{RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

aucito · Le 06/05/2024, à 16:51

Bonjour. Pour l'installation de cette imprimante sur Xubuntu 64 bits, en partant du site d'Epson, j'arrive au ppd demandé (Epson-AL-C1100-fm3.ppd) et à l'installer.
Mais quand je souhaite imprimer page de test, le système me signale que le pilote est manquant et réclame l'installation de pstoalc1100.sh
Pouvez-vous m'aider car il y a bien un tel fichier texte dans le répertoire Epson-ALC1100-filter-1.2
Et même en le rendant exécutable comme programme, et en double-cliquant dessus, rien ne s'installe..?
Merci d'avance.

Résolu.Bien sur j'avais installé tout ce qui était conseillé notamment dans README alc1100
ghostscript
psutils
glibc
sed
grep
gawk
bc
sauf le glibc introuvable

Maisp lutôt que de simplement désarchiver Epson-ALC1100-filter-1.2.tar.gz,( obtenu à partir du site d'Epson), par gestionnaire d'archive inhérent au système installé, j'ai recouru, dans le répertoire Téléchargements à la commande, tar -zxvf Epson-ALC1100-filter-1.2.tar.gz ce qui donne 4 fichiers dont un .deb et des i386.. qu'on ne trouve pas par le gestionnaire d'archuve..
Ensuite ouvrir un terminal dans le même répertoire et taper sudo dpkg --force-all -i *.deb ce qui force l'installation, si j'ai bien compris. Et le logiciel pstoalc1100.sh semble alors installé car l'imprimante imprime page de test et en plus elle s'est installée à côté de celle installée avec gestionnaire d'archive, mais avec EPSON devant pour la différencier. Maintenant la première installation s'est mise à fonctionner aussi.. (?}
Je me suis inspiré en grande partie du post https://forum.ubuntu-fr.org/viewtopic.php?id=602841

Dernière modification par aucito (Le 09/05/2024, à 12:15)

xubu1957 · Le 06/05/2024, à 17:06

Bonjour,

As-tu consulté la Doc liste_imprimantes_epson#modeles ?

aucito · Le 06/05/2024, à 18:35

Bonjour Xubu.
Oui je viens de lire avec attention tout ce que me conseille votre lien. Et j'ai installé ce qui y est proposé..
Une commande que je pense pas comprendre c'est cd suivi du nom du répertoire récemment extrait.. le terminal me répond qu'il n'y a pas de fichier ou de dossier de ce nom, à savoir ici Epson-ALC1100-filter-1.2 qui se trouve dans Téléchargements.. Bon je me suis mis dans le répertoire et y ai ouvert un terminal pour écrire

./configure
make
sudo make install

J'essaie avec les balises codes mais j'ai oublié comment on fait.. Je vais essayer ci-dessous

aucito@aucito-ThinkPad-W500:~/Téléchargements/Epson-ALC1100-filter-1.2$ ./configure
make
sudo make install
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking for a BSD-compatible install... /usr/bin/install -c
checking for gawk... (cached) gawk
checking for rpmbuild... rpmbuild
checking for cups-config... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
make  all-am
make[1] : on entre dans le répertoire « /home/aucito/Téléchargements/Epson-ALC1100-filter-1.2 »
make[1] : on quitte le répertoire « /home/aucito/Téléchargements/Epson-ALC1100-filter-1.2 »
[sudo] Mot de passe de aucito : 
make[1] : on entre dans le répertoire « /home/aucito/Téléchargements/Epson-ALC1100-filter-1.2 »
/bin/bash ./mkinstalldirs /usr/local/bin
 /usr/bin/install -c pstoalc1100.sh /usr/local/bin/pstoalc1100.sh
 /usr/bin/install -c alc1100_lprwrapper.sh /usr/local/bin/alc1100_lprwrapper.sh
make  install-exec-hook
make[2] : on entre dans le répertoire « /home/aucito/Téléchargements/Epson-ALC1100-filter-1.2 »
/bin/bash ./mkinstalldirs /usr/local/bin
/usr/bin/install -c ./alc1100 /usr/local/bin
/bin/bash ./mkinstalldirs /usr/local/etc/epkowa/alc1100
mkdir -p -- /usr/local/etc/epkowa/alc1100
/usr/bin/install -c -m 644 ./option.conf /usr/local/etc/epkowa/alc1100
/bin/bash ./mkinstalldirs /usr/share/cups/model
/usr/bin/install -c -m 644 ./ppd/Epson-AL-C1100-fm3.ppd /usr/share/cups/model
make[2] : on quitte le répertoire « /home/aucito/Téléchargements/Epson-ALC1100-filter-1.2 »
make[1]: rien à faire pour « install-data-am ».
make[1] : on quitte le répertoire « /home/aucito/Téléchargements/Epson-ALC1100-filter-1.2 »
aucito@aucito-ThinkPad-W500:~/Téléchargements/Epson-ALC1100-filter-1.2$

xubu1957 · Le 06/05/2024, à 19:51

Et en redémarrant l'ordi, l'imprimante fonctionne ?

Montre :

cat /etc/lsb-release && uname -ir && groups && lsusb

dpkg -l | grep epson

et :

dpkg -l | grep -v ^ii

Dernière modification par xubu1957 (Le 06/05/2024, à 19:52)

aucito · Le 06/05/2024, à 20:05

aucito@aucito-ThinkPad-W500:~$ cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=22.04
DISTRIB_CODENAME=jammy
DISTRIB_DESCRIPTION="Ubuntu 22.04.4 LTS"
6.5.0-28-generic x86_64
aucito adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 002 Device 002: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy A5 (MTP)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04b8:0007 Seiko Epson Corp. Printer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
aucito@aucito-ThinkPad-W500:~$ dpkg -l | grep epson
aucito@aucito-ThinkPad-W500:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                                 Architecture Description
+++-==========================================-=======================================-============-================================================================================
rc  foomatic-filters                           4.0.17-13                               amd64        OpenPrinting printer support - filters
rc  hplip                                      3.21.12+dfsg0-1                         amd64        HP Linux Printing and Imaging System (HPLIP)
rc  libsane-hpaio:amd64                        3.21.12+dfsg0-1                         amd64        HP SANE backend for multi-function peripherals
rc  linux-image-6.5.0-18-generic               6.5.0-18.18~22.04.1                     amd64        Signed kernel image generic
rc  linux-modules-6.5.0-18-generic             6.5.0-18.18~22.04.1                     amd64        Linux kernel extra modules for version 6.5.0 on 64 bit x86 SMP
rc  linux-modules-extra-6.5.0-18-generic       6.5.0-18.18~22.04.1                     amd64        Linux kernel extra modules for version 6.5.0 on 64 bit x86 SMP
aucito@aucito-ThinkPad-W500:~$

xubu1957 · Le 06/05/2024, à 20:09

Il faut attendre des aidants connaisseurs.

Montre aussi :

Dans le tutoriel épinglé, sylvain3800 a écrit :

B.2 ) Les infos a donner quel que soit la marque de l'imprimante
il suffit de copier/coller ces commandes :
dpkg -l | grep cups
lpstat -t
/usr/sbin/lpinfo -v
cat /var/log/cups/error_log

Dernière modification par xubu1957 (Le 06/05/2024, à 20:10)

aucito · Le 06/05/2024, à 20:45

aucito@aucito-ThinkPad-W500:~$ dpkg -l | grep cups
ii  cups                                       2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                               1.28.15-0ubuntu1.2                      amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                   2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                2.4.1op1-1ubuntu4.8                     all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                          2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                                2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                               1.28.15-0ubuntu1.2                      amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers                  1.28.15-0ubuntu1.2                      amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                             2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                             0.2.6-1ubuntu5                          amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                  2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                         2.4.1op1-1ubuntu4.8                     all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                             2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - Core library
ii  libcups2-dev:amd64                         2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - Development files CUPS library
ii  libcupsfilters-dev:amd64                   1.28.15-0ubuntu1.2                      amd64        OpenPrinting CUPS Filters - Development files for the library
ii  libcupsfilters1:amd64                      1.28.15-0ubuntu1.2                      amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                        2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - Raster image library
ii  libcupsimage2-dev:amd64                    2.4.1op1-1ubuntu4.8                     amd64        Common UNIX Printing System(tm) - Development files CUPS image library
ii  python3-cups:amd64                         2.0.1-5build1                           amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                        1.5.16-0ubuntu3                         all          Python utility modules around the CUPS printing system
aucito@aucito-ThinkPad-W500:~$

aucito · Le 06/05/2024, à 20:46

aucito@aucito-ThinkPad-W500:~$ lpstat -t
scheduler is running
system default destination: EPSON-AL-C1100
matériel pour EPSON-AL-C1100 : usb://EPSON/AL-C1100?serial=31PF9FZ11983850914
matériel pour Generic-CUPS-BRF-Printer-2 : cups-brf:/
EPSON-AL-C1100 accepte des requêtes depuis lun 06 mai 2024 19:58:54
Generic-CUPS-BRF-Printer-2 accepte des requêtes depuis dim 05 mai 2024 19:38:14
printer EPSON-AL-C1100 is idle.  enabled since lun 06 mai 2024 19:58:54
	Filter failed
printer Generic-CUPS-BRF-Printer-2 is idle.  enabled since dim 05 mai 2024 19:38:14
aucito@aucito-ThinkPad-W500:~$

aucito · Le 06/05/2024, à 20:47

aucito@aucito-ThinkPad-W500:~$ /usr/sbin/lpinfo -v
serial serial:/dev/ttyS4?baud=115200
file cups-brf:/
network https
network beh
network ipps
network lpd
network ipp
network http
network socket
direct usb://EPSON/AL-C1100?serial=31PF9FZ11983850914
aucito@aucito-ThinkPad-W500:~$

aucito · Le 06/05/2024, à 20:50

D [06/May/2024:20:16:39 +0200] [Client 43] POST / HTTP/1.1
D [06/May/2024:20:16:39 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:16:39 +0200] [Client 43] Read: status=200, state=6
D [06/May/2024:20:16:39 +0200] [Client 43] No authentication data provided.
D [06/May/2024:20:16:39 +0200] [Client 43] 2.0 CUPS-Get-Printers 5
D [06/May/2024:20:16:39 +0200] CUPS-Get-Printers
D [06/May/2024:20:16:39 +0200] [Client 43] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [06/May/2024:20:16:39 +0200] [Client 43] Content-Length: 346
D [06/May/2024:20:16:39 +0200] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:16:39 +0200] [Client 43] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:39 +0200] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=346, response=0x5eee4cfc7570(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:16:39 +0200] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:16:39 +0200] [Client 43] bytes=0, http_state=0, data_remaining=346
D [06/May/2024:20:16:39 +0200] [Client 43] Flushing write buffer.
D [06/May/2024:20:16:39 +0200] [Client 43] New state is HTTP_STATE_WAITING
D [06/May/2024:20:16:39 +0200] [Client 43] Waiting for request.
D [06/May/2024:20:16:39 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:16:39 +0200] [Client 43] POST / HTTP/1.1
D [06/May/2024:20:16:39 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:16:39 +0200] [Client 43] Read: status=200, state=6
D [06/May/2024:20:16:39 +0200] [Client 43] No authentication data provided.
D [06/May/2024:20:16:39 +0200] [Client 43] 2.0 CUPS-Get-Printers 6
D [06/May/2024:20:16:39 +0200] CUPS-Get-Printers
D [06/May/2024:20:16:39 +0200] [Client 43] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [06/May/2024:20:16:39 +0200] [Client 43] Content-Length: 824
D [06/May/2024:20:16:39 +0200] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:16:39 +0200] [Client 43] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:39 +0200] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=824, response=0x5eee4cfa0c00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:16:39 +0200] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:16:39 +0200] [Client 43] bytes=0, http_state=0, data_remaining=824
D [06/May/2024:20:16:39 +0200] [Client 43] Flushing write buffer.
D [06/May/2024:20:16:39 +0200] [Client 43] New state is HTTP_STATE_WAITING
D [06/May/2024:20:16:39 +0200] [Client 43] Waiting for request.
D [06/May/2024:20:16:39 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:16:39 +0200] [Client 43] POST / HTTP/1.1
D [06/May/2024:20:16:39 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:16:39 +0200] [Client 43] Read: status=200, state=6
D [06/May/2024:20:16:39 +0200] [Client 43] No authentication data provided.
D [06/May/2024:20:16:39 +0200] [Client 43] 2.0 Get-Jobs 7
D [06/May/2024:20:16:39 +0200] Get-Jobs ipp://localhost/
D [06/May/2024:20:16:39 +0200] [Client 43] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost.
D [06/May/2024:20:16:39 +0200] [Client 43] Content-Length: 75
D [06/May/2024:20:16:39 +0200] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:16:39 +0200] [Client 43] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:39 +0200] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5eee4cfc6de0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:16:39 +0200] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:16:39 +0200] [Client 43] bytes=0, http_state=0, data_remaining=75
D [06/May/2024:20:16:39 +0200] [Client 43] Flushing write buffer.
D [06/May/2024:20:16:39 +0200] [Client 43] New state is HTTP_STATE_WAITING
D [06/May/2024:20:16:39 +0200] [Client 43] Waiting for request.
D [06/May/2024:20:16:39 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:16:39 +0200] [Client 43] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:16:39 +0200] [Client 43] Closing connection.
D [06/May/2024:20:16:39 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [06/May/2024:20:16:40 +0200] Expiring subscriptions...
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:16:56 +0200] [Client 45] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:16:56 +0200] [Client 45] Accepted from localhost (Domain)
D [06/May/2024:20:16:56 +0200] [Client 45] Waiting for request.
I [06/May/2024:20:16:56 +0200] Expiring subscriptions...
D [06/May/2024:20:16:56 +0200] cupsdAddCert: Adding certificate for PID 0
D [06/May/2024:20:16:56 +0200] [Client 45] POST / HTTP/1.1
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [06/May/2024:20:16:56 +0200] [Client 45] Read: status=200, state=6
D [06/May/2024:20:16:56 +0200] [Client 45] No authentication data provided.
D [06/May/2024:20:16:56 +0200] [Client 45] 2.0 CUPS-Get-Devices 1
D [06/May/2024:20:16:56 +0200] CUPS-Get-Devices
D [06/May/2024:20:16:56 +0200] cupsdIsAuthorized: username=""
D [06/May/2024:20:16:56 +0200] [Client 45] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [06/May/2024:20:16:56 +0200] [Client 45] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [06/May/2024:20:16:56 +0200] [Client 45] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [06/May/2024:20:16:56 +0200] [Client 45] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:16:56 +0200] [Client 45] Closing connection.
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:16:56 +0200] [Client 46] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:16:56 +0200] [Client 46] Accepted from localhost (Domain)
D [06/May/2024:20:16:56 +0200] [Client 46] Waiting for request.
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [06/May/2024:20:16:56 +0200] [Client 47] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:16:56 +0200] [Client 47] Accepted from localhost (Domain)
D [06/May/2024:20:16:56 +0200] [Client 47] Waiting for request.
D [06/May/2024:20:16:56 +0200] [Client 46] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:16:56 +0200] [Client 46] Closing connection.
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:16:56 +0200] [Client 48] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:16:56 +0200] [Client 48] Accepted from localhost (Domain)
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for request.
D [06/May/2024:20:16:56 +0200] [Client 47] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:16:56 +0200] [Client 47] Closing connection.
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:16:56 +0200] [Client 48] POST / HTTP/1.1
D [06/May/2024:20:16:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:16:56 +0200] [Client 48] Read: status=200, state=6
D [06/May/2024:20:16:56 +0200] [Client 48] Authorized as aucito using PeerCred.
D [06/May/2024:20:16:56 +0200] [Client 48] 2.0 CUPS-Get-Devices 1
D [06/May/2024:20:16:56 +0200] CUPS-Get-Devices
D [06/May/2024:20:16:56 +0200] cupsdIsAuthorized: username="aucito"
D [06/May/2024:20:16:56 +0200] [Client 48] AppArmor profile is 'unconfined'.
D [06/May/2024:20:16:56 +0200] [Client 48] Not a snap - allowed.
D [06/May/2024:20:16:56 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [06/May/2024:20:16:56 +0200] [CGI] argv[1] = "1"
D [06/May/2024:20:16:56 +0200] [CGI] argv[2] = "0"
D [06/May/2024:20:16:56 +0200] [CGI] argv[3] = "15"
D [06/May/2024:20:16:56 +0200] [CGI] argv[4] = "7"
D [06/May/2024:20:16:56 +0200] [CGI] argv[5] = "requested-attributes=all"
D [06/May/2024:20:16:56 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [06/May/2024:20:16:56 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [06/May/2024:20:16:56 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [06/May/2024:20:16:56 +0200] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
D [06/May/2024:20:16:56 +0200] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
D [06/May/2024:20:16:56 +0200] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
D [06/May/2024:20:16:56 +0200] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
D [06/May/2024:20:16:56 +0200] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
D [06/May/2024:20:16:56 +0200] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [06/May/2024:20:16:56 +0200] [CGI] envp[9] = "SERVER_ADMIN=root@aucito-ThinkPad-W500"
D [06/May/2024:20:16:56 +0200] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.1"
D [06/May/2024:20:16:56 +0200] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
D [06/May/2024:20:16:56 +0200] [CGI] envp[12] = "USER=root"
D [06/May/2024:20:16:56 +0200] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
D [06/May/2024:20:16:56 +0200] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
D [06/May/2024:20:16:56 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [06/May/2024:20:16:56 +0200] [CGI] envp[16] = "AUTH_TYPE=PeerCred"
D [06/May/2024:20:16:56 +0200] [CGI] envp[17] = "LANG=fr_BE.UTF8"
D [06/May/2024:20:16:56 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
D [06/May/2024:20:16:56 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
D [06/May/2024:20:16:56 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
D [06/May/2024:20:16:56 +0200] [CGI] envp[21] = "SERVER_PORT=0"
D [06/May/2024:20:16:56 +0200] [CGI] envp[22] = "REMOTE_ADDR=localhost"
D [06/May/2024:20:16:56 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
D [06/May/2024:20:16:56 +0200] [CGI] envp[24] = "SCRIPT_NAME=/"
D [06/May/2024:20:16:56 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [06/May/2024:20:16:56 +0200] [CGI] envp[26] = "REMOTE_USER=aucito"
D [06/May/2024:20:16:56 +0200] [CGI] envp[27] = "SERVER_PROTOCOL=HTTP/1.1"
D [06/May/2024:20:16:56 +0200] [CGI] envp[28] = "HTTP_USER_AGENT=CUPS/2.4.1 (Linux 6.5.0-28-generic; x86_64) IPP/2.0"
D [06/May/2024:20:16:56 +0200] [CGI] envp[29] = "REQUEST_METHOD=POST"
D [06/May/2024:20:16:56 +0200] [CGI] envp[30] = "CONTENT_LENGTH=75"
D [06/May/2024:20:16:56 +0200] [CGI] envp[31] = "CONTENT_TYPE=application/ipp"
D [06/May/2024:20:16:56 +0200] cupsdAddCert: Adding certificate for PID 2359
D [06/May/2024:20:16:56 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 2359)
I [06/May/2024:20:16:56 +0200] [Client 48] Started "/usr/lib/cups/daemon/cups-deviced" (pid=2359, file=11)
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 2360)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 2361)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 2362)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 2363)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 2364)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 2365)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless-fax (PID 2366)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 2367)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 2368)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 2369)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 2370)
D [06/May/2024:20:16:56 +0200] [CGI] Started ippfind (PID 2372)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 2373)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 2374)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 2375)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 2376)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 2377)
D [06/May/2024:20:16:56 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 2378)
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] Script header: Content-Type: application/ipp
D [06/May/2024:20:16:56 +0200] [Client 48] Script header: 
D [06/May/2024:20:16:56 +0200] [Client 48] Sending status 200 for CGI.
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"ipp\"...
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"cups-brf:/\"...
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"beh\"...
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2363 (ipp) exited with no errors.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2366 (driverless-fax) exited with no errors.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2367 (implicitclass) exited with no errors.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2373 (cups-brf) exited with no errors.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2376 (beh) exited with no errors.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2377 (parallel) exited with no errors.
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"ipps\"...
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"lpd\"...
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2378 (lpd) exited with no errors.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2368 (mdns) exited with no errors.
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"socket\"...
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2375 (socket) exited with no errors.
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"serial:/dev/ttyS4?baud=115200\"...
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2364 (serial) exited with no errors.
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"http\"...
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [CGI] Loaded 118 quirks.
D [06/May/2024:20:16:56 +0200] [CGI] list_devices
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2369 (http) exited with no errors.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2365 (ipps) exited with no errors.
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"https\"...
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2374 (https) exited with no errors.
D [06/May/2024:20:16:56 +0200] [CGI] libusb_get_device_list=10
D [06/May/2024:20:16:56 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:56 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:16:56 +0200] [cups-deviced] Found device \"usb://EPSON/AL-C1100?serial=31PF9FZ11983850914\"...
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:56 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:56 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:56 +0200] [cups-deviced] PID 2361 (usb) exited with no errors.
D [06/May/2024:20:16:57 +0200] [CGI] sent=0, count=0
I [06/May/2024:20:16:57 +0200] Expiring subscriptions...
D [06/May/2024:20:16:57 +0200] [CGI] ippfind (PID 2372) exited with no errors.
D [06/May/2024:20:16:57 +0200] [cups-deviced] PID 2360 (driverless) exited with no errors.
D [06/May/2024:20:16:58 +0200] [CGI] sent=0, count=0
D [06/May/2024:20:16:58 +0200] [cups-deviced] PID 2362 (dnssd) exited with no errors.
I [06/May/2024:20:16:58 +0200] Expiring subscriptions...
D [06/May/2024:20:16:58 +0200] [cups-deviced] PID 2370 (snmp) exited with no errors.
D [06/May/2024:20:16:58 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:58 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:58 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:58 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:58 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:58 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:58 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:58 +0200] [Client 48] CGI data ready to be sent.
D [06/May/2024:20:16:58 +0200] PID 2359 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [06/May/2024:20:16:58 +0200] [Client 48] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:16:58 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2359, file=11
D [06/May/2024:20:16:58 +0200] [Client 48] Waiting for CGI data.
D [06/May/2024:20:16:58 +0200] [Client 48] Sending 0-length chunk.
D [06/May/2024:20:16:58 +0200] [Client 48] Flushing write buffer.
D [06/May/2024:20:16:58 +0200] [Client 48] New state is HTTP_STATE_WAITING
D [06/May/2024:20:16:58 +0200] [Client 48] Waiting for request.
D [06/May/2024:20:16:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:16:58 +0200] [Client 48] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:16:58 +0200] [Client 48] Closing connection.
D [06/May/2024:20:16:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [06/May/2024:20:16:59 +0200] Expiring subscriptions...
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 49] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:31:08 +0200] [Client 49] Accepted from localhost (Domain)
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
I [06/May/2024:20:31:08 +0200] Expiring subscriptions...
D [06/May/2024:20:31:08 +0200] cupsdAddCert: Adding certificate for PID 0
D [06/May/2024:20:31:08 +0200] Report: clients=1
D [06/May/2024:20:31:08 +0200] Report: jobs=1
D [06/May/2024:20:31:08 +0200] Report: jobs-active=0
D [06/May/2024:20:31:08 +0200] Report: printers=2
D [06/May/2024:20:31:08 +0200] Report: stringpool-string-count=2285
D [06/May/2024:20:31:08 +0200] Report: stringpool-alloc-bytes=10600
D [06/May/2024:20:31:08 +0200] Report: stringpool-total-bytes=46856
D [06/May/2024:20:31:08 +0200] [Client 49] POST / HTTP/1.1
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=200, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] No authentication data provided.
D [06/May/2024:20:31:08 +0200] [Client 49] 2.0 CUPS-Get-Default 1
D [06/May/2024:20:31:08 +0200] CUPS-Get-Default
D [06/May/2024:20:31:08 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [06/May/2024:20:31:08 +0200] [Client 49] Content-Length: 9775
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:31:08 +0200] [Client 49] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9775, response=0x5eee4cfc7570(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:31:08 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:31:08 +0200] [Client 49] bytes=0, http_state=0, data_remaining=9775
D [06/May/2024:20:31:08 +0200] [Client 49] Flushing write buffer.
D [06/May/2024:20:31:08 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] POST / HTTP/1.1
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=200, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] No authentication data provided.
D [06/May/2024:20:31:08 +0200] [Client 49] 2.0 CUPS-Get-Printers 2
D [06/May/2024:20:31:08 +0200] CUPS-Get-Printers
D [06/May/2024:20:31:08 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [06/May/2024:20:31:08 +0200] [Client 49] Content-Length: 2517
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:31:08 +0200] [Client 49] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2517, response=0x5eee4cf3c390(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:31:08 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:31:08 +0200] [Client 49] bytes=0, http_state=0, data_remaining=2517
D [06/May/2024:20:31:08 +0200] [Client 49] Flushing write buffer.
D [06/May/2024:20:31:08 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 50] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:31:08 +0200] [Client 50] Accepted from localhost (Domain)
D [06/May/2024:20:31:08 +0200] [Client 50] Waiting for request.
D [06/May/2024:20:31:08 +0200] [Client 50] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:31:08 +0200] [Client 50] Closing connection.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] POST / HTTP/1.1
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=200, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] No authentication data provided.
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=100, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] 2.0 CUPS-Get-Classes 3
D [06/May/2024:20:31:08 +0200] CUPS-Get-Classes
D [06/May/2024:20:31:08 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [06/May/2024:20:31:08 +0200] [Client 49] Content-Length: 75
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:31:08 +0200] [Client 49] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5eee4cfa0c00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:31:08 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:31:08 +0200] [Client 49] bytes=0, http_state=0, data_remaining=75
D [06/May/2024:20:31:08 +0200] [Client 49] Flushing write buffer.
D [06/May/2024:20:31:08 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] POST / HTTP/1.1
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=200, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] No authentication data provided.
D [06/May/2024:20:31:08 +0200] [Client 49] 2.0 CUPS-Get-Printers 4
D [06/May/2024:20:31:08 +0200] CUPS-Get-Printers
D [06/May/2024:20:31:08 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [06/May/2024:20:31:08 +0200] [Client 49] Content-Length: 379
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:31:08 +0200] [Client 49] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=379, response=0x5eee4cfc7570(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:31:08 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:31:08 +0200] [Client 49] bytes=0, http_state=0, data_remaining=379
D [06/May/2024:20:31:08 +0200] [Client 49] Flushing write buffer.
D [06/May/2024:20:31:08 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] POST / HTTP/1.1
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=200, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] No authentication data provided.
D [06/May/2024:20:31:08 +0200] [Client 49] 2.0 CUPS-Get-Printers 5
D [06/May/2024:20:31:08 +0200] CUPS-Get-Printers
D [06/May/2024:20:31:08 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [06/May/2024:20:31:08 +0200] [Client 49] Content-Length: 346
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:31:08 +0200] [Client 49] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=346, response=0x5eee4cfae600(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:31:08 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:31:08 +0200] [Client 49] bytes=0, http_state=0, data_remaining=346
D [06/May/2024:20:31:08 +0200] [Client 49] Flushing write buffer.
D [06/May/2024:20:31:08 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] POST / HTTP/1.1
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=200, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] No authentication data provided.
D [06/May/2024:20:31:08 +0200] [Client 49] 2.0 CUPS-Get-Printers 6
D [06/May/2024:20:31:08 +0200] CUPS-Get-Printers
D [06/May/2024:20:31:08 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [06/May/2024:20:31:08 +0200] [Client 49] Content-Length: 824
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:31:08 +0200] [Client 49] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=824, response=0x5eee4cfc7570(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:31:08 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:31:08 +0200] [Client 49] bytes=0, http_state=0, data_remaining=824
D [06/May/2024:20:31:08 +0200] [Client 49] Flushing write buffer.
D [06/May/2024:20:31:08 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] POST / HTTP/1.1
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:31:08 +0200] [Client 49] Read: status=200, state=6
D [06/May/2024:20:31:08 +0200] [Client 49] No authentication data provided.
D [06/May/2024:20:31:08 +0200] [Client 49] 2.0 Get-Jobs 7
D [06/May/2024:20:31:08 +0200] Get-Jobs ipp://localhost/
D [06/May/2024:20:31:08 +0200] [Client 49] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost.
D [06/May/2024:20:31:08 +0200] [Client 49] Content-Length: 75
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [06/May/2024:20:31:08 +0200] [Client 49] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:31:08 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5eee4cfc6de0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [06/May/2024:20:31:08 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [06/May/2024:20:31:08 +0200] [Client 49] bytes=0, http_state=0, data_remaining=75
D [06/May/2024:20:31:08 +0200] [Client 49] Flushing write buffer.
D [06/May/2024:20:31:08 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [06/May/2024:20:31:08 +0200] [Client 49] Waiting for request.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:31:08 +0200] [Client 49] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:31:08 +0200] [Client 49] Closing connection.
D [06/May/2024:20:31:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [06/May/2024:20:31:09 +0200] Expiring subscriptions...
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:32:12 +0200] [Client 51] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:32:12 +0200] [Client 51] Accepted from localhost (Domain)
D [06/May/2024:20:32:12 +0200] [Client 51] Waiting for request.
I [06/May/2024:20:32:12 +0200] Expiring subscriptions...
D [06/May/2024:20:32:12 +0200] Report: clients=1
D [06/May/2024:20:32:12 +0200] Report: jobs=1
D [06/May/2024:20:32:12 +0200] Report: jobs-active=0
D [06/May/2024:20:32:12 +0200] Report: printers=2
D [06/May/2024:20:32:12 +0200] Report: stringpool-string-count=2285
D [06/May/2024:20:32:12 +0200] Report: stringpool-alloc-bytes=10600
D [06/May/2024:20:32:12 +0200] Report: stringpool-total-bytes=46856
D [06/May/2024:20:32:12 +0200] [Client 51] POST / HTTP/1.1
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [06/May/2024:20:32:12 +0200] [Client 51] Read: status=200, state=6
D [06/May/2024:20:32:12 +0200] [Client 51] No authentication data provided.
D [06/May/2024:20:32:12 +0200] [Client 51] 2.0 CUPS-Get-Devices 1
D [06/May/2024:20:32:12 +0200] CUPS-Get-Devices
D [06/May/2024:20:32:12 +0200] cupsdIsAuthorized: username=""
D [06/May/2024:20:32:12 +0200] [Client 51] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [06/May/2024:20:32:12 +0200] [Client 51] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [06/May/2024:20:32:12 +0200] [Client 51] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [06/May/2024:20:32:12 +0200] [Client 51] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:32:12 +0200] [Client 51] Closing connection.
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:32:12 +0200] [Client 52] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:32:12 +0200] [Client 52] Accepted from localhost (Domain)
D [06/May/2024:20:32:12 +0200] [Client 52] Waiting for request.
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [06/May/2024:20:32:12 +0200] [Client 53] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:32:12 +0200] [Client 53] Accepted from localhost (Domain)
D [06/May/2024:20:32:12 +0200] [Client 53] Waiting for request.
D [06/May/2024:20:32:12 +0200] [Client 52] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:32:12 +0200] [Client 52] Closing connection.
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:32:12 +0200] [Client 54] Server address is "/run/cups/cups.sock".
D [06/May/2024:20:32:12 +0200] [Client 54] Accepted from localhost (Domain)
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for request.
D [06/May/2024:20:32:12 +0200] [Client 53] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:32:12 +0200] [Client 53] Closing connection.
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:32:12 +0200] [Client 54] POST / HTTP/1.1
D [06/May/2024:20:32:12 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [06/May/2024:20:32:12 +0200] [Client 54] Read: status=200, state=6
D [06/May/2024:20:32:12 +0200] [Client 54] Authorized as aucito using PeerCred.
D [06/May/2024:20:32:12 +0200] [Client 54] 2.0 CUPS-Get-Devices 1
D [06/May/2024:20:32:12 +0200] CUPS-Get-Devices
D [06/May/2024:20:32:12 +0200] cupsdIsAuthorized: username="aucito"
D [06/May/2024:20:32:12 +0200] [Client 54] AppArmor profile is 'unconfined'.
D [06/May/2024:20:32:12 +0200] [Client 54] Not a snap - allowed.
D [06/May/2024:20:32:12 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [06/May/2024:20:32:12 +0200] [CGI] argv[1] = "1"
D [06/May/2024:20:32:12 +0200] [CGI] argv[2] = "0"
D [06/May/2024:20:32:12 +0200] [CGI] argv[3] = "15"
D [06/May/2024:20:32:12 +0200] [CGI] argv[4] = "7"
D [06/May/2024:20:32:12 +0200] [CGI] argv[5] = "requested-attributes=all"
D [06/May/2024:20:32:12 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [06/May/2024:20:32:12 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [06/May/2024:20:32:12 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [06/May/2024:20:32:12 +0200] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
D [06/May/2024:20:32:12 +0200] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
D [06/May/2024:20:32:12 +0200] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
D [06/May/2024:20:32:12 +0200] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
D [06/May/2024:20:32:12 +0200] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
D [06/May/2024:20:32:12 +0200] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [06/May/2024:20:32:12 +0200] [CGI] envp[9] = "SERVER_ADMIN=root@aucito-ThinkPad-W500"
D [06/May/2024:20:32:12 +0200] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.1"
D [06/May/2024:20:32:12 +0200] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
D [06/May/2024:20:32:12 +0200] [CGI] envp[12] = "USER=root"
D [06/May/2024:20:32:12 +0200] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
D [06/May/2024:20:32:12 +0200] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
D [06/May/2024:20:32:12 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [06/May/2024:20:32:12 +0200] [CGI] envp[16] = "AUTH_TYPE=PeerCred"
D [06/May/2024:20:32:12 +0200] [CGI] envp[17] = "LANG=fr_BE.UTF8"
D [06/May/2024:20:32:12 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
D [06/May/2024:20:32:12 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
D [06/May/2024:20:32:12 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
D [06/May/2024:20:32:12 +0200] [CGI] envp[21] = "SERVER_PORT=0"
D [06/May/2024:20:32:12 +0200] [CGI] envp[22] = "REMOTE_ADDR=localhost"
D [06/May/2024:20:32:12 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
D [06/May/2024:20:32:12 +0200] [CGI] envp[24] = "SCRIPT_NAME=/"
D [06/May/2024:20:32:12 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [06/May/2024:20:32:12 +0200] [CGI] envp[26] = "REMOTE_USER=aucito"
D [06/May/2024:20:32:12 +0200] [CGI] envp[27] = "SERVER_PROTOCOL=HTTP/1.1"
D [06/May/2024:20:32:12 +0200] [CGI] envp[28] = "HTTP_USER_AGENT=CUPS/2.4.1 (Linux 6.5.0-28-generic; x86_64) IPP/2.0"
D [06/May/2024:20:32:12 +0200] [CGI] envp[29] = "REQUEST_METHOD=POST"
D [06/May/2024:20:32:12 +0200] [CGI] envp[30] = "CONTENT_LENGTH=75"
D [06/May/2024:20:32:12 +0200] [CGI] envp[31] = "CONTENT_TYPE=application/ipp"
D [06/May/2024:20:32:12 +0200] cupsdAddCert: Adding certificate for PID 2533
D [06/May/2024:20:32:12 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 2533)
I [06/May/2024:20:32:12 +0200] [Client 54] Started "/usr/lib/cups/daemon/cups-deviced" (pid=2533, file=11)
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 2534)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 2535)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 2536)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 2537)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 2538)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 2539)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless-fax (PID 2540)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 2541)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 2542)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 2543)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 2544)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 2545)
D [06/May/2024:20:32:12 +0200] [CGI] Started ippfind (PID 2546)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 2548)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 2549)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 2550)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 2551)
D [06/May/2024:20:32:12 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 2552)
D [06/May/2024:20:32:12 +0200] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [06/May/2024:20:32:12 +0200] [CGI] Loaded 118 quirks.
D [06/May/2024:20:32:12 +0200] [CGI] list_devices
D [06/May/2024:20:32:12 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"serial:/dev/ttyS4?baud=115200\"...
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"cups-brf:/\"...
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"https\"...
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"beh\"...
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2538 (serial) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2541 (implicitclass) exited with no errors.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] Script header: Content-Type: application/ipp
D [06/May/2024:20:32:12 +0200] [Client 54] Script header: 
D [06/May/2024:20:32:12 +0200] [Client 54] Sending status 200 for CGI.
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2542 (mdns) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2545 (cups-brf) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2548 (https) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2550 (beh) exited with no errors.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"ipps\"...
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"lpd\"...
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2552 (lpd) exited with no errors.
D [06/May/2024:20:32:12 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"ipp\"...
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"http\"...
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2539 (ipps) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2537 (ipp) exited with no errors.
D [06/May/2024:20:32:12 +0200] [CGI] libusb_get_device_list=10
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2540 (driverless-fax) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2551 (parallel) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2543 (http) exited with no errors.
D [06/May/2024:20:32:12 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"socket\"...
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:12 +0200] [CGI] Flushed attributes...
D [06/May/2024:20:32:12 +0200] [cups-deviced] Found device \"usb://EPSON/AL-C1100?serial=31PF9FZ11983850914\"...
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:12 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:12 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2549 (socket) exited with no errors.
D [06/May/2024:20:32:12 +0200] [cups-deviced] PID 2535 (usb) exited with no errors.
D [06/May/2024:20:32:13 +0200] [CGI] sent=0, count=0
I [06/May/2024:20:32:13 +0200] Expiring subscriptions...
D [06/May/2024:20:32:13 +0200] [CGI] ippfind (PID 2546) exited with no errors.
D [06/May/2024:20:32:13 +0200] [cups-deviced] PID 2534 (driverless) exited with no errors.
D [06/May/2024:20:32:14 +0200] [CGI] sent=0, count=0
I [06/May/2024:20:32:14 +0200] Expiring subscriptions...
D [06/May/2024:20:32:14 +0200] [cups-deviced] PID 2536 (dnssd) exited with no errors.
D [06/May/2024:20:32:14 +0200] [cups-deviced] PID 2544 (snmp) exited with no errors.
D [06/May/2024:20:32:14 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:14 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:14 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:14 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:14 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:14 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:14 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:14 +0200] [Client 54] CGI data ready to be sent.
D [06/May/2024:20:32:14 +0200] PID 2533 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [06/May/2024:20:32:14 +0200] [Client 54] con->http=0x5eee4cfbc5e0
D [06/May/2024:20:32:14 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2533, file=11
D [06/May/2024:20:32:14 +0200] [Client 54] Waiting for CGI data.
D [06/May/2024:20:32:14 +0200] [Client 54] Sending 0-length chunk.
D [06/May/2024:20:32:14 +0200] [Client 54] Flushing write buffer.
D [06/May/2024:20:32:14 +0200] [Client 54] New state is HTTP_STATE_WAITING
D [06/May/2024:20:32:14 +0200] [Client 54] Waiting for request.
D [06/May/2024:20:32:14 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [06/May/2024:20:32:14 +0200] [Client 54] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [06/May/2024:20:32:14 +0200] [Client 54] Closing connection.
D [06/May/2024:20:32:14 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [06/May/2024:20:32:15 +0200] Expiring subscriptions...
aucito@aucito-ThinkPad-W500:~$

aucito · Le 06/05/2024, à 20:51

Désolé pour le dernier, on dirait que la mémoire de mon terminal est insuffisante ?
Bonne soirée.

xubu1957 · Le 07/05/2024, à 08:18

Bonjour,

Vu :

EPSON-AL-C1100 accepte des requêtes depuis lun 06 mai 2024 19:58:54

Tente :

sudo service cups restart

aucito · Le 07/05/2024, à 08:44

Bonjour.
J'ai recommencé après avoir allumé l'imprimante, on ne sait jamais..

aucito@aucito-ThinkPad-W500:~$ sudo service cups restart
[sudo] Mot de passe de aucito : 
aucito@aucito-ThinkPad-W500:~$ sudo service cups restart
aucito@aucito-ThinkPad-W500:~$

xubu1957 · Le 07/05/2024, à 08:50

Tu as éteint et rallumé l'imprimante ?

aucito · Le 07/05/2024, à 08:56

Note; j'ai supprimé l'imprimante et l'ai réajoutée ensuite, essayé impression d'une page de test.. Et échec.
D'autre part quand je met mon portable en marche, après avoir mis mon mot de passe, affiche
"Problème logiciel détecté, voulez -vous signaler ce problème? "
Déjà souvent je réponds OUI mais ća ne change rien.. A chaque démarrage ća ré-apparaît et ce depuis quelques jours quand j'ai décidé de passer d'une installation minimale d'Xubuntu à une installation normale (recommends), pour voir si mon problème d'imprimante ne se solutionnerait pas aimsi..

xubu1957 · Le 07/05/2024, à 08:57

Montre :

ls -l /var/crash

aucito · Le 07/05/2024, à 09:14

Voici

aucito@aucito-ThinkPad-W500:~$ ls -l /var/crash
total 42528
-rw-r----- 1 aucito         whoopsie  4060064 mai  2 17:31 _usr_bin_eid-viewer.1000.crash
-rw-rw-r-- 1 aucito         whoopsie        0 mai  5 10:45 _usr_bin_eid-viewer.1000.upload
-rw------- 1 whoopsie       whoopsie       37 mai  5 11:02 _usr_bin_eid-viewer.1000.uploaded
-rw-r----- 1 aucito         whoopsie 38865421 mai  5 10:44 _usr_lib_notepadqq_notepadqq-bin.1000.crash
-rw-rw-r-- 1 aucito         whoopsie        0 mai  5 10:44 _usr_lib_notepadqq_notepadqq-bin.1000.upload
-rw------- 1 whoopsie       whoopsie       37 mai  5 10:52 _usr_lib_notepadqq_notepadqq-bin.1000.uploaded
-rw-r----- 1 cups-pk-helper whoopsie   608999 mai  5 11:09 _usr_lib_x86_64-linux-gnu_cups-pk-helper-mechanism.117.crash
aucito@aucito-ThinkPad-W500:~$

aucito · Le 07/05/2024, à 09:23

Question: Un shell script comme pstoalc1100.sh ća s'ouvre normalement avec quoi? Avec libre office writer, ou avec notepadqq ou encore avec terminal ?
Quand je l'ai rendu ecécutable comme programme, vu que ća ne marchait pas, j'ai modifié le programme d'ouverture et à mon avis d'origine c'était libre office writer mais je vens de vérifier et il est mentionné terminal.. mais je ne pense pas que ce soit là le problème..?? Car avant de changer j'avais essayé et échec.

xubu1957 · Le 07/05/2024, à 09:34

Je ne sais pas aider pour les scripts.

Je ne peux pas aider plus ! ¯∖_(ツ)_/¯

aucito · Le 07/05/2024, à 09:42

Merci.

aucito · Le 07/05/2024, à 14:18

Bonjour. Je reviens vers vous car je viens de pouvoir installer cette imprimante..
J'ai suivi le post exposé https://forum.ubuntu-fr.org/viewtopic.php?id=602841
L'image n'est pas top, trop grise, mais bon.
Apparemment cette page indique une façon d'installer autrement pour obtenir une image plus fidèle, mais pour une prochaine fois peut-être..

Je vais mettre résolu une prochaine fois, car en attendant il y aura peut-être des réactions ..

Merci.

xubu1957 · Le 07/05/2024, à 14:21

C'était avec des versions 10.04 et 11.04 !

Fournis les retours de :

sudo apt update

aucito · Le 07/05/2024, à 18:32

Voici :

aucito@aucito-ThinkPad-W500:~$ sudo apt update
[sudo] Mot de passe de aucito : 
Réception de :1 https://dl.google.com/linux/chrome/deb stable InRelease [1.825 B]
Réception de :2 https://files.eid.belgium.be/debian jammy InRelease [4.663 B]  
Réception de :3 https://updates.signal.org/desktop/apt xenial InRelease [5.887 B]
Réception de :4 https://ppa.launchpadcontent.net/mozillateam/ppa/ubuntu jammy InRelease [24,6 kB]
Réception de :5 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Atteint :6 http://be.archive.ubuntu.com/ubuntu jammy InRelease        
Réception de :7 http://be.archive.ubuntu.com/ubuntu jammy-updates InRelease [119 kB]
Réception de :8 https://files.eid.belgium.be/debian jammy/main i386 Packages [3.400 B]
Réception de :9 https://files.eid.belgium.be/debian jammy/main amd64 Packages [3.408 B]
Err :3 https://updates.signal.org/desktop/apt xenial InRelease                 
  Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY D980A17457F6FB06
Réception de :10 https://ppa.launchpadcontent.net/mozillateam/ppa/ubuntu jammy/main amd64 Packages [34,2 kB]
Réception de :11 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [1.400 kB]
Réception de :12 http://be.archive.ubuntu.com/ubuntu jammy-backports InRelease [109 kB]
Réception de :13 http://be.archive.ubuntu.com/ubuntu jammy-updates/main i386 Packages [624 kB]
Réception de :14 http://be.archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [1.638 kB]
Réception de :15 http://security.ubuntu.com/ubuntu jammy-security/main i386 Packages [454 kB]
Réception de :16 http://be.archive.ubuntu.com/ubuntu jammy-updates/main Translation-en [307 kB]
Réception de :17 http://security.ubuntu.com/ubuntu jammy-security/main Translation-en [244 kB]
Réception de :18 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [1.779 kB]
Réception de :19 http://be.archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [1.864 kB]
Réception de :20 http://security.ubuntu.com/ubuntu jammy-security/restricted Translation-en [302 kB]
Réception de :21 http://be.archive.ubuntu.com/ubuntu jammy-updates/restricted Translation-en [316 kB]
Réception de :22 http://be.archive.ubuntu.com/ubuntu jammy-updates/universe i386 Packages [701 kB]
Réception de :23 http://be.archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1.072 kB]
Réception de :24 http://be.archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [28,4 kB]
Réception de :25 http://be.archive.ubuntu.com/ubuntu jammy-backports/universe i386 Packages [17,2 kB]
Lecture des listes de paquets... Fait                                          
W: Erreur de GPG : https://updates.signal.org/desktop/apt xenial InRelease : Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY D980A17457F6FB06
E: Le dépôt https://updates.signal.org/desktop/apt xenial InRelease n'est pas signé.
N: Les mises à jour depuis un tel dépôt ne peuvent s'effectuer de manière sécurisée, et sont donc désactivées par défaut.
N: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.
aucito@aucito-ThinkPad-W500:~$

aucito · Le 07/05/2024, à 18:47

Bonsoir xubu.. Un moment j'avais craint qu'une mise à jour rendait l'installation caduque, mais non, je viens de ré-essayer l'impression de la page de test, et ok.
Sinon, l'encadré apparaissant au démarrage de système signalant " problème de logiciel détecté " continue d’apparaître..? .Ca m'ennuie mais ce n'est pas grave...
Peut-être lié à l'installation de EID qui a échoué sur firefox...

xubu1957 · Le 07/05/2024, à 18:57

Pour info :

1) la technique de nany (en adaptant le _usr_sbin_xxxxxx)

ou

2) la méthode de michel_04 avec ce complément.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 06/05/2024, à 16:51

{RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#2 Le 06/05/2024, à 17:06

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#3 Le 06/05/2024, à 18:35

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#4 Le 06/05/2024, à 19:51

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#5 Le 06/05/2024, à 20:05

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#6 Le 06/05/2024, à 20:09

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#7 Le 06/05/2024, à 20:45

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#8 Le 06/05/2024, à 20:46

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#9 Le 06/05/2024, à 20:47

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#10 Le 06/05/2024, à 20:50

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#11 Le 06/05/2024, à 20:51

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#12 Le 07/05/2024, à 08:18

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#13 Le 07/05/2024, à 08:44

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#14 Le 07/05/2024, à 08:50

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#15 Le 07/05/2024, à 08:56

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#16 Le 07/05/2024, à 08:57

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#17 Le 07/05/2024, à 09:14

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#18 Le 07/05/2024, à 09:23

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#19 Le 07/05/2024, à 09:34

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#20 Le 07/05/2024, à 09:42

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#21 Le 07/05/2024, à 14:18

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#22 Le 07/05/2024, à 14:21

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#23 Le 07/05/2024, à 18:32

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#24 Le 07/05/2024, à 18:47

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

#25 Le 07/05/2024, à 18:57

Re : {RESOLU} Installation Epson AL-C1100 sur Xubuntu 22.04..

Pied de page des forums