message: 20:05:24.331: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.1.1 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.21.2 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.4.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.4.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.35' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9.1 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.0.2 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.10.12 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.15.6 OK -
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.15.6 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.18 OK -
python3-xml Python XML libraries REQUIRED - 2.4.7 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.10.12 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 10.4.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.6.8 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 11.4.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.24.4 OK -
hpmudext IO-Extension REQUIRED - 3.24.4 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.24.4 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.24.4 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_M109-M112?serial=VNC3C68240
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_M109-M112?serial=VNC3C68240
error: Device not found
error: Communication status: Failed
Type: Unknown
Device URI: dnssd://bbox%20Ippos%20Printer._ipp._tcp.local/
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 1
Total Warnings: 0
Done.
papa@papa:~/Bureau$ Je n'ai rien trouvé dans la doc Hplip
Hors ligne
#5 Le 10/08/2024, à 20:26
- xubu1957
Re : Galère de HP 110w - le retour (Résolu)
Dans le tutoriel épinglé, sylvain3800 a écrit :
B.2 ) Les infos a donner quel que soit la marque de l'imprimante
il suffit de copier/coller ces commandes :
dpkg -l | grep cupslpstat -t/usr/sbin/lpinfo -vcat /var/log/cups/error_logdpkg -l | grep -v ^ii
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#6 Le 11/08/2024, à 17:04
- bricoloo
Re : Galère de HP 110w - le retour (Résolu)
Yesssssssssssssssss Ca marche !!!
Résolu pour le portable ! Merci
Me reste plus qu'à essayer la fonction wi fi, Mais en cas de problème, je suppose que ce n-est pas la même section ?
De toute façon je te tiens au courant, que ça fonctionne ou non.
Hors ligne
#7 Le 11/08/2024, à 17:18
- xubu1957
Re : Galère de HP 110w - le retour (Résolu)
Si c'est le Wi-Fi de l'imprimante, c'est dans cette section.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne