#26 Le 12/06/2023, à 08:51
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
Salut Nico,
du coup il faut saisir quoi comme commande pour faire cette vérification ?
Hors ligne
#27 Le 12/06/2023, à 09:01
- xubu1957
Re : [Résolu] Problème installation clé wifi N600
Bonjour,
sudo -r modprobe 8812au Corrigée plus bas, au #30 :
sudo modprobe -r 8812au
sudo modprobe 8812au
sudo ip link set wlx00e04c870000 up
sudo dmesg | tail -50
et Lecture conseillée > memento des balises code.
Dernière modification par xubu1957 (Le 12/06/2023, à 10:37)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#28 Le 12/06/2023, à 10:14
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
atelier@BOB:~$ sudo -r modprobe 8812au
[sudo] Mot de passe de atelier :
sudo: 8812au : commande introuvable
Hors ligne
#29 Le 12/06/2023, à 10:34
- xubu1957
Re : [Résolu] Problème installation clé wifi N600
Quatre commandes indiquées, un seul retour fourni.
On n'avancera pas vite !
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#30 Le 12/06/2023, à 10:34
- alh54
Re : [Résolu] Problème installation clé wifi N600
sudo -r modprobe 8812au
C'est plutôt
sudo modprobe -r 8812au
Et tu continues la suite du #27
Hors ligne
#31 Le 12/06/2023, à 13:25
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
Désolé, je pensais, à tort, que les commandes étaient séquentielles et que si la prémière échouait les autres étaient inutiles....
Aucune réaction :
atelier@BOB:~$ sudo modprobe -r 8812au
atelier@BOB:~$
Aucune réaction non plus :
atelier@BOB:~$ sudo modprobe 8812au
atelier@BOB:~$
atelier@BOB:~$ sudo ip link set wlx00e04c870000 up
RTNETLINK answers: Operation not permitted
atelier@BOB:~$ sudo dmesg | tail -50
[16900.743819] Hardware name: Acer Aspire XC600/Aspire XC600, BIOS P11-A0 08/10/2012
[16900.743821] Call Trace:
[16900.743823] <TASK>
[16900.743827] show_stack+0x52/0x69
[16900.743832] dump_stack_lvl+0x49/0x6d
[16900.743837] dump_stack+0x10/0x18
[16900.743838] ubsan_epilogue+0x9/0x3a
[16900.743842] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[16900.743846] ? _rtw_malloc+0x33/0x3d [8812au]
[16900.743885] rtw_drv_init+0x322/0x4d4 [8812au]
[16900.743922] usb_probe_interface+0xee/0x2c0
[16900.743927] really_probe+0x1e4/0x3c0
[16900.743932] __driver_probe_device+0x12a/0x1b0
[16900.743934] driver_probe_device+0x23/0xd0
[16900.743937] __driver_attach+0x10f/0x220
[16900.743940] ? __device_attach_driver+0x160/0x160
[16900.743943] bus_for_each_dev+0x83/0xe0
[16900.743949] driver_attach+0x1e/0x30
[16900.743951] bus_add_driver+0x187/0x230
[16900.743955] driver_register+0x95/0x110
[16900.743957] usb_register_driver+0x8d/0x140
[16900.743960] ? 0xffffffffc0a76000
[16900.743962] rtw_drv_entry+0x32/0x1000 [8812au]
[16900.743981] do_one_initcall+0x49/0x230
[16900.743984] ? kmem_cache_alloc_trace+0x1a6/0x330
[16900.743988] do_init_module+0x52/0x220
[16900.743993] load_module+0xb56/0xd40
[16900.743996] ? security_kernel_post_read_file+0x5c/0x80
[16900.744001] ? kernel_read_file+0x245/0x2a0
[16900.744006] __do_sys_finit_module+0xcc/0x150
[16900.744008] ? __do_sys_finit_module+0xcc/0x150
[16900.744011] __x64_sys_finit_module+0x18/0x30
[16900.744013] do_syscall_64+0x5c/0x90
[16900.744017] ? exit_to_user_mode_prepare+0x3b/0xd0
[16900.744019] ? syscall_exit_to_user_mode+0x2a/0x50
[16900.744023] ? do_syscall_64+0x69/0x90
[16900.744026] ? do_syscall_64+0x69/0x90
[16900.744029] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[16900.744033] RIP: 0033:0x7ff67611ea3d
[16900.744035] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48
[16900.744037] RSP: 002b:00007ffd1b178748 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[16900.744040] RAX: ffffffffffffffda RBX: 000055da32147040 RCX: 00007ff67611ea3d
[16900.744041] RDX: 0000000000000000 RSI: 000055da31673cd2 RDI: 0000000000000004
[16900.744042] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002
[16900.744043] R10: 0000000000000004 R11: 0000000000000246 R12: 000055da31673cd2
[16900.744044] R13: 000055da32147170 R14: 000055da3213f550 R15: 000055da3213fc10
[16900.744047] </TASK>
[16900.744048] ================================================================================
[16900.875196] usbcore: registered new interface driver rtl8812au
[16900.878644] rtl8812au 1-1.2:1.0 wlx00e04c870000: renamed from wlan0
Hors ligne
#32 Le 12/06/2023, à 13:40
- xubu1957
Re : [Résolu] Problème installation clé wifi N600
Montre aussi :
modinfo 8812au
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#33 Le 12/06/2023, à 13:48
- NicoApi73
Re : [Résolu] Problème installation clé wifi N600
Bonjour,
C'est moi qui ai fait une erreur en plaçant mal le curseur quand j'ai introduit l'option -r au mauvais endroit (erreur de position de curseur!)
On voit qu'il y a une erreur qui est remonté et les 50 lignes ne sont pas suffisantes.
En plus du #32, on va recommencer avec plus de lignes :
sudo modprobe -r 8812au
sudo modprobe 8812au
sudo ip link set wlx00e04c870000 up
sudo dmesg | tail -75
Hors ligne
#34 Le 12/06/2023, à 14:02
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
atelier@BOB:~$ modinfo 8812au
filename: /lib/modules/5.19.0-43-generic/kernel/drivers/net/wireless/8812au.ko
version: v4.2.2_7502.20130517
author: Realtek Semiconductor Corp.
description: Realtek Wireless Lan Driver
license: GPL
srcversion: 71DF93FBDC9C2441438F153
alias: usb:v7392pA813d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392pA812d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392pA811d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB32d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3314d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p9052d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v056Ep4007d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0411p0242d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8822d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp0821d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp0811d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392pA822d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2357p011Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2357p0103d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2357p010Dd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2357p0101d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v20F4p805Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB30d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3316d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3315d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3313d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p330Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1740p0100d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13B1p003Fd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1058p0632d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0E66p0022d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0074d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B05p17D2d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB30d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07B8p8812d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0789p016Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0586p3426d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp1106d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04BBp0952d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0411p025Dd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0409p0408d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDApA811d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp881Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp881Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp881Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8812d*dc*dsc*dp*ic*isc*ip*in*
depends: cfg80211
retpoline: Y
name: 8812au
vermagic: 5.19.0-43-generic SMP preempt mod_unload modversions
parm: rtw_ips_mode:The default IPS mode (int)
parm: rtw_regulatory_id:int
parm: ifname:The default name to allocate for first interface (charp)
parm: if2name:The default name to allocate for second interface (charp)
parm: rtw_initmac:charp
parm: rtw_channel_plan:int
parm: rtw_chip_version:int
parm: rtw_rfintfs:int
parm: rtw_lbkmode:int
parm: rtw_network_mode:int
parm: rtw_channel:int
parm: rtw_mp_mode:int
parm: rtw_wmm_enable:int
parm: rtw_vrtl_carrier_sense:int
parm: rtw_vcs_type:int
parm: rtw_busy_thresh:int
parm: rtw_ht_enable:int
parm: rtw_bw_mode:int
parm: rtw_ampdu_enable:int
parm: rtw_rx_stbc:int
parm: rtw_ampdu_amsdu:int
parm: rtw_vht_enable:int
parm: rtw_lowrate_two_xmit:int
parm: rtw_rf_config:int
parm: rtw_power_mgnt:int
parm: rtw_smart_ps:int
parm: rtw_low_power:int
parm: rtw_wifi_spec:int
parm: rtw_antdiv_cfg:int
parm: rtw_antdiv_type:int
parm: rtw_enusbss:int
parm: rtw_hwpdn_mode:int
parm: rtw_hwpwrp_detect:int
parm: rtw_hw_wps_pbc:int
parm: rtw_max_roaming_times:The max roaming times to try (uint)
parm: rtw_mc2u_disable:int
parm: rtw_80211d:Enable 802.11d mechanism (int)
parm: rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint)
parm: enable_wowlan:1 to enable WOWlan. default 0 (int)
Hors ligne
#35 Le 12/06/2023, à 14:04
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
atelier@BOB:~$ sudo modprobe -r 8812au
[sudo] Mot de passe de atelier :
atelier@BOB:~$
atelier@BOB:~$ sudo modprobe 8812au
atelier@BOB:~$
atelier@BOB:~$ sudo ip link set wlx00e04c870000 up
RTNETLINK answers: Operation not permitted
atelier@BOB:~$ sudo dmesg | tail -75
exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[17712.402524] audit: type=1107 audit(1686573370.910:214): pid=673 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/hostname1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.151" pid=4628 label="snap.thunderbird.thunderbird" peer_pid=9559 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[17712.402528] audit: type=1107 audit(1686573370.910:215): pid=673 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/hostname1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.151" pid=4628 label="snap.thunderbird.thunderbird" peer_pid=9559 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[17712.402533] audit: type=1107 audit(1686573370.910:216): pid=673 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/hostname1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.151" pid=4628 label="snap.thunderbird.thunderbird" peer_pid=9559 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[17712.402537] audit: type=1107 audit(1686573370.910:217): pid=673 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/hostname1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.151" pid=4628 label="snap.thunderbird.thunderbird" peer_pid=9559 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[17712.402543] audit: type=1107 audit(1686573370.910:218): pid=673 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/hostname1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.151" pid=4628 label="snap.thunderbird.thunderbird" peer_pid=9559 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[17717.876172] kauditd_printk_skb: 1 callbacks suppressed
[17717.876176] audit: type=1400 audit(1686573376.382:220): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-oosplash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_9e896725fc820fb20781c579bd6f8a" pid=9573 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[17717.876184] audit: type=1400 audit(1686573376.382:221): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-oosplash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_9e896725fc820fb20781c579bd6f8a" pid=9573 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[17717.876188] audit: type=1400 audit(1686573376.382:222): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-oosplash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_9e896725fc820fb20781c579bd6f8a" pid=9573 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[17717.876873] audit: type=1400 audit(1686573376.382:223): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-oosplash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_9e896725fc820fb20781c579bd6f8a" pid=9573 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[17717.876881] audit: type=1400 audit(1686573376.382:224): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-oosplash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_9e896725fc820fb20781c579bd6f8a" pid=9573 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[19305.491288] usbcore: deregistering interface driver rtl8812au
[19305.617532] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[19325.903950] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[19325.904178] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[19325.939271] ================================================================================
[19325.939278] UBSAN: array-index-out-of-bounds in /home/atelier/rtl8812au/os_dep/usb_intf.c:397:26
[19325.939281] index 3 is out of range for type 'int [3]'
[19325.939283] CPU: 0 PID: 10546 Comm: modprobe Tainted: G OE 5.19.0-43-generic #44~22.04.1-Ubuntu
[19325.939286] Hardware name: Acer Aspire XC600/Aspire XC600, BIOS P11-A0 08/10/2012
[19325.939287] Call Trace:
[19325.939289] <TASK>
[19325.939291] show_stack+0x52/0x69
[19325.939296] dump_stack_lvl+0x49/0x6d
[19325.939300] dump_stack+0x10/0x18
[19325.939302] ubsan_epilogue+0x9/0x3a
[19325.939306] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[19325.939309] ? _rtw_malloc+0x33/0x3d [8812au]
[19325.939343] rtw_drv_init+0x322/0x4d4 [8812au]
[19325.939370] usb_probe_interface+0xee/0x2c0
[19325.939373] really_probe+0x1e4/0x3c0
[19325.939375] __driver_probe_device+0x12a/0x1b0
[19325.939377] driver_probe_device+0x23/0xd0
[19325.939379] __driver_attach+0x10f/0x220
[19325.939381] ? __device_attach_driver+0x160/0x160
[19325.939383] bus_for_each_dev+0x83/0xe0
[19325.939386] driver_attach+0x1e/0x30
[19325.939388] bus_add_driver+0x187/0x230
[19325.939390] driver_register+0x95/0x110
[19325.939392] usb_register_driver+0x8d/0x140
[19325.939394] ? 0xffffffffc0711000
[19325.939396] rtw_drv_entry+0x32/0x1000 [8812au]
[19325.939414] do_one_initcall+0x49/0x230
[19325.939417] ? kmem_cache_alloc_trace+0x1a6/0x330
[19325.939421] do_init_module+0x52/0x220
[19325.939424] load_module+0xb56/0xd40
[19325.939426] ? security_kernel_post_read_file+0x5c/0x80
[19325.939429] ? kernel_read_file+0x245/0x2a0
[19325.939432] __do_sys_finit_module+0xcc/0x150
[19325.939434] ? __do_sys_finit_module+0xcc/0x150
[19325.939437] __x64_sys_finit_module+0x18/0x30
[19325.939439] do_syscall_64+0x5c/0x90
[19325.939442] ? ksys_mmap_pgoff+0x121/0x260
[19325.939445] ? exit_to_user_mode_prepare+0x3b/0xd0
[19325.939447] ? syscall_exit_to_user_mode+0x2a/0x50
[19325.939450] ? do_syscall_64+0x69/0x90
[19325.939452] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[19325.939455] RIP: 0033:0x7f5db4f1ea3d
[19325.939457] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48
[19325.939459] RSP: 002b:00007ffe1247d628 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[19325.939461] RAX: ffffffffffffffda RBX: 0000559b775b8040 RCX: 00007f5db4f1ea3d
[19325.939463] RDX: 0000000000000000 RSI: 0000559b76325cd2 RDI: 0000000000000004
[19325.939464] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002
[19325.939465] R10: 0000000000000004 R11: 0000000000000246 R12: 0000559b76325cd2
[19325.939466] R13: 0000559b775b8170 R14: 0000559b775b0550 R15: 0000559b775b0c10
[19325.939468] </TASK>
[19325.939469] ================================================================================
[19326.068484] usbcore: registered new interface driver rtl8812au
[19326.072173] rtl8812au 1-1.2:1.0 wlx00e04c870000: renamed from wlan0
atelier@BOB:~$
Hors ligne
#36 Le 13/06/2023, à 06:07
- NicoApi73
Re : [Résolu] Problème installation clé wifi N600
Bonjour,
Que donne
bootctl
Hors ligne
#37 Le 13/06/2023, à 08:46
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
atelier@BOB:~$ bootctl
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
lines 1-23
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
lines 1-23...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
lines 1-24...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
lines 1-25
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
lines 1-25...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
lines 1-26
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
lines 1-26...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
lines 1-27...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
lines 1-29...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
lines 1-30...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
lines 1-31...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
lines 1-32...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
lines 1-33
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
lines 1-33...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
lines 1-34...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
lines 1-35...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
lines 1-36...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
lines 1-37...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
lines 1-38
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
lines 1-38...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
lines 1-39
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
lines 1-39...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
lines 1-40...skipping...
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
~
lines 1-40/40 (END)
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
~
lines 1-40/40 (END)
Failed to read "/boot/efi/EFI/systemd": Permission non accordée
Failed to open "/boot/efi/loader/loader.conf": Permission non accordée
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
lines 1-40/40 (END)
Hors ligne
#38 Le 13/06/2023, à 13:01
- iznobe
Re : [Résolu] Problème installation clé wifi N600
Bonjour , donne plutôt le retour de
sudo bootctl | cat
ca sera bien plus lisible que le retour ci-dessus .
Dernière modification par iznobe (Le 13/06/2023, à 13:02)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#39 Le 13/06/2023, à 13:04
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
atelier@BOB:~$ sudo bootctl | cat
[sudo] Mot de passe de atelier :
systemd-boot not installed in ESP.
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: user
TPM2 Support: no
Boot into FW: supported
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
File: └─/EFI/BOOT/BOOTX64.EFI
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b
File: └─/EFI/ubuntu/shimx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/26e3bde1-c1ec-4feb-b96e-a6dc3500507b)
0 entries, no entry could be determined as default.
Hors ligne
#40 Le 13/06/2023, à 13:16
- iznobe
Re : [Résolu] Problème installation clé wifi N600
ok , en relisant du début la discussion , je m' aperçois que personne a vérifier qu ' on est bien en présence de la bonne puce ...
en fait 2 clés boulanger N600 peuvent très bien avoir un chipset différent et donc le pilote a installer ne sera pas le même pour chacune d' elle , tout dépend du chipset à l' interieur .
Alors peux tu commencer par donner :
lsusb | grep -i wlan
et celle-ci c ' est pour vérifier que les paquets pour la compilation ( sens large ) sont bien installés :
sudo apt install --reinstall git build-essential dkms
Dernière modification par iznobe (Le 13/06/2023, à 13:17)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#41 Le 13/06/2023, à 16:01
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
Vous aurez compris je suis assez ignorant sur tout ce que l'on fait depuis le début, mais je vois afficher RTL8811AU et depuis le début on est sur RTL8812AU :
atelier@BOB:~$ lsusb | grep -i wlan
Bus 001 Device 004: ID 0bda:a811 Realtek Semiconductor Corp. RTL8811AU 802.11a/b/g/n/ac WLAN Adapter
atelier@BOB:~$ sudo apt install --reinstall git build-essential dkms
[sudo] Mot de passe de atelier :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 3 réinstallés, 0 à enlever et 20 non mis à jour.
Il est nécessaire de prendre 3241 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de :1 http://fr.archive.ubuntu.com/ubuntu jammy-updates/main amd64 dkms all 2.8.7-2ubuntu2.1 [70,0 kB]
Réception de :2 http://fr.archive.ubuntu.com/ubuntu jammy/main amd64 build-essential amd64 12.9ubuntu3 [4744 B]
Réception de :3 http://fr.archive.ubuntu.com/ubuntu jammy-updates/main amd64 git amd64 1:2.34.1-1ubuntu1.9 [3166 kB]
3241 ko réceptionnés en 0s (10,3 Mo/s)
(Lecture de la base de données... 196818 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../dkms_2.8.7-2ubuntu2.1_all.deb ...
Dépaquetage de dkms (2.8.7-2ubuntu2.1) sur (2.8.7-2ubuntu2.1) ...
Préparation du dépaquetage de .../build-essential_12.9ubuntu3_amd64.deb ...
Dépaquetage de build-essential (12.9ubuntu3) sur (12.9ubuntu3) ...
Préparation du dépaquetage de .../git_1%3a2.34.1-1ubuntu1.9_amd64.deb ...
Dépaquetage de git (1:2.34.1-1ubuntu1.9) sur (1:2.34.1-1ubuntu1.9) ...
Paramétrage de dkms (2.8.7-2ubuntu2.1) ...
Paramétrage de git (1:2.34.1-1ubuntu1.9) ...
Paramétrage de build-essential (12.9ubuntu3) ...
Traitement des actions différées (« triggers ») pour man-db (2.10.2-1) ...
Dernière modification par OyoooyO (Le 13/06/2023, à 16:07)
Hors ligne
#42 Le 13/06/2023, à 16:46
- xubu1957
Re : [Résolu] Problème installation clé wifi N600
Bonjour,
Pour info > linux-hardware.org/?id=usb:0bda-a811
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#43 Le 13/06/2023, à 18:05
- iznobe
Re : [Résolu] Problème installation clé wifi N600
on est bien sur la même puce , et les paquets étaient déjà bien installés .
Du coup je ne comprends pas trop pourquoi ca ne va pas , mais le spécialiste de la question c ' est NicoApi73 .
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#44 Le 13/06/2023, à 19:19
- NicoApi73
Re : [Résolu] Problème installation clé wifi N600
Bonsoir,
La chose inhabituelle que l'on voit c'est :
[19325.903950] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[19325.904178] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[19325.939271] ================================================================================
[19325.939278] UBSAN: array-index-out-of-bounds in /home/atelier/rtl8812au/os_dep/usb_intf.c:397:26
[19325.939281] index 3 is out of range for type 'int [3]'
[19325.939283] CPU: 0 PID: 10546 Comm: modprobe Tainted: G OE 5.19.0-43-generic #44~22.04.1-Ubuntu
[19325.939286] Hardware name: Acer Aspire XC600/Aspire XC600, BIOS P11-A0 08/10/2012
Je ne sais pas dire si c'est ça qui pose problème.
Comme on est sur une 22.04, on peut essayer de réinstaller un noyau 5.15, ou essayer un autre pilote. Je n'ai pas le temps pour retrouver les commandes ce soir. J'essaierai de m'en occuper soit tard, soit demain. Désolé pour le manque de temps.
Hors ligne
#45 Le 13/06/2023, à 21:36
- iznobe
Re : [Résolu] Problème installation clé wifi N600
cette ligne :
UBSAN: array-index-out-of-bounds in /home/atelier/rtl8812au/os_dep/usb_intf.c:397:26
si je decode a peu pres , voudrait dire qu ' il y aurait un soucis dans le script des dépendances du pilote au niveau de l' USB ?
D ' apres une recherche rapide sur le net avec : UBSAN: array-index-out-of-bounds , ca prouve que c' est bien un bug du code . ( j ' ai jeté un oeil vite fait a la ligne 397 du fichier en question , mais pas le niveau et faudrait tout épluché , y a des variables dans tous les sens )
si tu as plusieurs types de port USB , essaie de faire un essai en branchant la clé sur un autre type de port USB , sait on jamais ( et fournis bien tous les retours de commandes de la construction du pilote stp ) .
A priori , tu ne disposes que de port USB2 ... essaie un autre port USB dans ce cas , des fois que celui-ci ait une particularité .
Dernière modification par iznobe (Le 13/06/2023, à 22:08)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#46 Le 13/06/2023, à 21:48
- xubu1957
Re : [Résolu] Problème installation clé wifi N600
@Nico
Pour info un changement de pilote
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#47 Le 14/06/2023, à 08:16
- NicoApi73
Re : [Résolu] Problème installation clé wifi N600
Bonjour,
Merci xubu, c'est celui que je cherchais (aircrack-ng).
cd
rm -rf rtl8812au
sudo modprobe -r 8812au
sudo rm /lib/modules/$(uname -r)/kernel/drivers/net/wireless/8812au.ko
git clone https://github.com/aircrack-ng/rtl8812au
cd rtl8812au
make
sudo make install
sudo modprobe 88XXau
Hors ligne
#48 Le 14/06/2023, à 08:37
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
cette ligne :
UBSAN: array-index-out-of-bounds in /home/atelier/rtl8812au/os_dep/usb_intf.c:397:26
si je decode a peu pres , voudrait dire qu ' il y aurait un soucis dans le script des dépendances du pilote au niveau de l' USB ?
D ' apres une recherche rapide sur le net avec : UBSAN: array-index-out-of-bounds , ca prouve que c' est bien un bug du code . ( j ' ai jeté un oeil vite fait a la ligne 397 du fichier en question , mais pas le niveau et faudrait tout épluché , y a des variables dans tous les sens )
si tu as plusieurs types de port USB , essaie de faire un essai en branchant la clé sur un autre type de port USB , sait on jamais ( et fournis bien tous les retours de commandes de la construction du pilote stp ) .
A priori , tu ne disposes que de port USB2 ... essaie un autre port USB dans ce cas , des fois que celui-ci ait une particularité .
J'ai essayé tous mes ports, sans succès.
Hors ligne
#49 Le 14/06/2023, à 08:40
- OyoooyO
Re : [Résolu] Problème installation clé wifi N600
Bonjour,
Merci xubu, c'est celui que je cherchais (aircrack-ng).
cd rm -rf rtl8812au sudo modprobe -r 8812au sudo rm /lib/modules/$(uname -r)/kernel/drivers/net/wireless/8812au.ko git clone https://github.com/aircrack-ng/rtl8812au cd rtl8812au make sudo make install sudo modprobe 88XXau
Bonjour, veux tu que j'essaie ces lignes ?
Hors ligne
#50 Le 14/06/2023, à 08:49
- xubu1957
Re : [Résolu] Problème installation clé wifi N600
Tu passes les commandes une à une, en fournissant les retours.
Et accessoirement :
(...)
3. Utilisez la citation avec modération : il ne sert à rien de citer l'intégralité du post précédent.
(...)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne