#1 Le 10/07/2023, à 16:12
- Henri56
transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Bonjour a tous , j'aimerais transférer Ubuntu 22.04 d'un ancien dd vers une partition de ssd . Je suis en dual boot win 10 / Ubuntu 22.04 , j'ai déja essayer avec un 18.04 mais je n'ai jamais réussi a configurer le grub donc cela n'a pas fonctionné . Voici mon boot info : https://paste.ubuntu.com/p/54qVDpRS8F/
pastebin
Paste from boot-info 10 July 2023 15:09 +0000
Syntax highlighting: bash
View raw
boot-info-4ppa200 [20230710_1709]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/nvme0n1 and looks at sector
2048 of the same hard drive for core.img. core.img is at this location and
looks for (,gpt2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
nvme0n1p2: _____________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
nvme0n1p2 and looks at sector 191646792 of the same
hard drive for core.img, but core.img can not be found
at this location.
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
nvme0n1p3: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
nvme0n1p4: _____________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/10/11/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/fbx64.efi /efi/Boot/grubx64.efi
/efi/ubuntu/fwupx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10 or 11
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/bkpbootx64.efi /efi/BOOT/bootx64.efi
/efi/BOOT/fbx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/bootmgr /boot/bcd
================================ 3 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 22.04.2 LTS CurrentSession on sdb2
OS#2: Ubuntu 18.04.6 LTS on nvme0n1p2
OS#3: Windows 10 or 11 on sda3
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: GP108 [GeForce GT 1030] Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller from NVIDIA Corporation Intel Corporation
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.15.0-76-generic root=UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 ro quiet splash vt.handoff=7
df -Th / : /dev/sdb2 ext4 292G 90G 188G 33% /
===================================== UEFI =====================================
BIOS/UEFI firmware: L01 v02.65(2.65) from Hewlett-Packard
The firmware is EFI-compatible, and is set in EFI-mode for this installed-session.
SecureBoot disabled - SecureBoot disabled - Veuillez indiquer ce message à boot.repair@gmail.com.
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0004,0001,0002,0003,000A,000C,0005,0006,0007,0009
Boot0000* ubuntu HD(1,GPT,07d12838-f492-47a9-b8da-b307ccc60fdf,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)
Boot0001* DTO UEFI USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* DTO UEFI USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0003* DTO UEFI ATAPI CD-ROM Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0300000001)..BO
Boot0004* Windows Boot Manager HD(1,GPT,e9b4c171-a67b-473c-844d-ca7d1b604fb6,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0005* DTO Legacy USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0006* Hard Drive BBS(HD,,0x0)..GO..NO?.........F.a.k.e. .U.s.b. .O.p.t.i.o.n.................BO..NO{.......+.S.A.T.A. . .P.M.:. .S.a.n.D.i.s.k. .S.D.7.S.B.3.Q.-.1.2.8.G.........................rN.D+..,.\...........BO..NO{.......+.S.A.T.A. . .P.M.:. .W.D.C. .W.D.3.2.0.0.B.E.K.X.-.7.5.B.7.W.........................rN.D+..,.\...........BO
Boot0007* IBA GE Slot 00C8 v1550 BBS(Network,,0x0)..BO
Boot0009* CD/DVD Drive BBS(CDROM,,0x0)..GO..NO{.......+.S.A.T.A. . .P.M.:. .h.p. . . . . . .D.V.D. .A. . .D.S.8.A.C.........................rN.D+..,.\...........BO
Boot000A* WDC WD3200BEKX-75B7WT0 PciRoot(0x0)/Pci(0x1f,0x2)/Sata(3,65535,0)/HD(1,GPT,07d12838-f492-47a9-b8da-b307ccc60fdf,0x800,0x100000)..BO
Boot000C* SanDisk SD7SB3Q-128G-1006 PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0,65535,0)/HD(1,GPT,e9b4c171-a67b-473c-844d-ca7d1b604fb6,0x800,0x32000)..BO
61f28521dad20467a8e92c65f405ff61 sdb1/BOOT/bkpbootx64.efi
5ddf997e8b025bfbc2009e85b32f60dc sdb1/BOOT/bootx64.efi
8b8cdc518f2c5bb2e9d875ff1b98721f sdb1/BOOT/fbx64.efi
5ddf997e8b025bfbc2009e85b32f60dc sdb1/ubuntu/grubx64.efi
f243a42f3bd3164872e792dbc2610270 sdb1/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95 sdb1/ubuntu/shimx64.efi
261d615bf3021028e8026792c63f2aab sda1/Boot/bkpbootx64.efi
61f28521dad20467a8e92c65f405ff61 sda1/Boot/bootx64.efi
5dabe049a4dad758d975dc2e60a7f00e sda1/Boot/fbx64.efi
43ff9f5ed17495c46afef40ab5a53e42 sda1/Boot/grubx64.efi
b5698f2f88c3917bdf0c9f0f2a45d469 sda1/ubuntu/fwupx64.efi
621356d82b109cd860ad92cdf241c58b sda1/ubuntu/grubx64.efi
f243a42f3bd3164872e792dbc2610270 sda1/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95 sda1/ubuntu/shimx64.efi
f2c9c5c28ef51a83d75db5d108b1a310 sda1/Microsoft/Boot/bootmgfw.efi
46288d3cb6a91cb97d25474930f95dfb sda1/Microsoft/Boot/bootmgr.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sdb : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
nvme0n1 : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sdb2 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p2 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda3 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p4 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
nvme0n1p2 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda3 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sdb2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
nvme0n1p3 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p2 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
sdb1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sda4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda3 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 1759318E-DCB4-4B59-BC80-9427D640A84B
Start End Sectors Size Type
nvme0n1p2 616181760 1128181759 512000000 244.1G Linux filesystem
nvme0n1p3 1128181760 1953523711 825341952 393.6G Linux filesystem
nvme0n1p4 6164480 616181759 610017280 290.9G Microsoft basic data
Partition table entries are not in disk order.
Disk sda: 119.24 GiB, 128035676160 bytes, 250069680 sectors
Disk identifier: 9EADD9A7-A013-414B-830C-4D0883EB4760
Start End Sectors Size Type
sda1 2048 206847 204800 100M EFI System
sda2 206848 239615 32768 16M Microsoft reserved
sda3 239616 248995169 248755554 118.6G Microsoft basic data
sda4 248995840 250066943 1071104 523M Windows recovery environment
Disk sdb: 298.09 GiB, 320072933376 bytes, 625142448 sectors
Disk identifier: 3CD568F6-7A3E-41CB-B31F-31797D32C9F5
Start End Sectors Size Type
sdb1 2048 1050623 1048576 512M EFI System
sdb2 1050624 625141759 624091136 297.6G Linux filesystem
parted -lm (filtered): _________________________________________________________
sda:128GB:scsi:512:4096:gpt:ATA SanDisk SD7SB3Q-:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:123MB:16.8MB::Microsoft reserved partition:msftres;
3:123MB:127GB:127GB:ntfs:Basic data partition:msftdata;
4:127GB:128GB:548MB:ntfs::hidden, diag;
sdb:320GB:scsi:512:512:gpt:ATA WDC WD3200BEKX-7:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:320GB:320GB:ext4::;
nvme0n1:1000GB:nvme:512:512:gpt:WDC WDS100T2B0C:;
4:3156MB:315GB:312GB:ntfs:Windows 10:hidden, msftdata;
2:315GB:578GB:262GB:ext4:Ubuntu 18.04.04:;
3:578GB:1000GB:423GB:ext4::;
Free space >10MiB: ______________________________________________________________
nvme0n1: 0.02MiB:3010MiB:3010MiB
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat 520E-296B e9b4c171-a67b-473c-844d-ca7d1b604fb6 EFI system partition
├─sda2 f3bdebb6-4441-4fa9-bdba-4b7111e21db4 Microsoft reserved partition
├─sda3 ntfs 8CA40F38A40F23F4 0ddd0552-64c7-4eb2-9933-2379f6244c8a Basic data partition
└─sda4 ntfs 567099EC7099D2DB 4b6cd196-2431-450c-8f87-c854dd9430d5
sdb
├─sdb1 vfat B0BB-2DA6 07d12838-f492-47a9-b8da-b307ccc60fdf EFI System Partition
└─sdb2 ext4 4c26c065-d62d-4568-b08a-92dc9622ff99 91000ed6-e6dc-4408-a52e-5d7574e0dad7
nvme0n1
├─nvme0n1p2 ext4 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 03429eea-6bd1-4694-be8d-0581a34d674b / Ubuntu 18.04.04
├─nvme0n1p3 ext4 e4daf880-091b-4cdb-855d-1fbba1c0e3d8 dd1f9f1f-9aa3-41d5-bb4b-01dd5d73e259
└─nvme0n1p4 ntfs 516240271FFB565D 74dd419d-15c5-4402-a0ea-ca318f32efbf Windows 10
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/nvme0n1p2 21.5G 86% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p3 366.6G 0% /mnt/boot-sav/nvme0n1p3
/dev/nvme0n1p4 127.7G 56% /media/henri/516240271FFB565D
/dev/sda1 65.3M 32% /mnt/boot-sav/sda1
/dev/sda3 64.5G 46% /media/sda3
/dev/sda4 88.6M 83% /media/sda4
/dev/sdb1 504.1M 1% /mnt/boot-sav/sdb1
/dev/sdb2 187.7G 31% /
/dev/sdb2[/usr/share/hunspell] 187.7G 31% /var/snap/firefox/common/host-hunspell
Mount options (filtered): ______________________________________________________
/dev/nvme0n1p2 ext4 rw,relatime,stripe=32738
/dev/nvme0n1p3 ext4 rw,relatime
/dev/nvme0n1p4 fuseblk ro,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda3 fuseblk ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda4 fuseblk ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdb1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sdb2 ext4 rw,relatime,errors=remount-ro
/dev/sdb2[/usr/share/hunspell] ext4 ro,noexec,noatime,errors=remount-ro
=================== nvme0n1p2/boot/grub/grub.cfg (filtered) ====================
Ubuntu d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-166-generic d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-163-generic d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-162-generic d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
======================== nvme0n1p2/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 / ext4 errors=remount-ro 0 1
==================== nvme0n1p2/etc/default/grub (filtered) =====================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false
================= nvme0n1p2: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
335.943946838 = 360.717066240 boot/grub/grub.cfg 1
441.943431854 = 474.533146624 boot/grub/i386-pc/core.img 1
405.990291595 = 435.928756224 boot/vmlinuz-4.15.0-162-generic 2
338.294982910 = 363.241472000 boot/vmlinuz-4.15.0-163-generic 1
406.005924225 = 435.945541632 boot/vmlinuz-4.15.0-166-generic 2
406.005924225 = 435.945541632 vmlinuz 2
338.294982910 = 363.241472000 vmlinuz.old 1
432.693355560 = 464.600952832 boot/initrd.img-4.15.0-162-generic 5
396.380775452 = 425.610616832 boot/initrd.img-4.15.0-163-generic 5
429.455284119 = 461.124100096 boot/initrd.img-4.15.0-166-generic 5
429.455284119 = 461.124100096 initrd.img 5
396.380775452 = 425.610616832 initrd.img.old 5
=================== nvme0n1p2: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 12808 Feb 24 2021 10_linux
-rwxr-xr-x 1 root root 11298 Feb 24 2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 Feb 24 2021 30_os-prober
-rwxr-xr-x 1 root root 1418 Feb 24 2021 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Feb 24 2021 40_custom
-rwxr-xr-x 1 root root 216 Feb 24 2021 41_custom
===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 47bf659a-335f-4fd1-9d14-d2fdc66aeb1a root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
===================== sdb1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 4c26c065-d62d-4568-b08a-92dc9622ff99 root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sdb2/boot/grub/grub.cfg (filtered) ======================
Ubuntu 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-76-generic 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-75-generic 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu 18.04.6 LTS (18.04) (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-166-generic (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-163-generic (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-162-generic (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Windows Boot Manager (on sda1) osprober-efi-520E-296B
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
Windows 10"{
========================== sdb2/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 / ext4 errors=remount-ro 0 1
UUID=B0BB-2DA6 /boot/efi vfat defaults 0 1
UUID=516240271FFB565D /media/henri/516240271FFB565D ntfs-3g defaults,nodev,nosuid,locale=fr_BE.UTF-8 0 0
UUID=8CA40F38A40F23F4 /media/sda3 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
UUID=567099EC7099D2DB /media/sda4 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
/swapfile none swap sw 0 0
======================= sdb2/etc/default/grub (filtered) =======================
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false
==================== sdb2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
28.155849457 = 30.232113152 boot/grub/grub.cfg 1
102.066455841 = 109.593022464 boot/vmlinuz 1
115.675830841 = 124.205977600 boot/vmlinuz-5.15.0-75-generic 1
102.066455841 = 109.593022464 boot/vmlinuz-5.15.0-76-generic 1
115.675830841 = 124.205977600 boot/vmlinuz.old 1
76.867652893 = 82.536013824 boot/initrd.img 7
110.243160248 = 118.372691968 boot/initrd.img-5.15.0-75-generic 5
76.867652893 = 82.536013824 boot/initrd.img-5.15.0-76-generic 7
110.243160248 = 118.372691968 boot/initrd.img.old 5
===================== sdb2: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18683 Apr 15 2022 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Apr 15 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Feb 21 2022 35_fwupd
-rwxr-xr-x 1 root root 349 Jan 24 2022 40_custom
-rwxr-xr-x 1 root root 215 Apr 15 2022 41_custom
drwxr-xr-x 4 root root 4096 Jan 24 2022 backup
=========================== sdb2/etc/grub.d/35_fwupd ===========================
#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
. /var/lib/fwupd/uefi_capsule.conf
if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
${grub_probe:?}
prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
chainloader ${EFI_PATH}
}
EOF
fi
fi
========================== sdb2/etc/grub.d/40_custom ===========================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10"{
set root='(hd3,1)'
search --no-floppy --fs-uuid --set B0BB-2DA6
drivemap -s (hd0) ${root}
chainloader +1
}
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub-efi of
nvme0n1p2,
using the following options: sdb1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups
Blockers in case of suggested repair: __________________________________________
Please use this software in a live-session (live-CD or live-USB). This will enable this feature.
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Ubuntu 18.04.6 LTS entry (sdb1/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)
New paste
Poster:
Your name (30 characters max)
Syntax:
Expiration:
Approximate and not guaranteed
Content:
© 2023 Canonical Ltd. Ubuntu and Canonical are registered trademarks of Canonical Ltd.
Legal info
Go to the top of the pageDernière modification par Henri56 (Le 14/07/2023, à 14:49)
Hors ligne
#2 Le 11/07/2023, à 12:41
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Bonjour
Je n'ai pas bien compris ce que tu veux faire.
OS#1: L'OS actuellement utilisé - Ubuntu 22.04.2 LTS CurrentSession on sdb2
OS#2: Ubuntu 18.04.6 LTS on nvme0n1p2Est-ce déplacer le ubuntu de SDB2 ou un autre?
Est-ce pour le mettre à la place de ubuntu18.04 ou à coté?
Quoique il en soit, il faut faire cette démarche:
1) Booter avec un support d'installation, choisir d'essayer ubuntu et lancer GPARTED
Disk nvme0n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Start End Sectors Size Type
nvme0n1p2 616181760 1128181759 512000000 244.1G Linux filesystem
nvme0n1p3 1128181760 1953523711 825341952 393.6G Linux filesystem
nvme0n1p4 6164480 616181759 610017280 290.9G Microsoft basic data2) Se positionner au début du nvme et créer une partition de boot: Caractèristiques. Taille 36 Mo, formatée en FAT32 et lui ajouter le drapeau ESP.
3) Se positionner sur la partition ubuntu que tu veux déplacer,
4) Eventuellement, la rétrécir pour qu'elle ne fasse pas plus que 244.1 Go ou 393.6 Go ( Elle peut faire moins).
5) Faire un copier
6) Faire un coller qui durera un certain temps.
7) Eventuellement, Agrandir la partition copiée pour qu'elle occuper la totalité de l'espace de la partition.
8) Modifier le UUID de cette partition pour en générer un autre aléatoire.
9) Demander a gparted, l 'affichage de cet UUID et en faire un copier
10) Quitter gparted et monter la partition réceptrice afin de modifier son fichier fstab (éventuellement remplacer le 2 par un 3 )
sudo mount -v /dev/nvme0n1p2 /mnt
sudo nano /mnt/etc/fstab et remplacer UUID décrivant la partition racine par le nouvel UUID généré. Puis sauver la modification (Ctrl o) et quitter ( Ctrl x)
La ligne à remplacer ressemble à cela
# / was on /dev/sda4 during installation
UUID=f993d09f-322e-4596-8322-f8216c77c802 / ext4 errors=remount-ro 0 1Puis démonter
sudo umount -v /mnt11) Lancer boot-repair. Prendre le mode "réparation avancée" et lui dire de réparer le logiciel du nvme en lui précisant d'utiliser la partition EFI du nvme.
Dernière modification par geole (Le 11/07/2023, à 12:48)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#3 Le 11/07/2023, à 13:10
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Merci pour ta réponse geole , si je parviens a déplacer le 22.04 et booter dessus je supprimerai 18.04 , je le garde plus comme sauvegarde que comme OS , j'essaierai ce que tu me conseille ce soir car la je dois partir a l’hôpital .
A+ Henri
Hors ligne
#4 Le 12/07/2023, à 10:40
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
alors la je cale dans le fstab voici les lignes que j ai dedans
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
#Entry for /dev/sdb2 :
UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 / ext4 errors=remount-ro 0 1
#Entry for /dev/sdb1 :
UUID=B0BB-2DA6 /boot/efi vfat defaults 0 1
#Entry for /dev/nvme0n1p4 :
UUID=516240271FFB565D /media/henri/516240271FFB565D ntfs-3g defaults,nodev,nosuid,locale=fr_BE.UTF-8 0 0
#Entry for /dev/sda3 :
UUID=8CA40F38A40F23F4 /media/sda3 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
#Entry for /dev/sda4 :
UUID=567099EC7099D2DB /media/sda4 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
/swapfile none swap sw 0 0
#UUID=B0BB-2DA6 /boot/efi vfat umask=0077 0 1
#UUID=B0BB-2DA6 /boot/efi vfat defaults 0 1
#UUID=B0BB-2DA6 /boot/efi vfat defaults 0 1je ne sais pas lequel je dois remplacer
a+
Hors ligne
#5 Le 12/07/2023, à 10:47
- iznobe
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
geole a écrit :
Bonjour
Je n'ai pas bien compris ce que tu veux faire.
Bonjour , moi non plus , meme maintenant .
Pourquoi faudrait il remplacer des lignes dans le fstab , dans quel but ? ou est il placé ce fstab que tu veux modifier ?
qu ' as tu fais entre temps ?
Dernière modification par iznobe (Le 12/07/2023, à 10:48)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#6 Le 12/07/2023, à 10:50
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
j essaie de transferer mon 22.04 sur le nvme et pouvoir bouter dessus et la je cale parce que je ne sais pas quel uuid je dois changer dans le fstab
Hors ligne
#7 Le 12/07/2023, à 10:57
- iznobe
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
t ' es plutot avare en explication . on ne sait pas ce que tu as fait entre temps , tu ne nous l' as pas ecris et on ne peut pas deviner ...
je suppose donc , tu n ' hesite pas a dire si j ' ai faux , que tu as installé ubuntu 22.04 LTS sur le disque SSD et qu ' il ne demarre pas ?
ou tu as copier la partition systeme de ton ubuntu 22.04 dejà installé sur l' ancien disque sur le nouveau SSD ?
Dernière modification par iznobe (Le 12/07/2023, à 10:59)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#8 Le 12/07/2023, à 11:02
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 / ext4 errors=remount-ro 0 1
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#9 Le 12/07/2023, à 11:07
- iznobe
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
ba , je vois pas pourquoi il faudrait remplacer cet UUID , si c ' est une copie de partition via gparted de la partition systeme d ' ubuntu 22.04 sdb2 vers une partition du nvme .
mais comme on ne sait pas ce qui a été fait avant , impossible de dire quoi faire ...
Dernière modification par iznobe (Le 12/07/2023, à 11:08)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#10 Le 12/07/2023, à 11:22
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Bonjour iznobe
Si le UUID de la duplication n'est pas modifié , on a deux UUID identiques.
Merci d'expliquer la règle pour choisir le bon. On pouvait aussi choisir que le montage se fasse par les labels, mais il n'en faut pas deux identiques. On pouvait aussi choisir le nom de la partition (/dev/nvme0n1p3 ?) On pouvait aussi choisir de modifier le UUID émetteur mais du coup, il n'aurait plus fonctionné correctement.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#11 Le 12/07/2023, à 11:34
- iznobe
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
ba comme y a toujours la 18.04 , il suffit de supprimer la partition sdb2 . si elle a bien été dupliquer via gparted .
Mais comme on ne sait toujours pas .
Dernière modification par iznobe (Le 12/07/2023, à 11:35)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#12 Le 12/07/2023, à 11:59
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Supprimer SDB2 avant d'avoir vérifié que sa duplication fonctionne, me vient pas à l'esprit. De plus, Henri56 souhaite peut-être la conserver comme sécurité. Il a indiqué vouloir supprimer la version 18.04 qui n'est plus maintenue.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#13 Le 12/07/2023, à 12:01
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Voici ce que j ai fais
for;ater la partition nvmeon1p2 en ext4
copier colle 22.04 dans ce nvmeon1p2
changer le uuid de cette partition
maintenant j essaie de changer le uuid dans fstab mais il refuse pas la permission
Hors ligne
#14 Le 12/07/2023, à 12:04
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
As-tu bien mis le mot sudo devant la commande pour ouvrir le fichier?
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#15 Le 12/07/2023, à 12:07
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
oui mais fstab ne s ouvre pas en ligne de commande
Hors ligne
#16 Le 12/07/2023, à 12:10
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Afin de visualiser le problème, donne ta commande de montage et son retour. idem pour la commande nano
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#17 Le 12/07/2023, à 12:12
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
ok j y suis arrive
Hors ligne
#18 Le 12/07/2023, à 14:11
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
bon nouveau probleme dans boot-repair
The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode.Hors ligne
#19 Le 12/07/2023, à 15:00
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
bon ben comme d'habitude , il lance toujours le 22.04 qui est sur mon ancien disque dur et non celui qui est sur le nvme , voici le boot info :
pastebin
Paste from boot-info 12 July 2023 13:56 +0000
Syntax highlighting: bash
View raw
boot-info-4ppa200 [20230712_1555]
============================== Boot Info Summary ===============================
=> Grub2 (v1.99-2.00) is installed in the MBR of /dev/nvme0n1 and looks at
sector 2048 of the same hard drive for core.img, but core.img can not be
found at this location.
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
nvme0n1p1: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/bkpbootx64.efi /efi/BOOT/bootx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/grub.cfg
nvme0n1p2: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/bootmgr /boot/bcd
nvme0n1p3: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
nvme0n1p4: _____________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/10/11/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/fbx64.efi /efi/Boot/grubx64.efi
/efi/ubuntu/fwupx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10 or 11
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/bkpbootx64.efi /efi/BOOT/bootx64.efi
/efi/BOOT/fbx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/bootmgr /boot/bcd
================================ 3 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 22.04.2 LTS CurrentSession on sdb2
OS#2: Ubuntu 22.04.2 LTS (boot) on nvme0n1p2
OS#3: Windows 10 or 11 on sda3
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: GP108 [GeForce GT 1030] Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller from NVIDIA Corporation Intel Corporation
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.15.0-76-generic root=UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 ro quiet splash vt.handoff=7
df -Th / : /dev/sdb2 ext4 234G 90G 132G 41% /
===================================== UEFI =====================================
BIOS/UEFI firmware: L01 v02.65(2.65) from Hewlett-Packard
The firmware is EFI-compatible, and is set in EFI-mode for this installed-session.
SecureBoot disabled - SecureBoot disabled - Veuillez indiquer ce message à boot.repair@gmail.com.
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0004,0001,0002,0003,000A,000C,0005,0006,0007,0009
Boot0000* ubuntu HD(1,GPT,07d12838-f492-47a9-b8da-b307ccc60fdf,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)
Boot0001* DTO UEFI USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* DTO UEFI USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0003* DTO UEFI ATAPI CD-ROM Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0300000001)..BO
Boot0004* Windows Boot Manager HD(1,GPT,e9b4c171-a67b-473c-844d-ca7d1b604fb6,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0005* DTO Legacy USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0006* Hard Drive BBS(HD,,0x0)..GO..NO?.........F.a.k.e. .U.s.b. .O.p.t.i.o.n.................BO..NO{.......+.S.A.T.A. . .P.M.:. .S.a.n.D.i.s.k. .S.D.7.S.B.3.Q.-.1.2.8.G.........................rN.D+..,.\...........BO..NO{.......+.S.A.T.A. . .P.M.:. .W.D.C. .W.D.3.2.0.0.B.E.K.X.-.7.5.B.7.W.........................rN.D+..,.\...........BO
Boot0007* IBA GE Slot 00C8 v1550 BBS(Network,,0x0)..BO
Boot0009* CD/DVD Drive BBS(CDROM,,0x0)..GO..NO{.......+.S.A.T.A. . .P.M.:. .h.p. . . . . . .D.V.D. .A. . .D.S.8.A.C.........................rN.D+..,.\...........BO
Boot000A* WDC WD3200BEKX-75B7WT0 PciRoot(0x0)/Pci(0x1f,0x2)/Sata(3,65535,0)/HD(1,GPT,07d12838-f492-47a9-b8da-b307ccc60fdf,0x800,0x100000)..BO
Boot000C* SanDisk SD7SB3Q-128G-1006 PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0,65535,0)/HD(1,GPT,e9b4c171-a67b-473c-844d-ca7d1b604fb6,0x800,0x32000)..BO
5ddf997e8b025bfbc2009e85b32f60dc nvme0n1p1/BOOT/bkpbootx64.efi
5ddf997e8b025bfbc2009e85b32f60dc nvme0n1p1/BOOT/bootx64.efi
5ddf997e8b025bfbc2009e85b32f60dc nvme0n1p1/ubuntu/grubx64.efi
ae8af199ef80311f9cee9de104a15496 nvme0n1p2/boot/bootx64.efi
1309af23db7b4cdd16bb29b41d6975e5 nvme0n1p2/microsoft/boot/cdboot.efi
ba914e4bb811a1b27220f020d2672167 nvme0n1p2/microsoft/boot/cdboot_noprompt.efi
261d615bf3021028e8026792c63f2aab sda1/Boot/bkpbootx64.efi
5ddf997e8b025bfbc2009e85b32f60dc sda1/Boot/bootx64.efi
5dabe049a4dad758d975dc2e60a7f00e sda1/Boot/fbx64.efi
43ff9f5ed17495c46afef40ab5a53e42 sda1/Boot/grubx64.efi
b5698f2f88c3917bdf0c9f0f2a45d469 sda1/ubuntu/fwupx64.efi
621356d82b109cd860ad92cdf241c58b sda1/ubuntu/grubx64.efi
f243a42f3bd3164872e792dbc2610270 sda1/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95 sda1/ubuntu/shimx64.efi
f2c9c5c28ef51a83d75db5d108b1a310 sda1/Microsoft/Boot/bootmgfw.efi
46288d3cb6a91cb97d25474930f95dfb sda1/Microsoft/Boot/bootmgr.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sdb : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
nvme0n1 : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sdb2 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
nvme0n1p4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p2 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda3 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p4 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
nvme0n1p2 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot
sdb1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda3 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sdb2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
nvme0n1p3 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p2 : not--sepboot, no---boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
sdb1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sda4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda3 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 1759318E-DCB4-4B59-BC80-9427D640A84B
Start End Sectors Size Type
nvme0n1p1 2048 75775 73728 36M EFI System
nvme0n1p2 616181760 1128181759 512000000 244.1G Linux filesystem
nvme0n1p3 1128181760 1953523711 825341952 393.6G Linux filesystem
nvme0n1p4 6164480 616181759 610017280 290.9G Microsoft basic data
Partition table entries are not in disk order.
Disk sda: 119.24 GiB, 128035676160 bytes, 250069680 sectors
Disk identifier: 9EADD9A7-A013-414B-830C-4D0883EB4760
Start End Sectors Size Type
sda1 2048 206847 204800 100M EFI System
sda2 206848 239615 32768 16M Microsoft reserved
sda3 239616 248995169 248755554 118.6G Microsoft basic data
sda4 248995840 250066943 1071104 523M Windows recovery environment
Disk sdb: 298.09 GiB, 320072933376 bytes, 625142448 sectors
Disk identifier: 3CD568F6-7A3E-41CB-B31F-31797D32C9F5
Start End Sectors Size Type
sdb1 2048 1050623 1048576 512M EFI System
sdb2 1050624 500967423 499916800 238.4G Linux filesystem
parted -lm (filtered): _________________________________________________________
sda:128GB:scsi:512:4096:gpt:ATA SanDisk SD7SB3Q-:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:123MB:16.8MB::Microsoft reserved partition:msftres;
3:123MB:127GB:127GB:ntfs:Basic data partition:msftdata;
4:127GB:128GB:548MB:ntfs::hidden, diag;
sdb:320GB:scsi:512:512:gpt:ATA WDC WD3200BEKX-7:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:256GB:256GB:ext4::;
nvme0n1:1000GB:nvme:512:512:gpt:WDC WDS100T2B0C:;
1:1049kB:38.8MB:37.7MB:fat32::boot, esp;
4:3156MB:315GB:312GB:ntfs:Windows 10:hidden, msftdata;
2:315GB:578GB:262GB:ext4::;
3:578GB:1000GB:423GB:ext4::;
Free space >10MiB: ______________________________________________________________
nvme0n1: 37.0MiB:3010MiB:2973MiB
sdb: 244613MiB:305245MiB:60632MiB
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat 520E-296B e9b4c171-a67b-473c-844d-ca7d1b604fb6 EFI system partition
├─sda2 f3bdebb6-4441-4fa9-bdba-4b7111e21db4 Microsoft reserved partition
├─sda3 ntfs 8CA40F38A40F23F4 0ddd0552-64c7-4eb2-9933-2379f6244c8a Basic data partition
└─sda4 ntfs 567099EC7099D2DB 4b6cd196-2431-450c-8f87-c854dd9430d5
sdb
├─sdb1 vfat B0BB-2DA6 07d12838-f492-47a9-b8da-b307ccc60fdf EFI System Partition
└─sdb2 ext4 4c26c065-d62d-4568-b08a-92dc9622ff99 91000ed6-e6dc-4408-a52e-5d7574e0dad7
nvme0n1
├─nvme0n1p1 vfat 72D3-CD14 bbc2ef27-4d66-4355-ac04-7bf61f624775 ESP
├─nvme0n1p2 ext4 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8 7a1056d9-9070-45d8-a883-4aa49324d6d6
├─nvme0n1p3 ext4 e4daf880-091b-4cdb-855d-1fbba1c0e3d8 dd1f9f1f-9aa3-41d5-bb4b-01dd5d73e259
└─nvme0n1p4 ntfs 516240271FFB565D 74dd419d-15c5-4402-a0ea-ca318f32efbf Windows 10
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/nvme0n1p1 28M 21% /mnt/boot-sav/nvme0n1p1
/dev/nvme0n1p2 138.2G 37% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p3 366.6G 0% /mnt/boot-sav/nvme0n1p3
/dev/nvme0n1p4 127.7G 56% /media/henri/516240271FFB565D
/dev/sda1 63M 34% /mnt/boot-sav/sda1
/dev/sda3 61.9G 48% /media/sda3
/dev/sda4 88.6M 83% /media/sda4
/dev/sdb2 132G 38% /
/dev/sdb2[/usr/share/hunspell] 132G 38% /var/snap/firefox/common/host-hunspell
Mount options (filtered): ______________________________________________________
/dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/nvme0n1p2 ext4 rw,relatime
/dev/nvme0n1p3 ext4 rw,relatime
/dev/nvme0n1p4 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda3 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda4 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdb2 ext4 rw,relatime,errors=remount-ro
/dev/sdb2[/usr/share/hunspell] ext4 ro,noexec,noatime,errors=remount-ro
=================== nvme0n1p1/efi/ubuntu/grub.cfg (filtered) ===================
search.fs_uuid 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8 root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
=================== nvme0n1p2/boot/grub/grub.cfg (filtered) ====================
Ubuntu 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8
Ubuntu, with Linux 5.15.0-76-generic 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8
Windows Boot Manager (on sda1) osprober-efi-520E-296B
Ubuntu 22.04.2 LTS (22.04) (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-76-generic (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-75-generic (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
Windows 10"{
======================== nvme0n1p2/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8 / ext4 errors=remount-ro 0 1
UUID=516240271FFB565D /media/henri/516240271FFB565D ntfs-3g defaults,nodev,nosuid,locale=fr_BE.UTF-8 0 0
UUID=8CA40F38A40F23F4 /media/sda3 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
UUID=567099EC7099D2DB /media/sda4 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
/swapfile none swap sw 0 0
UUID=72D3-CD14 /boot/efi vfat defaults 0 1
==================== nvme0n1p2/etc/default/grub (filtered) =====================
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false
================= nvme0n1p2: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
461.943401337 = 496.007950336 boot/grub/grub.cfg 1
467.297901154 = 501.757300736 boot/vmlinuz 1
467.297901154 = 501.757300736 boot/vmlinuz-5.15.0-76-generic 1
467.297901154 = 501.757300736 boot/vmlinuz.old 1
469.341285706 = 503.951368192 boot/initrd.img 2
469.341285706 = 503.951368192 boot/initrd.img-5.15.0-76-generic 2
469.341285706 = 503.951368192 boot/initrd.img.old 2
=================== nvme0n1p2: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 18683 Apr 15 2022 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Apr 15 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Feb 21 2022 35_fwupd
-rwxr-xr-x 1 root root 349 Jan 24 2022 40_custom
-rwxr-xr-x 1 root root 215 Apr 15 2022 41_custom
drwxr-xr-x 4 root root 4096 Jan 24 2022 backup
======================== nvme0n1p2/etc/grub.d/35_fwupd =========================
#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
. /var/lib/fwupd/uefi_capsule.conf
if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
${grub_probe:?}
prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
chainloader ${EFI_PATH}
}
EOF
fi
fi
======================== nvme0n1p2/etc/grub.d/40_custom ========================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10"{
set root='(hd3,1)'
search --no-floppy --fs-uuid --set B0BB-2DA6
drivemap -s (hd0) ${root}
chainloader +1
}
===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 47bf659a-335f-4fd1-9d14-d2fdc66aeb1a root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
===================== sdb1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 4c26c065-d62d-4568-b08a-92dc9622ff99 root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sdb2/boot/grub/grub.cfg (filtered) ======================
Ubuntu 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-76-generic 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-75-generic 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu 18.04.6 LTS (18.04) (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-166-generic (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-163-generic (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, with Linux 4.15.0-162-generic (on nvme0n1p2) d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Windows Boot Manager (on sda1) osprober-efi-520E-296B
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
Windows 10"{
========================== sdb2/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 / ext4 errors=remount-ro 0 1
UUID=B0BB-2DA6 /boot/efi vfat defaults 0 1
UUID=516240271FFB565D /media/henri/516240271FFB565D ntfs-3g defaults,nodev,nosuid,locale=fr_BE.UTF-8 0 0
UUID=8CA40F38A40F23F4 /media/sda3 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
UUID=567099EC7099D2DB /media/sda4 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
/swapfile none swap sw 0 0
======================= sdb2/etc/default/grub (filtered) =======================
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false
==================== sdb2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
168.626033783 = 181.060825088 boot/grub/grub.cfg 1
102.066455841 = 109.593022464 boot/vmlinuz 1
115.675830841 = 124.205977600 boot/vmlinuz-5.15.0-75-generic 1
102.066455841 = 109.593022464 boot/vmlinuz-5.15.0-76-generic 1
115.675830841 = 124.205977600 boot/vmlinuz.old 1
76.867652893 = 82.536013824 boot/initrd.img 7
110.243160248 = 118.372691968 boot/initrd.img-5.15.0-75-generic 5
76.867652893 = 82.536013824 boot/initrd.img-5.15.0-76-generic 7
110.243160248 = 118.372691968 boot/initrd.img.old 5
===================== sdb2: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18683 Apr 15 2022 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Apr 15 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Feb 21 2022 35_fwupd
-rwxr-xr-x 1 root root 349 Jan 24 2022 40_custom
-rwxr-xr-x 1 root root 215 Apr 15 2022 41_custom
drwxr-xr-x 4 root root 4096 Jan 24 2022 backup
=========================== sdb2/etc/grub.d/35_fwupd ===========================
#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
. /var/lib/fwupd/uefi_capsule.conf
if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
${grub_probe:?}
prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
chainloader ${EFI_PATH}
}
EOF
fi
fi
========================== sdb2/etc/grub.d/40_custom ===========================
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10"{
set root='(hd3,1)'
search --no-floppy --fs-uuid --set B0BB-2DA6
drivemap -s (hd0) ${root}
chainloader +1
}
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi of
nvme0n1p2,
using the following options: kernel-purge nvme0n1p1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups
Blockers in case of suggested repair: __________________________________________
Please use this software in a live-session (live-CD or live-USB). This will enable this feature.
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Ubuntu 22.04.2 LTS (boot) entry (nvme0n1p1/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)
New paste
Poster:
Your name (30 characters max)
Syntax:
Expiration:
Approximate and not guaranteed
Content:
© 2023 Canonical Ltd. Ubuntu and Canonical are registered trademarks of Canonical Ltd.
Legal info
Go to the top of the pagea+
Hors ligne
#20 Le 12/07/2023, à 16:59
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Choix A) Avec boot-repair
Il faut que tu ailles dans le bios et que tu le règles pour choisir de fichier de boot EFI de la clé USB au lieu du fichier de boot LEGACY ou que tu lui dises que le boot EFI sur support USB est prioritaire
Choix B) Avec le UBUNTU installé sur le disque dur
Faire découvrir le ubuntu du NVME
sudo update-grub Puis rebooter. Normalement tu dois avoir une grille te proposant le choix.
Tu choisis le ubuntu NVME et dans ce UBUNTU NVME
je mémorise cela
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
├─sda1 vfat 520E-296B e9b4c171-a67b-473c-844d-ca7d1b604fb6 EFI system partition
├─sdb1 vfat B0BB-2DA6 07d12838-f492-47a9-b8da-b307ccc60fdf EFI System Partition
├─nvme0n1p1 vfat 72D3-CD14 bbc2ef27-4d66-4355-ac04-7bf61f624775 ESPTu définiras la partition de boot EFI qui est absente avec cette commande
echo UUID=72D3-CD14 /boot/efi vfat defaults 0 1 | sudo tee -a /etc/fstabpuis installation du grub
sudo grub-installet mise à jour
sudo update-grubDernière modification par geole (Le 12/07/2023, à 17:11)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#21 Le 13/07/2023, à 07:21
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Tout d'abord merci pour votre aide , ce forum est génial .
J'ai réussi a mettre le nvme dans le grub avec boot-repair mais le démarrage s’arrête après quelques lignes , juste après une ligne qui dit : failed a propos du swap mais j'avais déjà ça avant avec l'ancien dd mais lui se lançait quand même donc je ne suis pas beaucoup plus avancé .
Une idée ?
Dernière modification par Henri56 (Le 13/07/2023, à 07:22)
Hors ligne
#22 Le 13/07/2023, à 07:25
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
voici le boot info
pastebin
Paste from boot-info 13 July 2023 6:24 +0000
Syntax highlighting: bash
View raw
boot-info-4ppa200 [20230713_0823]
============================== Boot Info Summary ===============================
=> Grub2 (v1.99-2.00) is installed in the MBR of /dev/nvme0n1 and looks at
sector 2048 of the same hard drive for core.img, but core.img can not be
found at this location.
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
nvme0n1p1: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/bkpbootx64.efi /efi/BOOT/bootx64.efi
/efi/BOOT/fbx64.efi /efi/BOOT/grubx64.efi
/efi/BOOT/mmx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg
nvme0n1p2: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/bootmgr /boot/bcd
nvme0n1p3: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
nvme0n1p4: _____________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/10/11/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/fbx64.efi /efi/Boot/grubx64.efi
/efi/ubuntu/fwupx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10 or 11
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/bkpbootx64.efi /efi/BOOT/bootx64.efi
/efi/BOOT/fbx64.efi /efi/BOOT/grubx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/bootmgr /boot/bcd
================================ 3 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 22.04.2 LTS CurrentSession on sdb2
OS#2: Ubuntu 22.04.2 LTS (boot) on nvme0n1p2
OS#3: Windows 10 or 11 on sda3
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: GP108 [GeForce GT 1030] Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller from NVIDIA Corporation Intel Corporation
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.15.0-76-generic root=UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 ro quiet splash
df -Th / : /dev/sdb2 ext4 234G 90G 132G 41% /
===================================== UEFI =====================================
BIOS/UEFI firmware: L01 v02.65(2.65) from Hewlett-Packard
The firmware is EFI-compatible, and is set in EFI-mode for this installed-session.
SecureBoot disabled - SecureBoot disabled - Veuillez indiquer ce message à boot.repair@gmail.com.
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0004,0001,0002,0003,000A,000C,0005,0006,0007,0009
Boot0000* ubuntu HD(1,GPT,07d12838-f492-47a9-b8da-b307ccc60fdf,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)
Boot0001* DTO UEFI USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* DTO UEFI USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0003* DTO UEFI ATAPI CD-ROM Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0300000001)..BO
Boot0004* Windows Boot Manager HD(1,GPT,e9b4c171-a67b-473c-844d-ca7d1b604fb6,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0005* DTO Legacy USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0006* Hard Drive BBS(HD,,0x0)..GO..NO?.........F.a.k.e. .U.s.b. .O.p.t.i.o.n.................BO..NO{.......+.S.A.T.A. . .P.M.:. .S.a.n.D.i.s.k. .S.D.7.S.B.3.Q.-.1.2.8.G.........................rN.D+..,.\...........BO..NO{.......+.S.A.T.A. . .P.M.:. .W.D.C. .W.D.3.2.0.0.B.E.K.X.-.7.5.B.7.W.........................rN.D+..,.\...........BO
Boot0007* IBA GE Slot 00C8 v1550 BBS(Network,,0x0)..BO
Boot0009* CD/DVD Drive BBS(CDROM,,0x0)..GO..NO{.......+.S.A.T.A. . .P.M.:. .h.p. . . . . . .D.V.D. .A. . .D.S.8.A.C.........................rN.D+..,.\...........BO
Boot000A* WDC WD3200BEKX-75B7WT0 PciRoot(0x0)/Pci(0x1f,0x2)/Sata(3,65535,0)/HD(1,GPT,07d12838-f492-47a9-b8da-b307ccc60fdf,0x800,0x100000)..BO
Boot000C* SanDisk SD7SB3Q-128G-1006 PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0,65535,0)/HD(1,GPT,e9b4c171-a67b-473c-844d-ca7d1b604fb6,0x800,0x32000)..BO
64349b3622c65f495a99dbf6102496e3 nvme0n1p1/BOOT/bkpbootx64.efi
64349b3622c65f495a99dbf6102496e3 nvme0n1p1/BOOT/bootx64.efi
a9c517741ac31962d7feb152948ad1ee nvme0n1p1/BOOT/fbx64.efi
5ddf997e8b025bfbc2009e85b32f60dc nvme0n1p1/BOOT/grubx64.efi
a660182adef313615746a665966d2ccc nvme0n1p1/BOOT/mmx64.efi
5ddf997e8b025bfbc2009e85b32f60dc nvme0n1p1/ubuntu/grubx64.efi
a660182adef313615746a665966d2ccc nvme0n1p1/ubuntu/mmx64.efi
64349b3622c65f495a99dbf6102496e3 nvme0n1p1/ubuntu/shimx64.efi
ae8af199ef80311f9cee9de104a15496 nvme0n1p2/boot/bootx64.efi
1309af23db7b4cdd16bb29b41d6975e5 nvme0n1p2/microsoft/boot/cdboot.efi
ba914e4bb811a1b27220f020d2672167 nvme0n1p2/microsoft/boot/cdboot_noprompt.efi
261d615bf3021028e8026792c63f2aab sda1/Boot/bkpbootx64.efi
64349b3622c65f495a99dbf6102496e3 sda1/Boot/bootx64.efi
5dabe049a4dad758d975dc2e60a7f00e sda1/Boot/fbx64.efi
43ff9f5ed17495c46afef40ab5a53e42 sda1/Boot/grubx64.efi
b5698f2f88c3917bdf0c9f0f2a45d469 sda1/ubuntu/fwupx64.efi
621356d82b109cd860ad92cdf241c58b sda1/ubuntu/grubx64.efi
f243a42f3bd3164872e792dbc2610270 sda1/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95 sda1/ubuntu/shimx64.efi
f2c9c5c28ef51a83d75db5d108b1a310 sda1/Microsoft/Boot/bootmgfw.efi
46288d3cb6a91cb97d25474930f95dfb sda1/Microsoft/Boot/bootmgr.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sdb : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
nvme0n1 : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 2048 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sdb2 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
nvme0n1p4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme0n1p2 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda3 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p4 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
nvme0n1p2 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot
sdb1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda3 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sdb2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
nvme0n1p3 : maybesepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme0n1p2 : not--sepboot, no---boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
sdb1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sda4 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda3 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 1759318E-DCB4-4B59-BC80-9427D640A84B
Start End Sectors Size Type
nvme0n1p1 2048 75775 73728 36M EFI System
nvme0n1p2 616181760 1128181759 512000000 244.1G Linux filesystem
nvme0n1p3 1128181760 1953523711 825341952 393.6G Linux filesystem
nvme0n1p4 6164480 616181759 610017280 290.9G Microsoft basic data
Partition table entries are not in disk order.
Disk sda: 119.24 GiB, 128035676160 bytes, 250069680 sectors
Disk identifier: 9EADD9A7-A013-414B-830C-4D0883EB4760
Start End Sectors Size Type
sda1 2048 206847 204800 100M EFI System
sda2 206848 239615 32768 16M Microsoft reserved
sda3 239616 248995169 248755554 118.6G Microsoft basic data
sda4 248995840 250066943 1071104 523M Windows recovery environment
Disk sdb: 298.09 GiB, 320072933376 bytes, 625142448 sectors
Disk identifier: 3CD568F6-7A3E-41CB-B31F-31797D32C9F5
Start End Sectors Size Type
sdb1 2048 1050623 1048576 512M EFI System
sdb2 1050624 500967423 499916800 238.4G Linux filesystem
parted -lm (filtered): _________________________________________________________
sda:128GB:scsi:512:4096:gpt:ATA SanDisk SD7SB3Q-:;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot, esp;
2:106MB:123MB:16.8MB::Microsoft reserved partition:msftres;
3:123MB:127GB:127GB:ntfs:Basic data partition:msftdata;
4:127GB:128GB:548MB:ntfs::hidden, diag;
sdb:320GB:scsi:512:512:gpt:ATA WDC WD3200BEKX-7:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:256GB:256GB:ext4::;
nvme0n1:1000GB:nvme:512:512:gpt:WDC WDS100T2B0C:;
1:1049kB:38.8MB:37.7MB:fat32::boot, esp;
4:3156MB:315GB:312GB:ntfs:Windows 10:hidden, msftdata;
2:315GB:578GB:262GB:ext4::;
3:578GB:1000GB:423GB:ext4::;
Free space >10MiB: ______________________________________________________________
nvme0n1: 37.0MiB:3010MiB:2973MiB
sdb: 244613MiB:305245MiB:60632MiB
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat 520E-296B e9b4c171-a67b-473c-844d-ca7d1b604fb6 EFI system partition
├─sda2 f3bdebb6-4441-4fa9-bdba-4b7111e21db4 Microsoft reserved partition
├─sda3 ntfs 8CA40F38A40F23F4 0ddd0552-64c7-4eb2-9933-2379f6244c8a Basic data partition
└─sda4 ntfs 567099EC7099D2DB 4b6cd196-2431-450c-8f87-c854dd9430d5
sdb
├─sdb1 vfat B0BB-2DA6 07d12838-f492-47a9-b8da-b307ccc60fdf EFI System Partition
└─sdb2 ext4 4c26c065-d62d-4568-b08a-92dc9622ff99 91000ed6-e6dc-4408-a52e-5d7574e0dad7
nvme0n1
├─nvme0n1p1 vfat 72D3-CD14 bbc2ef27-4d66-4355-ac04-7bf61f624775 ESP
├─nvme0n1p2 ext4 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8 7a1056d9-9070-45d8-a883-4aa49324d6d6
├─nvme0n1p3 ext4 e4daf880-091b-4cdb-855d-1fbba1c0e3d8 dd1f9f1f-9aa3-41d5-bb4b-01dd5d73e259
└─nvme0n1p4 ntfs 516240271FFB565D 74dd419d-15c5-4402-a0ea-ca318f32efbf Windows 10
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/nvme0n1p1 26M 27% /mnt/boot-sav/nvme0n1p1
/dev/nvme0n1p2 138.2G 37% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p3 366.6G 0% /mnt/boot-sav/nvme0n1p3
/dev/nvme0n1p4 127.7G 56% /media/henri/516240271FFB565D
/dev/sda1 64.5M 33% /mnt/boot-sav/sda1
/dev/sda3 61.9G 48% /media/sda3
/dev/sda4 88.6M 83% /media/sda4
/dev/sdb2 131.9G 38% /
/dev/sdb2[/usr/share/hunspell] 131.9G 38% /var/snap/firefox/common/host-hunspell
Mount options (filtered): ______________________________________________________
/dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/nvme0n1p2 ext4 rw,relatime
/dev/nvme0n1p3 ext4 rw,relatime
/dev/nvme0n1p4 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda3 fuseblk ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda4 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdb2 ext4 rw,relatime,errors=remount-ro
/dev/sdb2[/usr/share/hunspell] ext4 ro,noexec,noatime,errors=remount-ro
=================== nvme0n1p1/efi/ubuntu/grub.cfg (filtered) ===================
search.fs_uuid 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8 root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
=================== nvme0n1p2/boot/grub/grub.cfg (filtered) ====================
Ubuntu 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8
Ubuntu, with Linux 5.15.0-76-generic 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8
Windows Boot Manager (on sda1) osprober-efi-520E-296B
Ubuntu 22.04.2 LTS (22.04) (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-76-generic (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-75-generic (on sdb2) 4c26c065-d62d-4568-b08a-92dc9622ff99
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
======================== nvme0n1p2/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8 / ext4 errors=remount-ro 0 1
UUID=516240271FFB565D /media/henri/516240271FFB565D ntfs-3g defaults,nodev,nosuid,locale=fr_BE.UTF-8 0 0
UUID=8CA40F38A40F23F4 /media/sda3 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
UUID=567099EC7099D2DB /media/sda4 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
/swapfile none swap sw 0 0
UUID=72D3-CD14 /boot/efi vfat defaults 0 1
==================== nvme0n1p2/etc/default/grub (filtered) =====================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
================= nvme0n1p2: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
449.944328308 = 483.124043776 boot/grub/grub.cfg 1
297.607418060 = 319.553531904 boot/vmlinuz 2
297.607418060 = 319.553531904 boot/vmlinuz-5.15.0-76-generic 2
297.607418060 = 319.553531904 boot/vmlinuz.old 2
317.810035706 = 341.245927424 boot/initrd.img 5
317.810035706 = 341.245927424 boot/initrd.img-5.15.0-76-generic 5
317.810035706 = 341.245927424 boot/initrd.img.old 5
=================== nvme0n1p2: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 18683 Dec 18 2022 10_linux
-rwxr-xr-x 1 root root 43031 Dec 18 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Dec 18 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Dec 18 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Dec 18 2022 40_custom
-rwxr-xr-x 1 root root 215 Dec 18 2022 41_custom
===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 47bf659a-335f-4fd1-9d14-d2fdc66aeb1a root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
===================== sdb1/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 4c26c065-d62d-4568-b08a-92dc9622ff99 root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sdb2/boot/grub/grub.cfg (filtered) ======================
Ubuntu 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu (on nvme0n1p2) 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8
Ubuntu, with Linux 5.15.0-76-generic (on nvme0n1p2) 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8
UEFI Firmware Settings uefi-firmware
Windows 10"{
Ubuntu 22.04.2 LTS (22.04) (on nvme0n1p2) 3d3e6bc3-e125-4b11-aadc-30d7ee24dfb8
Windows Boot Manager (on sda1) osprober-efi-520E-296B
Ubuntu, with Linux 5.15.0-76-generic 4c26c065-d62d-4568-b08a-92dc9622ff99
Ubuntu, with Linux 5.15.0-75-generic 4c26c065-d62d-4568-b08a-92dc9622ff99
========================== sdb2/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=4c26c065-d62d-4568-b08a-92dc9622ff99 / ext4 errors=remount-ro 0 1
UUID=B0BB-2DA6 /boot/efi vfat defaults 0 1
UUID=516240271FFB565D /media/henri/516240271FFB565D ntfs-3g defaults,nodev,nosuid,locale=fr_BE.UTF-8 0 0
UUID=8CA40F38A40F23F4 /media/sda3 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
UUID=567099EC7099D2DB /media/sda4 ntfs-3g defaults,locale=fr_BE.UTF-8 0 0
/swapfile none swap sw 0 0
======================= sdb2/etc/default/grub (filtered) =======================
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="menu"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER="false"
==================== sdb2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
168.626018524 = 181.060808704 boot/grub/grub.cfg 1
102.066455841 = 109.593022464 boot/vmlinuz 1
115.675830841 = 124.205977600 boot/vmlinuz-5.15.0-75-generic 1
102.066455841 = 109.593022464 boot/vmlinuz-5.15.0-76-generic 1
115.675830841 = 124.205977600 boot/vmlinuz.old 1
76.867652893 = 82.536013824 boot/initrd.img 7
110.243160248 = 118.372691968 boot/initrd.img-5.15.0-75-generic 5
76.867652893 = 82.536013824 boot/initrd.img-5.15.0-76-generic 7
110.243160248 = 118.372691968 boot/initrd.img.old 5
===================== sdb2: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 2884 Jul 12 19:25 10_linux_proxy
-rwxr-xr-x 1 root root 43031 Apr 15 2022 32_linux_zfs
-rwxr-xr-x 1 root root 14387 Dec 18 2022 33_linux_xen
-rwxr-xr-x 1 root root 2924 Feb 6 2022 34_memtest86+
-rwxr-xr-x 1 root root 920 Jul 12 19:25 35_os-prober_proxy
-rwxr-xr-x 1 root root 169 Jul 12 19:25 40_custom_proxy
-rwxr-xr-x 1 root root 215 Apr 15 2022 41_custom
drwxr-xr-x 4 root root 4096 Jan 24 2022 backup
drwxr-xr-x 2 root root 4096 Jul 12 19:25 bin
drwxr-xr-x 2 root root 4096 Jul 12 19:25 proxifiedScripts
========================= sdb2/etc/grub.d/32_linux_zfs =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2019 Canonical Ltd.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "${pkgdatadir}/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
set -u
## Skip early if zfs utils isn't installed (instead of failing on first zpool list)
if ! `which zfs >/dev/null 2>&1`; then
exit 0
fi
imported_pools=""
MNTDIR="$(mktemp -d ${TMPDIR:-/tmp}/zfsmnt.XXXXXX)"
ZFSTMP="$(mktemp -d ${TMPDIR:-/tmp}/zfstmp.XXXXXX)"
machine="$(uname -m)"
case "${machine}" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="${machine}" ;;
esac
RC=0
on_exit() {
# Restore initial zpool import state
for pool in ${imported_pools}; do
zpool export "${pool}"
done
mountpoint -q "${MNTDIR}" && umount "${MNTDIR}" || true
rmdir "${MNTDIR}"
rm -rf "${ZFSTMP}"
exit "${RC}"
}
trap on_exit EXIT INT QUIT ABRT PIPE TERM
# List ONLINE and DEGRADED pools
import_pools() {
# We have to ignore zpool import output, as potentially multiple / will be available,
# and we need to autodetect all zpools this way with their real mountpoints.
local initial_pools="$(zpool list | awk '{if (NR>1) print $1}')"
local all_pools=""
local imported_pools=""
local err=""
set +e
err="$(zpool import -f -a -o cachefile=none -o readonly=on -N 2>&1)"
# Only print stderr if the command returned an error
# (it can echo "No zpool to import" with success, which we don't want)
if [ $? -ne 0 ]; then
echo "Some pools couldn't be imported and will be ignored:\n${err}" >&2
fi
set -e
all_pools="$(zpool list | awk '{if (NR>1) print $1}')"
for pool in ${all_pools}; do
if echo "${initial_pools}" | grep -wq "${pool}"; then
continue
fi
imported_pools="${imported_pools} ${pool}"
done
echo "${imported_pools}"
}
# List all the dataset with a root mountpoint
get_root_datasets() {
local pools="$(zpool list | awk '{if (NR>1) print $1}')"
for p in ${pools}; do
local rel_pool_root=$(zpool get -H altroot ${p} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root="/"
fi
zfs list -H -o name,canmount,mountpoint -t filesystem | grep -E '^'"${p}"'(\s|/[[:print:]]*\s)(on|noauto)\s'"${rel_pool_root}"'$' | awk '{print $1}'
done
}
# find if given datasets can be mounted for directory and return its path (snapshot or real path)
# $1 is our current dataset name
# $2 directory path we look for (cannot contains /)
# $3 is the temporary mount directory to use
# $4 is the optional snapshot name
# return path for directory (which can be a mountpoint)
validate_system_dataset() {
local dataset="$1"
local directory="$2"
local mntdir="$3"
local snapshot_name="$4"
local mount_path="${mntdir}/${directory}"
if ! zfs list "${dataset}" >/dev/null 2>&1; then
return
fi
if ! mount -o noatime,zfsutil -t zfs "${dataset}" "${mount_path}"; then
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset}@${snapshot_name}'. Ignoring"
return
fi
local candidate_path="${mount_path}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${dataset}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}"
fi
if [ -n "$(ls "${candidate_path}" 2>/dev/null)" ]; then
echo "${candidate_path}"
return
else
mountpoint -q "${mount_path}" && umount "${mount_path}" || true
fi
}
# Detect system directory relevant to the other, trying to find the ones associated on the current dataset or snapshot/
# System directory should be at most a direct child dataset of main datasets (no recursivity)
# We can fallback trying other zfs pools if no match has been found.
# $1 is our current dataset name (which can have @snapshot name)
# $2 directory path we look for (cannot contains /)
# $3 restrict_to_same_pool (true|false) force looking for dataset with the same basename in the current dataset pool only
# $4 is the temporary mount directory to use
# $5 is the optional etc directory (if not $2 is not etc itself)
# return path for directory (which can be a mountpoint)
get_system_directory() {
local dataset_path="$1"
local directory="$2"
local restrict_to_same_pool="$3"
local mntdir="$4"
local etc_dir="$5"
if [ -z "${etc_dir}" ]; then
etc_dir="${mntdir}/etc"
fi
local candidate_path="${mntdir}/${directory}"
# 1. Look for /etc/fstab first (which will mount even on top of non empty $directory)
local mounted_fstab_entry="false"
if [ -f "${etc_dir}/fstab" ]; then
mount_args=$(awk '/^[^#].*[ \t]\/'"${directory}"'[ \t]/ {print "-t", $3, $1}' "${etc_dir}/fstab")
if [ -n "${mount_args}" ]; then
mounted_fstab_entry="true"
mount -o noatime ${mount_args} "${candidate_path}" || mounted_fstab_entry="false"
fi
fi
# If directory isn't empty. Only count if coming from /etc/fstab. Will be
# handled below otherwise as we are interested in potential snapshots.
if [ "${mounted_fstab_entry}" = "true" -a -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2. Handle zfs case, which can be a snapshots.
local base_dataset_path="${dataset_path}"
local snapshot_name=""
# For snapshots we extract the parent dataset
if echo "${dataset_path}" | grep -q '@'; then
base_dataset_path=$(echo "${dataset_path}" | cut -d '@' -f1)
snapshot_name=$(echo "${dataset_path}" | cut -d '@' -f2)
fi
base_dataset_name="${base_dataset_path##*/}"
base_pool="$(echo "${base_dataset_path}" | cut -d'/' -f1)"
# 2.a) Look for child dataset included in base dataset, which needs to hold same snapshot if any
candidate_path=$(validate_system_dataset "${base_dataset_path}/${directory}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
# 2.b) Look for current dataset (which is already mounted as /)
candidate_path="${mntdir}/${directory}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${base_dataset_path}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}/${directory}"
fi
if [ -n "$(ls "${candidate_path}" 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2.c) Look for every datasets in every pool which isn't the current dataset which holds:
# - the same dataset name (last section) than our base_dataset_name
# - mountpoint=directory
# - canmount!=off
all_same_base_dataset_name="$(zfs list -H -t filesystem -o name,canmount | awk '/^[^ ]+\/'"${base_dataset_name}"'[ \t](on|noauto)/ {print $1}') "
# order by local pool datasets first
current_pool_same_base_datasets=""
other_pools_same_base_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_same_base_dataset_name}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_same_base_datasets="${current_pool_same_base_datasets} ${d}"
else
other_pools_same_base_datasets="${other_pools_same_base_datasets} ${d}"
fi
done
ordered_same_base_datasets="${current_pool_same_base_datasets} ${other_pools_same_base_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_same_base_datasets="${current_pool_same_base_datasets}"
fi
# now, loop over them
for d in ${ordered_same_base_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${candidate_dataset}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
# 2.d) If we didn't find anything yet: check for persistent datasets corresponding to our mountpoint, with canmount=on without any snapshot associated:
# Note: we go over previous datasets as well, but this is ok, as we didn't include them before.
all_mountable_datasets="$(zfs list -t filesystem -o name,canmount | awk '/^[^ ]+[ \t]+on/ {print $1}')"
# order by local pool datasets first
current_pool_datasets=""
other_pools_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_mountable_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_datasets="${current_pool_datasets} ${d}"
else
other_pools_datasets="${other_pools_datasets} ${d}"
fi
done
ordered_datasets="${current_pool_datasets} ${other_pools_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_datasets="${current_pool_datasets}"
fi
for d in ${ordered_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${d}" "${directory}" "${mntdir}" "")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset_path}'. Ignoring"
return
}
# Try our default layout bpool as a prefered layout (fast path)
# This is get_system_directory for boot optimized for our default installation layout
# $1 is our current dataset name (which can have @snapshot name)
# $2 is the temporary mount directory to use
# return path for directory (which can be a mountpoint) if found
try_default_layout_bpool() {
local root_dataset_path="$1"
local mntdir="$2"
dataset_basename="${root_dataset_path##*/}"
candidate_dataset="bpool/BOOT/${dataset_basename}"
dataset_properties="$(zfs get -H mountpoint,canmount "${candidate_dataset}" 2>/dev/null | cut -f3 | paste -sd ' ')"
if [ -z "${dataset_properties}" ]; then
return
fi
rel_pool_root=$(zpool get -H altroot bpool | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
snapshot_name="${dataset_basename##*@}"
[ "${snapshot_name}" = "${dataset_basename}" ] && snapshot_name=""
if [ -z "${snapshot_name}" ]; then
if ! echo "${dataset_properties}" | grep -Eq "${rel_pool_root}/boot (on|noauto)"; then
return
fi
else
candidate_dataset=$(echo "${candidate_dataset}" | cut -d '@' -f1)
fi
validate_system_dataset "${candidate_dataset}" "boot" "${mntdir}" "${snapshot_name}"
}
# Return if secure boot is enabled on that system
is_secure_boot_enabled() {
if LANG=C mokutil --sb-state 2>/dev/null | grep -qi enabled; then
echo "true"
return
fi
echo "false"
return
}
# Given a filesystem or snapshot dataset, returns dataset|machine id|pretty name|last used
# $1 is dataset we want information from
# $2 is the temporary mount directory to use
get_dataset_info() {
local dataset="$1"
local mntdir="$2"
local base_dataset="${dataset}"
local etc_dir="${mntdir}/etc"
local is_snapshot="false"
# For snapshot we extract the parent dataset
if echo "${dataset}" | grep -q '@'; then
base_dataset=$(echo "${dataset}" | cut -d '@' -f1)
is_snapshot="true"
fi
mount -o noatime,zfsutil -t zfs "${base_dataset}" "${mntdir}"
# read machine-id/os-release from /etc
etc_dir=$(get_system_directory "${dataset}" "etc" "true" "${mntdir}" "")
if [ -z "${etc_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
umount "${mntdir}"
return
fi
machine_id=""
if [ -f "${etc_dir}/machine-id" ]; then
machine_id=$(cat "${etc_dir}/machine-id")
fi
# We have to use a random temporary id if we don't have any machine-id file or if this one is empty
# (mostly the case of new installations before first boot).
# Let's use the dataset name directly for this.
# Consequence is that all datasets are then separated.
if [ -z "${machine_id}" ]; then
machine_id="${dataset}"
fi
pretty_name=$(. "${etc_dir}/os-release" && echo "${PRETTY_NAME}")
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
# read available kernels from /boot
boot_dir="$(try_default_layout_bpool "${dataset}" "${mntdir}")"
if [ -z "${boot_dir}" ]; then
boot_dir=$(get_system_directory "${dataset}" "boot" "false" "${mntdir}" "${etc_dir}")
fi
if [ -z "${boot_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
umount "${mntdir}"
return
fi
initrd_list=""
kernel_list=""
candidate_kernel_list="$(find "${boot_dir}" -maxdepth 1 -type f -regex '.*/\(vmlinuz\|vmlinux\|kernel\)-.*')"
while [ -n "${candidate_kernel_list}" ] ; do
list_basename="$(echo "${candidate_kernel_list}" | sed -e 's#.*/##')"
linux=$(version_find_latest ${list_basename})
linux=$(echo "${candidate_kernel_list}" | while read k; do
if [ "$(basename "${k}")" = "${linux}" ]; then
echo -n "${k}"
break
fi
done)
# || true to not abort even if candidate_kernel_list is empty on last entry
candidate_kernel_list="$(echo "${candidate_kernel_list}" | fgrep -vx "${linux}"||true)"
if ! grub_file_is_not_garbage "${linux}" ; then
continue
fi
# Filters entry if efi/non efi.
# Note that for now we allow kernel without .efi.signed as those are signed kernel
# on ubuntu, loaded by the shim.
case "${linux}" in
*.efi.signed)
if [ "$(is_secure_boot_enabled)" = "false" ]; then
continue
fi
;;
esac
linux_basename=$(basename "${linux}")
linux_dirname=$(dirname "${linux}")
version=$(echo "${linux_basename}" | sed -e "s,^[^0-9]*-,,g")
alt_version=$(echo "${version}" | sed -e "s,\.old$,,g")
gettext_printf "Found linux image: %s in %s\n" "${linux_basename}" "${dataset}" >&2
initrd=""
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${linux_dirname}/${i}" ; then
initrd="$i"
break
fi
done
if test -z "${initrd}" ; then
grub_warn "Couldn't find any valid initrd for dataset ${dataset}."
continue
fi
gettext_printf "Found initrd image: %s in %s\n" "${initrd}" "${dataset}" >&2
rel_linux_dirname=$(make_system_path_relative_to_its_root "${linux_dirname}")
initrd_list="${initrd_list}|${rel_linux_dirname}/${initrd}"
kernel_list="${kernel_list}|${rel_linux_dirname}/${linux_basename}"
done
initrd_list="${initrd_list#|}"
kernel_list="${kernel_list#|}"
initrd_device=$(${grub_probe} --target=device "${boot_dir}" | head -1)
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
# We needed to look in / for snapshots on root dataset, umount there before zfs lazily unmount it
case "${boot_dir}" in /boot/.zfs/snapshot/*)
umount "${boot_dir}" || true
;;
esac
# for zsys snapshots: we want to know which kernel we successful last booted with
last_booted_kernel=$(zfs get -H com.ubuntu.zsys:last-booted-kernel "${dataset}" | awk -v FS='\t' '{print $3}')
# snapshot: last_used is dataset creation time
if [ "${is_snapshot}" = "true" ]; then
last_used="$(zfs get -pH creation "${dataset}" | awk -F '\t' '{print $3}')"
# otherwise, last_used is manually marked at boot/shutdown on a root dataset for zsys
else
# if current system, take current time
if zfs mount | awk '/[ \t]+\/$/ {print $1}' | grep -q "${dataset}"; then
last_used=$(date +%s)
else
last_used=$(zfs get -H com.ubuntu.zsys:last-used "${dataset}" | awk '{print $3}')
# case of non zsys, or zsys without annotation, take /etc/machine-id stat (as we mounted with noatime).
# However, as systems can be relatime, if system is current mounted one, set current time (case of clone + reboot
# within the same d).
if [ "${last_used}" = "-" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/os-release")
if [ -f "${mntdir}/etc/machine-id" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/machine-id")
fi
fi
fi
fi
is_zsys=$(zfs get -H com.ubuntu.zsys:bootfs "${base_dataset}" | awk '{print $3}')
if [ -n "${initrd_list}" -a -n "${kernel_list}" ]; then
echo "${dataset}\t${is_zsys}\t${machine_id}\t${pretty_name}\t${last_used}\t${initrd_device}\t${initrd_list}\t${kernel_list}\t${last_booted_kernel}"
else
grub_warn "didn't find any valid initrd or kernel."
fi
umount "${mntdir}" || true
# We needed to look in / for snapshots on root dataset, umount the snapshot for etc before zfs lazily unmount it
case "${etc_dir}" in /.zfs/snapshot/*/etc)
snapshot_path="$(findmnt -n -o TARGET -T "${etc_dir}")"
umount "${snapshot_path}" || true
;;
esac
}
# Scan available boot options and returns in a formatted list
# $1 is the temporary mount directory to use
bootlist() {
local mntdir="$1"
local boot_list=""
for dataset in $(get_root_datasets); do
# get information from current root dataset
boot_list="${boot_list}$(get_dataset_info "${dataset}" ${mntdir})\n"
# get information from snapshots of this root dataset
snapshots="$(zfs list -H -o name -t snapshot "${dataset}"|while read snapshot_dataset; do
get_dataset_info "${snapshot_dataset}" ${mntdir}
done)"
[ -n "${snapshots}" ] && boot_list="${boot_list}${snapshots}\n"
done
echo "${boot_list}"
}
# Order machine ids by last_used from their main entry
get_machines_sorted() {
local bootlist="$1"
local machineids="$(echo "${bootlist}" | awk '{print $3}' | sort -u)"
for machineid in ${machineids}; do
echo "${bootlist}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print $5, $3}' | sort -nr | grep -E "[^^]\b${machineid}\b" | head -1
done | sort -nr | awk '{print $2}'
}
# Sort entries by last_used for a given machineid
sort_entries_for_machineid() {
local bootlist="$1"
local machineid="$2"
tab="$(printf '\t')"
echo "${bootlist}" | grep -E "[^^]\b${machineid}\b" | sort -k5,5r -k1,1 -t "${tab}"
}
# Return main entry index
get_main_entry() {
local entries="$1"
echo "${entries}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print}' | head -1
}
# Return specific field at index from entry
get_field_from_entry() {
local entry="$1"
local index="$2"
echo "${entry}" | awk "BEGIN{FS=\"\t\"} {print \$$index}"
}
# Get the main entry metadata
main_entry_meta() {
local main_entry="$1"
initrd=$(get_field_from_entry "${main_entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${main_entry}" 8 | cut -d'|' -f1)
# Take first element (most recent entry) which is not a snapshot
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"main\", \$4, \$1, \$6, \"$initrd\", \"$kernel\"}"
}
# Get advanced entries metadata
advanced_entries_meta() {
local main_entry="$1"
last_used_kernel="$(get_field_from_entry "${main_entry}" 9 )"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
oldIFS="$IFS"
export IFS='|'
set -- $(get_field_from_entry "${main_entry}" 7)
for kernel in $(get_field_from_entry "${main_entry}" 8); do
# get initrd and pop to the next one
initrd="$1"; shift
was_last_used_kernel="false"
kernel_basename=$(basename "${kernel}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
was_last_used_kernel="true"
fi
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"advanced\", \$4, \$1, \$6, \"$initrd\", \"$kernel\", \"$was_last_used_kernel\"}"
done
IFS="$oldIFS"
}
# Get history metadata
history_entries_meta() {
local entries="$1"
local main_dataset_name="$2"
local main_dataset_releasename="$3"
if [ -z "${entries}" ]; then
return
fi
# Traverse snapshots and clones
echo "${entries}" | while read entry; do
name=""
# Compute snapshot/filesystem dataset name
snap_dataset_name="$(get_field_from_entry "${entry}" 1)"
snapname="${snap_dataset_name##*@}"
# If, this is a clone, take what is after main_dataset_name
if [ "${snapname}" = "${snap_dataset_name}" ]; then
snapname="${snap_dataset_name##${main_dataset_name}_}"
# Handle manual user clone (not prefixed by "main_dataset_name")
snapname="${snapname##*/}"
fi
# We keep the snapname only if it is not only a zsys auto snapshot
if echo "${snapname}" | grep -q "^autozsys_"; then
snapname=""
fi
# We store the release only if it different from main dataset release (snapshot before a release upgrade)
releasename=$(get_field_from_entry "${entry}" 4)
if [ "${releasename}" = "${main_dataset_releasename}" ]; then
releasename=""
fi
# Snapshot date
foo="$(get_field_from_entry "${entry}" 5)"
snapdate="$(date -d @$(get_field_from_entry "${entry}" 5) "+%x @ %H:%M")"
# For snapshots/clones the name can have the following formats:
# <DATE>: autozsys, same release
# <OLD_RELEASE> on <DATE>: autozsys, different release
# <SNAPNAME> on <DATE>: Manual snapshot, same release
# <SNAPNAME>, <OLD_RELEASE> on <DATE>: Manual snapshot, different release
if [ "${snapname}" = "" -a "${releasename}" = "" ]; then
name="${snapdate}"
elif [ "${snapname}" = "" -a "${releasename}" != "" ]; then
name=$(gettext_printf "%s on %s" "${releasename}" "${snapdate}")
elif [ "${snapname}" != "" -a "${releasename}" = "" ]; then
name=$(gettext_printf "%s on %s" "${snapname}" "${snapdate}")
else # snapname != "" && releasename != ""
name=$(gettext_printf "%s, %s on %s" "${snapname}" "${releasename}" "${snapdate}")
fi
# Choose kernel and initrd if the snapshot was booted successfully on a specific kernel before
# Take latest by default if no match
initrd=$(get_field_from_entry "${entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${entry}" 8 | cut -d'|' -f1)
last_used_kernel="$(get_field_from_entry "${entry}" 9)"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
oldIFS="$IFS"
export IFS='|'
set -- $(get_field_from_entry "${entry}" 7)
for k in $(get_field_from_entry "${entry}" 8); do
# get initrd and pop to the next one
candidate_initrd="$1"; shift
kernel_basename=$(basename -- "${k}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
kernel="${k}"
initrd="${candidate_initrd}"
break
fi
done
IFS="$oldIFS"
echo "${entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"history\", \"$name\", \$1, \$6, \"$initrd\", \"$kernel\"}"
done
}
# Generate metadata from a BOOTLIST that will subsequently used to generate
# the final grub menu entries
generate_grub_menu_metadata() {
local bootlist="$1"
# Sort machineids by last_used from their main entry
for machineid in $(get_machines_sorted "${bootlist}"); do
entries="$(sort_entries_for_machineid "${bootlist}" ${machineid})"
main_entry="$(get_main_entry "${entries}")"
if [ -z "$main_entry" ]; then
continue
fi
main_entry_meta "${main_entry}"
advanced_entries_meta "${main_entry}"
main_dataset_name="$(get_field_from_entry "${main_entry}" 1)"
main_dataset_releasename="$(get_field_from_entry "${main_entry}" 4)"
# grep -v errcode != 0 if there is no match. || true to not fail with -e
other_entries="$(echo "${entries}" | grep -v "${main_entry}" || true)"
history_entries_meta "${other_entries}" "${main_dataset_name}" "${main_dataset_releasename}"
done
}
# Print the configuration part common to all sections
# Note:
# If 10_linux runs these part will be defined twice in grub configuration
print_menu_prologue() {
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "${vt_handoff}" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
GRUB_GFXPAYLOAD_LINUX="${GRUB_GFXPAYLOAD_LINUX:-}"
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 0 ]; then
echo "set linux_gfx_mode=${GRUB_GFXPAYLOAD_LINUX}"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
}
# Cache for prepare_grub_to_access_device call
# $1: boot_device
# $2: submenu_level
prepare_grub_to_access_device_cached() {
local boot_device="$1"
local submenu_level="$2"
local boot_device_idx="$(echo ${boot_device} | tr '/' '_')"
cache_file="${ZFSTMP}/$(echo boot_device${boot_device_idx})"
if [ ! -f "${cache_file}" ]; then
set +u
echo "$(prepare_grub_to_access_device "${boot_device}")" > "${cache_file}"
set -u
for i in 0 1 2; do
submenu_indentation="$(printf %${i}s | tr " " "${grub_tab}")"
sed "s/^/${submenu_indentation} /" "${cache_file}" > "${cache_file}--${i}"
done
fi
cat "${cache_file}--${submenu_level}"
}
# Print a grub menu entry
zfs_linux_entry () {
submenu_level="$1"
title="$2"
type="$3"
dataset="$4"
boot_device="$5"
initrd="$6"
kernel="$7"
kernel_version="$8"
kernel_additional_args="${9:-}"
boot_devices="${10:-}"
submenu_indentation="$(printf %${submenu_level}s | tr " " "${grub_tab}")"
echo "${submenu_indentation}menuentry '$(echo "${title}" | grub_quote)' ${CLASS} \${menuentry_id_option} 'gnulinux-${dataset}-${kernel_version}' {"
if [ "${quick_boot}" = 1 ]; then
echo "${submenu_indentation} recordfail"
fi
if [ "${type}" != "recovery" ] ; then
GRUB_SAVEDEFAULT=${GRUB_SAVEDEFAULT:-}
default_entry="$(save_default_entry)"
if [ -n "${default_entry}" ]; then
echo "${submenu_indentation} ${default_entry}"
fi
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "${GRUB_GFXPAYLOAD_LINUX}" = "" ]; then
echo "${submenu_indentation} load_video"
else
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "text" ]; then
echo "${submenu_indentation} load_video"
fi
fi
if ([ "${ubuntu_recovery}" = 0 ] || [ "${type}" != "recovery" ]) && \
([ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 1 ]); then
echo "${submenu_indentation} gfxmode \${linux_gfx_mode}"
fi
echo "${submenu_indentation} insmod gzio"
echo "${submenu_indentation} if [ \"\${grub_platform}\" = xen ]; then insmod xzio; insmod lzopio; fi"
if [ -n "$boot_devices" ]; then
for device in ${boot_devices}; do
echo "${submenu_indentation} if [ "${boot_device}" = "${device}" ]; then"
echo "$(prepare_grub_to_access_device_cached "${device}" $(( submenu_level +1 )) )"
echo "${submenu_indentation} fi"
done
else
echo "$(prepare_grub_to_access_device_cached "${boot_device}" "${submenu_level}")"
fi
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo $(gettext_printf "Loading Linux %s ..." ${kernel_version} | grub_quote)"
fi
linux_default_args="${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ ${type} = "recovery" ]; then
linux_default_args="${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
# echo in echo trims end of line spaces
echo "${submenu_indentation} linux \"${kernel}\" root=ZFS=\"${dataset}\" ro $(echo ${linux_default_args} ${kernel_additional_args})"
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo '$(gettext_printf "Loading initial ramdisk ..." | grub_quote)'"
fi
echo "${submenu_indentation} initrd \"${initrd}\""
echo "${submenu_indentation}}"
}
# Generate a GRUB Menu from menu meta data
# $1 menu metadata
generate_grub_menu() {
local menu_metadata="$1"
local last_section=""
local main_dataset_name=""
local main_dataset=""
local have_zsys=""
if [ -z "${menu_metadata}" ]; then
return
fi
CLASS="--class gnu-linux --class gnu --class os"
if [ "${GRUB_DISTRIBUTOR}" = "" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1 | LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "${ubuntu_recovery}" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} nomodeset"
fi
case "$GENKERNEL_ARCH" in
x86*) GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY dis_ucode_ldr";;
esac
if [ "${vt_handoff}" = 1 ]; then
for word in ${GRUB_CMDLINE_LINUX_DEFAULT}; do
if [ "${word}" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_DEFAULT} \${vt_handoff}"
fi
done
fi
print_menu_prologue
cat<<'EOF'
function zsyshistorymenu {
# $1: root dataset (eg rpool/ROOT/ubuntu_2zhm07@autozsys_k56fr6)
# $2: boot device id (eg 411f29ce1557bfed)
# $3: initrd (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/initrd.img-5.4.0-21-generic)
# $4: kernel (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/vmlinuz-5.4.0-21-generic)
# $5: kernel_version (eg 5.4.0-21-generic)
set root_dataset="${1}"
set boot_device="${2}"
set initrd="${3}"
set kernel="${4}"
set kversion="${5}"
EOF
boot_devices=$(echo "${menu_metadata}" | cut -d"$(printf '\t')" -f6 | sort -u)
title=$(gettext_printf "Revert system only")
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data")"
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "Revert system only (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
fi
echo "}"
echo
# IFS is set to TAB (ASCII 0x09)
echo "${menu_metadata}" |
{
at_least_one_entry=0
have_zsys="$(which zsysd || true)"
while IFS="$(printf '\t')" read -r machineid iszsys section name dataset device initrd kernel opt; do
# Disable history for non zsys system or if systems is a zsys one and zsys isn't installed.
# In pure zfs systems, we identified multiple issues due to the mount generator
# in upstream zfs which makes it incompatible. Don't show history for now.
if [ "${section}" = "history" ]; then
if [ "${iszsys}" != "yes" ] || [ "${iszsys}" = "yes" -a -z "${have_zsys}" ]; then
continue
fi
fi
if [ "${last_section}" != "${section}" -a -n "${last_section}" ]; then
# Close previous section wrapper
if [ "${last_section}" != "main" ]; then
echo "}" # Add grub_tabs
at_least_one_entry=0
fi
fi
case "${section}" in
main)
title="${name}"
main_dataset_name="${name}"
main_dataset="${dataset}"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
zfs_linux_entry 0 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
at_least_one_entry=1
;;
advanced)
# normal and recovery entries for a given kernel
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "Advanced options for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-advanced-${main_dataset}' {"
fi
last_booted_kernel_marker=""
if [ "${opt}" = "true" ]; then
last_booted_kernel_marker="* "
fi
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
title="$(gettext_printf "%s%s, with Linux %s" "${last_booted_kernel_marker}" "${name}" "${kernel_version}")"
zfs_linux_entry 1 "${title}" "advanced" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY=${GRUB_DISABLE_RECOVERY:-}
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "%s%s, with Linux %s (%s)" "${last_booted_kernel_marker}" "${name}" "${kernel_version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
at_least_one_entry=1
;;
history)
# Revert to a snapshot
# revert system, revert system and user data and associated recovery entries
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "History for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-history-${main_dataset}' {"
fi
if [ "${iszsys}" = "yes" ]; then
title="$(gettext_printf "Revert to %s" "${name}" | grub_quote)"
else
title="$(gettext_printf "Boot on %s" "${name}" | grub_quote)"
fi
echo " submenu '${title}' \${menuentry_id_option} 'gnulinux-history-${dataset}' {"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
# Zsys only: let revert system without destroying snapshots
if [ "${iszsys}" = "yes" ]; then
echo "${grub_tab}${grub_tab}zsyshistorymenu" \"${dataset}\" \"${device}\" \"${initrd}\" \"${kernel}\" \"${kernel_version}\"
# Non-zsys: boot temporarly on snapshots or rollback (destroying intermediate snapshots)
else
title="$(gettext_printf "One time boot")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "One time boot (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 2 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
title="$(gettext_printf "Revert system (all intermediate snapshots will be destroyed)")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}" "rollback=yes"
fi
echo " }"
at_least_one_entry=1
;;
*)
grub_warn "unknown section: ${section}. Ignoring entry ${name} for ${dataset}"
;;
esac
last_section="${section}"
done
if [ "${at_least_one_entry}" -eq 1 ]; then
echo "}"
fi
}
}
# don't add trailing newline of variable is empty
# $1: content to write
# $2: destination file
trailing_newline_if_not_empty() {
content="$1"
dest="$2"
if [ -z "${content}" ]; then
rm -f "${dest}"
touch "${dest}"
return
fi
echo "${content}" > "${dest}"
}
GRUB_LINUX_ZFS_TEST="${GRUB_LINUX_ZFS_TEST:-}"
case "${GRUB_LINUX_ZFS_TEST}" in
bootlist)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
boot_list="$(bootlist ${MNTDIR})"
trailing_newline_if_not_empty "${boot_list}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
metamenu)
boot_list="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
trailing_newline_if_not_empty "${menu_metadata}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
grubmenu)
menu_metadata="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
grub_menu=$(generate_grub_menu "${menu_metadata}")
trailing_newline_if_not_empty "${grub_menu}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
*)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
# Generate the complete list of boot entries
boot_list="$(bootlist ${MNTDIR})"
# Create boot menu meta data from the list of boot entries
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
# Create boot menu meta data from the list of boot entries
grub_menu="$(generate_grub_menu "${menu_metadata}")"
if [ -n "${grub_menu}" ]; then
# We want the trailing newline as a marker will be added
echo "${grub_menu}"
fi
;;
esac
========================= sdb2/etc/grub.d/33_linux_xen =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
CLASS="--class gnu-linux --class gnu --class os --class xen"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
# Default to disabling partition uuid support to maintian compatibility with
# older kernels.
GRUB_DISABLE_LINUX_PARTUUID=${GRUB_DISABLE_LINUX_PARTUUID-true}
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if ( [ "x${GRUB_DEVICE_UUID}" = "x" ] && [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] ) \
|| ( [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
&& [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ] ) \
|| ( ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
&& ! test -e "/dev/disk/by-partuuid/${GRUB_DEVICE_PARTUUID}" ) \
|| ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
elif [ "x${GRUB_DEVICE_UUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ]; then
LINUX_ROOT_DEVICE=PARTUUID=${GRUB_DEVICE_PARTUUID}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
# Allow overriding GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT.
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE}" ]; then
GRUB_CMDLINE_LINUX="${GRUB_CMDLINE_LINUX_XEN_REPLACE}"
fi
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}"
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
;;
esac
title_correction_code=
linux_entry ()
{
linux_entry_xsm "$@" false
linux_entry_xsm "$@" true
}
linux_entry_xsm ()
{
os="$1"
version="$2"
xen_version="$3"
type="$4"
args="$5"
xen_args="$6"
xsm="$7"
# If user wants to enable XSM support, make sure there's
# corresponding policy file.
if ${xsm} ; then
xenpolicy="xenpolicy-$xen_version"
if test ! -e "${xen_dirname}/${xenpolicy}" ; then
return
fi
xen_args="$xen_args flask=enforcing"
xen_version="$(gettext_printf "%s (XSM enabled)" "$xen_version")"
# xen_version is used for messages only; actual file is xen_basename
fi
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
if [ x$type = xrecovery ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
elif [ "${type#init-}" != "$type" ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "${type#init-}")"
else
title="$(gettext_printf "%s, with Xen %s and Linux %s" "${os}" "${xen_version}" "${version}")"
fi
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
if [ x"Xen ${xen_version}>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
title="$(gettext_printf "%s, with Xen hypervisor" "${os}")"
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab | sed "s/^/$submenu_indentation/"
fi
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})"
lmessage="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$xmessage" | grub_quote)'
if [ "\$grub_platform" = "pc" -o "\$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
${xen_loader} ${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} \${xen_rm_opts}
echo '$(echo "$lmessage" | grub_quote)'
${module_loader} ${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args}
EOF
if test -n "${initrd}" ; then
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
message="$(gettext_printf "Loading initial ramdisk ...")"
initrd_path=
for i in ${initrd}; do
initrd_path="${rel_dirname}/${i}"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
${module_loader} --nounzip $(echo $initrd_path)
EOF
done
fi
if ${xsm} && test -n "${xenpolicy}" ; then
message="$(gettext_printf "Loading XSM policy ...")"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
${module_loader} ${rel_dirname}/${xenpolicy}
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
linux_list=
for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* /boot/kernel-*; do
if grub_file_is_not_garbage "$i"; then
basename=$(basename $i)
version=$(echo $basename | sed -e "s,^[^0-9]*-,,g")
dirname=$(dirname $i)
config=
for j in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${j}" ; then
config="${j}"
break
fi
done
if (grep -qx "CONFIG_XEN_DOM0=y" "${config}" 2> /dev/null || grep -qx "CONFIG_XEN_PRIVILEGED_GUEST=y" "${config}" 2> /dev/null); then linux_list="$linux_list $i" ; fi
fi
done
if [ "x${linux_list}" = "x" ] ; then
exit 0
fi
file_is_not_xen_garbage () {
case "$1" in
*/xen-syms-*)
return 1;;
*/xenpolicy-*)
return 1;;
*/*.config)
return 1;;
*)
return 0;;
esac
}
xen_list=
for i in /boot/xen*; do
if grub_file_is_not_garbage "$i" && file_is_not_xen_garbage "$i" ; then xen_list="$xen_list $i" ; fi
done
prepare_boot_cache=
boot_device_id=
title_correction_code=
machine=`uname -m`
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
while [ "x${xen_list}" != "x" ] ; do
list="${linux_list}"
current_xen=`version_find_latest $xen_list`
xen_basename=`basename ${current_xen}`
xen_dirname=`dirname ${current_xen}`
rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname`
xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"`
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ "x$is_top_level" != xtrue ]; then
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
fi
if ($grub_file --is-arm64-efi $current_xen); then
xen_loader="xen_hypervisor"
module_loader="xen_module"
else
if ($grub_file --is-x86-multiboot2 $current_xen); then
xen_loader="multiboot2"
module_loader="module2"
else
xen_loader="multiboot"
module_loader="module"
fi
fi
initrd_early=
for i in ${GRUB_EARLY_INITRD_LINUX_STOCK} \
${GRUB_EARLY_INITRD_LINUX_CUSTOM}; do
if test -e "${xen_dirname}/${i}" ; then
initrd_early="${initrd_early} ${i}"
fi
done
while [ "x$list" != "x" ] ; do
linux=`version_find_latest $list`
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd_real=
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}" ; do
if test -e "${dirname}/${i}" ; then
initrd_real="$i"
break
fi
done
initrd=
if test -n "${initrd_early}" || test -n "${initrd_real}"; then
# Xen assumes the real initrd is the first module after the kernel.
# Additional (later) initrds can also be used for microcode update,
# with Xen option 'ucode=<scan|module number> (non-default anyway).
initrd="${initrd_real} ${initrd_early}"
initrd_display=
for i in ${initrd}; do
initrd_display="${initrd_display} ${dirname}/${i}"
done
gettext_printf "Found initrd image: %s\n" "$(echo $initrd_display)" >&2
fi
if test -z "${initrd_real}"; then
# "UUID=" magic is parsed by initrds. Since there's no initrd, it can't work here.
if [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ]; then
linux_root_device_thisversion=${GRUB_DEVICE}
else
linux_root_device_thisversion=PARTUUID=${GRUB_DEVICE_PARTUUID}
fi
fi
# The GRUB_DISABLE_SUBMENU option used to be different than others since it was
# mentioned in the documentation that has to be set to 'y' instead of 'true' to
# enable it. This caused a lot of confusion to users that set the option to 'y',
# 'yes' or 'true'. This was fixed but all of these values must be supported now.
if [ "x${GRUB_DISABLE_SUBMENU}" = xyes ] || [ "x${GRUB_DISABLE_SUBMENU}" = xy ]; then
GRUB_DISABLE_SUBMENU="true"
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xtrue ]; then
linux_entry "${OS}" "${version}" "${xen_version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
submenu_indentation="$grub_tab$grub_tab"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s (with Xen hypervisor)" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
is_top_level=false
fi
linux_entry "${OS}" "${version}" "${xen_version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
for supported_init in ${SUPPORTED_INITS}; do
init_path="${supported_init#*:}"
if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" "init-${supported_init%%:*}" \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
fi
done
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" recovery \
"single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}"
fi
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done
if [ x"$is_top_level" != xtrue ]; then
echo ' }'
fi
xen_list=`echo $xen_list | tr ' ' '\n' | fgrep -vx "$current_xen" | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
====================== sdb2/etc/grub.d/35_os-prober_proxy ======================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/os-prober' | /etc/grub.d/bin/grubcfg_proxy "-'Ubuntu 22.04.2 LTS (22.04) (on /dev/nvme0n1p2)'~a66d0cf0861c08121624955bd9ac165c~
-'Windows Boot Manager (on /dev/sda1)'~cbd93295488d2da2d28d9226c7b4a0d3~
+*
+#text
-'SUBMENU' as 'Advanced options for Ubuntu 22.04.2 LTS (22.04) (on /dev/nvme0n1p2)'{-'Advanced options for Ubuntu 22.04.2 LTS (22.04) (on /dev/nvme0n1p2)'/*, -'Advanced options for Ubuntu 22.04.2 LTS (22.04) (on /dev/nvme0n1p2)'/'Ubuntu (on /dev/nvme0n1p2)'~b4c446663ff43ed4c8e2f7302ca39b82~, -'Advanced options for Ubuntu 22.04.2 LTS (22.04) (on /dev/nvme0n1p2)'/'Ubuntu, with Linux 5.15.0-76-generic (on /dev/nvme0n1p2)'~b4c446663ff43ed4c8e2f7302ca39b82~, -'Advanced options for Ubuntu 22.04.2 LTS (22.04) (on /dev/nvme0n1p2)'/'Ubuntu, with Linux 5.15.0-76-generic (recovery mode) (on /dev/nvme0n1p2)'~db3bc62eaffed18d35d86233e725fd0c~}
"
======================= sdb2/etc/grub.d/40_custom_proxy ========================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/custom' | /etc/grub.d/bin/grubcfg_proxy "-*
-'Windows 10'~3c49191edc943481040fef1073cb5e80~
+#text
"
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi of
nvme0n1p2,
using the following options: kernel-purge nvme0n1p1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file restore-efi-backups
Blockers in case of suggested repair: __________________________________________
Please use this software in a live-session (live-CD or live-USB). This will enable this feature.
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Ubuntu 22.04.2 LTS (boot) entry (nvme0n1p1/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)
New paste
Poster:
Your name (30 characters max)
Syntax:
Expiration:
Approximate and not guaranteed
Content:
© 2023 Canonical Ltd. Ubuntu and Canonical are registered trademarks of Canonical Ltd.
Legal info
Go to the top of the pageHors ligne
#23 Le 13/07/2023, à 07:51
- iznobe
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
juste après une ligne qui dit : failed a propos du swap
c' est toujours aussi clair ...
plutot que de recopier l' erreur exacte ( ou prendre une photo , ou les 2 meme ) et nous la donner bien propre pour qu ' on puisse te repondre de façon certaine et rapide .
Dernière modification par iznobe (Le 13/07/2023, à 07:52)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#24 Le 13/07/2023, à 08:19
- Henri56
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
désolé de ne pas etre tres clair , voici une photo ou le démarrage sue le nvme s'arrete :
https://www.cjoint.com/c/MGnhttNzCge
Dernière modification par Henri56 (Le 13/07/2023, à 08:20)
Hors ligne
#25 Le 13/07/2023, à 08:42
- geole
Re : transférer ubuntu 22.04 d'un ancien dd vers ssd (résolu)
Bonjour
lorsque ton ordinateur plante, tu appuies sur la touche entrée pour avoir la main puis tu vas modifier le fichier /etc/fstab
nano /etc/fstabTu te positionnes sur cette ligne
/swapfile none swap sw 0 0et tu la modifies pour qu'elle devienne
#/swapfile none swap sw 0 0et tu rebootes, cela devrait marcher.
Lorsque cela aura booté, afin de faire le point, tu donnes
LANG=C free -hls -ls / | grep -v drwxAjout
cat /etc/initramfs-tools/conf.d/resumeDernière modification par geole (Le 13/07/2023, à 09:10)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne