Pages : 1
#1 Le 01/07/2024, à 16:07
- 65BéVé
[Réglé] Disque SSD PNY non modifiable.
Bonjour,
Il m'est impossible de modifier ou de formater un disque SSD PNY 250 Gig.
Je ne rencontre aucun message d'erreur genre "disque protégé en écriture"
Bien qu'il ne s'agisse pas d'une protection en écriture, j'ai lancé les différents outils de réparation avec Windows ou Linux (Diskpart Gparted).
Je peux écrire, faire des MAJ ou même formater le disque.
Le problème, c'est que toutes les modifications ont disparu au reboot du PC - retour au point de départ.
On dirait que le système lance un bon vieux Unformat ou Undelete de la période du MSDOS-5.
Bien sûr, ça fait un petit moment que j'ai investi 30€ dans un nouveau ssd.
Je voudrais juste avoir un avis sur la question avant de détruire et jeter ce disque.
Dernière modification par 65BéVé (Le 05/07/2024, à 17:51)
Salutations distinguées,
AMD64 + cg ASUS GT520 + cm Asus M2a-VMHDMI + 3x1024ram + 1DDx500G
UBUNTU 22.04
Hors ligne
#2 Le 01/07/2024, à 18:20
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
Bonjour.
Identifions le disque avec ses partitions.
lsblk -fe7Installe l'application smartmontools
et donne l'état du disque ( Chapitre trois).
Dernière modification par geole (Le 01/07/2024, à 18:28)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#3 Le 02/07/2024, à 21:32
- 65BéVé
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir geole,
Merci de prendre mon appel à l'aide.
@Lenovo-H535:~$ lsblk -fe7
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
sda
├─sda1 vfat FAT32 977D-0BEE 504,9M 1% /boot/efi
└─sda2 ext4 1.0 c7722fb1-b4e4-4350-ab64-cbfefa236cdb 842,3G 3% /var/snap/firefox/common/host-hunspell
/
sdb
sdc
├─sdc1 ntfs Récupération 1A38FB2F38FB0891
├─sdc2 vfat FAT32 E8FD-B664
├─sdc3
└─sdc4 ntfs 8CA203AEA2039BB8 69,3G 69% /media/bv/8CA203AEA2039BB8
sr0
bv@Lenovo-H535:~$
bv@Lenovo-H535:~$ sudo smartctl -s on -a /dev/sdc
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-41-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SATAFIRM S11
Serial Number: PNY291800214101006D3
LU WWN Device Id: 5 f8db4c 2918006d3
Firmware Version: SBFM61W2
User Capacity: 240057409536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Tue Jul 2 22:27:12 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3374
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 1467
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
170 Unknown_Attribute 0x0003 036 036 010 Pre-fail Always - 1352914698485
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 2228691
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 81
194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33)
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
231 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 96
241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 4511
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
bv@Lenovo-H535:~$ Salutations distinguées,
AMD64 + cg ASUS GT520 + cm Asus M2a-VMHDMI + 3x1024ram + 1DDx500G
UBUNTU 22.04
Hors ligne
#4 Le 02/07/2024, à 21:51
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
je vois que ce disque dispose de 4 partitions. Dont certaines en NTFS alors que tu ne disposes pas de windows.
A titre d'essai, supprime les quatres partitions et fabrique une seule partition au format EXT4 puis débranche le disque, rebranche-le et redonne le retour de la commande lsblk -fe7
Puis tu rebootes et tu redonnes de nouveau le contenu de cette commande.
On verra alors si tu as de nouveau quatre partitions ou une seule.
Dis aussi avec quelle application tu fais ces actions.
Dernière modification par geole (Le 02/07/2024, à 21:54)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 03/07/2024, à 22:22
- 65BéVé
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir geole,
1) Formatage du disque avec Gparted/Ubuntu22 ne fonctionne pas.
2) MiniTool Wizard FreeWare pour W10. J'ai installé ce truc sur mon dualboot W10.
J'ai lancé la suppression des partitions et au bout de 3heures, il en est à peine à 30%.
Je vais le laisser finir tout seul et aller me coucher. merci et à demain.
Salutations distinguées,
AMD64 + cg ASUS GT520 + cm Asus M2a-VMHDMI + 3x1024ram + 1DDx500G
UBUNTU 22.04
Hors ligne
#6 Le 03/07/2024, à 22:50
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir.
1) Merci de faire des captures d'écran de gparted et de les publier dans un site partage et de donner le lien et s'il indique un message d'erreur, merci de le publier.chapitre sept.
2) Probablement pas la bonne solution.
Dernière modification par geole (Le 03/07/2024, à 22:53)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 04/07/2024, à 08:06
- iznobe
Re : [Réglé] Disque SSD PNY non modifiable.
Bonjour , plutot que de vouloir supprimer les partitions , il est peut etre preferable de creer une nouvelle table de partitions , ca sera certainement plus rapide et propre .
Il faudrait aussi verifier si le firmware de ce disque est bien en derniere version .
Dommage qu ' on ait pas le rapport smartctl , ca donnerait dejà beaucoup d' informations qui pourrait faire avancer la discussion .
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#8 Le 04/07/2024, à 08:50
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
Bonjour iznobe.
Lis le second retour de l'échange trois."Firmware Version: SBFM61W2" pour un SATAFIRM S1
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3374Je viens de trouver cet échange.
Dernière modification par geole (Le 04/07/2024, à 10:07)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#9 Le 04/07/2024, à 09:12
- iznobe
Re : [Réglé] Disque SSD PNY non modifiable.
Salut geole , j ' avais pas vu ...
d' apres une rapide recherche sur le net , le probleme est assez frequent .
la solution consiste a mettre le firmware à jour , ca effacera les données présentes sur le disque .
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#10 Le 04/07/2024, à 10:13
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
Donc à essayer https://www.pny.com/company/support/solid-state-drives
cliquer sur SATA SSD TOOLBOX AND FIRMWARE UPDATER
pour télécharger le logiciel qui convient.
Mais je crains qu'il faille un windows.
Dernière modification par geole (Le 04/07/2024, à 10:19)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#11 Le 04/07/2024, à 18:00
- 65BéVé
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir iznobe et geole,
J'ai passé le programme "firmware updater" à partir de W10 sur mon disque PNY et tout a été effacé.
Sauf que tout W8 et ses données sont réapparus après le reboot.
Je pense que la prochaine étape c'est le coulage dans une chape de béton.
Merci pour vos conseils.
Salutations distinguées,
AMD64 + cg ASUS GT520 + cm Asus M2a-VMHDMI + 3x1024ram + 1DDx500G
UBUNTU 22.04
Hors ligne
#12 Le 04/07/2024, à 18:21
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
Il n'est pas obligé qu'une mise à jour de firmware supprime les données. Elle ne devrait même jamais les supprimer.
Même plus, il n'est pas obligé qu'une suppression de partition et recréation de partition à l'identique fasse disparaître les données.
Tu devrais redonner un rapport smartctl
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#13 Le 04/07/2024, à 20:42
- moko138
Re : [Réglé] Disque SSD PNY non modifiable.
À geole :
(Je ne fais que passer). Maintenant que la mise à jour du micrologiciel est faite, ne serait-il pas intéressant d'essayer parted ou gdisk pour détruire et recréer les tables de partitions ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 04/07/2024, à 21:39
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir moko138
Content de te voir. J attend la vérification de la mise à jour du firmware pour suivre cette piste
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#15 Le 04/07/2024, à 21:42
- 65BéVé
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir tout le monde,
Rectificatif : le logiciel PNY-Toolbox sous W10 ne peut pas faire la MAJ car il ne trouve pas (dit-il) l'update.
Par contre les options optimization et SecureErase fonctionnent bien sans signaler d'erreurs.
Après reboot on revient à la case départ.
====> smartctl
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-41-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SATAFIRM S11
Serial Number: PNY291800214101006D3
LU WWN Device Id: 5 f8db4c 2918006d3
Firmware Version: SBFM61W2
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Thu Jul 4 22:35:41 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 16
9 Power_On_Hours -O--C- 100 100 000 - 3383
12 Power_Cycle_Count -O--C- 100 100 000 - 1468
168 Unknown_Attribute -O--C- 100 100 000 - 0
170 Unknown_Attribute PO---- 036 036 010 - 1352914698485
173 Unknown_Attribute -O--C- 100 100 000 - 2228691
192 Power-Off_Retract_Count -O--C- 100 100 000 - 82
194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33)
218 Unknown_Attribute PO-R-- 100 100 050 - 0
231 Unknown_SSD_Attribute PO--C- 100 100 000 - 96
241 Total_LBAs_Written -O--C- 100 100 000 - 4827
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 16
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 16 [15] occurred at disk power-on lifetime: 9 hours (0 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 15 [14] occurred at disk power-on lifetime: 9 hours (0 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 0c 11 60 c0 4c 00 Device Fault; Error: UNC 128 sectors at LBA = 0x0c1160c0 = 202465472
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0c 11 60 c0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 02 7b de 80 42 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 22 3a e0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 02 7b de 00 42 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 25 74 60 4c 00 00:00:00.000 READ DMA EXT
Error 14 [13] occurred at disk power-on lifetime: 9 hours (0 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 13 [12] occurred at disk power-on lifetime: 9 hours (0 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 12 [11] occurred at disk power-on lifetime: 9 hours (0 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 0c 11 60 c0 4c 00 Device Fault; Error: UNC 128 sectors at LBA = 0x0c1160c0 = 202465472
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0c 11 60 c0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 01 bd cf 00 41 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 22 3a e0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 01 bd ce 80 41 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 25 74 60 4c 00 00:00:00.000 READ DMA EXT
Error 11 [10] occurred at disk power-on lifetime: 9 hours (0 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 10 [9] occurred at disk power-on lifetime: 9 hours (0 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 0c 11 60 c0 4c 00 Device Fault; Error: UNC 128 sectors at LBA = 0x0c1160c0 = 202465472
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0c 11 60 c0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 02 7b de 80 42 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 22 3a e0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 02 7b de 00 42 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 25 74 60 4c 00 00:00:00.000 READ DMA EXT
Error 9 [8] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 8 [7] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 7 [6] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 0c 11 60 c0 4c 00 Device Fault; Error: UNC 128 sectors at LBA = 0x0c1160c0 = 202465472
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0c 11 60 c0 4c 00 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 08 45 fb 00 48 00 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 08 45 fb 18 48 00 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 08 47 9b b8 48 00 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 08 45 fe 10 48 00 00:00:00.000 READ DMA EXT
Error 6 [5] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 5 [4] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 0c 11 60 c0 4c 00 Device Fault; Error: UNC 128 sectors at LBA = 0x0c1160c0 = 202465472
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0c 11 60 c0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 00 85 64 50 40 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 22 3a e0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 00 85 63 d0 40 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 25 74 60 4c 00 00:00:00.000 READ DMA EXT
Error 4 [3] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 0c 11 60 c0 4c 00 Device Fault; Error: UNC 128 sectors at LBA = 0x0c1160c0 = 202465472
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0c 11 60 c0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 08 00 00 0b ca fe e8 4b 00 00:00:00.000 WRITE DMA EXT
35 00 00 00 80 00 00 0b ca fe 68 4b 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 08 00 00 0c 11 69 28 4c 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 0c 11 68 a8 4c 00 00:00:00.000 READ DMA EXT
Error 3 [2] occurred at disk power-on lifetime: 7 hours (0 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 2 [1] occurred at disk power-on lifetime: 7 hours (0 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 1a 9a 53 28 4a 00 Device Fault; Error: UNC 128 sectors at LBA = 0x1a9a5328 = 446321448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1a 9a 53 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 52 28 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 a8 4a 00 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 1a 9a 51 28 4a 00 00:00:00.000 READ DMA EXT
Error 1 [0] occurred at disk power-on lifetime: 7 hours (0 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 71 00 80 00 00 0c 11 60 c0 4c 00 Device Fault; Error: UNC 128 sectors at LBA = 0x0c1160c0 = 202465472
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0c 11 60 c0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 07 cf 09 40 47 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 22 3a e0 4c 00 00:00:00.000 READ DMA EXT
35 00 00 00 80 00 00 07 cf 08 c0 47 00 00:00:00.000 WRITE DMA EXT
25 00 00 00 80 00 00 0c 25 74 60 4c 00 00:00:00.000 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 1468 --- Lifetime Power-On Resets
0x01 0x010 4 3383 --- Power-on Hours
0x01 0x018 6 10124416541 --- Logical Sectors Written
0x01 0x028 6 14867185723 --- Logical Sectors Read
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 16 --- Number of Reported Uncorrectable Errors
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 33 --- Current Temperature
0x05 0x020 1 33 --- Highest Temperature
0x05 0x028 1 33 --- Lowest Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 3 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC Salutations distinguées,
AMD64 + cg ASUS GT520 + cm Asus M2a-VMHDMI + 3x1024ram + 1DDx500G
UBUNTU 22.04
Hors ligne
#16 Le 04/07/2024, à 21:49
- 65BéVé
Re : [Réglé] Disque SSD PNY non modifiable.
Re bonsoir,
Voilà ce que donne gdisk.
bvi@Lenovo-H535:~$ sudo gdisk
[sudo] Mot de passe de bvi :
GPT fdisk (gdisk) version 1.0.8
Type device filename, or press <Enter> to exit: /dev/sdc
Warning! Disk size is smaller than the main header indicates! Loading
secondary header from the last sector of the disk! You should use 'v' to
verify disk integrity, and perhaps options on the experts' menu to repair
the disk.
Caution: invalid backup GPT header, but valid main header; regenerating
backup header from main header.
Warning! Error 0 reading partition table for CRC check!
Warning! One or more CRCs don't match. You should repair the disk!
Main header: OK
Backup header: ERROR
Main partition table: OK
Backup partition table: ERROR
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: damaged
****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************
Command (? for help):
Salutations distinguées,
AMD64 + cg ASUS GT520 + cm Asus M2a-VMHDMI + 3x1024ram + 1DDx500G
UBUNTU 22.04
Hors ligne
#17 Le 04/07/2024, à 22:19
- geole
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir.
Si la mise à jour du firmware ne s'est pas faite, soit tu demandes au fabriquant le pourquoi, soit tu changes de fournisseur.
Je crois que tu es parti sur la seconde solution.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#18 Le 05/07/2024, à 08:41
- iznobe
Re : [Réglé] Disque SSD PNY non modifiable.
le soucis , c ' est qu ' il ne devrait pas apparraitre :
" Device Model: SATAFIRM S11 " mais le vrai modele de ton disque a la place .
il y a des vidéos sur le net qui montre comment faire ( attention a ce que ca corresponde bien au modele de ton disque lorsque tu choisis le fichier du firmware du disque ) , perso , je n ' ai jamais vu de tel cas . Mais y en a pléthore ...
Si tu veux recuperer ce disque , je t ' invite a te pencher serieusement sur les vidéos qui montrent comment faire , c' est la seule maniere à mon avis .
https://www.youtube.com/watch?v=OoDZlJjTc_I
Dernière modification par iznobe (Le 05/07/2024, à 08:48)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#19 Le 05/07/2024, à 17:18
- 65BéVé
Re : [Réglé] Disque SSD PNY non modifiable.
Bonsoir,
Avec gdisk, j'ai supprimé les 4 partitions du SSD.
Au reboot du PC elles sont revenues.
Donc j'arrête les frais.
Voir le traitement prévu au #11.
Je vous remercie beaucoup de m'avoir guidé sur ce problème.
Salutations distinguées,
AMD64 + cg ASUS GT520 + cm Asus M2a-VMHDMI + 3x1024ram + 1DDx500G
UBUNTU 22.04
Hors ligne