#1 Le 16/12/2023, à 19:54
- LukePerp
[Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Bonjour,
Après l'ajout d'un SSD type M2, le démarrage entre la validation d'une entrée du menu Grub et le login d'Ubuntu dure 1 minute et 25 secondes, au lieu de 10s environ avant l'ajout du M2.
20/12/2023 Abandon : avec clonezilla, j'ai migré Ubuntu du disque SSD sda vers le disque NVME, mettant fin à ce problème de pause.
Ubuntu n'est pas installé sur le M2. Dans le bios, le boot est bien positionné sur le SSD avec Ubuntu. Mais le problème de lenteur apparaît après la disparition du Grub menu.
Les logs ne montrent pas cette durée, mesurée au chronomètre.
Mon pc démarre sans crash, ni erreurs, juste qu'il met 8.5 fois plus de temps à démarrer.
Je n'ai pas lié à une table de parition MBR ou GPT, puisque j'ai testé les deux sur le nvme.
Comme expliqué, Ubuntu est installé sur un autre disque mais c'est le NVME qui ralentit le démarrage. Pour comparer, j'a installé un second Ubuntu sur une partition du disque NVME. Son démarrage est très rapide et je ne met pas les logs de cette situation pour éviter d'embrouiller.
Je n'ai plus d'idée sur l'origine du soucis.
Logs et rapports pour le problème :
------dmesg-------
[ 0.000000] microcode: microcode updated early to revision 0xf8, date = 2023-02-23
[ 0.000000] Linux version 5.19.0-32-generic (buildd@lcy02-amd64-026) (x86_64-linux-gnu-gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #33~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Mon Jan 30 17:03:34 UTC 2 (Ubuntu 5.19.0-32.33~22.04.1-generic 5.19.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-32-generic root=UUID=ee2f4425-cb03-4ffe-a80f-3cfb5ef81775 ro loglevel=3 quiet splash loglevel=3 amdgpu.ppfeaturemask=0xffffffff vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: xstate_offset[9]: 960, xstate_sizes[9]: 8
[ 0.000000] x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 3632
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d006fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d007000-0x000000009d806fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d807000-0x000000009d936fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009d937000-0x000000009dd94fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009dd95000-0x000000009ec4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ec4f000-0x000000009ec4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ec50000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7C89/H410M-A PRO (MS-7C89), BIOS 1.80 11/16/2020
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000746] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000750] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000759] last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000963] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001709] last_pfn = 0x9ec50 max_arch_pfn = 0x400000000
[ 0.009649] found SMP MP-table at [mem 0x000fcdb0-0x000fcdbf]
[ 0.009663] Using GB pages for direct mapping
[ 0.010199] RAMDISK: [mem 0x296b1000-0x30b4ffff]
[ 0.010206] ACPI: Early table checksum verification disabled
[ 0.010209] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.010213] ACPI: XSDT 0x000000009DD2B728 0000B4 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.010218] ACPI: FACP 0x000000009D930000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.010224] ACPI: DSDT 0x000000009D8F9000 036DEB (v02 ALASKA A M I 01072009 INTL 20160527)
[ 0.010228] ACPI: FACS 0x000000009DD94000 000040
[ 0.010231] ACPI: MCFG 0x000000009D934000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.010234] ACPI: SSDT 0x000000009D931000 0020AD (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.010237] ACPI: FIDT 0x000000009D8F8000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.010240] ACPI: SSDT 0x000000009D8F4000 0031DA (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.010244] ACPI: SSDT 0x000000009D8F1000 00276E (v02 Intel PegSsdt 00001000 INTL 20160527)
[ 0.010247] ACPI: HPET 0x000000009D936000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.010250] ACPI: SSDT 0x000000009D8EF000 00147B (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[ 0.010253] ACPI: SSDT 0x000000009D8EB000 00323A (v02 INTEL xh_cmvd4 00000000 INTL 20160527)
[ 0.010256] ACPI: NHLT 0x000000009D935000 00002D (v00 ALASKA A M I 01072009 AMI 01000013)
[ 0.010260] ACPI: LPIT 0x000000009D8EA000 000094 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.010263] ACPI: SSDT 0x000000009D8E6000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[ 0.010266] ACPI: SSDT 0x000000009D8E3000 0025B2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[ 0.010269] ACPI: DBGP 0x000000009D8E2000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.010272] ACPI: DBG2 0x000000009D8E1000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
[ 0.010275] ACPI: APIC 0x000000009D8E0000 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.010278] ACPI: FPDT 0x000000009D8DF000 000044 (v01 ALASKA CML 01072009 AMI 01000013)
[ 0.010282] ACPI: WSMT 0x000000009D8E9000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.010284] ACPI: Reserving FACP table memory at [mem 0x9d930000-0x9d930113]
[ 0.010286] ACPI: Reserving DSDT table memory at [mem 0x9d8f9000-0x9d92fdea]
[ 0.010287] ACPI: Reserving FACS table memory at [mem 0x9dd94000-0x9dd9403f]
[ 0.010288] ACPI: Reserving MCFG table memory at [mem 0x9d934000-0x9d93403b]
[ 0.010289] ACPI: Reserving SSDT table memory at [mem 0x9d931000-0x9d9330ac]
[ 0.010289] ACPI: Reserving FIDT table memory at [mem 0x9d8f8000-0x9d8f809b]
[ 0.010290] ACPI: Reserving SSDT table memory at [mem 0x9d8f4000-0x9d8f71d9]
[ 0.010291] ACPI: Reserving SSDT table memory at [mem 0x9d8f1000-0x9d8f376d]
[ 0.010292] ACPI: Reserving HPET table memory at [mem 0x9d936000-0x9d936037]
[ 0.010293] ACPI: Reserving SSDT table memory at [mem 0x9d8ef000-0x9d8f047a]
[ 0.010294] ACPI: Reserving SSDT table memory at [mem 0x9d8eb000-0x9d8ee239]
[ 0.010295] ACPI: Reserving NHLT table memory at [mem 0x9d935000-0x9d93502c]
[ 0.010296] ACPI: Reserving LPIT table memory at [mem 0x9d8ea000-0x9d8ea093]
[ 0.010297] ACPI: Reserving SSDT table memory at [mem 0x9d8e6000-0x9d8e871f]
[ 0.010297] ACPI: Reserving SSDT table memory at [mem 0x9d8e3000-0x9d8e55b1]
[ 0.010298] ACPI: Reserving DBGP table memory at [mem 0x9d8e2000-0x9d8e2033]
[ 0.010299] ACPI: Reserving DBG2 table memory at [mem 0x9d8e1000-0x9d8e1053]
[ 0.010300] ACPI: Reserving APIC table memory at [mem 0x9d8e0000-0x9d8e00f3]
[ 0.010301] ACPI: Reserving FPDT table memory at [mem 0x9d8df000-0x9d8df043]
[ 0.010302] ACPI: Reserving WSMT table memory at [mem 0x9d8e9000-0x9d8e9027]
[ 0.010782] No NUMA configuration found
[ 0.010783] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.010792] NODE_DATA(0) allocated [mem 0x45efd5000-0x45effffff]
[ 0.011181] Zone ranges:
[ 0.011181] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011184] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011185] Normal [mem 0x0000000100000000-0x000000045effffff]
[ 0.011187] Device empty
[ 0.011188] Movable zone start for each node
[ 0.011191] Early memory node ranges
[ 0.011191] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.011193] node 0: [mem 0x0000000000100000-0x000000009d006fff]
[ 0.011194] node 0: [mem 0x000000009ec4f000-0x000000009ec4ffff]
[ 0.011195] node 0: [mem 0x0000000100000000-0x000000045effffff]
[ 0.011198] Initmem setup node 0 [mem 0x0000000000001000-0x000000045effffff]
[ 0.011202] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.011233] On node 0, zone DMA: 100 pages in unavailable ranges
[ 0.015994] On node 0, zone DMA32: 7240 pages in unavailable ranges
[ 0.041933] On node 0, zone Normal: 5040 pages in unavailable ranges
[ 0.041994] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.042180] ACPI: PM-Timer IO Port: 0x1808
[ 0.042187] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.042189] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.042190] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.042191] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.042192] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.042192] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.042193] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.042194] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.042195] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.042195] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.042196] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.042197] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.042223] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.042226] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.042228] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.042232] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.042233] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.042236] TSC deadline timer available
[ 0.042237] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.042254] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.042256] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.042257] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.042258] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.042259] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.042260] PM: hibernation: Registered nosave memory: [mem 0x9d007000-0x9d806fff]
[ 0.042261] PM: hibernation: Registered nosave memory: [mem 0x9d807000-0x9d936fff]
[ 0.042262] PM: hibernation: Registered nosave memory: [mem 0x9d937000-0x9dd94fff]
[ 0.042263] PM: hibernation: Registered nosave memory: [mem 0x9dd95000-0x9ec4efff]
[ 0.042264] PM: hibernation: Registered nosave memory: [mem 0x9ec50000-0x9fffffff]
[ 0.042265] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[ 0.042266] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.042267] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.042267] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.042268] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.042269] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.042270] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.042270] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.042271] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ 0.042272] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.042272] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.042273] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.042275] [mem 0xa0000000-0xdfffffff] available for PCI devices
[ 0.042276] Booting paravirtualized kernel on bare hardware
[ 0.042278] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.042285] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.042571] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.042579] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.042581] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.042614] Fallback order for Node 0: 0
[ 0.042617] Built 1 zonelists, mobility grouping on. Total pages: 4112391
[ 0.042618] Policy zone: Normal
[ 0.042619] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-32-generic root=UUID=ee2f4425-cb03-4ffe-a80f-3cfb5ef81775 ro loglevel=3 quiet splash loglevel=3 amdgpu.ppfeaturemask=0xffffffff vt.handoff=7
[ 0.042750] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.19.0-32-generic", will be passed to user space.
[ 0.043468] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.043851] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.043976] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.084727] Memory: 16189696K/16711308K available (18440K kernel code, 4050K rwdata, 11288K rodata, 3168K init, 4908K bss, 521352K reserved, 0K cma-reserved)
[ 0.085479] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.085508] ftrace: allocating 52169 entries in 204 pages
[ 0.094477] ftrace: allocated 204 pages with 4 groups
[ 0.095261] Dynamic Preempt: voluntary
[ 0.095331] rcu: Preemptible hierarchical RCU implementation.
[ 0.095332] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
[ 0.095334] Trampoline variant of Tasks RCU enabled.
[ 0.095334] Rude variant of Tasks RCU enabled.
[ 0.095335] Tracing variant of Tasks RCU enabled.
[ 0.095335] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.095336] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.100527] NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
[ 0.100732] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.100855] random: crng init done
[ 0.100884] Console: colour dummy device 80x25
[ 0.100904] printk: console [tty0] enabled
[ 0.100924] ACPI: Core revision 20220331
[ 0.101284] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.101351] APIC: Switch to symmetric I/O mode setup
[ 0.102554] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.102827] Switched APIC routing to physical flat.
[ 0.106907] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.125359] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.125363] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.125366] pid_max: default: 32768 minimum: 301
[ 0.125394] LSM: Security Framework initializing
[ 0.125405] landlock: Up and running.
[ 0.125406] Yama: becoming mindful.
[ 0.125428] AppArmor: AppArmor initialized
[ 0.125474] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.125497] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.125708] x86/cpu: SGX disabled by BIOS.
[ 0.125714] CPU0: Thermal monitoring enabled (TM1)
[ 0.125766] process: using mwait in idle threads
[ 0.125768] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.125769] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.125773] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.125775] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.125776] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.125776] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ 0.125777] RETBleed: Mitigation: Enhanced IBRS
[ 0.125779] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.125780] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.125784] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.125786] SRBDS: Mitigation: Microcode
[ 0.146614] Freeing SMP alternatives memory: 44K
[ 0.149425] smpboot: CPU0: Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz (family: 0x6, model: 0xa5, stepping: 0x5)
[ 0.149523] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.149525] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.149537] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.149549] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.149561] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.149582] ... version: 4
[ 0.149583] ... bit width: 48
[ 0.149583] ... generic registers: 4
[ 0.149584] ... value mask: 0000ffffffffffff
[ 0.149585] ... max period: 00007fffffffffff
[ 0.149586] ... fixed-purpose events: 3
[ 0.149586] ... event mask: 000000070000000f
[ 0.149669] Estimated ratio of average max frequency by base frequency (times 1024): 1447
[ 0.149685] rcu: Hierarchical SRCU implementation.
[ 0.149686] rcu: Max phase no-delay instances is 1000.
[ 0.150502] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.150594] smp: Bringing up secondary CPUs ...
[ 0.150668] x86: Booting SMP configuration:
[ 0.150669] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.162071] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.162071] #7 #8 #9 #10 #11
[ 0.165791] smp: Brought up 1 node, 12 CPUs
[ 0.165791] smpboot: Max logical packages: 1
[ 0.165791] smpboot: Total of 12 processors activated (69597.26 BogoMIPS)
[ 0.169872] devtmpfs: initialized
[ 0.169872] x86/mm: Memory block size: 128MB
[ 0.170515] ACPI: PM: Registering ACPI NVS region [mem 0x9d937000-0x9dd94fff] (4579328 bytes)
[ 0.170515] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.170515] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.170515] pinctrl core: initialized pinctrl subsystem
[ 0.170515] PM: RTC time: 17:26:08, date: 2023-12-16
[ 0.170515] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.170515] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.170515] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.170515] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.170515] audit: initializing netlink subsys (disabled)
[ 0.170515] audit: type=2000 audit(1702747567.068:1): state=initialized audit_enabled=0 res=1
[ 0.170515] thermal_sys: Registered thermal governor 'fair_share'
[ 0.170515] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.170515] thermal_sys: Registered thermal governor 'step_wise'
[ 0.170515] thermal_sys: Registered thermal governor 'user_space'
[ 0.170515] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.170515] EISA bus registered
[ 0.170515] cpuidle: using governor ladder
[ 0.170515] cpuidle: using governor menu
[ 0.170515] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.170515] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.170515] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.170515] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.170515] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.170515] PCI: Using configuration type 1 for base access
[ 0.174107] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.174115] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.174115] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.174115] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.174115] ACPI: Added _OSI(Module Device)
[ 0.174115] ACPI: Added _OSI(Processor Device)
[ 0.174115] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.174115] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.174115] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.174115] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.174115] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.251810] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.257498] ACPI: Dynamic OEM Table Load:
[ 0.257507] ACPI: SSDT 0xFFFF9EA601454700 0000FC (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
[ 0.258680] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.260510] ACPI: Dynamic OEM Table Load:
[ 0.260516] ACPI: SSDT 0xFFFF9EA6009B3C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.261810] ACPI: Dynamic OEM Table Load:
[ 0.261816] ACPI: SSDT 0xFFFF9EA6009C9000 0005E4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.263587] ACPI: Dynamic OEM Table Load:
[ 0.263594] ACPI: SSDT 0xFFFF9EA6009CA800 000778 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.265043] ACPI: Dynamic OEM Table Load:
[ 0.265049] ACPI: SSDT 0xFFFF9EA6009B5000 0003D7 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.266473] ACPI: Dynamic OEM Table Load:
[ 0.266479] ACPI: SSDT 0xFFFF9EA6009BB000 000D22 (v02 PmRef ApPsd 00003000 INTL 20160527)
[ 0.268713] ACPI: Dynamic OEM Table Load:
[ 0.268718] ACPI: SSDT 0xFFFF9EA6009B2C00 0003CA (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.276694] ACPI: Interpreter enabled
[ 0.276735] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.276737] ACPI: Using IOAPIC for interrupt routing
[ 0.276775] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.276776] PCI: Using E820 reservations for host bridge windows
[ 0.278172] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.295145] ACPI: PM: Power Resource [V0PR]
[ 0.295397] ACPI: PM: Power Resource [V1PR]
[ 0.295643] ACPI: PM: Power Resource [V2PR]
[ 0.302023] ACPI: PM: Power Resource [FN00]
[ 0.302108] ACPI: PM: Power Resource [FN01]
[ 0.302191] ACPI: PM: Power Resource [FN02]
[ 0.302276] ACPI: PM: Power Resource [FN03]
[ 0.302357] ACPI: PM: Power Resource [FN04]
[ 0.302911] ACPI: PM: Power Resource [PIN]
[ 0.303520] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.303527] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.303660] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[ 0.303901] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR DPC]
[ 0.303903] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.304874] PCI host bridge to bus 0000:00
[ 0.304876] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.304878] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.304879] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.304881] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[ 0.304882] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.304883] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.304975] pci 0000:00:00.0: [8086:9b53] type 00 class 0x060000
[ 0.305039] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.305078] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.305737] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.305746] pci 0000:00:08.0: reg 0x10: [mem 0xa044f000-0xa044ffff 64bit]
[ 0.305846] pci 0000:00:14.0: [8086:a3af] type 00 class 0x0c0330
[ 0.305861] pci 0000:00:14.0: reg 0x10: [mem 0xa0430000-0xa043ffff 64bit]
[ 0.305919] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.306742] pci 0000:00:14.2: [8086:a3b1] type 00 class 0x118000
[ 0.306758] pci 0000:00:14.2: reg 0x10: [mem 0xa044e000-0xa044efff 64bit]
[ 0.306876] pci 0000:00:16.0: [8086:a3ba] type 00 class 0x078000
[ 0.306897] pci 0000:00:16.0: reg 0x10: [mem 0xa044d000-0xa044dfff 64bit]
[ 0.306976] pci 0000:00:16.0: PME# supported from D3hot
[ 0.307512] pci 0000:00:17.0: [8086:a382] type 00 class 0x010601
[ 0.307523] pci 0000:00:17.0: reg 0x10: [mem 0xa0448000-0xa0449fff]
[ 0.307530] pci 0000:00:17.0: reg 0x14: [mem 0xa044c000-0xa044c0ff]
[ 0.307536] pci 0000:00:17.0: reg 0x18: [io 0x4050-0x4057]
[ 0.307543] pci 0000:00:17.0: reg 0x1c: [io 0x4040-0x4043]
[ 0.307549] pci 0000:00:17.0: reg 0x20: [io 0x4020-0x403f]
[ 0.307555] pci 0000:00:17.0: reg 0x24: [mem 0xa044b000-0xa044b7ff]
[ 0.307592] pci 0000:00:17.0: PME# supported from D3hot
[ 0.307668] pci 0000:00:1c.0: [8086:a394] type 01 class 0x060400
[ 0.307732] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.308302] pci 0000:00:1f.0: [8086:a3da] type 00 class 0x060100
[ 0.308660] pci 0000:00:1f.2: [8086:a3a1] type 00 class 0x058000
[ 0.308673] pci 0000:00:1f.2: reg 0x10: [mem 0xa0444000-0xa0447fff]
[ 0.308977] pci 0000:00:1f.3: [8086:a3f0] type 00 class 0x040300
[ 0.308998] pci 0000:00:1f.3: reg 0x10: [mem 0xa0440000-0xa0443fff 64bit]
[ 0.309028] pci 0000:00:1f.3: reg 0x20: [mem 0xa0420000-0xa042ffff 64bit]
[ 0.309074] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.310286] pci 0000:00:1f.4: [8086:a3a3] type 00 class 0x0c0500
[ 0.310343] pci 0000:00:1f.4: reg 0x10: [mem 0xa044a000-0xa044a0ff 64bit]
[ 0.310413] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.310750] pci 0000:00:1f.6: [8086:0d55] type 00 class 0x020000
[ 0.310769] pci 0000:00:1f.6: reg 0x10: [mem 0xa0400000-0xa041ffff]
[ 0.310874] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.311172] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400
[ 0.311183] pci 0000:01:00.0: reg 0x10: [mem 0xa0200000-0xa0203fff]
[ 0.311259] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.311298] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.311364] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.311367] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.311369] pci 0000:00:01.0: bridge window [mem 0xa0100000-0xa02fffff]
[ 0.311372] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.311409] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400
[ 0.311490] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.311566] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[ 0.311570] pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
[ 0.311573] pci 0000:01:00.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.311576] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.311609] pci 0000:03:00.0: [1002:731f] type 00 class 0x030000
[ 0.311622] pci 0000:03:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.311631] pci 0000:03:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.311637] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.311643] pci 0000:03:00.0: reg 0x24: [mem 0xa0100000-0xa017ffff]
[ 0.311648] pci 0000:03:00.0: reg 0x30: [mem 0xa0180000-0xa019ffff pref]
[ 0.311675] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.311723] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.311771] pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.311808] pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300
[ 0.311818] pci 0000:03:00.1: reg 0x10: [mem 0xa01a0000-0xa01a3fff]
[ 0.311893] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.311956] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.311960] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
[ 0.311962] pci 0000:02:00.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.311966] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.312053] pci 0000:04:00.0: [144d:a80a] type 00 class 0x010802
[ 0.312072] pci 0000:04:00.0: reg 0x10: [mem 0xa0300000-0xa0303fff 64bit]
[ 0.312256] pci 0000:04:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:1c.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[ 0.312319] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.312323] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.315778] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.315883] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[ 0.315986] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.316089] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.316191] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.316293] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.316395] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.316497] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.323322] iommu: Default domain type: Translated
[ 0.323322] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.323322] SCSI subsystem initialized
[ 0.323322] libata version 3.00 loaded.
[ 0.323322] ACPI: bus type USB registered
[ 0.323322] usbcore: registered new interface driver usbfs
[ 0.323322] usbcore: registered new interface driver hub
[ 0.323322] usbcore: registered new device driver usb
[ 0.323322] pps_core: LinuxPPS API ver. 1 registered
[ 0.323322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.323322] PTP clock support registered
[ 0.323322] EDAC MC: Ver: 3.0.0
[ 0.323322] NetLabel: Initializing
[ 0.323322] NetLabel: domain hash size = 128
[ 0.323322] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.323322] NetLabel: unlabeled traffic allowed by default
[ 0.323322] mctp: management component transport protocol core
[ 0.323322] NET: Registered PF_MCTP protocol family
[ 0.323322] PCI: Using ACPI for IRQ routing
[ 0.351455] PCI: pci_cache_line_size set to 64 bytes
[ 0.351495] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.351497] e820: reserve RAM buffer [mem 0x9d007000-0x9fffffff]
[ 0.351498] e820: reserve RAM buffer [mem 0x9ec50000-0x9fffffff]
[ 0.351499] e820: reserve RAM buffer [mem 0x45f000000-0x45fffffff]
[ 0.351510] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.351510] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.351510] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.351510] vgaarb: loaded
[ 0.351510] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.351510] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.354400] clocksource: Switched to clocksource tsc-early
[ 0.354495] VFS: Disk quotas dquot_6.6.0
[ 0.354507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.354603] AppArmor: AppArmor Filesystem Enabled
[ 0.354629] pnp: PnP ACPI init
[ 0.354932] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.354935] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.354936] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.355286] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.355289] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.355420] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.355531] system 00:03: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.355533] system 00:03: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.355534] system 00:03: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.355536] system 00:03: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.355537] system 00:03: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.355539] system 00:03: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.355881] system 00:04: [io 0x2000-0x20fe] has been reserved
[ 0.356572] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.356574] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.356575] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.356577] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.356578] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.356579] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.356581] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.356582] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.357003] system 00:06: [mem 0xfe038000-0xfe038fff] has been reserved
[ 0.357003] pnp: PnP ACPI: found 7 devices
[ 0.362238] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.362292] NET: Registered PF_INET protocol family
[ 0.362424] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.365187] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.365212] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.365278] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.365431] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.365492] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.365561] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.365612] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.365650] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.365700] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.365704] NET: Registered PF_XDP protocol family
[ 0.365714] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.365718] pci 0000:02:00.0: bridge window [io 0x3000-0x3fff]
[ 0.365722] pci 0000:02:00.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.365725] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.365729] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[ 0.365731] pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
[ 0.365734] pci 0000:01:00.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.365736] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.365741] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.365742] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.365744] pci 0000:00:01.0: bridge window [mem 0xa0100000-0xa02fffff]
[ 0.365746] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.365749] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.365752] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.365757] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.365759] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.365760] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.365762] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window]
[ 0.365763] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[ 0.365764] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.365766] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[ 0.365767] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.365768] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.365769] pci_bus 0000:02: resource 1 [mem 0xa0100000-0xa01fffff]
[ 0.365770] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.365772] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.365773] pci_bus 0000:03: resource 1 [mem 0xa0100000-0xa01fffff]
[ 0.365774] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref]
[ 0.365775] pci_bus 0000:04: resource 1 [mem 0xa0300000-0xa03fffff]
[ 0.365999] pci 0000:03:00.0: disabling ATS
[ 0.366023] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[ 0.366030] PCI: CLS 64 bytes, default 64
[ 0.366065] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.366066] software IO TLB: mapped [mem 0x0000000099007000-0x000000009d007000] (64MB)
[ 0.366101] Trying to unpack rootfs image as initramfs...
[ 0.366318] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.366726] Initialise system trusted keyrings
[ 0.366733] Key type blacklist registered
[ 0.366768] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.367835] zbud: loaded
[ 0.368091] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.368213] fuse: init (API version 7.36)
[ 0.368345] integrity: Platform Keyring initialized
[ 0.368347] integrity: Machine keyring initialized
[ 0.376031] Key type asymmetric registered
[ 0.376033] Asymmetric key parser 'x509' registered
[ 0.904513] Freeing initrd memory: 119420K
[ 0.906892] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.906915] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.906950] io scheduler mq-deadline registered
[ 0.907823] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.908177] Monitor-Mwait will be used to enter C-1 state
[ 0.908181] Monitor-Mwait will be used to enter C-2 state
[ 0.908184] ACPI: \_SB_.PR00: Found 2 idle states
[ 0.908668] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.908689] ACPI: button: Sleep Button [SLPB]
[ 0.908720] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.908734] ACPI: button: Power Button [PWRB]
[ 0.908761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.908795] ACPI: button: Power Button [PWRF]
[ 0.909759] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.909762] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.909979] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.911393] Linux agpgart interface v0.103
[ 0.913394] loop: module loaded
[ 0.913591] tun: Universal TUN/TAP device driver, 1.6
[ 0.913610] PPP generic driver version 2.4.2
[ 0.913647] VFIO - User Level meta-driver version: 0.3
[ 0.913731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.913734] ehci-pci: EHCI PCI platform driver
[ 0.913740] ehci-platform: EHCI generic platform driver
[ 0.913746] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.913747] ohci-pci: OHCI PCI platform driver
[ 0.913754] ohci-platform: OHCI generic platform driver
[ 0.913759] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.913784] i8042: PNP: No PS/2 controller found.
[ 0.913815] mousedev: PS/2 mouse device common for all mice
[ 0.913908] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.914576] rtc_cmos rtc_cmos: registered as rtc0
[ 0.914702] rtc_cmos rtc_cmos: setting system clock to 2023-12-16T17:26:08 UTC (1702747568)
[ 0.914713] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.914718] i2c_dev: i2c /dev entries driver
[ 0.915083] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.915102] device-mapper: uevent: version 1.0.3
[ 0.915145] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 0.915160] platform eisa.0: Probing EISA bus 0
[ 0.915162] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.915163] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.915164] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.915165] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.915166] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.915167] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.915168] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.915169] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.915170] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.915171] platform eisa.0: EISA: Detected 0 cards
[ 0.915173] intel_pstate: Intel P-state driver initializing
[ 0.915719] intel_pstate: HWP enabled
[ 0.916034] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.916050] vesafb: mode is 1280x720x32, linelength=5120, pages=0
[ 0.916051] vesafb: scrolling: redraw
[ 0.916051] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.916072] vesafb: framebuffer at 0xb0000000, mapped to 0x0000000064edc5cf, using 3648k, total 3648k
[ 0.916111] fbcon: Deferring console take-over
[ 0.916112] fb0: VESA VGA frame buffer device
[ 0.916156] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:03 [mem 0xfdb00000-0xfdffffff]
[ 0.916158] caller pmc_core_probe+0xb7/0x260 mapping multiple BARs
[ 0.916170] intel_pmc_core INT33A1:00: initialized
[ 0.916204] drop_monitor: Initializing network drop monitor service
[ 0.924513] NET: Registered PF_INET6 protocol family
[ 0.927100] Segment Routing with IPv6
[ 0.927105] In-situ OAM (IOAM) with IPv6
[ 0.927118] NET: Registered PF_PACKET protocol family
[ 0.927222] Key type dns_resolver registered
[ 0.927919] microcode: sig=0xa0655, pf=0x2, revision=0xf8
[ 0.928144] microcode: Microcode Update Driver: v2.2.
[ 0.928147] IPI shorthand broadcast: enabled
[ 0.928160] sched_clock: Marking stable (927314722, 536430)->(995505799, -67654647)
[ 0.928386] registered taskstats version 1
[ 0.928688] Loading compiled-in X.509 certificates
[ 0.929173] Loaded X.509 cert 'Build time autogenerated kernel key: df64dc4cc2938f618a3838239701e819302d2eb5'
[ 0.929626] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.929996] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.929997] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.930011] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.930020] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[ 0.930029] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[ 0.930038] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[ 0.930047] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[ 0.930056] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[ 0.930066] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[ 0.930075] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[ 0.930272] zswap: loaded using pool lzo/zbud
[ 0.930358] Key type .fscrypt registered
[ 0.930359] Key type fscrypt-provisioning registered
[ 0.932171] Key type encrypted registered
[ 0.932173] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.932179] ima: No TPM chip found, activating TPM-bypass!
[ 0.932180] Loading compiled-in module X.509 certificates
[ 0.932546] Loaded X.509 cert 'Build time autogenerated kernel key: df64dc4cc2938f618a3838239701e819302d2eb5'
[ 0.932547] ima: Allocated hash algorithm: sha1
[ 0.932551] ima: No architecture policies found
[ 0.932559] evm: Initialising EVM extended attributes:
[ 0.932559] evm: security.selinux
[ 0.932560] evm: security.SMACK64
[ 0.932561] evm: security.SMACK64EXEC
[ 0.932561] evm: security.SMACK64TRANSMUTE
[ 0.932561] evm: security.SMACK64MMAP
[ 0.932562] evm: security.apparmor
[ 0.932562] evm: security.ima
[ 0.932563] evm: security.capability
[ 0.932563] evm: HMAC attrs: 0x1
[ 0.933303] PM: Magic number: 3:418:441
[ 0.933430] RAS: Correctable Errors collector initialized.
[ 0.934138] Freeing unused decrypted memory: 2036K
[ 0.934483] Freeing unused kernel image (initmem) memory: 3168K
[ 0.969466] Write protecting the kernel read-only data: 32768k
[ 0.969999] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.970159] Freeing unused kernel image (rodata/data gap) memory: 1000K
[ 0.984660] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.984668] Run /init as init process
[ 0.984669] with arguments:
[ 0.984670] /init
[ 0.984671] splash
[ 0.984672] with environment:
[ 0.984672] HOME=/
[ 0.984673] TERM=linux
[ 0.984674] BOOT_IMAGE=/boot/vmlinuz-5.19.0-32-generic
[ 1.039858] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 1.039975] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 1.048807] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.048816] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.049733] ahci 0000:00:17.0: version 3.0
[ 1.049895] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[ 1.050020] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.050026] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.050348] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.050567] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.050571] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.050574] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.050612] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 1.050615] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050617] usb usb1: Product: xHCI Host Controller
[ 1.050618] usb usb1: Manufacturer: Linux 5.19.0-32-generic xhci-hcd
[ 1.050620] usb usb1: SerialNumber: 0000:00:14.0
[ 1.050839] hub 1-0:1.0: USB hub found
[ 1.050856] hub 1-0:1.0: 10 ports detected
[ 1.053324] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 1.053567] cryptd: max_cpu_qlen set to 1000
[ 1.053650] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.054776] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 1.055475] nvme 0000:04:00.0: platform quirk: setting simple suspend
[ 1.056295] nvme nvme0: pci function 0000:04:00.0
[ 1.056663] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.056665] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.056920] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.057061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[ 1.057064] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.057066] usb usb2: Product: xHCI Host Controller
[ 1.057068] usb usb2: Manufacturer: Linux 5.19.0-32-generic xhci-hcd
[ 1.057069] usb usb2: SerialNumber: 0000:00:14.0
[ 1.057178] hub 2-0:1.0: USB hub found
[ 1.057189] hub 2-0:1.0: 4 ports detected
[ 1.062360] AVX2 version of gcm_enc/dec engaged.
[ 1.062401] AES CTR mode by8 optimization enabled
[ 1.062960] ACPI: bus type drm_connector registered
[ 1.069156] nvme nvme0: Shutdown timeout set to 10 seconds
[ 1.072120] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.074185] nvme0n1: p1
[ 1.085627] scsi host0: ahci
[ 1.085719] scsi host1: ahci
[ 1.085812] scsi host2: ahci
[ 1.085897] scsi host3: ahci
[ 1.085921] ata1: SATA max UDMA/133 abar m2048@0xa044b000 port 0xa044b100 irq 123
[ 1.085922] ata2: SATA max UDMA/133 abar m2048@0xa044b000 port 0xa044b180 irq 123
[ 1.085924] ata3: SATA max UDMA/133 abar m2048@0xa044b000 port 0xa044b200 irq 123
[ 1.085925] ata4: SATA max UDMA/133 abar m2048@0xa044b000 port 0xa044b280 irq 123
[ 1.301450] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.317410] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.372661] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d8:bb:c1:37:f5:3c
[ 1.372664] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.372748] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.377513] tsc: Refined TSC clocksource calibration: 2903.999 MHz
[ 1.377517] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc050a48e, max_idle_ns: 440795325698 ns
[ 1.377564] clocksource: Switched to clocksource tsc
[ 1.400152] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.400195] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.401191] ata1.00: ATA-10: CT480BX500SSD1, M6CR056, max UDMA/133
[ 1.402355] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.403077] ata2.00: ATA-10: CT480BX500SSD1, M6CR022, max UDMA/133
[ 1.404064] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.404078] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.404427] ata3.00: supports DRM functions and may not be fully accessible
[ 1.404429] ata3.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133
[ 1.404784] ata2.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.406414] ata1.00: Features: Dev-Sleep
[ 1.406695] ata3.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.409549] ata3.00: Features: Trust Dev-Sleep NCQ-sndrcv NCQ-prio
[ 1.409825] ata3.00: supports DRM functions and may not be fully accessible
[ 1.410393] ata2.00: Features: Dev-Sleep
[ 1.414309] ata1.00: configured for UDMA/133
[ 1.414453] scsi 0:0:0:0: Direct-Access ATA CT480BX500SSD1 056 PQ: 0 ANSI: 5
[ 1.414634] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.414674] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.414685] sd 0:0:0:0: [sda] Write Protect is off
[ 1.414687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.414699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.414714] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.414757] ata3.00: configured for UDMA/133
[ 1.423120] ata2.00: configured for UDMA/133
[ 1.423189] scsi 1:0:0:0: Direct-Access ATA CT480BX500SSD1 R022 PQ: 0 ANSI: 5
[ 1.423421] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.423456] sd 1:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.423466] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.423468] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.423513] scsi 2:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5
[ 1.423529] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.423595] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 1.423688] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.423700] ata3.00: Enabling discard_zeroes_data
[ 1.423709] sd 2:0:0:0: [sdc] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[ 1.423717] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.423719] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.423729] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.423755] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 1.423928] ata3.00: Enabling discard_zeroes_data
[ 1.441882] sda: sda1 sda2
[ 1.442074] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.449935] sdc:
[ 1.450091] sd 2:0:0:0: [sdc] supports TCG Opal
[ 1.450094] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.450419] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 1.450795] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.451991] e1000e 0000:00:1f.6 eno1: renamed from eth0
[ 1.456644] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 1.495934] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
[ 1.495938] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.495939] usb 1-1: Product: USB2.0 Hub
[ 1.495940] usb 1-1: Manufacturer: GenesysLogic
[ 1.496722] hub 1-1:1.0: USB hub found
[ 1.497050] hub 1-1:1.0: 4 ports detected
[ 1.621575] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.644322] usb 2-1: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.26
[ 1.644325] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.644326] usb 2-1: Product: USB3.0 Hub
[ 1.644327] usb 2-1: Manufacturer: GenesysLogic
[ 1.645412] hub 2-1:1.0: USB hub found
[ 1.645725] hub 2-1:1.0: 4 ports detected
[ 1.769414] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 1.920006] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63
[ 1.920008] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.920009] usb 1-2: Product: USB2.1 Hub
[ 1.920010] usb 1-2: Manufacturer: GenesysLogic
[ 1.920788] hub 1-2:1.0: USB hub found
[ 1.921095] hub 1-2:1.0: 4 ports detected
[ 2.045554] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.072603] usb 2-2: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63
[ 2.072606] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.072607] usb 2-2: Product: USB3.1 Hub
[ 2.072608] usb 2-2: Manufacturer: GenesysLogic
[ 2.075136] hub 2-2:1.0: USB hub found
[ 2.075943] hub 2-2:1.0: 4 ports detected
[ 2.145472] usb 2-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 2.166880] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 2.166882] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2.166883] usb 2-1.4: Product: USB 10/100/1000 LAN
[ 2.166884] usb 2-1.4: Manufacturer: Realtek
[ 2.166885] usb 2-1.4: SerialNumber: 000001
[ 2.293411] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 2.360557] usbcore: registered new interface driver r8152
[ 2.362906] [drm] amdgpu kernel modesetting enabled.
[ 2.362944] amdgpu: CRAT table not found
[ 2.362946] amdgpu: Virtual CRAT table created for CPU
[ 2.362955] amdgpu: Topology: Add CPU node
[ 2.362957] usbcore: registered new interface driver cdc_ether
[ 2.363129] [drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x1458:0x231D 0xCA).
[ 2.363137] [drm] register mmio base: 0xA0100000
[ 2.363137] [drm] register mmio size: 524288
[ 2.364111] usbcore: registered new interface driver r8153_ecm
[ 2.364177] [drm] add ip block number 0 <nv_common>
[ 2.364178] [drm] add ip block number 1 <gmc_v10_0>
[ 2.364179] [drm] add ip block number 2 <navi10_ih>
[ 2.364180] [drm] add ip block number 3 <psp>
[ 2.364181] [drm] add ip block number 4 <smu>
[ 2.364182] [drm] add ip block number 5 <dm>
[ 2.364183] [drm] add ip block number 6 <gfx_v10_0>
[ 2.364184] [drm] add ip block number 7 <sdma_v5_0>
[ 2.364184] [drm] add ip block number 8 <vcn_v2_0>
[ 2.364185] [drm] add ip block number 9 <jpeg_v2_0>
[ 2.364196] amdgpu 0000:03:00.0: No more image in the PCI ROM
[ 2.364208] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from ROM BAR
[ 2.364210] amdgpu: ATOM BIOS: xxx-xxx-xxx
[ 2.364219] [drm] VCN decode is enabled in VM mode
[ 2.364220] [drm] VCN encode is enabled in VM mode
[ 2.364221] [drm] JPEG decode is enabled in VM mode
[ 2.364222] checking generic (b0000000 390000) vs hw (b0000000 10000000)
[ 2.364223] fb0: switching to (null) from VESA VGA
[ 2.364293] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 2.364296] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[ 2.364324] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 2.364329] amdgpu 0000:03:00.0: amdgpu: VRAM: 6128M 0x0000008000000000 - 0x000000817EFFFFFF (6128M used)
[ 2.364330] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[ 2.364332] amdgpu 0000:03:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[ 2.364339] [drm] Detected VRAM RAM=6128M, BAR=256M
[ 2.364339] [drm] RAM width 192bits GDDR6
[ 2.364365] [drm] amdgpu: 6128M of VRAM memory ready
[ 2.364366] [drm] amdgpu: 7967M of GTT memory ready.
[ 2.364373] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.364451] [drm] PCIE GART of 512M enabled (table at 0x0000008000384000).
[ 2.364613] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[ 2.364616] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[ 2.365498] [drm] Found VCN firmware Version ENC: 1.16 DEC: 5 VEP: 0 Revision: 4
[ 2.365502] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[ 2.417582] [drm] reserve 0x900000 from 0x817e600000 for PSP TMR
[ 2.442799] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[ 2.442801] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.442802] usb 1-5: Product: USB2.0 Hub
[ 2.444029] hub 1-5:1.0: USB hub found
[ 2.444355] hub 1-5:1.0: 4 ports detected
[ 2.459519] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 2.465578] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 2.465579] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 2.465625] amdgpu 0000:03:00.0: amdgpu: use vbios provided pptable
[ 2.465627] amdgpu 0000:03:00.0: amdgpu: smc_dpm_info table revision(format.content): 4.5
[ 2.501504] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[ 2.501640] [drm] Display Core initialized with v3.2.187!
[ 2.545400] usb 1-2.4: new full-speed USB device number 5 using xhci_hcd
[ 2.597880] [drm] kiq ring mec 2 pipe 1 q 0
[ 2.599960] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 2.600101] [drm] JPEG decode initialized successfully.
[ 2.601985] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 2.602134] amdgpu: sdma_bitmap: ffff
[ 2.633233] memmap_init_zone_device initialised 1572864 pages in 8ms
[ 2.633237] amdgpu: HMM registered 6128MB device memory
[ 2.633483] amdgpu: SRAT table not found
[ 2.633483] amdgpu: Virtual CRAT table created for GPU
[ 2.633598] amdgpu: Topology: Add dGPU node [0x731f:0x1002]
[ 2.633600] kfd kfd: amdgpu: added device 1002:731f
[ 2.633614] amdgpu 0000:03:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 36
[ 2.633692] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 2.633693] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 2.633694] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 2.633695] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 2.633696] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 2.633696] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 2.633697] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 2.633698] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 2.633698] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 2.633699] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 2.633700] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 2.633701] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[ 2.633702] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 0 on hub 1
[ 2.633702] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 1 on hub 1
[ 2.633703] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 4 on hub 1
[ 2.633704] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[ 2.634546] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm
[ 2.635053] [drm] Initialized amdgpu 3.47.0 20150101 for 0000:03:00.0 on minor 0
[ 2.638799] fbcon: amdgpudrmfb (fb0) is primary device
[ 2.638800] fbcon: Deferring console take-over
[ 2.638802] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 2.680151] usb 1-2.4: New USB device found, idVendor=045e, idProduct=0719, bcdDevice= 1.00
[ 2.680154] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.680155] usb 1-2.4: Product: Xbox 360 Wireless Receiver for Windows
[ 2.680156] usb 1-2.4: Manufacturer: ©Microsoft
[ 2.680157] usb 1-2.4: SerialNumber: E0EB6E80
[ 2.757966] usb 2-1.4: reset SuperSpeed USB device number 4 using xhci_hcd
[ 2.799792] r8152 2-1.4:1.0: load rtl8153a-4 v2 02/07/20 successfully
[ 2.825790] r8152 2-1.4:1.0 eth0: v1.12.13
[ 2.834796] r8152 2-1.4:1.0 enx00e04c6800fa: renamed from eth0
[ 2.905483] usb 1-9: new full-speed USB device number 6 using xhci_hcd
[ 3.056507] usb 1-9: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 3.056519] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.056525] usb 1-9: Product: USB Receiver
[ 3.056529] usb 1-9: Manufacturer: Logitech
[ 3.185445] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[ 3.337331] usb 1-10: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[ 3.337343] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.337348] usb 1-10: Product: USB Receiver
[ 3.337353] usb 1-10: Manufacturer: Logitech
[ 3.346325] hid: raw HID events driver (C) Jiri Kosina
[ 3.356899] usbcore: registered new interface driver usbhid
[ 3.356901] usbhid: USB HID core driver
[ 3.359368] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C534.0001/input/input3
[ 3.417830] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9/input0
[ 3.418491] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C534.0002/input/input4
[ 3.419009] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C534.0002/input/input5
[ 3.477736] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C534.0002/input/input6
[ 3.478223] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9/input1
[ 3.478659] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046D:C52B.0003/input/input9
[ 3.537829] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10/input0
[ 3.538463] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0004/input/input10
[ 3.539012] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0004/input/input11
[ 3.597724] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0004/input/input12
[ 3.598176] hid-generic 0003:046D:C52B.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10/input1
[ 3.598730] hid-generic 0003:046D:C52B.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2
[ 3.666341] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9/input0
[ 3.830696] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9/input1
[ 3.891377] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[ 3.891967] input: Logitech Wireless Mouse PID:4091 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C534.0002/0003:046D:4091.0006/input/input14
[ 3.937846] hid-generic 0003:046D:4091.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4091] on usb-0000:00:14.0-9/input1:2
[ 4.046849] logitech-djreceiver 0003:046D:C52B.0005: hiddev1,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2
[ 4.168340] input: Logitech Wireless Device PID:408a Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0005/0003:046D:408A.0007/input/input18
[ 4.168539] input: Logitech Wireless Device PID:408a Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0005/0003:046D:408A.0007/input/input19
[ 4.168871] hid-generic 0003:046D:408A.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:408a] on usb-0000:00:14.0-10/input2:1
[ 4.172371] input: Logitech Wireless Device PID:408a Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0005/0003:046D:408A.0008/input/input23
[ 4.172722] input: Logitech Wireless Device PID:408a Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0005/0003:046D:408A.0008/input/input24
[ 4.173320] hid-generic 0003:046D:408A.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Device PID:408a] on usb-0000:00:14.0-10/input2:2
[ 4.235508] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C534.0002/0003:046D:4091.0006/input/input28
[ 4.235962] logitech-hidpp-device 0003:046D:4091.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-9/input1:2
[ 4.333819] input: Logitech MX Keys as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0005/0003:046D:408A.0007/input/input29
[ 4.334442] logitech-hidpp-device 0003:046D:408A.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Keys] on usb-0000:00:14.0-10/input2:1
[ 4.441829] input: Logitech MX Keys as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0005/0003:046D:408A.0008/input/input30
[ 4.442465] logitech-hidpp-device 0003:046D:408A.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Keys] on usb-0000:00:14.0-10/input2:2
[ 4.573571] [drm] DSC precompute is not needed.
[ 4.775106] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[ 4.955527] systemd[1]: Inserted module 'autofs4'
[ 4.972988] systemd[1]: systemd 249.11-0ubuntu3.11 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.973052] systemd[1]: Detected architecture x86-64.
[ 4.973418] systemd[1]: Hostname set to <ACER-xk2308>.
[ 5.199615] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.200589] systemd[1]: Created slice Slice /system/modprobe.
[ 5.200742] systemd[1]: Created slice User and Session Slice.
[ 5.200786] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.200892] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.200945] systemd[1]: Reached target Slice Units.
[ 5.200957] systemd[1]: Reached target Mounting snaps.
[ 5.200978] systemd[1]: Reached target Local Verity Protected Volumes.
[ 5.203130] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 5.203224] systemd[1]: Listening on Syslog Socket.
[ 5.203474] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.203509] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.204546] systemd[1]: Listening on Journal Audit Socket.
[ 5.204601] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.204667] systemd[1]: Listening on Journal Socket.
[ 5.204756] systemd[1]: Listening on udev Control Socket.
[ 5.204813] systemd[1]: Listening on udev Kernel Socket.
[ 5.205210] systemd[1]: Mounting Huge Pages File System...
[ 5.205702] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.206127] systemd[1]: Mounting NFSD configuration filesystem...
[ 5.206665] systemd[1]: Mounting Kernel Debug File System...
[ 5.207116] systemd[1]: Mounting Kernel Trace File System...
[ 5.208089] systemd[1]: Starting Journal Service...
[ 5.208161] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 5.208904] systemd[1]: Starting Set the console keyboard layout...
[ 5.209445] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.210018] systemd[1]: Starting Load Kernel Module configfs...
[ 5.210523] systemd[1]: Starting Load Kernel Module drm...
[ 5.211069] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 5.211621] systemd[1]: Starting Load Kernel Module fuse...
[ 5.211774] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 5.216398] systemd[1]: Starting Load Kernel Modules...
[ 5.216867] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.217350] systemd[1]: Starting Coldplug All udev Devices...
[ 5.218336] systemd[1]: Mounted Huge Pages File System.
[ 5.218418] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.218507] systemd[1]: Mounted Kernel Debug File System.
[ 5.218594] systemd[1]: Mounted Kernel Trace File System.
[ 5.218788] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.218993] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.219163] systemd[1]: Finished Load Kernel Module configfs.
[ 5.219314] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.219432] systemd[1]: Finished Load Kernel Module drm.
[ 5.219603] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 5.219727] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 5.219860] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.219996] systemd[1]: Finished Load Kernel Module fuse.
[ 5.220571] systemd[1]: Mounting FUSE Control File System...
[ 5.221105] systemd[1]: Mounting Kernel Configuration File System...
[ 5.222462] systemd[1]: Mounted FUSE Control File System.
[ 5.222534] systemd[1]: Mounted Kernel Configuration File System.
[ 5.223019] EXT4-fs (sda1): re-mounted. Quota mode: none.
[ 5.223625] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.224162] systemd[1]: Activating swap /swapfile...
[ 5.224213] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 5.224741] systemd[1]: Starting Load/Save Random Seed...
[ 5.225281] systemd[1]: Starting Create System Users...
[ 5.235329] Adding 615696k swap on /swapfile. Priority:-2 extents:3 across:632080k SSFS
[ 5.235380] systemd[1]: Activated swap /swapfile.
[ 5.235448] systemd[1]: Reached target Swaps.
[ 5.237181] systemd[1]: Finished Load/Save Random Seed.
[ 5.237301] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 5.238698] RPC: Registered named UNIX socket transport module.
[ 5.238700] RPC: Registered udp transport module.
[ 5.238700] RPC: Registered tcp transport module.
[ 5.238701] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.240479] lp: driver loaded but no devices found
[ 5.243179] ppdev: user-space parallel port driver
[ 5.252490] systemd[1]: Finished Load Kernel Modules.
[ 5.253130] systemd[1]: Starting Apply Kernel Variables...
[ 5.255076] systemd[1]: Started Journal Service.
[ 5.261366] systemd-journald[691]: Received client request to flush runtime journal.
[ 5.274440] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.326718] loop0: detected capacity change from 0 to 8
[ 5.327930] loop1: detected capacity change from 0 to 216720
[ 5.331382] loop2: detected capacity change from 0 to 113992
[ 5.331857] loop3: detected capacity change from 0 to 113992
[ 5.336515] loop4: detected capacity change from 0 to 129976
[ 5.338560] loop5: detected capacity change from 0 to 151784
[ 5.339663] loop6: detected capacity change from 0 to 151352
[ 5.344770] loop7: detected capacity change from 0 to 136320
[ 5.347955] loop8: detected capacity change from 0 to 337560
[ 5.350322] loop9: detected capacity change from 0 to 716176
[ 5.352418] loop10: detected capacity change from 0 to 1017816
[ 5.353968] loop11: detected capacity change from 0 to 280
[ 5.357557] loop12: detected capacity change from 0 to 187776
[ 5.360584] loop13: detected capacity change from 0 to 75960
[ 5.362839] loop14: detected capacity change from 0 to 352984
[ 5.363494] loop15: detected capacity change from 0 to 352984
[ 5.364878] loop16: detected capacity change from 0 to 919904
[ 5.366721] loop17: detected capacity change from 0 to 44112
[ 5.367230] loop18: detected capacity change from 0 to 42896
[ 5.370548] loop19: detected capacity change from 0 to 919392
[ 5.372167] loop20: detected capacity change from 0 to 232
[ 5.373109] loop21: detected capacity change from 0 to 130568
[ 5.376285] loop22: detected capacity change from 0 to 130728
[ 5.377370] loop23: detected capacity change from 0 to 1065880
[ 5.381642] loop24: detected capacity change from 0 to 72896
[ 5.386515] loop25: detected capacity change from 0 to 16224
[ 5.388839] loop26: detected capacity change from 0 to 32
[ 5.392279] loop27: detected capacity change from 0 to 499136
[ 5.393547] loop28: detected capacity change from 0 to 848128
[ 5.394291] loop29: detected capacity change from 0 to 848128
[ 5.396175] loop30: detected capacity change from 0 to 666536
[ 5.396901] loop31: detected capacity change from 0 to 253672
[ 5.399648] loop32: detected capacity change from 0 to 958960
[ 5.400397] loop33: detected capacity change from 0 to 710960
[ 5.498493] audit: type=1400 audit(1702747573.078:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=797 comm="apparmor_parser"
[ 5.498631] audit: type=1400 audit(1702747573.078:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=800 comm="apparmor_parser"
[ 5.498696] audit: type=1400 audit(1702747573.078:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=789 comm="apparmor_parser"
[ 5.498699] audit: type=1400 audit(1702747573.078:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=789 comm="apparmor_parser"
[ 5.498842] audit: type=1400 audit(1702747573.078:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=788 comm="apparmor_parser"
[ 5.499300] audit: type=1400 audit(1702747573.078:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=791 comm="apparmor_parser"
[ 5.499303] audit: type=1400 audit(1702747573.078:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=791 comm="apparmor_parser"
[ 5.500457] audit: type=1400 audit(1702747573.078:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=793 comm="apparmor_parser"
[ 5.500459] audit: type=1400 audit(1702747573.078:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=793 comm="apparmor_parser"
[ 5.500461] audit: type=1400 audit(1702747573.078:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=793 comm="apparmor_parser"
[ 5.770535] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.771564] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.797810] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 5.797814] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.797815] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.797816] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.089260] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[ 6.141121] intel_tcc_cooling: Programmable TCC Offset detected
[ 6.151558] intel_rapl_common: Found RAPL domain package
[ 6.151560] intel_rapl_common: Found RAPL domain core
[ 6.151562] intel_rapl_common: Found RAPL domain dram
[ 6.158032] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[ 6.166299] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 6.167678] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input31
[ 6.167726] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input32
[ 6.167770] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input33
[ 6.167819] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input34
[ 6.167880] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input35
[ 6.167933] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input36
[ 6.231964] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.231968] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.231969] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.231971] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.231971] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.231972] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.231973] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.231974] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.242583] usbcore: registered new interface driver xpad
[ 6.244642] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37
[ 6.244695] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38
[ 6.244739] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input39
[ 6.244807] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40
[ 6.244870] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41
[ 7.315015] loop34: detected capacity change from 0 to 8
[ 7.367353] logitech-hidpp-device 0003:046D:408A.0007: HID++ 4.5 device connected.
[ 9.803906] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9.803989] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 13.104590] vboxdrv: loading out-of-tree module taints kernel.
[ 13.104760] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 13.111059] vboxdrv: Found 12 processor cores
[ 13.133569] vboxdrv: TSC mode is Invariant, tentative frequency 2903999284 Hz
[ 13.133572] vboxdrv: Successfully loaded version 6.1.38_Ubuntu r153438 (interface 0x00320000)
[ 13.141157] VBoxNetFlt: Successfully started.
[ 13.146128] VBoxNetAdp: Successfully started.
[ 13.222865] NFSD: Using nfsdcld client tracking operations.
[ 13.222867] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)
[ 15.327390] logitech-hidpp-device 0003:046D:4091.0006: HID++ 4.5 device connected.
------systemd-analyze time-------
Startup finished in 4.926s (kernel) + 8.302s (userspace) = 13.228s
graphical.target reached after 8.220s in userspace
------systemd-analyze blame-------
6.388s NetworkManager-wait-online.service
1.041s snapd.service
960ms systemd-journal-flush.service
716ms blueman-mechanism.service
710ms dev-loop33.device
709ms dev-loop28.device
703ms dev-loop32.device
701ms dev-loop30.device
697ms dev-loop31.device
692ms dev-loop29.device
688ms dev-loop27.device
668ms networkd-dispatcher.service
664ms dev-loop25.device
659ms dev-loop23.device
646ms ufw.service
644ms dev-loop24.device
644ms dev-loop19.device
634ms dev-loop21.device
626ms dev-loop22.device
608ms dev-loop18.device
606ms dev-loop15.device
602ms dev-loop16.device
601ms dev-loop14.device
588ms dev-loop17.device
582ms dev-loop12.device
564ms dev-sda1.device
560ms dev-loop5.device
560ms dev-loop6.device
556ms dev-loop13.device
556ms dev-loop10.device
555ms dev-loop7.device
553ms dev-loop8.device
551ms dev-loop9.device
550ms dev-loop26.device
541ms dev-loop1.device
527ms dev-loop3.device
516ms dev-loop20.device
511ms dev-loop4.device
510ms udisks2.service
509ms dev-loop2.device
479ms dev-loop11.device
397ms dev-loop0.device
344ms accounts-daemon.service
309ms avahi-daemon.service
307ms NetworkManager.service
301ms polkit.service
269ms smartmontools.service
262ms thermald.service
261ms systemd-logind.service
261ms wpa_supplicant.service
246ms ModemManager.service
227ms gpu-manager.service
223ms snapd.apparmor.service
217ms systemd-udevd.service
190ms loadcpufreq.service
184ms systemd-resolved.service
181ms media-home-MyDocs.mount
161ms apparmor.service
158ms cups.service
152ms snapd.seeded.service
132ms user@110.service
128ms networking.service
128ms nfs-server.service
119ms rsyslog.service
118ms lightdm.service
116ms plymouth-quit-wait.service
114ms e2scrub_reap.service
105ms grub-common.service
103ms user@1000.service
96ms upower.service
90ms media-home-WinTools.mount
85ms snap-bare-5.mount
84ms snap-core-16202.mount
81ms snap-core18-2796.mount
80ms snap-core18-2812.mount
79ms systemd-timedated.service
77ms snap-core20-2015.mount
75ms snap-core22-1033.mount
74ms systemd-udev-trigger.service
74ms systemd-timesyncd.service
73ms snap-core22-864.mount
70ms snap-cups-980.mount
69ms proc-fs-nfsd.mount
69ms lm-sensors.service
67ms alsa-restore.service
65ms virtualbox.service
65ms snap-gnome\x2d3\x2d28\x2d1804-198.mount
64ms systemd-hostnamed.service
63ms snap-gnome\x2d3\x2d38\x2d2004-143.mount
61ms snap-gnome\x2d42\x2d2204-141.mount
59ms snap-gtk2\x2dcommon\x2dthemes-13.mount
58ms systemd-tmpfiles-setup.service
57ms snap-gtk\x2dcommon\x2dthemes-1535.mount
53ms snap-hunspell\x2ddictionaries\x2d1\x2d7\x2d2004-2.mount
52ms keyboard-setup.service
51ms systemd-sysusers.service
51ms snap-joplin\x2ddesktop-42.mount
50ms snap-joplin\x2ddesktop-44.mount
49ms snap-kde\x2dframeworks\x2d5\x2d102\x2dqt\x2d5\x2d15\x2d8\x2dcore22-5.mount
47ms snap-keepassxc-1689.mount
46ms systemd-journald.service
46ms snap-keepassxc-1762.mount
43ms snap-kf5\x2d5\x2d105\x2dqt\x2d5\x2d15\x2d9\x2dcore22-11.mount
42ms snap-leagueoflegends-152.mount
42ms systemd-tmpfiles-setup-dev.service
41ms snap-minetest-1864.mount
38ms snap-minetest-1882.mount
37ms snap-nightmayr\x2dkf5\x2dqt\x2d5\x2d15\x2d2\x2dcore20-30.mount
36ms grub-initrd-fallback.service
36ms systemd-modules-load.service
33ms snap-pinta-26.mount
29ms snap-pulsemixer-283.mount
25ms snap-software\x2dboutique-57.mount
22ms snap-subtitle\x2dedit-7.mount
22ms systemd-sysctl.service
21ms kerneloops.service
21ms plymouth-read-write.service
21ms plymouth-start.service
21ms snap-telegram\x2ddesktop-5300.mount
20ms snap-telegram\x2ddesktop-5305.mount
19ms systemd-binfmt.service
18ms snap-wine\x2dplatform\x2d5\x2dstaging-34.mount
18ms snap-wine\x2dplatform\x2d5\x2dstaging-36.mount
16ms rpc-statd.service
15ms snap-wine\x2dplatform\x2druntime-331.mount
15ms nfs-mountd.service
14ms snap-wine\x2dplatform\x2druntime-349.mount
14ms rpcbind.service
13ms nfs-idmapd.service
13ms systemd-update-utmp.service
13ms dev-hugepages.mount
12ms dev-mqueue.mount
12ms systemd-random-seed.service
11ms sys-kernel-debug.mount
11ms sys-kernel-tracing.mount
11ms run-rpc_pipefs.mount
11ms swapfile.swap
9ms proc-sys-fs-binfmt_misc.mount
9ms kmod-static-nodes.service
8ms modprobe@configfs.service
8ms modprobe@drm.service
8ms nfsdcld.service
8ms modprobe@fuse.service
7ms hddtemp.service
7ms NetworkManager-dispatcher.service
6ms systemd-remount-fs.service
6ms cpufrequtils.service
6ms user-runtime-dir@1000.service
5ms ifupdown-pre.service
4ms systemd-user-sessions.service
4ms nfs-blkmap.service
4ms console-setup.service
4ms openvpn.service
3ms setvtrgb.service
3ms user-runtime-dir@110.service
3ms systemd-update-utmp-runlevel.service
3ms rtkit-daemon.service
2ms modprobe@efi_pstore.service
1ms sys-fs-fuse-connections.mount
1ms rpc-statd-notify.service
1ms sys-kernel-config.mount
504us snapd.socket
------systemd-analyze blame-------
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @8.220s
└─multi-user.target @8.220s
└─virtualbox.service @8.154s +65ms
└─network-online.target @8.146s
└─NetworkManager-wait-online.service @1.757s +6.388s
└─NetworkManager.service @1.448s +307ms
└─dbus.service @1.447s
└─basic.target @1.441s
└─sockets.target @1.441s
└─snapd.socket @1.440s +504us
└─sysinit.target @1.431s
└─systemd-timesyncd.service @1.357s +74ms
└─systemd-tmpfiles-setup.service @1.290s +58ms
└─systemd-journal-flush.service @329ms +960ms
└─systemd-journald.service @281ms +46ms
└─systemd-journald.socket @278ms
└─-.mount @272ms
└─-.slice @272ms
-----ls -l /var/crash--------
total 0
-----lsblk -fe7--------
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
sda
├─sda1 ext4 1.0 UBUNTU ee2f4425-cb03-4ffe-a80f-3cfb5ef81775 26,4G 51% /
└─sda2 ext4 1.0 MyDocs 4bea60a1-932c-40c0-82b5-31622fc3fabc 142,7G 57% /media/nomdutilisateur/MyDocs
sdb
├─sdb1 ntfs Windows 062FDE8B0C7254F8
├─sdb2
├─sdb5 ntfs WinTools 157BC523529514C4 269,1G 21% /media/nomdutilisateur/WinTools
└─sdb6 ext4 1.0 Backup a539ecdd-74c8-4264-a43f-386a774a516d
sdc
nvme0n1
└─nvme0n1p1 ntfs 2To 56A65AA8A65A87FF
-----cat /etc/fstab--------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=ee2f4425-cb03-4ffe-a80f-3cfb5ef81775 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
UUID=4bea60a1-932c-40c0-82b5-31622fc3fabc /media/nomdutilisateur/MyDocs auto nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=157BC523529514C4 /media/nomdutilisateur/WinTools auto nosuid,nodev,nofail,x-gvfs-show 0 0Boot info :
boot-repair-4ppa2065 [20231216_1733]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/nvme0n1.
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Windows is installed in the MBR of /dev/sdb.
=> libparted MBR boot code is installed in the MBR of /dev/sdc.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdd and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,2)/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
gettext boot extcmd bufio verifiers crypto terminal normal datetime date
mmap drivemap blocklist archelp newc vga_text relocator video chain ntldr
search_label search_fs_file search_fs_uuid search keylayouts at_keyboard
pci usb usb_keyboard gcry_md5 hashsum gcry_crc gzio xzio lzopio lspci
fshelp ext2 xfs acpi iso9660 gcry_sha1 udf exfat font ventoy read halt
video_fb vbe linux linux16 test true sleep reboot echo bitmap gfxterm
bitmap_scale trig video_colors gfxmenu videotest videoinfo diskfilter
raid6rec zstd btrfs functional_test videotest_checksum video_cirrus
video_bochs vga minicmd help configfile tr biosdisk disk ls tar squash4
pbkdf2 gcry_sha512 password_pbkdf2 all_video png jpeg part_gpt part_msdos
fat ntfs loopback gfxterm_background procfs gfxterm_menu
---------------------------------------------------------------------------
nvme0n1p1: _____________________________________________________________________
File system: ntfs
Boot sector type: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sda1 and looks at sector 43169248 of the same hard
drive for core.img, but core.img can not be found at
this location.
Operating System: Ubuntu 22.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10 or 11
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sdb5 starts
at sector 4096. But according to the info from fdisk,
sdb5 starts at sector 16072.
Operating System:
Boot files:
sdb6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd1: __________________________________________________________________________
File system: exfat
Boot sector type: -
Boot sector info:
Mounting failed: mount: /mnt/BootInfo/sdd1: /dev/sdd1 déjà monté ou point de montage actif.
sdd2: __________________________________________________________________________
File system: iso9660
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sdd2 and looks at sector 0 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System:
Boot files: /boot/grub/grub.cfg
================================ 2 OS detected =================================
OS#1: Ubuntu 22.04.3 LTS on sda1
OS#2: Windows 10 or 11 on sdb1
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] from Advanced Micro Devices, Inc. [AMD/ATI]
Live-session OS is Ubuntu 64-bit (Ubuntu 22.04.1 LTS, jammy, x86_64)
===================================== UEFI =====================================
BIOS/UEFI firmware: 1.80(5.17) from American Megatrends Inc.
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.
SecureBoot disabled (confirmed by mokutil).
BootCurrent: 0003
Timeout: 0 seconds
BootOrder: 0001,0003,0002
Boot0001* Hard Drive BBS(HD,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0200)..GO..NO..........C.T.4.8.0.B.X.5.0.0.S.S.D.1...................\.,.@.r.d.=.X..........A...........................>..Gd-.;.A..MQ..L.2.2.9.4.6.E.E.8.C.3.A.C. . . . . . . . ........BO..NO..........S.a.m.s.u.n.g. .S.S.D. .9.8.0. .P.R.O. .2.T.B...................\.,.@.r.d.=.X..........A...........................%8.1.E......4..Gd-.;.A..MQ..L.S.6.9.E.N.F.0.W.B.2.5.4.8.1.Z........BO..NO..........C.T.4.8.0.B.X.5.0.0.S.S.D.1...................\.,.@.r.d.=.X..........A...........................>..Gd-.;.A..MQ..L.9.1.8.3.1.E.D.9.3.D.5.9. . . . . . . . ........BO..NO..........C.r.u.c.i.a.l._.C.T.5.2.5.M.X.3.0.0.S.S.D.1...................\.,.@.r.d.=.X..........A...........................>..Gd-.;.A..MQ..L. . . . . . . . .7.1.9.4.A.1.2.0.D.5.4.E........BO
Boot0002* USB KEY BBS(HD,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0b00)..GO..NO..........K.i.n.g.s.t.o.n.D.a.t.a.T.r.a.v.e.l.e.r. .3...0.P.M.A.P...................\.,.@.r.d.=.X..........A.............................F..Gd-.;.A..MQ..L.E.0.D.5.5.E.6.D.6.6.3.8.E.4.3.0.C.9.4.C.0.E.7.F........BO
Boot0003* UEFI: KingstonDataTraveler 3.0PMAP, Partition 2 PciRoot(0x0)/Pci(0x14,0x0)/USB(16,0)/USB(2,0)/HD(2,MBR,0x9b94b95f,0x39bc000,0x10000)..BO
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
nvme0n1 : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes
sdb : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
nvme0n1p1 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdb5 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdb1 : is-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sdb6 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sda2 : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, end-after-100GB
sda1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ng, update-grub, not-far
sdc : no-os, 64, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
nvme0n1p1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot
sdb6 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
nvme0n1p1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
sdb5 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb6 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sda2 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda1 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sdc : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 64C1826A-6B1B-4C9B-903F-1F35EECE94FB
Start End Sectors Size Type
nvme0n1p1 2048 3907028991 3907026944 1.8T Microsoft basic data
Disk sda: 447.13 GiB, 480103981056 bytes, 937703088 sectors
Disk identifier: 0x94889eca
Boot Start End Sectors Size Id Type
sda1 2048 126722047 126720000 60.4G 83 Linux
sda2 126722048 937701375 810979328 386.7G 83 Linux
Disk sdb: 447.13 GiB, 480103981056 bytes, 937703088 sectors
Disk identifier: 0xaacc1b0d
Boot Start End Sectors Size Id Type
sdb1 * 803158016 937701375 134543360 64.2G 7 HPFS/NTFS/exFAT
sdb2 16009 803158015 803142007 383G f W95 Ext'd (LBA)
sdb5 16072 718456831 718440760 342.6G 7 HPFS/NTFS/exFAT
sdb6 718458880 803153919 84695040 40.4G 83 Linux
Partition table entries are not in disk order.
Disk sdc: 489.05 GiB, 525112713216 bytes, 1025610768 sectors
Disk identifier: 0x4e880916
Disk sdd: 28.9 GiB, 31029460992 bytes, 60604416 sectors
Disk identifier: 0x9b94b95f
Boot Start End Sectors Size Id Type
sdd1 * 2048 60538879 60536832 28.9G 7 HPFS/NTFS/exFAT
sdd2 60538880 60604415 65536 32M ef EFI (FAT-12/16/32)
Disk mapper/ventoy: 2.31 GiB, 2475399168 bytes, 4834764 sectors
Disk identifier: 4DFFD6B8-661A-469C-8D23-526E4A373B04
Start End Sectors Size Type
mapper/ventoy-part1 64 4825603 4825540 2.3G Microsoft basic data
mapper/ventoy-part2 4825604 4834099 8496 4.1M EFI System
mapper/ventoy-part3 4834100 4834699 600 300K Microsoft basic data
parted -lm (filtered): _________________________________________________________
sda:480GB:scsi:512:512:msdos:ATA CT480BX500SSD1:;
1:1049kB:64.9GB:64.9GB:ext4::;
2:64.9GB:480GB:415GB:ext4::;
sdb:480GB:scsi:512:512:msdos:ATA CT480BX500SSD1:;
2:8197kB:411GB:411GB:::lba;
5:8229kB:368GB:368GB:ntfs::;
6:368GB:411GB:43.4GB:ext4::;
1:411GB:480GB:68.9GB:ntfs::boot;
sdc:525GB:scsi:512:512:msdos:ATA Crucial_CT525MX3:;
sdd:31.0GB:scsi:512:512:msdos:Kingston DataTraveler 3.0:;
1:1049kB:31.0GB:31.0GB:::boot;
2:31.0GB:31.0GB:33.6MB:fat16::esp;
mapper/ventoy:2475MB:dm:512:512:gpt:Linux device-mapper (linear):;
1:32.8kB:2471MB:2471MB::ISO9660:hidden, msftdata;
2:2471MB:2475MB:4350kB::Appended2:boot, esp;
3:2475MB:2475MB:307kB::Gap1:hidden, msftdata;
nvme0n1:2000GB:nvme:512:512:gpt:Samsung SSD 980 PRO 2TB:;
1:1049kB:2000GB:2000GB:ntfs::msftdata;
Free space >10MiB: ______________________________________________________________
sdc: 0.00MiB:500787MiB:500787MiB
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ext4 ee2f4425-cb03-4ffe-a80f-3cfb5ef81775 94889eca-01 UBUNTU
└─sda2 ext4 4bea60a1-932c-40c0-82b5-31622fc3fabc 94889eca-02 MyDocs
sdb
├─sdb1 ntfs 062FDE8B0C7254F8 aacc1b0d-01 Windows
├─sdb2 aacc1b0d-02
├─sdb5 ntfs 157BC523529514C4 aacc1b0d-05 WinTools
└─sdb6 ext4 a539ecdd-74c8-4264-a43f-386a774a516d aacc1b0d-06 Backup
sdc
sdd
├─sdd1 exfat 0B60-D2C7 9b94b95f-01 Kingston32
│ └─ventoy
└─sdd2 iso9660 2022-08-10-18-35-19-00 Xubuntu 22.04.1 LTS amd64
nvme0n1
└─nvme0n1p1 ntfs 56A65AA8A65A87FF 7b25fe0f-bcf1-4777-9301-83ce7dbcff78 2To
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/mapper/ventoy 0 100% /cdrom
/dev/nvme0n1p1 1.5T 18% /mnt/boot-sav/nvme0n1p1
/dev/sda1 26.4G 51% /mnt/boot-sav/sda1
/dev/sda2 142.7G 57% /mnt/boot-sav/sda2
/dev/sdb1 34.1G 47% /mnt/boot-sav/sdb1
/dev/sdb5 269.1G 21% /mnt/boot-sav/sdb5
/dev/sdb6 11.1G 67% /mnt/boot-sav/sdb6
Mount options (filtered): ______________________________________________________
/dev/mapper/ventoy iso9660 ro,noatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8
/dev/nvme0n1p1 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda1 ext4 rw,relatime
/dev/sda2 ext4 rw,relatime
/dev/sdb1 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdb5 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdb6 ext4 rw,relatime
============================== ls -R /dev/mapper/ ==============================
/dev/mapper:
control
ventoy
====================== sda1/boot/grub/grub.cfg (filtered) ======================
Linux GNU/Linux ee2f4425-cb03-4ffe-a80f-3cfb5ef81775
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
Windows
========================== sda1/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=ee2f4425-cb03-4ffe-a80f-3cfb5ef81775 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
UUID=4bea60a1-932c-40c0-82b5-31622fc3fabc /media/home/MyDocs auto nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=157BC523529514C4 /media/home/WinTools auto nosuid,nodev,nofail,x-gvfs-show 0 0
======================= sda1/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=1
GRUB_DISTRIBUTOR="Linux "
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash loglevel=3 amdgpu.ppfeaturemask=0xffffffff"
GRUB_CMDLINE_LINUX="loglevel=3"
GRUB_DISABLE_OS_PROBER=true
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_GFXMODE=1280x720
GRUB_THEME=/boot/grub/themes/poly-dark/theme.txt
==================== sda1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
13,690879822 = 14,700470272 boot/grub/grub.cfg 1
23,571311951 = 25,309503488 boot/grub/i386-pc/core.img 1
56,199291229 = 60,343529472 boot/vmlinuz 1
56,199291229 = 60,343529472 boot/vmlinuz-5.15.0-91-generic 1
23,356441498 = 25,078788096 boot/vmlinuz-5.19.0-32-generic 134
23,356441498 = 25,078788096 boot/vmlinuz.old 134
56,829097748 = 61,019779072 boot/initrd.img 3
56,829097748 = 61,019779072 boot/initrd.img-5.15.0-91-generic 3
59,052902222 = 63,407570944 boot/initrd.img-5.19.0-32-generic 15
59,052902222 = 63,407570944 boot/initrd.img.old 15
===================== sda1: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18683 Apr 15 2022 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Apr 15 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Feb 21 2022 35_fwupd
-rwxr-xr-x 1 root root 290 Mar 10 2023 40_custom
-rwxr-xr-x 1 root root 215 Apr 15 2022 41_custom
===================== sda1/etc/grub.d/40_custom (filtered) =====================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows" {
insmod ntfs
set root='(hd1,1)'
chainloader +1
}
====================== sdd2/boot/grub/grub.cfg (filtered) ======================
Try or Install Xubuntu
Xubuntu (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings
Test memory
==================== sdd2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown BootLoader on sdb5
================================= User choice ==================================
Is there RAID on this computer? no
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to reset grubenv) and reinstall the grub2 of
sda1 into the MBR of sda.
Grub-efi would not be selected by default because no ESP detected.
Additional repair would be performed: unhide-bootmenu-10s
Confirmation request before suggested repair: __________________________________
LegacyWindows detected. The boot of your PC is in EFI mode. You may want to retry after changing it to BIOS-compatibility/CSM/Legacy mode.
Are you sure you want to continue anyway?
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your BIOS boot on sda (ATA CT480BX500SSD1) disk!
Please set your BIOS in Legacy mode in order to start your Ubuntu 22.04.3 LTS, then type command [sudo update-grub] in order to add the Windows entry to your GRUB menu.Dernière modification par LukePerp (Le 20/12/2023, à 17:25)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#2 Le 17/12/2023, à 12:20
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Bonjour.
Je pense à une initialisation du nvme. Le problème de lenteur continue-t-il?
Donne ce retour.
journalctl --no-pager -b -p errDernière modification par geole (Le 17/12/2023, à 12:27)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#3 Le 17/12/2023, à 12:59
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
geole a écrit :
Bonjour.
Je pense à une initialisation du nvme. Le problème de lenteur continue-t-il?Donne ce retour.
journalctl --no-pager -b -p err
Merci de ton aide. J'ai oublié de préciser que le nvme fonctionne correctement et son débit est conforme, une fois arrivée dans Ubuntu
$ journalctl --no-pager -b -p err
déc. 17 11:56:16 ACER-xk2308 kernel: x86/cpu: SGX disabled by BIOS.
déc. 17 11:56:16 ACER-xk2308 kernel: usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
déc. 17 11:56:17 ACER-xk2308 kernel: usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
déc. 17 11:56:17 ACER-xk2308 blkmapd[841]: open pipe file /run/rpc_pipefs/nfs/blocklayout failed: No such file or directory
déc. 17 11:56:18 ACER-xk2308 kernel: usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
déc. 17 11:56:19 ACER-xk2308 kernel: usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
déc. 17 11:56:19 ACER-xk2308 kernel: usb 1-1-port3: unable to enumerate USB device
déc. 17 11:56:25 ACER-xk2308 lightdm[2162]: gkr-pam: unable to locate daemon control file
déc. 17 11:56:45 ACER-xk2308 pulseaudio[2351]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#4 Le 17/12/2023, à 13:52
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Pour détailler plus
journalctl --no-pager --since "2023-12-17 11:56:25" --until "2023-12-17 11:59"Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 17/12/2023, à 15:36
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
geole a écrit :
Pour détailler plus
journalctl --no-pager --since "2023-12-17 11:56:25" --until "2023-12-17 11:59"
Le ralentissement est uniquement après le menu Grub jusqu'au login d'Ubuntu.
Sous Uubntu et Windows, le disque M2 / NVME fonctionne très bien et il n'y a pas de ralentissement.
Rechercher dans les journaux me semble être une piste différente.
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=JobRemoved cookie=612 reply_cookie=0 signature=uoss error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd[1]: systemd-journald.service: Received EPOLLHUP on stored fd 25 (stored), closing.
déc. 17 11:56:24 ACER-xk2308 systemd[1]: nfs-server.service: starting held back, waiting for: nfs-mountd.service
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/rpc_2dstatd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=613 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/rpc_2dstatd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=614 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd[1]: systemd-journald.service: Received EPOLLHUP on stored fd 24 (stored), closing.
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Received SIGCHLD from PID 2296 (rpc.mountd).
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Child 2296 (rpc.mountd) died (code=exited, status=0/SUCCESS)
déc. 17 11:56:24 ACER-xk2308 systemd[1]: nfs-mountd.service: Child 2296 belongs to nfs-mountd.service.
déc. 17 11:56:24 ACER-xk2308 systemd[1]: nfs-mountd.service: Control process exited, code=exited, status=0/SUCCESS (success)
déc. 17 11:56:24 ACER-xk2308 systemd[1]: nfs-mountd.service: Got final SIGCHLD for state start.
déc. 17 11:56:24 ACER-xk2308 systemd[1]: nfs-mountd.service: Main PID guessed: 2306
déc. 17 11:56:24 ACER-xk2308 systemd[1]: nfs-mountd.service: Changed start -> running
déc. 17 11:56:24 ACER-xk2308 systemd[1]: nfs-mountd.service: Job 163 nfs-mountd.service/start finished, result=done
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Started NFS Mount Daemon.
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=615 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=616 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=JobRemoved cookie=617 reply_cookie=0 signature=uoss error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=618 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=615 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=619 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=616 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=JobRemoved cookie=617 reply_cookie=0 signature=uoss error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=618 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:24 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dmountd_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=619 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: Failed to read pids.max attribute of cgroup root, ignoring: No data available
déc. 17 11:56:25 ACER-xk2308 systemd[1]: nfs-server.service: About to execute /usr/sbin/exportfs -r
déc. 17 11:56:25 ACER-xk2308 systemd[1]: nfs-server.service: Forked /usr/sbin/exportfs as 2309
déc. 17 11:56:25 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dserver_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=620 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dserver_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=621 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: nfs-server.service: Changed dead -> start-pre
déc. 17 11:56:25 ACER-xk2308 systemd[1]: Starting NFS server and services...
déc. 17 11:56:25 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dserver_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=622 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dserver_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=620 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dserver_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=623 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: Sent message type=signal sender=n/a destination=n/a path=/org/freedesktop/systemd1/job/162 interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=624 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: varlink: New incoming connection.
déc. 17 11:56:25 ACER-xk2308 systemd[1]: varlink: Connections of user 0: 0 (of 1024 max)
déc. 17 11:56:25 ACER-xk2308 systemd[1]: varlink-23: Setting state idle-server
déc. 17 11:56:25 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dserver_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=621 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: varlink-23: New incoming message: {"method":"io.systemd.UserDatabase.GetMemberships","parameters":{"userName":"kernoops","service":"io.systemd.DynamicUser"},"more":true}
déc. 17 11:56:25 ACER-xk2308 systemd[2309]: nfs-server.service: Executing: /usr/sbin/exportfs -r
déc. 17 11:56:25 ACER-xk2308 systemd-logind[1028]: Got message type=signal sender=:1.10 destination=n/a path=/org/freedesktop/systemd1/unit/nfs_2dserver_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=622 reply_cookie=0 signature=sa{sv}as error-name=n/a error-message=n/a
déc. 17 11:56:25 ACER-xk2308 systemd[1]: varlink-23: Changing state idle-server → processing-method-more
déc. 17 11:56:25 ACER-xk2308 systemd[1]: varlink-23: Sending message: {"error":"io.systemd.UserDatabase.NoRecordFound","parameters":{}}
déc. 17 11:56:25 ACER-xk2308 systemd[1]: varlink-23: Changing state processing-method-more → processed-methodDernière modification par LukePerp (Le 18/12/2023, à 18:42)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#6 Le 17/12/2023, à 16:23
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Tiens.... deux minutes sans messages
journalctl --no-pager --since "2023-12-17 11:56:56" --until "2023-12-17 12:10"Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 17/12/2023, à 19:28
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
geole a écrit :
Tiens.... deux minutes sans messages
journalctl --no-pager --since "2023-12-17 11:56:56" --until "2023-12-17 12:10"
Je ne comprends pas ce que tu cherches, si tu veux bien me dire. Je suis persuadé que ce n'est pas la bonne piste, pour les raisons suivantes :
L'apparition du menu grub est comme avant : rapide
Lors de la validation du choix de démarrer Ubuntu (au menu Grub), le process est figé pendant 1m et 25s, puis les lignes d'exécution apparaissent jusqu'à l'apparition du login 10s plus tard. Les logs ne montrent pas cette pause d'une minute 25s.
Je suis persuadé que c'est lié au Grub, sans doute un paramètre spécifique à ajouter pour NVME mais je n'ai pas trouvé.
Les journaux sont lourds : https://pastebin.com/P9FqBpsN
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#8 Le 17/12/2023, à 19:41
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
D après toi " le démarrage entre le menu Grub et le login d'Ubuntu dure 85 secondes, au lieu de 10s environ"
je cherche donc ce qui se passe dans ces 90 secondes.
J'avais supposé que c'était après cet instant
déc. 17 11:56:16 ACER-xk2308 kernel: x86/cpu: SGX disabled by BIOS.Si tu penses que c'est avant
journalctl --no-pager --since "2023-12-17 11:53" --until "2023-12-17 11:56:15"Dernière modification par geole (Le 17/12/2023, à 19:42)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#9 Le 17/12/2023, à 19:49
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
geole a écrit :
D après toi " le démarrage entre le menu Grub et le login d'Ubuntu dure 85 secondes, au lieu de 10s environ"
je cherche donc ce qui se passe dans ces 90 secondes.
J'avais supposé que c'était après cet instantdéc. 17 11:56:16 ACER-xk2308 kernel: x86/cpu: SGX disabled by BIOS.Si tu penses que c'est avant
journalctl --no-pager --since "2023-12-17 11:53" --until "2023-12-17 11:56:15"
Si je ne me trompe pas, le journal s'écrit au moment de valider le choix de démarrer Ubuntu au menu Grub. Or, cette validation est figé pendant une minute 25s puis seulement après je vois les lignes d'exécution apparaitre. Donc, je pense que le journal, comme les logs, ne montrent pas cette fichu pause.
Voici le journal actualisé : https://pastebin.com/xYxnpXsM
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#10 Le 17/12/2023, à 22:48
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Si je comprends bien ce que tu dis et ce que je vois dans la trace, il se passe 85 secondes avant que les premières lignes apparraisent à l'écran.
déc. 17 18:20:08 ACER-xk2308 kernel: microcode: microcode updated early to revision 0xf8, date = 2023-02-23
déc. 17 18:20:08 ACER-xk2308 kernel: Linux version 5.19.0-32-generic (buildd@lcy02-amd64-026) (x86_64-linux-gnu-gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #33~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Mon Jan 30 17:03:34 UTC 2 (Ubuntu 5.19.0-32.33~22.04.1-generic 5.19.17)
déc. 17 18:20:08 ACER-xk2308 kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-32-generic root=UUID=ee2f4425-cb03-4ffe-a80f-3cfb5ef81775 ro loglevel=3 nosplash debug loglevel=3lA tout hasard, mets le loglevel à 7 au lieu de 3
le nosplash n'est pas utile.
Comme le loglevel est indiqué deux fois, cela serait mieux que cela soit une fois afin d'éviter des valeurs contradictoires.
Dernière modification par geole (Le 17/12/2023, à 22:50)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#11 Le 18/12/2023, à 18:14
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Comme tu m'aide, c'est gênant de dire que je pense que c'est une mauvaise piste puisque le journal n'est créé qu'après la pause d'une minute 25s. Je vais essayer de faire une vidéo.
Grub modifié
$ cat /etc/default/grub
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=1
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="nosplash debug loglevel=7 amdgpu.ppfeaturemask=0xffffffff"
GRUB_DISABLE_OS_PROBER=true
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_GFXMODE=1280x720
GRUB_THEME=/boot/grub/themes/poly-dark/theme.txtJournal
$ journalctl --no-pager -b -p err
déc. 18 16:56:04 ACER-xk2308 kernel: x86/cpu: SGX disabled by BIOS.
déc. 18 16:56:04 ACER-xk2308 blkmapd[824]: open pipe file /run/rpc_pipefs/nfs/blocklayout failed: No such file or directory
déc. 18 16:56:12 ACER-xk2308 lightdm[2132]: gkr-pam: unable to locate daemon control file
déc. 18 16:56:32 ACER-xk2308 pulseaudio[2312]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)voir sur pastebin : https://pastebin.com/1ynqjbU5
------systemd-analyze time-------
Startup finished in 7.120s (kernel) + 8.257s (userspace) = 15.377s
graphical.target reached after 8.167s in userspaceDernière modification par LukePerp (Le 20/12/2023, à 17:19)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#12 Le 18/12/2023, à 19:30
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
J'ai fait une vidéo avec un chrono superposé
Vidéo
N'hésite pas à la télécharger et faire pause si besoin
J'ai accéléré la pause, qui fait une minute et 18s.
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#13 Le 18/12/2023, à 19:46
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Merci pour la vidéo.
Donc, malgré un log de trace maxima, la première ligne de trace n'est visible qu'après 85 secondes.
Que ce passe-t-il pendant ce temps? Mystère!
A mon avis, il attend que le nvme fabrique la table de correspondance entre les LBA de ubuntu et sa structure interne qui n'a pas été sauvée à l'arrêt. 2 To, C'est probablement long. Peux-tu lancer smarctl
sudo smartctl -s on -a /dev/nvme0n1sudo nvme error-log /dev/nvme0n1sudo nvme smart-log /dev/nvme0n1sudo nvme sanitize-log /dev/nvme0n1Dernière modification par geole (Le 18/12/2023, à 19:55)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#14 Le 18/12/2023, à 22:14
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
je ne connaissais pas la commande nvme, je viens de l'a découvrir cool
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-32-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Samsung SSD 980 PRO 2TB
Serial Number: S69ENF0WB25481Z
Firmware Version: 5B2QGXA7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 2000398934016 [2,00 TB]
Unallocated NVM Capacity: 0
Controller ID: 6
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 2000398934016 [2,00 TB]
Namespace 1 Utilization: 372709683200 [372 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 bb31b34591
Local Time is: Mon Dec 18 21:13:17 2023 CET
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 128 Pages
Warning Comp. Temp. Threshold: 82 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.49W - - 0 0 0 0 0 0
1 + 4.48W - - 1 1 1 1 0 200
2 + 3.18W - - 2 2 2 2 0 1000
3 - 0.0400W - - 3 3 3 3 2000 1200
4 - 0.0050W - - 4 4 4 4 500 9500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 37 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 1187166 [607 GB]
Data Units Written: 1470510 [752 GB]
Host Read Commands: 2855672
Host Write Commands: 1648241
Controller Busy Time: 11
Power Cycles: 8
Power On Hours: 4
Unsafe Shutdowns: 0
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 37 Celsius
Temperature Sensor 2: 43 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
Error Log Entries for device:nvme0n1 entries:64
.................
Entry[ 0]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 1]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 2]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 3]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 4]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 5]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 6]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 7]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 8]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 9]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[10]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[11]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[12]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[13]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[14]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[15]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[16]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[17]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[18]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[19]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[20]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[21]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[22]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[23]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[24]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[25]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[26]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[27]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[28]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[29]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[30]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[31]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[32]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[33]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[34]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[35]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[36]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[37]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[38]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[39]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[40]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[41]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[42]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[43]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[44]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[45]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[46]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[47]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[48]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[49]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[50]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[51]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[52]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[53]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[54]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[55]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[56]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[57]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[58]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[59]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[60]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[61]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[62]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[63]
.................
error_count : 0
sqid : 0
cmdid : 0
status_field : 0(SUCCESS: The command completed successfully)
phase_tag : 0
parm_err_loc : 0
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Smart Log for NVME device:nvme0n1 namespace-id:ffffffff
critical_warning : 0
temperature : 37 C (310 Kelvin)
available_spare : 100%
available_spare_threshold : 10%
percentage_used : 0%
endurance group critical warning summary: 0
data_units_read : 1187166
data_units_written : 1470510
host_read_commands : 2855672
host_write_commands : 1648241
controller_busy_time : 11
power_cycles : 8
power_on_hours : 4
unsafe_shutdowns : 0
media_errors : 0
num_err_log_entries : 0
Warning Temperature Time : 0
Critical Composite Temperature Time : 0
Temperature Sensor 1 : 37 C (310 Kelvin)
Temperature Sensor 2 : 43 C (316 Kelvin)
Thermal Management T1 Trans Count : 0
Thermal Management T2 Trans Count : 0
Thermal Management T1 Total Time : 0
Thermal Management T2 Total Time : 0
Sanitize Progress (SPROG) : 65535
Sanitize Status (SSTAT) : 0
Sanitize Command Dword 10 Information (SCDW10) : 0
Estimated Time For Overwrite : 4294967295 (No time period reported)
Estimated Time For Block Erase : 4294967295 (No time period reported)
Estimated Time For Crypto Erase : 4294967295 (No time period reported)
Estimated Time For Overwrite (No-Deallocate) : 0
Estimated Time For Block Erase (No-Deallocate) : 0
Estimated Time For Crypto Erase (No-Deallocate): 0Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#15 Le 18/12/2023, à 22:42
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Mauvaise piste. Mais tant mieux.
Unsafe Shutdowns: 0Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#16 Le 19/12/2023, à 17:17
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Comme expliqué, Ubuntu est installé sur un autre disque mais c'est le NVME qui ralentit le démarrage.
Pour comparer, j'a installé un second Ubuntu sur une partition du disque NVME. Son démarrage est très rapide, j'ai ajouté son rapport boot-info dans le post #1
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#17 Le 19/12/2023, à 18:14
- iznobe
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Bonjour , d ' apres le dernier boot info , voici ce que j' ai relevé qui peut potentiellement posé soucis :
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sda1 and looks at sector 43169248 of the same hard
drive for core.img, but core.img can not be found at
this location.
sdb5: __________________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sdb5 starts
at sector 4096. But according to the info from fdisk,
sdb5 starts at sector 16072.
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown BootLoader on sdb5
Perso la 1ere chose que je ferais , c ' est d ' installer un GRUB " propre " sur le NVME , d ' abord ca ira plus vite , et puis ca peut potentiellement eliminer certains soucis sans se fatiguer .
Il suffit d ' appliquer , apres verification , la reparation recommandée du boot-info .
Ca faisait un moment que je n' avais plus vu passer d ' install MSDOS / Legacy 
Il faudra ensuite configurer le BIOS pour qe ca demarre sur le NVME si c' est possible avec ta carte mere et ton BIOS .
Verifier alors le temps de demarrage .
Si le probleme persiste , il faudra alors faire des reparations de disques fsck et chkdsk selon les partitions afin que les erreurs ci-dessus disparraissent du boot-info .
Un disque dur , dont le moteur peine a demarrer peut aussi etre à l' origine de ce temps d' attente .
des rapports smart des HDD n ' est pas superflu .
une MAJ du BIOS si y en a une en rapport avec les NVME / M2 n ' est pas du luxe non plus . ca peut tres bien venir du BIOS / Carte Mere .
Dernière modification par iznobe (Le 19/12/2023, à 18:21)
retour COMPLET et utilisable de commande | script montage partitions
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#18 Le 19/12/2023, à 18:23
- iznobe
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
LukePerp a écrit :
Comme expliqué, Ubuntu est installé sur un autre disque mais c'est le NVME qui ralentit le démarrage.
Pour comparer, j'a installé un second Ubuntu sur une partition du disque NVME. Son démarrage est très rapide, j'ai ajouté son rapport boot-info dans le post #1
Alors là , excuse moi , mais ce que tu dis n' est pas clair du tout .
tu pretends que le disque NVME ralentit le demarrage d ' ubuntu sur le HDD .
Tu dis que le ubuntu installé sur le NVME demarre comme une fleche , faudrait savoir ...
on a pas la meme logique
Le probleme est peut etre apparu apres l' installation physique du NVME , mais ce n' est pas forcément lié .
Sans rien changer ( en rapport avec mon message precedent ) , tu pourrais faire un test simple : enlever le NVME physiquement et demarrer comme avant histoire de voir si c ' est bien le NVME qui ralentirait le(s) HDD .
Dernière modification par iznobe (Le 19/12/2023, à 18:26)
retour COMPLET et utilisable de commande | script montage partitions
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#19 Le 19/12/2023, à 18:36
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Bonsoir iznobe
Heureusement qu'il existe une vidéo qui démontre l'existence de ces 85 secondes d'attente
AJOUT
C'est entre le moment où on a sélectionné le grub à lancer et le moment où il commence son baratin de 30000 lignes de traces.
C'est le nouveau ubuntu installé dans le NVME qui démarre à 100 à l'heure.
C'est le ubuntu qui est installé dans SSD qui patine pendant 85 secondes depuis que le NVME lui fait de l'ombre.
Il y aurait la possibilité que cela soient des options du grub qui sont un peu différentes entre les deux ubuntu. Mais je n'y crois pas trop.
GRUB_CMDLINE_LINUX_DEFAULT=" amdgpu.ppfeaturemask=0xffffffff"
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_GFXMODE=1280x720
GRUB_THEME=/boot/grub/themes/poly-dark/theme.txtDernière modification par geole (Le 19/12/2023, à 19:08)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#20 Le 19/12/2023, à 18:38
- iznobe
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Salut geole , j ' ai écrit 2 messages , je ne sais pas si tu as vu le 1er , avec des choses " chelou " que j' ai mis en gras avec le dernier boot-info posté par lukeperp dans son 1er message .
Sinon oui , j ' ai compris le constat qu ' expose le demandeur , mais ca me parait assez peu probable , vu que le NVME demarre rapidement et que pour lui il n' y a pas de temps d' attente .
j ' ai aussi visionner la Vidéo posté en #1 , avec l' acceleration du temps d' attente . et j ' aurais tendance à dire que justement , il essaierai de trouver le bloc de boot sdb5 sans y parvenir ( d ' ou l' attente ) , à condition que le boot-info ne fournisse pas des choses erronées .
je proposais de " refaire " un nouveau GRUB positionné dans le NVME comme le suggere le boot-info , des fois que ... ca ne mange pas de pain de tester à condition que le BIOS prenne en charge cette fonction .
Dernière modification par iznobe (Le 19/12/2023, à 18:43)
retour COMPLET et utilisable de commande | script montage partitions
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#21 Le 19/12/2023, à 18:45
- iznobe
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
geole a écrit :
Il y aurait la possibilité que cela soient des options du grub qui sont un peu différentes entre les deux ubuntu. Mais je n'y crois pas trop
GRUB_CMDLINE_LINUX_DEFAULT=" amdgpu.ppfeaturemask=0xffffffff" GRUB_GFXPAYLOAD_LINUX=keep GRUB_GFXMODE=1280x720 GRUB_THEME=/boot/grub/themes/poly-dark/theme.txt
à propose de ces options , ca sent le grub-customizer ca non ?
est ce que le fichier du theme est toujours present ? ca pourrait potentiellement faire ralentir le GRUB peut etre ?
retour COMPLET et utilisable de commande | script montage partitions
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#22 Le 19/12/2023, à 19:01
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
iznobe : c'est système très personnalisé, incluant le grub. Je te propose de relire le premier post. Le ralentissement est apparu après l'ajout physique du nvme d'un système installé sur SSD sda1. Si je retire le NVME de la machine, Ubuntu redémarre vite. C'est très bizarre, j'ai l'habitude de dépanner depuis des années et je n'ai jamais vue cette situation et cette fois c'est moi la victime haha.
Aussi, j'ai testé sans le swapfile puisqu'il y a cette différence entre les deux boot info, mais meme problème ce n'est pas la cause.
Je rappel que le système démarre vite en retirant le nvme de la machine, donc les paramètres présents dans le grub ne sont pas la cause. Je n'ai pas d'autres pistes
Dernière modification par LukePerp (Le 19/12/2023, à 19:04)
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#23 Le 19/12/2023, à 19:19
- iznobe
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Dans ce cas , regarde avec attention le #17 ou j ' indique 2 3 choses .en fin de message , c ' est peut etre materiel .
retour COMPLET et utilisable de commande | script montage partitions
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#24 Le 19/12/2023, à 19:29
- LukePerp
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
iznobe a écrit :
Dans ce cas , regarde avec attention le #17 ou j ' indique 2 3 choses .en fin de message , c ' est peut etre materiel .
J'ai déjà fait le tour des vérifs du matériel. Ce n'est pas matériel. Le nvme est neuf. Le bios est bien configuré. Une install d'ubuntu sur le nvme donne un démarrage très rapide. Le nvme a été vérifié et est rapide dans l'ubuntu du sda. Ces perfs sont au rdv sous linux et windows De plus, qu'il soit formaté, vide, en MBR ou GPT, c'est pareil, le ralentissement est présent juste après la validation du choix au Grub. Ça me dépasse.
Gamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#25 Le 19/12/2023, à 19:33
- geole
Re : [Abandon] Démarrage lent après ajout M2 NVME mais qu'après Grub menu
Extraits du boot-info
=================== nvme0n1p2/boot/grub/grub.cfg (filtered) ====================
Ubuntu df912282-1e71-45f4-b725-e429d72d2b39
Ubuntu 22.04.3 LTS (22.04) (on sda1) ee2f4425-cb03-4ffe-a80f-3cfb5ef81775
Windows Recovery Environment (on sdb1) 062FDE8B0C7254F8
### END /etc/grub.d/30_os-prober ###Depuis le NVME, lorsque tu lances l'autre ubuntu qui est dans ls SSD SDA, attends-tu aussi 85 secondes?
Si ce n'est pas le cas, tu pourrais considérer que le contournement est bon et faire l'impasse sur la cause
car le contexte d'installer un nvme et ne pas l'utiliser pour y mettre les logiciels est exceptionnel.
Je soupçonne un bug dans le grub du style: "Le bios me dit qu il y a un nvme, donc je me repose un peu le temps de réfléchir...". A une époque, il y avait une option spéciale pour dire de temps de repos.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne