#26 Le 14/07/2024, à 18:45
- xubu1957
Re : Problemes avec la sortie HDMI sur mini PC Ryzen 9 9740HS
Fournis :
xinput listla carte graphique :
lspci -vnn | grep -A 12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"et :
echo $XDG_SESSION_TYPEpour voir si c'est Wayland ou x11.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#27 Le 15/07/2024, à 09:25
- CHP_1960
Re : Problemes avec la sortie HDMI sur mini PC Ryzen 9 9740HS
Je viens d'effectuer des tests sur un PC portable sous processeur Intel pour tests et là, le port HDMI est correctement reconnu en mode multi-canal.
Donc, je confirme que c'est un problème soit avec l'intégration du pilote AMD HDMI, soit avec la prise en charge des différentes couches logicielles audio dans KDE Neon.
Le problème est que je ne suis pas suffisamment expérimenté sur Linux pour déterminer à quel niveau cela peut se passer : organigramme complet de l'empilement des couches logicielles depuis la carte physique > driver > ??? > ??? > jusqu'au mixer ALSA ou Pulse.
A la vue des logs que j'ai obtenu, j'opte pour une couche logicielle manquante ou un problème de paramétrage. Mais là, encore, je suis perdu dans le fouillis des fichiers de config et de leur ordonnancement (je n'arrive pas à trouver ces infos sur internet).
Si quelqu'un sait quels fichiers de config correspondent à quoi et à quel niveau ils sont impliqués, je pourrais effectuer un débogage. Mais rien n'est simple sur Linux et j'ai l'impression que personne (ni même les devs) ne maîtrisent cette partie.
Hors ligne
#28 Le 15/07/2024, à 09:55
- CHP_1960
Re : Problemes avec la sortie HDMI sur mini PC Ryzen 9 9740HS
C'est du Wayland
Hors ligne
#29 Le 16/07/2024, à 09:31
- CHP_1960
Re : Problemes avec la sortie HDMI sur mini PC Ryzen 9 9740HS
J'ai fait des recherches supplémentaires sur la gestion des devices ALSA et j'ai trouvé des différences (importantes?) entre un PC qui fonctionne (sur Kubuntu) et un PC qui ne fonctionne pas (sur KDE Neon).
Première surprise : les devices ne sont pas nommés pareil.
Deuxième surprise : La carte son HDMI AMD semble bien chargée au démarrage par KDE Neon mais les capabilities ne sont pas identifiées ou ne sont pas correctement configurées.
Ci-joint la capture sur Kubuntu (qui fonctionne avec l'audio digitale multi-canal en HDMI):
$ pactl list
Module #1
Nom : libpipewire-module-rt
Paramètre : {
nice.level = -11
#rt.prio = 88
#rt.time.soft = -1
#rt.time.hard = -1
}
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-rt"
object.id = "1"
object.serial = "1"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Use realtime thread scheduling, falling back to RTKit"
module.usage = "[nice.level=<priority: default 20(don't change)>] [rt.prio=<priority: default 88>] [rt.time.soft=<in usec: default -1] [rt.time.hard=<in usec: default -1] "
module.version = "0.3.48"
nice.level = "-11"
Module #2
Nom : libpipewire-module-protocol-native
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-protocol-native"
object.id = "2"
object.serial = "2"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Native protocol using unix sockets"
module.version = "0.3.48"
Module #3
Nom : libpipewire-module-profiler
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-profiler"
object.id = "3"
object.serial = "3"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Generate Profiling data"
module.version = "0.3.48"
Module #5
Nom : libpipewire-module-metadata
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-metadata"
object.id = "5"
object.serial = "5"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Allow clients to create metadata store"
module.version = "0.3.48"
Module #7
Nom : libpipewire-module-spa-device-factory
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-spa-device-factory"
object.id = "7"
object.serial = "7"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Provide a factory to make SPA devices"
module.version = "0.3.48"
Module #9
Nom : libpipewire-module-spa-node-factory
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-spa-node-factory"
object.id = "9"
object.serial = "9"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Provide a factory to make SPA nodes"
module.version = "0.3.48"
Module #11
Nom : libpipewire-module-client-node
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-client-node"
object.id = "11"
object.serial = "11"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Allow clients to create and control remote nodes"
module.version = "0.3.48"
Module #13
Nom : libpipewire-module-client-device
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-client-device"
object.id = "13"
object.serial = "13"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Allow clients to create and control remote devices"
module.version = "0.3.48"
Module #15
Nom : libpipewire-module-portal
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-portal"
object.id = "15"
object.serial = "15"
Module #16
Nom : libpipewire-module-access
Paramètre : {
# access.allowed to list an array of paths of allowed
# apps.
#access.allowed = [
# /usr/bin/pipewire-media-session
#]
# An array of rejected paths.
#access.rejected = [ ]
# An array of paths with restricted access.
#access.restricted = [ ]
# Anything not in the above lists gets assigned the
# access.force permission.
#access.force = flatpak
}
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-access"
object.id = "16"
object.serial = "16"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Perform access check"
module.usage = "[ access.force=flatpak ] [ access.allowed=<cmd-line> ] [ access.rejected=<cmd-line> ] [ access.restricted=<cmd-line> ] "
module.version = "0.3.48"
Module #17
Nom : libpipewire-module-adapter
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-adapter"
object.id = "17"
object.serial = "17"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Manage adapter nodes"
module.version = "0.3.48"
Module #19
Nom : libpipewire-module-link-factory
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-link-factory"
object.id = "19"
object.serial = "19"
module.author = "Wim Taymans <wim.taymans@gmail.com>"
module.description = "Allow clients to create links"
module.version = "0.3.48"
Module #21
Nom : libpipewire-module-session-manager
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.name = "libpipewire-module-session-manager"
object.id = "21"
object.serial = "21"
module.author = "George Kiagiadakis <george.kiagiadakis@collabora.com>"
module.description = "Implements objects for session management"
module.version = "0.3.48"
Module #536870912
Nom : module-always-sink
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Pauli Virtanen <pav@iki.fi>"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.usage = "sink_name=<name of sink>"
module.version = "0.3.48"
Destination #48
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.hdmi-stereo
Description : HD-Audio Generic Stéréo numérique (HDMI)
Pilote : PipeWire
Spécification de l’échantillon : s32le 2ch 48000Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 4294967295
Sourdine : non
Volume : front-left: 65621 / 100% / 0,03 dB, front-right: 65621 / 100% / 0,03 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Source du moniteur : alsa_output.pci-0000_c5_00.1.hdmi-stereo.monitor
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Propriétés :
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.name = "HDMI 0"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HD-Audio Generic at 0xdc5c8000 irq 131"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "hdmi:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "sound"
device.id = "40"
device.profile.description = "Stéréo numérique (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "HD-Audio Generic Stéréo numérique (HDMI)"
node.name = "alsa_output.pci-0000_c5_00.1.hdmi-stereo"
node.nick = "HD-Audio Generic"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hdmi:0:playback"
priority.driver = "696"
priority.session = "696"
factory.id = "18"
client.id = "34"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "47"
object.serial = "48"
Ports :
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
Port actif : hdmi-output-0
Formats :
pcm
dts-iec61937, format.rate = "{ \"min\": 32000, \"max\": 192000 }"
ac3-iec61937, format.rate = "{ \"min\": 32000, \"max\": 192000 }"
mpeg-iec61937, format.rate = "{ \"min\": 32000, \"max\": 192000 }"
mpeg2-aac-iec61937, format.rate = "{ \"min\": 32000, \"max\": 192000 }"
eac3-iec61937, format.rate = "{ \"min\": 32000, \"max\": 192000 }"
Source #48
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.hdmi-stereo.monitor
Description : Monitor of HD-Audio Generic Stéréo numérique (HDMI)
Pilote : PipeWire
Spécification de l’échantillon : s32le 2ch 48000Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 4294967295
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Moniteur de la destination : alsa_output.pci-0000_c5_00.1.hdmi-stereo
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY
Propriétés :
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.name = "HDMI 0"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HD-Audio Generic at 0xdc5c8000 irq 131"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "hdmi:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "monitor"
device.id = "40"
device.profile.description = "Stéréo numérique (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "HD-Audio Generic Stéréo numérique (HDMI)"
node.name = "alsa_output.pci-0000_c5_00.1.hdmi-stereo"
node.nick = "HD-Audio Generic"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hdmi:0:playback"
priority.driver = "696"
priority.session = "696"
factory.id = "18"
client.id = "34"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "47"
object.serial = "48"
Formats :
pcm
Source #49
État : SUSPENDED
Nom : alsa_input.pci-0000_c5_00.5-platform-acp_ps_mach.0.stereo-fallback
Description : Raven/Raven2/FireFlight/Renoir Audio Processor Stéréo
Pilote : PipeWire
Spécification de l’échantillon : s32le 2ch 48000Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 4294967295
Sourdine : non
Volume : front-left: 48287 / 74% / -7,96 dB, front-right: 48287 / 74% / -7,96 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Moniteur de la destination : n/d
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY
Propriétés :
alsa.card = "2"
alsa.card_name = "acp63"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_soc_ps_mach"
alsa.id = "DMIC capture dmic-hifi-0"
alsa.long_card_name = "ShenzhenMeigaoElectronicEquipmentCo.Ltd-Venusseries-Defaultstring-F7BSC"
alsa.name = ""
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "ShenzhenMeigaoElectronicEquipmentCo.Ltd-Venusseries-Defaultstring-F7BSC"
api.alsa.card.name = "acp63"
api.alsa.path = "hw:2"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "1"
device.api = "alsa"
device.class = "sound"
device.id = "41"
device.profile.description = "Stéréo"
device.profile.name = "stereo-fallback"
device.routes = "1"
factory.name = "api.alsa.pcm.source"
media.class = "Audio/Source"
device.description = "Raven/Raven2/FireFlight/Renoir Audio Processor Stéréo"
node.name = "alsa_input.pci-0000_c5_00.5-platform-acp_ps_mach.0.stereo-fallback"
node.nick = "acp63"
node.pause-on-idle = "false"
object.path = "alsa:pcm:2:hw:2:capture"
priority.driver = "2000"
priority.session = "2000"
factory.id = "18"
client.id = "34"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "48"
object.serial = "49"
Ports :
analog-input: Entrée analogique (type: Analog, priority: 10000, availability unknown)
Port actif : analog-input
Formats :
pcm
Source #50
État : SUSPENDED
Nom : alsa_input.pci-0000_c5_00.6.analog-stereo
Description : Family 17h (Models 10h-1fh) HD Audio Controller Stéréo analogique
Pilote : PipeWire
Spécification de l’échantillon : s32le 2ch 48000Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 4294967295
Sourdine : non
Volume : front-left: 48287 / 74% / -7,96 dB, front-right: 48287 / 74% / -7,96 dB
balance 0,00
Volume de base : 5206 / 8% / -66,00 dB
Moniteur de la destination : n/d
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propriétés :
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC269VB Analog"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c0000 irq 132"
alsa.name = "ALC269VB Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HD-Audio Generic at 0xdc5c0000 irq 132"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "0"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Stéréo analogique"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.source"
media.class = "Audio/Source"
device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Stéréo analogique"
node.name = "alsa_input.pci-0000_c5_00.6.analog-stereo"
node.nick = "HD-Audio Generic"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:front:1:capture"
priority.driver = "2009"
priority.session = "2009"
factory.id = "18"
client.id = "34"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "31"
object.serial = "50"
Ports :
analog-input-internal-mic: Microphone interne (type: Mic, priority: 8900, availability group: Legacy 1, availability unknown)
analog-input-mic: Microphone (type: Mic, priority: 8700, availability group: Legacy 2, not available)
Port actif : analog-input-internal-mic
Formats :
pcm
Client #32
Pilote : PipeWire
Module propriétaire : 2
Propriétés :
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1811"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
pipewire.sec.label = "unconfined"
module.id = "2"
object.id = "32"
object.serial = "32"
config.name = "pipewire-pulse.conf"
cpu.max-align = "64"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.name = "pipewire"
application.process.binary = "pipewire"
application.language = "fr_FR.UTF-8"
application.process.id = "1811"
application.process.user = "kubuntu"
application.process.host = "Venus-series"
core.version = "0.3.48"
core.name = "pipewire-kubuntu-1811"
pipewire.access = "unrestricted"
Client #34
Pilote : PipeWire
Module propriétaire : 2
Propriétés :
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1810"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
pipewire.sec.label = "unconfined"
module.id = "2"
object.id = "33"
object.serial = "34"
config.name = "/usr/share/wireplumber/wireplumber.conf"
application.name = "WirePlumber"
wireplumber.daemon = "true"
wireplumber.export-core = "true"
log.level = "2"
wireplumber.script-engine = "lua-scripting"
cpu.max-align = "64"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.process.binary = "wireplumber"
application.language = "fr_FR.UTF-8"
application.process.id = "1810"
application.process.user = "kubuntu"
application.process.host = "Venus-series"
core.version = "0.3.48"
core.name = "pipewire-kubuntu-1810"
pipewire.access = "unrestricted"
Client #35
Pilote : PipeWire
Module propriétaire : 2
Propriétés :
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1810"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
pipewire.sec.label = "unconfined"
module.id = "2"
object.id = "34"
object.serial = "35"
application.name = "WirePlumber [export]"
config.name = "/usr/share/wireplumber/wireplumber.conf"
wireplumber.daemon = "true"
wireplumber.export-core = "true"
log.level = "2"
wireplumber.script-engine = "lua-scripting"
cpu.max-align = "64"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.process.binary = "wireplumber"
application.language = "fr_FR.UTF-8"
application.process.id = "1810"
application.process.user = "kubuntu"
application.process.host = "Venus-series"
core.version = "0.3.48"
core.name = "pipewire-kubuntu-1810"
pipewire.access = "unrestricted"
Client #60
Pilote : PipeWire
Module propriétaire : 2
Propriétés :
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1811"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
pipewire.sec.label = "unconfined"
module.id = "2"
object.id = "53"
object.serial = "60"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Plasma PA"
application.id = "org.kde.plasma-pa"
application.icon_name = "audio-card"
application.process.id = "2135"
application.process.user = "kubuntu"
application.process.host = "Venus-series"
application.process.binary = "plasmashell"
application.language = "fr_FR.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "561bf87a01774b9d9b702d3d0c656d08"
application.process.session_id = "1"
config.name = "pipewire-pulse.conf"
cpu.max-align = "64"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.48"
core.name = "pipewire-kubuntu-1811"
pipewire.access = "unrestricted"
Client #61
Pilote : PipeWire
Module propriétaire : 2
Propriétés :
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1811"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
pipewire.sec.label = "unconfined"
module.id = "2"
object.id = "54"
object.serial = "61"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.process.id = "3251"
application.process.user = "kubuntu"
application.process.host = "Venus-series"
application.process.binary = "pactl"
application.name = "pactl"
application.language = "fr_FR.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "561bf87a01774b9d9b702d3d0c656d08"
application.process.session_id = "1"
config.name = "pipewire-pulse.conf"
cpu.max-align = "64"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.48"
core.name = "pipewire-kubuntu-1811"
pipewire.access = "unrestricted"
Carte #41
Nom : alsa_card.pci-0000_c5_00.1
Pilote : alsa
Module propriétaire : n/d
Propriétés :
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HD-Audio Generic at 0xdc5c8000 irq 131"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "hw:0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:c5:00.1"
device.description = "HD-Audio Generic"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_c5_00.1"
device.nick = "HD-Audio Generic"
device.plugged.usec = "5631316"
device.product.id = "5696"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.vendor.id = "4098"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
media.class = "Audio/Device"
factory.id = "14"
client.id = "34"
object.id = "40"
object.serial = "41"
object.path = "alsa:pcm:0"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.string = "0"
Profils :
off: Éteint (sorties : 0, sources : 0, priorité : 0, disponible : oui)
output:hdmi-stereo: Sortie Stéréo numérique (HDMI) (sorties : 1, sources : 0, priorité : 5900, disponible : oui)
output:hdmi-stereo-extra1: Sortie Digital Stereo (HDMI 2) (sorties : 1, sources : 0, priorité : 5700, disponible : non)
output:hdmi-stereo-extra2: Sortie Digital Stereo (HDMI 3) (sorties : 1, sources : 0, priorité : 5700, disponible : non)
output:hdmi-stereo-extra3: Sortie Digital Stereo (HDMI 4) (sorties : 1, sources : 0, priorité : 5700, disponible : non)
output:hdmi-surround: Sortie Surround numérique 5.1 (HDMI) (sorties : 1, sources : 0, priorité : 800, disponible : oui)
output:hdmi-surround71: Sortie Digital Surround 7.1 (HDMI) (sorties : 1, sources : 0, priorité : 800, disponible : oui)
output:hdmi-surround-extra1: Sortie Digital Surround 5.1 (HDMI 2) (sorties : 1, sources : 0, priorité : 600, disponible : non)
output:hdmi-surround71-extra1: Sortie Digital Surround 7.1 (HDMI 2) (sorties : 1, sources : 0, priorité : 600, disponible : non)
output:hdmi-surround-extra2: Sortie Digital Surround 5.1 (HDMI 3) (sorties : 1, sources : 0, priorité : 600, disponible : non)
output:hdmi-surround71-extra2: Sortie Digital Surround 7.1 (HDMI 3) (sorties : 1, sources : 0, priorité : 600, disponible : non)
output:hdmi-surround-extra3: Sortie Digital Surround 5.1 (HDMI 4) (sorties : 1, sources : 0, priorité : 600, disponible : non)
output:hdmi-surround71-extra3: Sortie Digital Surround 7.1 (HDMI 4) (sorties : 1, sources : 0, priorité : 600, disponible : non)
pro-audio: Pro Audio (sorties : 4, sources : 0, priorité : 1, disponible : oui)
Profil actif : output:hdmi-stereo
Ports :
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
Propriétés :
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
device.product.name = "HDMI2.0 1x2"
Partie du(des) profil(s) : output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Propriétés :
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Partie du(des) profil(s) : output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Propriétés :
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Partie du(des) profil(s) : output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Propriétés :
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Partie du(des) profil(s) : output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Carte #42
Nom : alsa_card.pci-0000_c5_00.5-platform-acp_ps_mach.0
Pilote : alsa
Module propriétaire : n/d
Propriétés :
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.card.longname = "ShenzhenMeigaoElectronicEquipmentCo.Ltd-Venusseries-Defaultstring-F7BSC"
api.alsa.card.name = "acp63"
api.alsa.path = "hw:2"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:c5:00.5-platform-acp_ps_mach.0"
device.description = "Raven/Raven2/FireFlight/Renoir Audio Processor"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_c5_00.5-platform-acp_ps_mach.0"
device.nick = "acp63"
device.plugged.usec = "5678195"
device.product.id = "5602"
device.product.name = "Raven/Raven2/FireFlight/Renoir Audio Processor"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.5/acp_ps_mach.0/sound/card2"
device.vendor.id = "4130"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
media.class = "Audio/Device"
factory.id = "14"
client.id = "34"
object.id = "41"
object.serial = "42"
object.path = "alsa:pcm:2"
alsa.card = "2"
alsa.card_name = "acp63"
alsa.long_card_name = "ShenzhenMeigaoElectronicEquipmentCo.Ltd-Venusseries-Defaultstring-F7BSC"
alsa.driver_name = "snd_soc_ps_mach"
device.string = "2"
Profils :
off: Éteint (sorties : 0, sources : 0, priorité : 0, disponible : oui)
input:stereo-fallback: Entrée Stéréo (sorties : 0, sources : 1, priorité : 51, disponible : oui)
pro-audio: Pro Audio (sorties : 0, sources : 1, priorité : 1, disponible : oui)
Profil actif : input:stereo-fallback
Ports :
analog-input: Entrée analogique (type: Analog, priority: 10000, latency offset: 0 usec, availability unknown)
Propriétés :
port.type = "analog"
card.profile.port = "0"
Partie du(des) profil(s) : input:stereo-fallback
Carte #43
Nom : alsa_card.pci-0000_c5_00.6
Pilote : alsa
Module propriétaire : n/d
Propriétés :
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HD-Audio Generic at 0xdc5c0000 irq 132"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "hw:1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:c5:00.6"
device.description = "Family 17h (Models 10h-1fh) HD Audio Controller"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_c5_00.6"
device.nick = "HD-Audio Generic"
device.plugged.usec = "5653169"
device.product.id = "5603"
device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
device.subsystem = "sound"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.6/sound/card1"
device.vendor.id = "4130"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
media.class = "Audio/Device"
factory.id = "14"
client.id = "34"
object.id = "42"
object.serial = "43"
object.path = "alsa:pcm:1"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c0000 irq 132"
alsa.driver_name = "snd_hda_intel"
device.string = "1"
Profils :
off: Éteint (sorties : 0, sources : 0, priorité : 0, disponible : oui)
output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (sorties : 1, sources : 1, priorité : 6565, disponible : non)
output:analog-stereo: Sortie Stéréo analogique (sorties : 1, sources : 0, priorité : 6500, disponible : non)
input:analog-stereo: Entrée Stéréo analogique (sorties : 0, sources : 1, priorité : 65, disponible : oui)
pro-audio: Pro Audio (sorties : 1, sources : 1, priorité : 1, disponible : oui)
Profil actif : input:analog-stereo
Ports :
analog-input-internal-mic: Microphone interne (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
Propriétés :
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Partie du(des) profil(s) : input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 2, not available)
Propriétés :
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Partie du(des) profil(s) : input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Casque audio (type: Casque audio, priority: 9900, latency offset: 0 usec, availability group: Legacy 3, not available)
Propriétés :
port.type = "headphones"
port.availability-group = "Legacy 3"
device.icon_name = "audio-headphones"
card.profile.port = "2"
Partie du(des) profil(s) : output:analog-stereo, output:analog-stereo+input:analog-stereoEt la configuration sur KDE Neon (qui n'a pas de son multi-canal sur HDMI) :
$ pactl list
Module #0
Nom : module-device-restore
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "15.99.1"
Module #1
Nom : module-stream-restore
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "15.99.1"
Module #2
Nom : module-card-restore
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "15.99.1"
Module #3
Nom : module-augment-properties
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "15.99.1"
Module #4
Nom : module-switch-on-port-available
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "15.99.1"
Module #5
Nom : module-switch-on-connect
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Michael Terry"
module.description = "When a sink/source is added, switch to it or conditionally switch to it"
module.version = "15.99.1"
Module #6
Nom : module-udev-detect
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "15.99.1"
Module #7
Nom : module-bluetooth-policy
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "15.99.1"
Module #8
Nom : module-bluetooth-discover
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "15.99.1"
Module #9
Nom : module-bluez5-discover
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "15.99.1"
Module #10
Nom : module-native-protocol-unix
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "15.99.1"
Module #11
Nom : module-gsettings
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "15.99.1"
Module #12
Nom : module-default-device-restore
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "15.99.1"
Module #13
Nom : module-always-sink
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Colin Guthrie"
module.description = "Garde toujours au moins une destination même si elle est vide"
module.version = "15.99.1"
Module #15
Nom : module-intended-roles
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "15.99.1"
Module #16
Nom : module-suspend-on-idle
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "15.99.1"
Module #17
Nom : module-systemd-login
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "15.99.1"
Module #18
Nom : module-position-event-sounds
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "15.99.1"
Module #19
Nom : module-role-cork
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "15.99.1"
Module #20
Nom : module-snap-policy
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Canonical Ltd"
module.description = "Ubuntu Snap policy management"
module.version = "15.99.1"
Module #21
Nom : module-filter-heuristics
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "15.99.1"
Module #22
Nom : module-filter-apply
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "15.99.1"
Module #24
Nom : module-alsa-card
Paramètre : device_id="1" name="pci-0000_c5_00.6" card_name="alsa_card.pci-0000_c5_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Nombre d’utilisations : 0
Propriétés :
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "15.99.1"
Module #25
Nom : module-alsa-card
Paramètre : device_id="0" name="pci-0000_c5_00.1" card_name="alsa_card.pci-0000_c5_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Nombre d’utilisations : 0
Propriétés :
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "15.99.1"
Module #26
Nom : module-cli-protocol-unix
Paramètre :
Nombre d’utilisations : n/d
Propriétés :
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "15.99.1"
Destination #2
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_9__sink
Description : HD-Audio Generic HDMI / DisplayPort 4 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Source du moniteur : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_9__sink.monitor
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY
Propriétés :
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 3"
alsa.id = "HDMI 3"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "9"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "_ucm0003.hw:Generic,9"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:Generic,9: sink"
device.profile.description = "HDMI / DisplayPort 4 Output"
alsa.mixer_device = "_ucm0003.hw:Generic"
device.description = "HD-Audio Generic HDMI / DisplayPort 4 Output"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports :
[Out] HDMI4: HDMI / DisplayPort 4 Output (type: HDMI, priority: 1400, not available)
Port actif : [Out] HDMI4
Formats :
pcm
Destination #3
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_8__sink
Description : HD-Audio Generic HDMI / DisplayPort 3 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Source du moniteur : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_8__sink.monitor
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY
Propriétés :
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 2"
alsa.id = "HDMI 2"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "8"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "_ucm0003.hw:Generic,8"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:Generic,8: sink"
device.profile.description = "HDMI / DisplayPort 3 Output"
alsa.mixer_device = "_ucm0003.hw:Generic"
device.description = "HD-Audio Generic HDMI / DisplayPort 3 Output"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports :
[Out] HDMI3: HDMI / DisplayPort 3 Output (type: HDMI, priority: 1300, not available)
Port actif : [Out] HDMI3
Formats :
pcm
Destination #4
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_7__sink
Description : HD-Audio Generic HDMI / DisplayPort 2 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Source du moniteur : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_7__sink.monitor
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY
Propriétés :
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "_ucm0003.hw:Generic,7"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:Generic,7: sink"
device.profile.description = "HDMI / DisplayPort 2 Output"
alsa.mixer_device = "_ucm0003.hw:Generic"
device.description = "HD-Audio Generic HDMI / DisplayPort 2 Output"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports :
[Out] HDMI2: HDMI / DisplayPort 2 Output (type: HDMI, priority: 1200, not available)
Port actif : [Out] HDMI2
Formats :
pcm
Destination #5
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_3__sink
Description : HD-Audio Generic HDMI / DisplayPort 1 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Source du moniteur : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_3__sink.monitor
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE DECIBEL_VOLUME LATENCY
Propriétés :
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "_ucm0003.hw:Generic,3"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:Generic,3: sink"
device.profile.description = "HDMI / DisplayPort 1 Output"
alsa.mixer_device = "_ucm0003.hw:Generic"
device.description = "HD-Audio Generic HDMI / DisplayPort 1 Output"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports :
[Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 1100, available)
Port actif : [Out] HDMI1
Formats :
pcm
Source #2
État : SUSPENDED
Nom : alsa_input.pci-0000_c5_00.6.HiFi__hw_Generic_1__source
Description : Family 17h (Models 10h-1fh) HD Audio Controller Headphones Stereo Microphone
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 24
Sourdine : oui
Volume : front-left: 8251 / 13% / -54,00 dB, front-right: 8251 / 13% / -54,00 dB
balance 0,00
Volume de base : 5206 / 8% / -66,00 dB
Moniteur de la destination : n/d
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propriétés :
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VB Analog"
alsa.id = "ALC269VB Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c0000 irq 132"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
device.string = "_ucm0002.hw:Generic_1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:Generic_1: source"
device.profile.description = "Headphones Stereo Microphone"
alsa.mixer_device = "_ucm0002.hw:Generic_1"
device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Headphones Stereo Microphone"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports :
[In] Mic2: Headphones Stereo Microphone (type: Mic, priority: 200, not available)
Port actif : [In] Mic2
Formats :
pcm
Source #3
État : SUSPENDED
Nom : alsa_input.pci-0000_c5_00.6.HiFi__hw_acp63__source
Description : Family 17h (Models 10h-1fh) HD Audio Controller Digital Microphone
Pilote : module-alsa-card.c
Spécification de l’échantillon : s32le 2ch 48000Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 24
Sourdine : oui
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Moniteur de la destination : n/d
Latence : 0 usec, configuré 0 usec
Marqueurs : HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Propriétés :
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "DMIC capture dmic-hifi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "acp63"
alsa.long_card_name = "ShenzhenMeigaoElectronicEquipmentCo.Ltd-Venusseries-Defaultstring-F7BSC"
alsa.driver_name = "snd_soc_ps_mach"
device.bus_path = "pci-0000:c5:00.5-platform-acp_ps_mach.0"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.5/acp_ps_mach.0/sound/card2"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e2"
device.product.name = "Raven/Raven2/FireFlight/Renoir Audio Processor"
device.string = "_ucm0002.hw:acp63"
device.buffering.buffer_size = "32768"
device.buffering.fragment_size = "8192"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:acp63: source"
device.profile.description = "Digital Microphone"
alsa.mixer_device = "_ucm0002.hw:Generic_1"
device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Digital Microphone"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports :
[In] Mic1: Digital Microphone (type: Mic, priority: 100, availability unknown)
Port actif : [In] Mic1
Formats :
pcm
Source #4
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_9__sink.monitor
Description : Monitor of HD-Audio Generic HDMI / DisplayPort 4 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Moniteur de la destination : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_9__sink
Latence : 0 usec, configuré 0 usec
Marqueurs : DECIBEL_VOLUME LATENCY
Propriétés :
device.description = "Monitor of HD-Audio Generic HDMI / DisplayPort 4 Output"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats :
pcm
Source #5
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_8__sink.monitor
Description : Monitor of HD-Audio Generic HDMI / DisplayPort 3 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Moniteur de la destination : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_8__sink
Latence : 0 usec, configuré 0 usec
Marqueurs : DECIBEL_VOLUME LATENCY
Propriétés :
device.description = "Monitor of HD-Audio Generic HDMI / DisplayPort 3 Output"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats :
pcm
Source #6
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_7__sink.monitor
Description : Monitor of HD-Audio Generic HDMI / DisplayPort 2 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Moniteur de la destination : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_7__sink
Latence : 0 usec, configuré 0 usec
Marqueurs : DECIBEL_VOLUME LATENCY
Propriétés :
device.description = "Monitor of HD-Audio Generic HDMI / DisplayPort 2 Output"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats :
pcm
Source #7
État : SUSPENDED
Nom : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_3__sink.monitor
Description : Monitor of HD-Audio Generic HDMI / DisplayPort 1 Output
Pilote : module-alsa-card.c
Spécification de l’échantillon : s16le 2ch 44100Hz
Plan des canaux : front-left,front-right
Module du propriétaire : 25
Sourdine : non
Volume : front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Volume de base : 65536 / 100% / 0,00 dB
Moniteur de la destination : alsa_output.pci-0000_c5_00.1.HiFi__hw_Generic_3__sink
Latence : 0 usec, configuré 0 usec
Marqueurs : DECIBEL_VOLUME LATENCY
Propriétés :
device.description = "Monitor of HD-Audio Generic HDMI / DisplayPort 1 Output"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats :
pcm
Client #0
Pilote : module-systemd-login.c
Module propriétaire : 17
Propriétés :
application.name = "Login Session 1"
systemd-login.session = "1"
Client #1
Pilote : protocol-native.c
Module propriétaire : 10
Propriétés :
application.name = "kded6"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = ""
application.icon_name = ""
application.process.id = "1171"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "kded6"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
Client #2
Pilote : protocol-native.c
Module propriétaire : 10
Propriétés :
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1171"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "kded6"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
Client #3
Pilote : protocol-native.c
Module propriétaire : 10
Propriétés :
application.name = ""
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.kde.plasma-pa"
application.icon_name = ""
application.process.id = "1200"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "plasmashell"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
Client #4
Pilote : protocol-native.c
Module propriétaire : 10
Propriétés :
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1200"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "plasmashell"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
Client #5
Pilote : protocol-native.c
Module propriétaire : 10
Propriétés :
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.icon_name = "firefox"
application.version = "127.0.2"
application.process.id = "1617"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "firefox"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
Client #6
Pilote : protocol-native.c
Module propriétaire : 10
Propriétés :
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "1617"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "firefox"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
application.icon_name = "firefox"
Client #10
Pilote : protocol-native.c
Module propriétaire : 10
Propriétés :
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "6565"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "pactl"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
Échantillon #0
Nom : audio-volume-change
Spécification de l’échantillon : s16le 2ch 48000Hz
Plan des canaux : front-left,front-right
Volume : (invalide)
balance 0,00
Durée : 0,3s
Taille : 56,4 Kio
Lazy : non
Nom du fichier : n/d
Propriétés :
media.role = "event"
event.id = "audio-volume-change"
event.description = "Volume Control Feedback Sound"
media.name = "audio-volume-change"
media.filename = "/usr/share/sounds/ocean/stereo/audio-volume-change.oga"
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1200"
application.process.user = "neon"
application.process.host = "KDENeon"
application.process.binary = "plasmashell"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "9d08dc34a26349ab9c915ba2b4a71e76"
application.process.session_id = "1"
Carte #0
Nom : alsa_card.pci-0000_c5_00.6
Pilote : module-alsa-card.c
Module propriétaire : 24
Propriétés :
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c0000 irq 132"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
device.string = "1"
device.description = "Family 17h (Models 10h-1fh) HD Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profils :
HiFi: Play HiFi quality Music (sorties : 1, sources : 2, priorité : 40768, disponible : oui)
off: Éteint (sorties : 0, sources : 0, priorité : 0, disponible : oui)
Profil actif : HiFi
Ports :
[Out] Speaker: Speaker (type: Haut-parleur, priority: 100, latency offset: 0 usec, availability unknown)
Partie du(des) profil(s) : HiFi
[Out] Headphones: Headphones (type: Casque audio, priority: 200, latency offset: 0 usec, not available)
Partie du(des) profil(s) : HiFi
[In] Mic2: Headphones Stereo Microphone (type: Mic, priority: 200, latency offset: 0 usec, not available)
Partie du(des) profil(s) : HiFi
[In] Mic1: Digital Microphone (type: Mic, priority: 100, latency offset: 0 usec, availability unknown)
Partie du(des) profil(s) : HiFi
Carte #1
Nom : alsa_card.pci-0000_c5_00.1
Pilote : module-alsa-card.c
Module propriétaire : 25
Propriétés :
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xdc5c8000 irq 131"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:c5:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:c5:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.string = "0"
device.description = "HD-Audio Generic"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profils :
HiFi: Play HiFi quality Music (sorties : 4, sources : 0, priorité : 40768, disponible : oui)
off: Éteint (sorties : 0, sources : 0, priorité : 0, disponible : oui)
Profil actif : HiFi
Ports :
[Out] HDMI4: HDMI / DisplayPort 4 Output (type: HDMI, priority: 1400, latency offset: 0 usec, not available)
Partie du(des) profil(s) : HiFi
[Out] HDMI3: HDMI / DisplayPort 3 Output (type: HDMI, priority: 1300, latency offset: 0 usec, not available)
Partie du(des) profil(s) : HiFi
[Out] HDMI2: HDMI / DisplayPort 2 Output (type: HDMI, priority: 1200, latency offset: 0 usec, not available)
Partie du(des) profil(s) : HiFi
[Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 1100, latency offset: 0 usec, available)
Propriétés :
device.product.name = "HDMI2.0 1x2"
Partie du(des) profil(s) : HiFi
neon@KDENeon:~$Pourquoi autant de différences entre 2 OS basés sur Ubuntu 22.04 LTS sur le même PC?
Hors ligne
#30 Le 16/07/2024, à 10:43
- CHP_1960
Re : Problemes avec la sortie HDMI sur mini PC Ryzen 9 9740HS
J'ai installé KDE Neon sur un SSD externe et je boote dessus.
Voici le résultat quand je boote sur un PC Intel sur lequel la sortie HDMI multi-canal fonctionne bien (donc même config. et paramètres pour les 2 PC) :
$ pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "15.99.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "15.99.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "15.99.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "15.99.1"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "15.99.1"
Module #5
Name: module-switch-on-connect
Argument:
Usage counter: n/a
Properties:
module.author = "Michael Terry"
module.description = "When a sink/source is added, switch to it or conditionally switch to it"
module.version = "15.99.1"
Module #6
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "15.99.1"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "15.99.1"
Module #8
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "15.99.1"
Module #9
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "15.99.1"
Module #10
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "15.99.1"
Module #11
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "15.99.1"
Module #12
Name: module-gsettings
Argument:
Usage counter: n/a
Properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "15.99.1"
Module #13
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "15.99.1"
Module #14
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "15.99.1"
Module #15
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "15.99.1"
Module #16
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "15.99.1"
Module #17
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "15.99.1"
Module #18
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "15.99.1"
Module #19
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "15.99.1"
Module #20
Name: module-snap-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Canonical Ltd"
module.description = "Ubuntu Snap policy management"
module.version = "15.99.1"
Module #21
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "15.99.1"
Module #22
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "15.99.1"
Sink #0
State: RUNNING
Name: alsa_output.pci-0000_00_1f.3.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 78643 / 120% / 4,75 dB, front-right: 78643 / 120% / 4,75 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
Latency: 4636 usec, configured 4000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3266 Analog"
alsa.id = "ALC3266 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd2030000 irq 157"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio (Latitude 11 5175 2-in-1)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability unknown)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, not available)
Active Port: analog-output-speaker
Formats:
pcm
Source #0
State: IDLE
Name: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: alsa_output.pci-0000_00_1f.3.analog-stereo
Latency: 0 usec, configured 2000000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd2030000 irq 157"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio (Latitude 11 5175 2-in-1)"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_00_1f.3.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 10387 / 16% / -48,00 dB, front-right: 10387 / 16% / -48,00 dB
balance 0,00
Base Volume: 6554 / 10% / -60,00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3266 Analog"
alsa.id = "ALC3266 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd2030000 irq 157"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio (Latitude 11 5175 2-in-1)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability unknown)
Active Port: analog-input-internal-mic
Formats:
pcm
Sink Input #3
Driver: protocol-native.c
Owner Module: 11
Client: 3
Sink: 0
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Buffer Latency: 19773 usec
Sink Latency: 4584 usec
Resample method: n/a
Properties:
media.name = "ALSA Playback"
application.name = "ALSA plug-in [fluidsynth]"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "1119"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "fluidsynth"
application.language = "C"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [fluidsynth]"
Client #0
Driver: module-systemd-login.c
Owner Module: 17
Properties:
application.name = "Login Session 1"
systemd-login.session = "1"
Client #1
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "fluidsynth"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "1119"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "fluidsynth"
application.language = "C"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
Client #3
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "ALSA plug-in [fluidsynth]"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "1119"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "fluidsynth"
application.language = "C"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
Client #4
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "kded6"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = ""
application.icon_name = ""
application.process.id = "1323"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "kded6"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
application.process.session_id = "1"
Client #5
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1323"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "kded6"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
application.process.session_id = "1"
Client #6
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = ""
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.kde.plasma-pa"
application.icon_name = ""
application.process.id = "1344"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "plasmashell"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
application.process.session_id = "1"
Client #7
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1344"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "plasmashell"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
application.process.session_id = "1"
Client #8
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "2446"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "pactl"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
application.process.session_id = "1"
Sample #0
Name: audio-volume-change
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Volume: (invalid)
balance 0,00
Duration: 0,3s
Size: 56,4 KiB
Lazy: no
Filename: n/a
Properties:
media.role = "event"
event.id = "audio-volume-change"
event.description = "Volume Control Feedback Sound"
media.name = "audio-volume-change"
media.filename = "/usr/share/sounds/ocean/stereo/audio-volume-change.oga"
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1344"
application.process.user = "neon"
application.process.host = "neon-usb"
application.process.binary = "plasmashell"
application.language = "fr_FR.UTF-8"
window.x11.display = ":1"
application.process.machine_id = "b5b33180b5204681b9e1b7c19ac7e3f1"
application.process.session_id = "1"
Card #0
Name: alsa_card.pci-0000_00_1f.3
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd2030000 irq 157"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio (Latitude 11 5175 2-in-1)"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 32833, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: yes)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: yes)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereoHors ligne
#31 Le 24/09/2024, à 07:33
- Lifesaver
Re : Problemes avec la sortie HDMI sur mini PC Ryzen 9 9740HS
J'utilise KDE Neon depuis quelques mois, aucun problème jusque là, c'était bien, mais là gros plantage depuis les dernières maj de kernel.
Le kernel 5.154.0-122 fonctionne bien.
Le 6.5.0-41 aboutit sur un écran noir
Le 6.8.0-45 lance bien la session, mais beaucoup de mes périphériques ne sont pas détectés, le plus embêtant pour dépanner étant l'absence de réseau lan et wlan :
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
Flags: bus master, fast devsel, latency 0, IOMMU group 1
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 122, IOMMU group 2
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: a3000000-a40fffff [size=17M]
Prefetchable memory behind bridge: 0000000090000000-00000000a1ffffff [size=288M]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04) (prog-if 00 [VGA controller])
DeviceName: Intel Kabylake HD Graphics GT2
Subsystem: Hewlett-Packard Company HD Graphics 630
Flags: bus master, fast devsel, latency 0, IRQ 255, IOMMU group 0
Memory at a2000000 (64-bit, non-prefetchable) [size=16M]
Memory at b0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
Flags: bus master, fast devsel, latency 0, IRQ 255, IOMMU group 3
Memory at a4520000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 129, IOMMU group 4
Memory at a4500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family Thermal Subsystem
Flags: bus master, fast devsel, latency 0, IRQ 255, IOMMU group 4
Memory at a4532000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)
Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family Serial IO I2C Controller
Flags: fast devsel, IRQ 255, IOMMU group 5
Memory at a4533000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family MEI Controller
Flags: fast devsel, IRQ 255, IOMMU group 6
Memory at a4534000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company HM170/QM170 Chipset SATA Controller [AHCI Mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 128, IOMMU group 7
Memory at a4530000 (32-bit, non-prefetchable) [size=8K]
Memory at a4537000 (32-bit, non-prefetchable) [size=256]
I/O ports at 5080 [size=8]
I/O ports at 5088 [size=4]
I/O ports at 5060 [size=32]
Memory at a4535000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 123, IOMMU group 8
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff [size=4K]
Memory behind bridge: 8d100000-8d2fffff [size=2M]
Prefetchable memory behind bridge: 000000008d300000-000000008d4fffff [size=2M]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 124, IOMMU group 9
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff [size=4K]
Memory behind bridge: a4400000-a44fffff [size=1M]
Prefetchable memory behind bridge: 000000008d500000-000000008d6fffff [size=2M]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #6 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 125, IOMMU group 10
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: a4300000-a43fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #7 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 126, IOMMU group 11
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: a4200000-a42fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 127, IOMMU group 12
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: a4100000-a41fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation HM175 Chipset LPC/eSPI Controller (rev 31)
Subsystem: Hewlett-Packard Company HM175 Chipset LPC/eSPI Controller
Flags: bus master, medium devsel, latency 0, IOMMU group 13
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family Power Management Controller
Flags: bus master, fast devsel, latency 0, IOMMU group 13
Memory at a452c000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
Subsystem: Hewlett-Packard Company CM238 HD Audio Controller
Flags: bus master, fast devsel, latency 32, IRQ 255, IOMMU group 13
Memory at a4528000 (64-bit, non-prefetchable) [size=16K]
Memory at a4510000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
Subsystem: Hewlett-Packard Company 100 Series/C230 Series Chipset Family SMBus
Flags: medium devsel, IRQ 255, IOMMU group 13
Memory at a4536000 (64-bit, non-prefetchable) [size=256]
I/O ports at 5040 [size=32]
01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] (rev a1)
Subsystem: Hewlett-Packard Company GP107M [GeForce GTX 1050 Mobile]
Flags: bus master, fast devsel, latency 0, IRQ 255, IOMMU group 2
Memory at a3000000 (32-bit, non-prefetchable) [size=16M]
Memory at 90000000 (64-bit, prefetchable) [size=256M]
Memory at a0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [disabled] [size=128]
Expansion ROM at a4080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nvidiafb
01:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1)
Subsystem: Hewlett-Packard Company GP107GL High Definition Audio Controller
Flags: fast devsel, IRQ 255, IOMMU group 2
Memory at a4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company RTS522A PCI Express Card Reader
Physical Slot: 4
Flags: fast devsel, IRQ 255, IOMMU group 14
Memory at a4400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
04:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61)
DeviceName: Intel Dual BandWireless-AC 7265 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter
Subsystem: Intel Corporation Dual Band Wireless-AC 7265
Flags: fast devsel, IRQ 255, IOMMU group 15
Memory at a4300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
DeviceName: Realtek PCIe GBE Family Controller
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 255, IOMMU group 16
I/O ports at 3000 [size=256]
Memory at a4204000 (64-bit, non-prefetchable) [size=4K]
Memory at a4200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
06:00.0 Non-Volatile memory controller: Sandisk Corp WD Black NVMe SSD (prog-if 02 [NVM Express])
Subsystem: Marvell Technology Group Ltd. WD Black NVMe SSD
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 17
Memory at a4100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvmeJe me suis raccroché à ce post car il est évident que nos problèmes sont les mêmes. KDE Neon n'est clairement pas aussi fiable que Kubuntu, c'est mieux côté plasma, mais côté kernel et dépendances il y a un réel problème.
Debian Stable
Hors ligne