#1 Le 03/01/2023, à 15:30
- FrancisFDZ
[Résolu] Message bizarre au login
Bonjour,
Quand j'ouvre une session de "terminal", il affiche
discover_other_daemon: 1francis@francis-G41M-Combo:~$La première commande s'exécute correctement et le message ne s'affiche plus jusqu'à la prochaine utilisation de "terminal". D'après mes premières recherches, il devrais s'agir du lancement d'un doublon concernant un daemon.
Ce comportement n'est pas bloquant, mais quand même anormal, je voudrais retrouver un "login" propre.
Précisions :
discover_other_daemon: 1francis@francis-G41M-Combo:~$ lsb_release
LSB Version: core-11.2ubuntu1-noarch:printing-11.2ubuntu1-noarch:security-11.2ubuntu1-noarch
francis@francis-G41M-Combo:~$francis@francis-G41M-Combo:~$ uname -a
Linux francis-G41M-Combo 5.19.0-26-generic #27-Ubuntu SMP PREEMPT_DYNAMIC Wed Nov 23 20:44:15 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
francis@francis-G41M-Combo:~$ Dernière modification par FrancisFDZ (Le 10/01/2023, à 19:35)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#2 Le 03/01/2023, à 15:48
- inbox
Re : [Résolu] Message bizarre au login
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#3 Le 03/01/2023, à 16:13
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Je ne suis pas sur d'avoir la réponde complète
discover_other_daemon: 1francis@francis-G41M-Combo:~$ loginctl session-status
1 - francis (1000)
Since: Tue 2023-01-03 14:36:07 CET; 1h 32min ago
Leader: 1245 (gdm-session-wor)
Seat: seat0; vc2
TTY: tty2
Service: gdm-autologin; type x11; class user
State: active
Unit: session-1.scope
├─1245 "gdm-session-worker [pam/gdm-autologin]"
├─1371 /usr/libexec/gdm-x-session --run-script "env GNOME_SHE>
├─1373 /usr/lib/xorg/Xorg vt2 -displayfd 3 -auth /run/user/10>
└─1387 /usr/libexec/gnome-session-binary --session=ubuntu
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-upd>
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-upd>
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-upd>
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-upd>
janv. 03 14:36:29 francis-G41M-Combo gdm-autologin][1245]: accountsservice: Act>
janv. 03 14:36:29 francis-G41M-Combo gdm-autologin][1245]: accountsservice: Act>
janv. 03 14:36:29 francis-G41M-Combo gdm-autologin][1245]: accountsservice: Act>
janv. 03 14:36:30 francis-G41M-Combo gnome-session[1457]: gnome-session-check-a>
janv. 03 14:36:30 francis-G41M-Combo gnome-session[1475]: libEGL warning: DRI2:>
janv. 03 14:36:30 francis-G41M-Combo gnome-session[1457]: gnome-session-check-a>
lines 1-23Mais je pense qu'on doit déjà pouvoir en tirer quelque chose
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#4 Le 03/01/2023, à 16:15
- FrancisFDZ
Re : [Résolu] Message bizarre au login
J'ai réussi à avoir la réponse complète, après avoir redirigé la commande vers un fichier texte :
1 - francis (1000)
Since: Tue 2023-01-03 14:36:07 CET; 1h 37min ago
Leader: 1245 (gdm-session-wor)
Seat: seat0; vc2
TTY: tty2
Service: gdm-autologin; type x11; class user
State: active
Unit: session-1.scope
├─1245 "gdm-session-worker [pam/gdm-autologin]"
├─1371 /usr/libexec/gdm-x-session --run-script "env GNOME_SHELL_SESSION_MODE=ubuntu /usr/bin/gnome-session --session=ubuntu"
├─1373 /usr/lib/xorg/Xorg vt2 -displayfd 3 -auth /run/user/1000/gdm/Xauthority -nolisten tcp -background none -noreset -keeptty -novtswitch -verbose 7 -core
└─1387 /usr/libexec/gnome-session-binary --session=ubuntu
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-update-activation-environment: setting GDMSESSION=ubuntu
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-update-activation-environment: setting LC_NUMERIC=fr_FR.UTF-8
janv. 03 14:36:29 francis-G41M-Combo /usr/libexec/gdm-x-session[1447]: dbus-update-activation-environment: setting _=/usr/bin/dbus-update-activation-environment
janv. 03 14:36:29 francis-G41M-Combo gdm-autologin][1245]: accountsservice: ActUserManager: sending user-changed signal for user francis
janv. 03 14:36:29 francis-G41M-Combo gdm-autologin][1245]: accountsservice: ActUserManager: sent user-changed signal for user francis
janv. 03 14:36:29 francis-G41M-Combo gdm-autologin][1245]: accountsservice: ActUserManager: updating user francis
janv. 03 14:36:30 francis-G41M-Combo gnome-session[1457]: gnome-session-check-accelerated: GL Helper exited with code 512
janv. 03 14:36:30 francis-G41M-Combo gnome-session[1475]: libEGL warning: DRI2: failed to authenticate
janv. 03 14:36:30 francis-G41M-Combo gnome-session[1457]: gnome-session-check-accelerated: GLES Helper exited with code 512-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#5 Le 03/01/2023, à 16:40
- inbox
Re : [Résolu] Message bizarre au login
Que donne ceci ?
sudo dmesgUn problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#6 Le 04/01/2023, à 11:06
- FrancisFDZ
Re : [Résolu] Message bizarre au login
D'après mes première recherches, l'origine du problème pourrait être une ligne en doublon dans un fichier de configuration (gdm?) mais je n'ai pas réussi à déterminer quel fichier, ni à fortiori quelle ligne.
[Edit] Suite à l'installation d'une carte graphique NVidia, je suis passé de Wayland à X11, je pense que ce détail a son importance
J'ai d'autres sessions de linux installées (dont Rolling Rhino, équivalent actuel à Lunar Lobster) qui n'ont pas ce problème [/Edit]
[Edit2] @inbox : je ne suis pas pour l'instant devant mon fixe, victime de ce dysfonctionnement, dès que j'y serais je lancerais le dmesg (qui sera alors d'autant plus intéressant qu'il sera vraisemblablement la première commende lancée lors de cette session) |/Edit2]
Dernière modification par FrancisFDZ (Le 04/01/2023, à 11:39)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#7 Le 04/01/2023, à 11:38
- inbox
Re : [Résolu] Message bizarre au login
Regarde dans :
/etc/gdm3/custom.confPlus particulièrement la section [daemon].
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#8 Le 04/01/2023, à 11:41
- FrancisFDZ
Re : [Résolu] Message bizarre au login
inbox a écrit :
Regarde dans :
/etc/gdm3/custom.confPlus particulièrement la section [daemon].
Excellente suggestion AMHA : ce sera la deuxième commande de cette session !
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#9 Le 04/01/2023, à 13:37
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Bon, nous y voila :
dmesg : ç'est long !
discover_other_daemon: 1francis@francis-G41M-Combo:~$ sudo dmesg
[sudo] Mot de passe de francis :
[ 0.000000] Linux version 5.19.0-26-generic (buildd@lcy02-amd64-064) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.2.0-3ubuntu1) 12.2.0, GNU ld (GNU Binutils for Ubuntu) 2.39) #27-Ubuntu SMP PREEMPT_DYNAMIC Wed Nov 23 20:44:15 UTC 2022 (Ubuntu 5.19.0-26.27-generic 5.19.7)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-26-generic root=UUID=c1cce0bb-2291-4afc-bfba-425bbb8983ad ro recovery nomodeset dis_ucode_ldr
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1520
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G41M-Combo/G41M-Combo, BIOS FB 10/25/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2762.782 MHz processor
[ 0.001760] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001765] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001775] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.002757] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003259] total RAM covered: 8191M
[ 0.003553] Found optimal setting for mtrr clean up
[ 0.003554] gran_size: 64K chunk_size: 2M num_reg: 5 lose cover RAM: 0G
[ 0.004681] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[ 0.004693] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[ 0.013708] found SMP MP-table at [mem 0x000f52c0-0x000f52cf]
[ 0.014347] RAMDISK: [mem 0x2fcbd000-0x33e55fff]
[ 0.014361] ACPI: Early table checksum verification disabled
[ 0.014367] ACPI: RSDP 0x00000000000F6D50 000014 (v00 GBT )
[ 0.014375] ACPI: RSDT 0x00000000BFEE3040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.014384] ACPI: FACP 0x00000000BFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.014395] ACPI: DSDT 0x00000000BFEE3180 00423A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.014402] ACPI: FACS 0x00000000BFEE0000 000040
[ 0.014408] ACPI: MSDM 0x00000000BFEE7500 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.014415] ACPI: HPET 0x00000000BFEE75C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.014422] ACPI: MCFG 0x00000000BFEE7640 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.014428] ACPI: TAMG 0x00000000BFEE7680 006352 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.014435] ACPI: APIC 0x00000000BFEE7400 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.014441] ACPI: SSDT 0x00000000BFEEE320 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.014447] ACPI: Reserving FACP table memory at [mem 0xbfee30c0-0xbfee3133]
[ 0.014450] ACPI: Reserving DSDT table memory at [mem 0xbfee3180-0xbfee73b9]
[ 0.014452] ACPI: Reserving FACS table memory at [mem 0xbfee0000-0xbfee003f]
[ 0.014454] ACPI: Reserving MSDM table memory at [mem 0xbfee7500-0xbfee7554]
[ 0.014456] ACPI: Reserving HPET table memory at [mem 0xbfee75c0-0xbfee75f7]
[ 0.014458] ACPI: Reserving MCFG table memory at [mem 0xbfee7640-0xbfee767b]
[ 0.014459] ACPI: Reserving TAMG table memory at [mem 0xbfee7680-0xbfeed9d1]
[ 0.014461] ACPI: Reserving APIC table memory at [mem 0xbfee7400-0xbfee7483]
[ 0.014463] ACPI: Reserving SSDT table memory at [mem 0xbfeee320-0xbfeee6ca]
[ 0.014634] No NUMA configuration found
[ 0.014635] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.014652] NODE_DATA(0) allocated [mem 0x23ffd2000-0x23fffcfff]
[ 0.015348] Zone ranges:
[ 0.015349] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015352] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015355] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.015358] Device empty
[ 0.015360] Movable zone start for each node
[ 0.015365] Early memory node ranges
[ 0.015366] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.015368] node 0: [mem 0x0000000000100000-0x00000000bfedffff]
[ 0.015371] node 0: [mem 0x0000000100000000-0x000000023fffffff]
[ 0.015375] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[ 0.015384] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.015441] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.064307] On node 0, zone Normal: 288 pages in unavailable ranges
[ 0.064471] ACPI: PM-Timer IO Port: 0x408
[ 0.064489] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.064494] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.064496] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.064498] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.064511] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.064516] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.064520] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.064528] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.064530] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.064539] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.064563] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.064566] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.064568] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.064570] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.064573] PM: hibernation: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
[ 0.064574] PM: hibernation: Registered nosave memory: [mem 0xbfee3000-0xbfeeffff]
[ 0.064576] PM: hibernation: Registered nosave memory: [mem 0xbfef0000-0xbfefffff]
[ 0.064577] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
[ 0.064579] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.064580] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.064582] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.064585] [mem 0xbff00000-0xdfffffff] available for PCI devices
[ 0.064587] Booting paravirtualized kernel on bare hardware
[ 0.064592] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.064605] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.065296] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[ 0.065306] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[ 0.065312] pcpu-alloc: [0] 0 1 2 3
[ 0.065365] Fallback order for Node 0: 0
[ 0.065371] Built 1 zonelists, mobility grouping on. Total pages: 2063844
[ 0.065374] Policy zone: Normal
[ 0.065376] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-26-generic root=UUID=c1cce0bb-2291-4afc-bfba-425bbb8983ad ro recovery nomodeset dis_ucode_ldr
[ 0.065500] Booted with the nomodeset parameter. Only the system framebuffer will be available
[ 0.065536] Unknown kernel command line parameters "recovery dis_ucode_ldr BOOT_IMAGE=/boot/vmlinuz-5.19.0-26-generic", will be passed to user space.
[ 0.067431] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.068403] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.068500] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.173289] Memory: 8062996K/8387064K available (18440K kernel code, 4054K rwdata, 11244K rodata, 3148K init, 4924K bss, 323808K reserved, 0K cma-reserved)
[ 0.173866] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.173901] Kernel/User page tables isolation: enabled
[ 0.173936] ftrace: allocating 51983 entries in 204 pages
[ 0.188376] ftrace: allocated 204 pages with 4 groups
[ 0.189674] Dynamic Preempt: voluntary
[ 0.189747] rcu: Preemptible hierarchical RCU implementation.
[ 0.189749] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.189751] Trampoline variant of Tasks RCU enabled.
[ 0.189752] Rude variant of Tasks RCU enabled.
[ 0.189753] Tracing variant of Tasks RCU enabled.
[ 0.189754] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.189756] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.198828] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.199043] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.202127] Console: colour VGA+ 80x25
[ 0.207424] printk: console [tty0] enabled
[ 0.207509] ACPI: Core revision 20220331
[ 0.207713] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.207782] APIC: Switch to symmetric I/O mode setup
[ 0.208203] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.227779] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27d2ea9daed, max_idle_ns: 440795319689 ns
[ 0.227843] Calibrating delay loop (skipped), value calculated using timer frequency.. 5525.56 BogoMIPS (lpj=11051128)
[ 0.227901] pid_max: default: 32768 minimum: 301
[ 0.228052] LSM: Security Framework initializing
[ 0.228118] landlock: Up and running.
[ 0.228160] Yama: becoming mindful.
[ 0.228263] AppArmor: AppArmor initialized
[ 0.228435] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.228521] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.229075] CPU0: Thermal monitoring enabled (TM2)
[ 0.229133] process: using mwait in idle threads
[ 0.229178] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.229221] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.229268] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.229323] Spectre V2 : Mitigation: Retpolines
[ 0.229364] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.229416] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.229459] Speculative Store Bypass: Vulnerable
[ 0.229503] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.229546] MMIO Stale Data: Unknown: No mitigations
[ 0.260312] Freeing SMP alternatives memory: 44K
[ 0.369408] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.369779] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.369833] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.369925] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.370002] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.370077] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.370922] ... version: 2
[ 0.370963] ... bit width: 40
[ 0.371004] ... generic registers: 2
[ 0.371044] ... value mask: 000000ffffffffff
[ 0.371086] ... max period: 000000007fffffff
[ 0.371128] ... fixed-purpose events: 3
[ 0.371168] ... event mask: 0000000700000003
[ 0.371387] rcu: Hierarchical SRCU implementation.
[ 0.371429] rcu: Max phase no-delay instances is 1000.
[ 0.371838] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.371838] smp: Bringing up secondary CPUs ...
[ 0.371838] x86: Booting SMP configuration:
[ 0.371838] .... node #0, CPUs: #1 #2 #3
[ 0.379868] smp: Brought up 1 node, 4 CPUs
[ 0.379954] smpboot: Max logical packages: 1
[ 0.379995] smpboot: Total of 4 processors activated (22102.25 BogoMIPS)
[ 0.384633] devtmpfs: initialized
[ 0.384633] x86/mm: Memory block size: 128MB
[ 0.385908] ACPI: PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[ 0.386046] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.386114] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.386262] pinctrl core: initialized pinctrl subsystem
[ 0.388025] PM: RTC time: 12:31:13, date: 2023-01-04
[ 0.388907] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.389389] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.389696] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.390028] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.390113] audit: initializing netlink subsys (disabled)
[ 0.390198] audit: type=2000 audit(1672835473.180:1): state=initialized audit_enabled=0 res=1
[ 0.390198] thermal_sys: Registered thermal governor 'fair_share'
[ 0.390198] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.390198] thermal_sys: Registered thermal governor 'step_wise'
[ 0.390198] thermal_sys: Registered thermal governor 'user_space'
[ 0.390198] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.390198] EISA bus registered
[ 0.390198] cpuidle: using governor ladder
[ 0.390198] cpuidle: using governor menu
[ 0.390198] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.390198] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.390198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.390198] PCI: Using configuration type 1 for base access
[ 0.395015] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.395077] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.395077] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.396037] ACPI: Added _OSI(Module Device)
[ 0.396080] ACPI: Added _OSI(Processor Device)
[ 0.396122] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.396164] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.396207] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.396249] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.396291] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.397570] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.429188] ACPI: Dynamic OEM Table Load:
[ 0.429188] ACPI: SSDT 0xFFFF8BB080B11800 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.429188] ACPI: Dynamic OEM Table Load:
[ 0.429188] ACPI: SSDT 0xFFFF8BB080A91A00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.429521] ACPI: Dynamic OEM Table Load:
[ 0.429570] ACPI: SSDT 0xFFFF8BB080A90A00 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.430189] ACPI: Dynamic OEM Table Load:
[ 0.430237] ACPI: SSDT 0xFFFF8BB080A91600 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.431841] ACPI: Interpreter enabled
[ 0.431841] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.431841] ACPI: Using IOAPIC for interrupt routing
[ 0.431841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.431841] PCI: Using E820 reservations for host bridge windows
[ 0.431841] ACPI: Enabled 9 GPEs in block 00 to 1F
[ 0.439840] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.439840] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.439840] PCI host bridge to bus 0000:00
[ 0.439840] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.439840] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.439840] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.439840] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[ 0.439840] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.439840] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[ 0.439840] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.439840] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[ 0.439840] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[ 0.439840] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.439840] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.439856] pci 0000:00:1b.0: reg 0x10: [mem 0xdfff8000-0xdfffbfff 64bit]
[ 0.443912] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.444160] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.444282] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.444477] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.444601] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.444785] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.444871] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.445053] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.445135] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.445314] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.445396] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.445576] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.445658] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.445850] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.445909] pci 0000:00:1d.7: reg 0x10: [mem 0xdffff000-0xdffff3ff]
[ 0.446143] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.446374] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.446495] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.446552] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
[ 0.446598] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.446652] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.446857] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.446915] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.446965] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.447015] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.447065] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.447114] pci 0000:00:1f.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.447173] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.447218] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.447262] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.447306] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.447466] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.447522] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.447571] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.447620] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.447669] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.447717] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
[ 0.447852] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.448022] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.448116] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.448337] pci 0000:01:00.0: [10de:104a] type 00 class 0x030000
[ 0.448393] pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
[ 0.448446] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.448506] pci 0000:01:00.0: reg 0x1c: [mem 0xda000000-0xdbffffff 64bit]
[ 0.448556] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
[ 0.448604] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.448654] pci 0000:01:00.0: enabling Extended Tags
[ 0.448708] pci 0000:01:00.0: Enabling HDA controller
[ 0.448756] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.448858] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5.0 GT/s PCIe x16 link)
[ 0.449000] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.449046] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.449090] pci 0000:00:01.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.449136] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.449235] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.449354] pci 0000:03:00.0: [1969:1083] type 00 class 0x020000
[ 0.449423] pci 0000:03:00.0: reg 0x10: [mem 0xdfec0000-0xdfefffff 64bit]
[ 0.449478] pci 0000:03:00.0: reg 0x18: [io 0xdf00-0xdf7f]
[ 0.449579] pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.449692] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449838] pci 0000:00:1c.1: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 0.459863] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.459909] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.459954] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.460018] pci_bus 0000:04: extended config space not accessible
[ 0.460119] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.460172] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.460225] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.460279] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[ 0.461102] pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[ 0.462496] ACPI: PCI: Interrupt link LNKA configured for IRQ 5
[ 0.462674] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.462852] ACPI: PCI: Interrupt link LNKC configured for IRQ 9
[ 0.463028] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.463205] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.463249] ACPI: PCI: Interrupt link LNKE disabled
[ 0.463423] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.463467] ACPI: PCI: Interrupt link LNKF disabled
[ 0.463640] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0
[ 0.463684] ACPI: PCI: Interrupt link LNK0 disabled
[ 0.463866] ACPI: PCI: Interrupt link LNK1 configured for IRQ 3
[ 0.464240] iommu: Default domain type: Translated
[ 0.464240] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.464297] SCSI subsystem initialized
[ 0.464352] libata version 3.00 loaded.
[ 0.464352] ACPI: bus type USB registered
[ 0.464352] usbcore: registered new interface driver usbfs
[ 0.464352] usbcore: registered new interface driver hub
[ 0.464352] usbcore: registered new device driver usb
[ 0.464352] pps_core: LinuxPPS API ver. 1 registered
[ 0.464352] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.464352] PTP clock support registered
[ 0.464352] EDAC MC: Ver: 3.0.0
[ 0.464352] NetLabel: Initializing
[ 0.464352] NetLabel: domain hash size = 128
[ 0.464352] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.464352] NetLabel: unlabeled traffic allowed by default
[ 0.464409] mctp: management component transport protocol core
[ 0.464409] NET: Registered PF_MCTP protocol family
[ 0.464409] PCI: Using ACPI for IRQ routing
[ 0.471982] PCI: pci_cache_line_size set to 64 bytes
[ 0.472027] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.472030] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
[ 0.472052] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.472052] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.472052] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.472052] vgaarb: loaded
[ 0.473583] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.473635] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.473683] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.475923] clocksource: Switched to clocksource tsc-early
[ 0.476233] VFS: Disk quotas dquot_6.6.0
[ 0.476305] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.476602] AppArmor: AppArmor Filesystem Enabled
[ 0.476684] pnp: PnP ACPI init
[ 0.477031] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.477079] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.477123] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.477167] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.477212] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.478877] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.479363] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.479769] pnp 00:08: disabling [mem 0x000ce200-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.479870] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.479917] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.479963] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.480008] system 00:08: [mem 0xbfee0000-0xbfeeffff] could not be reserved
[ 0.480054] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.480099] system 00:08: [mem 0x00100000-0xbfedffff] could not be reserved
[ 0.480145] system 00:08: [mem 0xbfef0000-0xbfefffff] has been reserved
[ 0.480191] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.480236] system 00:08: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.480281] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.480326] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.480371] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.480416] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.480461] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
[ 0.480523] pnp: PnP ACPI: found 9 devices
[ 0.488525] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.488766] NET: Registered PF_INET protocol family
[ 0.489170] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.492524] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.492641] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.492801] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.493147] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.493378] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.493647] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.493812] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.493913] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.494082] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.494136] NET: Registered PF_XDP protocol family
[ 0.494194] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.494252] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.494311] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.494369] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.494439] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.494490] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.494546] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.494603] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.494650] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.494695] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.494742] pci 0000:00:01.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.494788] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.494844] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.494888] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.494935] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.494981] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.495038] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.495082] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.495129] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.495176] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.495234] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.495286] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.495331] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.495376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.495423] pci_bus 0000:00: resource 7 [mem 0xbff00000-0xfebfffff window]
[ 0.495470] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.495513] pci_bus 0000:01: resource 1 [mem 0xda000000-0xddffffff]
[ 0.495558] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.495611] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.495655] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.495700] pci_bus 0000:02: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.495753] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.495798] pci_bus 0000:03: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.495842] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.495894] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.495939] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.495983] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.496028] pci_bus 0000:04: resource 7 [mem 0xbff00000-0xfebfffff window]
[ 0.516573] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x170 took 18931 usecs
[ 0.516665] PCI: CLS 4 bytes, default 64
[ 0.516715] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.516762] software IO TLB: mapped [mem 0x00000000bbee0000-0x00000000bfee0000] (64MB)
[ 0.516814] Trying to unpack rootfs image as initramfs...
[ 0.517756] Initialise system trusted keyrings
[ 0.517832] Key type blacklist registered
[ 0.517939] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.520985] zbud: loaded
[ 0.521722] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.522081] fuse: init (API version 7.36)
[ 0.522422] integrity: Platform Keyring initialized
[ 0.522470] integrity: Machine keyring initialized
[ 0.536150] Key type asymmetric registered
[ 0.536193] Asymmetric key parser 'x509' registered
[ 1.424948] Freeing initrd memory: 67172K
[ 1.431496] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 1.431589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 1.431702] io scheduler mq-deadline registered
[ 1.432485] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 1.432898] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.433179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.433273] ACPI: button: Power Button [PWRB]
[ 1.433383] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.433502] ACPI: button: Power Button [PWRF]
[ 1.434352] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.454821] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.458495] Linux agpgart interface v0.103
[ 1.461637] loop: module loaded
[ 1.461950] ata_piix 0000:00:1f.1: version 2.13
[ 1.463454] scsi host0: ata_piix
[ 1.463714] scsi host1: ata_piix
[ 1.463814] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.463872] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.464061] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.466200] scsi host2: ata_piix
[ 1.466487] scsi host3: ata_piix
[ 1.466589] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 1.466634] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 1.466951] tun: Universal TUN/TAP device driver, 1.6
[ 1.467052] PPP generic driver version 2.4.2
[ 1.467214] VFIO - User Level meta-driver version: 0.3
[ 1.467373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.467420] ehci-pci: EHCI PCI platform driver
[ 1.467639] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.467689] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.471662] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdffff000
[ 1.483853] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.483965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 1.484021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.484073] usb usb1: Product: EHCI Host Controller
[ 1.484115] usb usb1: Manufacturer: Linux 5.19.0-26-generic ehci_hcd
[ 1.484158] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.484356] hub 1-0:1.0: USB hub found
[ 1.484408] hub 1-0:1.0: 8 ports detected
[ 1.484762] ehci-platform: EHCI generic platform driver
[ 1.484817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.484863] ohci-pci: OHCI PCI platform driver
[ 1.484917] ohci-platform: OHCI generic platform driver
[ 1.484968] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.485155] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.485209] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.485267] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.485325] uhci_hcd 0000:00:1d.0: irq 23, io port 0x0000ff00
[ 1.485439] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 1.485494] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.485546] usb usb2: Product: UHCI Host Controller
[ 1.485588] usb usb2: Manufacturer: Linux 5.19.0-26-generic uhci_hcd
[ 1.485631] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.485811] hub 2-0:1.0: USB hub found
[ 1.485870] hub 2-0:1.0: 2 ports detected
[ 1.486197] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.486246] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.486303] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.486361] uhci_hcd 0000:00:1d.1: irq 19, io port 0x0000fe00
[ 1.486479] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 1.486534] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.486586] usb usb3: Product: UHCI Host Controller
[ 1.486628] usb usb3: Manufacturer: Linux 5.19.0-26-generic uhci_hcd
[ 1.486672] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.486856] hub 3-0:1.0: USB hub found
[ 1.486907] hub 3-0:1.0: 2 ports detected
[ 1.487232] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.487280] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.487337] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.487403] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000fd00
[ 1.487512] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 1.487567] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.487619] usb usb4: Product: UHCI Host Controller
[ 1.487661] usb usb4: Manufacturer: Linux 5.19.0-26-generic uhci_hcd
[ 1.487704] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.487896] hub 4-0:1.0: USB hub found
[ 1.487954] hub 4-0:1.0: 2 ports detected
[ 1.488276] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.488324] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.488381] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.488452] uhci_hcd 0000:00:1d.3: irq 16, io port 0x0000fc00
[ 1.488571] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 1.488626] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.488678] usb usb5: Product: UHCI Host Controller
[ 1.488720] usb usb5: Manufacturer: Linux 5.19.0-26-generic uhci_hcd
[ 1.488764] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.488952] hub 5-0:1.0: USB hub found
[ 1.489003] hub 5-0:1.0: 2 ports detected
[ 1.489273] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.489729] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.489778] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.490012] mousedev: PS/2 mouse device common for all mice
[ 1.490247] rtc_cmos 00:01: RTC can wake from S4
[ 1.490567] rtc_cmos 00:01: registered as rtc0
[ 1.490637] rtc_cmos 00:01: setting system clock to 2023-01-04T12:31:14 UTC (1672835474)
[ 1.490717] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.490782] i2c_dev: i2c /dev entries driver
[ 1.490933] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.491039] device-mapper: uevent: version 1.0.3
[ 1.491171] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 1.491260] platform eisa.0: Probing EISA bus 0
[ 1.491304] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.491348] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.491392] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.491436] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.491482] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.491525] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.491569] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.491612] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.491655] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.491699] platform eisa.0: EISA: Detected 0 cards
[ 1.491742] intel_pstate: CPU model not supported
[ 1.491830] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.492025] drop_monitor: Initializing network drop monitor service
[ 1.515770] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.515873] tsc: Refined TSC clocksource calibration: 2762.509 MHz
[ 1.515929] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27d1e862400, max_idle_ns: 440795335840 ns
[ 1.516014] clocksource: Switched to clocksource tsc
[ 1.516138] NET: Registered PF_INET6 protocol family
[ 1.522384] Segment Routing with IPv6
[ 1.522443] In-situ OAM (IOAM) with IPv6
[ 1.522513] NET: Registered PF_PACKET protocol family
[ 1.522614] Key type dns_resolver registered
[ 1.523057] IPI shorthand broadcast: enabled
[ 1.523134] sched_clock: Marking stable (1514190936, 8775619)->(1524891947, -1925392)
[ 1.523523] registered taskstats version 1
[ 1.523640] Loading compiled-in X.509 certificates
[ 1.525309] Loaded X.509 cert 'Build time autogenerated kernel key: f9e2a7b4bb7c8535a4f1629cbe7dbe9ae9388590'
[ 1.526696] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.528069] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.528124] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.528202] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.528577] zswap: loaded using pool lzo/zbud
[ 1.528835] Key type ._fscrypt registered
[ 1.528878] Key type .fscrypt registered
[ 1.528918] Key type fscrypt-provisioning registered
[ 1.534671] Key type encrypted registered
[ 1.534716] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.534770] ima: No TPM chip found, activating TPM-bypass!
[ 1.534822] Loading compiled-in module X.509 certificates
[ 1.536203] Loaded X.509 cert 'Build time autogenerated kernel key: f9e2a7b4bb7c8535a4f1629cbe7dbe9ae9388590'
[ 1.536259] ima: Allocated hash algorithm: sha1
[ 1.536309] ima: No architecture policies found
[ 1.536364] evm: Initialising EVM extended attributes:
[ 1.536406] evm: security.selinux
[ 1.536446] evm: security.SMACK64
[ 1.536486] evm: security.SMACK64EXEC
[ 1.536525] evm: security.SMACK64TRANSMUTE
[ 1.536566] evm: security.SMACK64MMAP
[ 1.536605] evm: security.apparmor
[ 1.536645] evm: security.ima
[ 1.536684] evm: security.capability
[ 1.536724] evm: HMAC attrs: 0x1
[ 1.539006] PM: Magic number: 7:19:531
[ 1.539086] tty ttyS11: hash matches
[ 1.540507] RAS: Correctable Errors collector initialized.
[ 1.626391] ata4.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
[ 1.636457] ata3.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[ 1.636504] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.776321] ata1.00: HPA detected: current 234439535, native 234441648
[ 1.776375] ata1.00: ATA-6: ST3120026A, 3.06, max UDMA/100
[ 1.776419] ata1.00: 234439535 sectors, multi 16: LBA48
[ 1.819379] ata1.01: HPA detected: current 625140335, native 625142448
[ 1.819424] ata1.01: ATA-7: MAXTOR STM3320820A, 3.AAE, max UDMA/100
[ 1.819468] ata1.01: 625140335 sectors, multi 16: LBA48
[ 1.877866] scsi 0:0:0:0: Direct-Access ATA ST3120026A 3.06 PQ: 0 ANSI: 5
[ 1.878390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.878431] sd 0:0:0:0: [sda] 234439535 512-byte logical blocks: (120 GB/112 GiB)
[ 1.878506] sd 0:0:0:0: [sda] Write Protect is off
[ 1.878574] scsi 0:0:1:0: Direct-Access ATA MAXTOR STM332082 E PQ: 0 ANSI: 5
[ 1.879316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.879410] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.881223] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.881329] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.881469] sd 0:0:1:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.881548] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.881569] scsi 2:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[ 1.881594] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.883651] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.883751] sd 0:0:1:0: [sdb] Preferred minimum I/O size 512 bytes
[ 1.884034] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.884109] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.884171] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.884249] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.884293] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.884333] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.884437] sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
[ 1.886441] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5
[ 1.955590] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.955645] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.955853] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 1.986095] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.986177] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 2.065454] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sda3
[ 2.066049] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.087704] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 >
[ 2.088426] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.145872] usb 2-1: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
[ 2.145929] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.145974] usb 2-1: Product: 2.4G Mouse
[ 2.508851] sdc: sdc1 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 sdc16 sdc17 sdc18 sdc19 sdc20 sdc21 sdc22 sdc23 > sdc2 sdc3 sdc4
sdc2: <bsd: sdc24 sdc25 >
[ 2.510427] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.513353] Freeing unused decrypted memory: 2036K
[ 2.514522] Freeing unused kernel image (initmem) memory: 3148K
[ 2.523884] Write protecting the kernel read-only data: 32768k
[ 2.524946] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 2.525446] Freeing unused kernel image (rodata/data gap) memory: 1044K
[ 2.596195] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.596252] x86/mm: Checking user space page tables
[ 2.651855] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 2.665556] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.665611] Run /init as init process
[ 2.665652] with arguments:
[ 2.665654] /init
[ 2.665657] recovery
[ 2.665659] dis_ucode_ldr
[ 2.665660] with environment:
[ 2.665662] HOME=/
[ 2.665664] TERM=linux
[ 2.665666] BOOT_IMAGE=/boot/vmlinuz-5.19.0-26-generic
[ 2.819743] usb 1-6: New USB device found, idVendor=0bda, idProduct=8178, bcdDevice= 2.00
[ 2.819808] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.819862] usb 1-6: Product: USB WLAN
[ 2.819905] usb 1-6: Manufacturer: 802.11n
[ 2.819946] usb 1-6: SerialNumber: 00e04c000001
[ 2.929553] intel_rng: FWH not detected
[ 2.933919] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.936636] hid: raw HID events driver (C) Jiri Kosina
[ 2.945837] usbcore: registered new interface driver usbhid
[ 2.945890] usbhid: USB HID core driver
[ 2.947875] usb 1-8: new high-speed USB device number 4 using ehci-pci
[ 3.002270] atl1c 0000:03:00.0 enp3s0: renamed from eth0
[ 3.002645] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20220331/utaddress-204)
[ 3.002732] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 3.002829] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.003826] input: 2.4G Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:1EA7:0064.0001/input/input5
[ 3.004026] input: 2.4G Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:1EA7:0064.0001/input/input6
[ 3.004290] hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:1d.0-1/input0
[ 3.005959] gpio_ich gpio_ich.2.auto: GPIO from 974 to 1023
[ 3.120246] usb 1-8: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01
[ 3.120309] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.120678] hub 1-8:1.0: USB hub found
[ 3.120868] hub 1-8:1.0: 2 ports detected
[ 3.358253] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 74
[ 3.407855] usb 1-8.1: new high-speed USB device number 5 using ehci-pci
[ 3.517993] usb 1-8.1: New USB device found, idVendor=05dc, idProduct=a81d, bcdDevice=11.00
[ 3.518051] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.518104] usb 1-8.1: Product: USB Flash Drive
[ 3.518146] usb 1-8.1: Manufacturer: Lexar
[ 3.518188] usb 1-8.1: SerialNumber: AA7F2S3C0FGCM2QH
[ 3.884194] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.222026] random: crng init done
[ 8.140545] usb-storage 1-8.1:1.0: USB Mass Storage device detected
[ 8.142315] scsi host4: usb-storage 1-8.1:1.0
[ 8.142472] usbcore: registered new interface driver usb-storage
[ 8.144992] usbcore: registered new interface driver uas
[ 9.713780] scsi 4:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 4
[ 9.714160] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 9.714760] sd 4:0:0:0: [sdd] 31258624 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 9.715508] sd 4:0:0:0: [sdd] Write Protect is off
[ 9.715554] sd 4:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 9.716260] sd 4:0:0:0: [sdd] No Caching mode page found
[ 9.716306] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 9.722139] sdd: sdd1 sdd2
[ 9.722343] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 12.032971] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Quota mode: none.
[ 14.052802] systemd[1]: Inserted module 'autofs4'
[ 14.230756] systemd[1]: systemd 251.4-1ubuntu7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 14.230868] systemd[1]: Detected architecture x86-64.
[ 14.281293] systemd[1]: Hostname set to <francis-G41M-Combo>.
[ 14.811604] systemd-rc-local-generator[256]: /etc/rc.local is not marked executable, skipping.
[ 18.549041] systemd[1]: Queued start job for default target Friendly Recovery Mode.
[ 18.551092] systemd[1]: Created slice Slice /system/modprobe.
[ 18.552013] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 18.552508] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.552771] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 18.552972] systemd[1]: Reached target Slice Units.
[ 18.553187] systemd[1]: Reached target Local Verity Protected Volumes.
[ 18.568830] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 18.569126] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 18.569671] systemd[1]: Listening on Journal Audit Socket.
[ 18.570046] systemd[1]: Listening on Journal Socket (/dev/log).
[ 18.570443] systemd[1]: Listening on Journal Socket.
[ 18.570819] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
[ 18.573041] systemd[1]: Listening on udev Control Socket.
[ 18.573391] systemd[1]: Listening on udev Kernel Socket.
[ 18.575014] systemd[1]: Mounting Huge Pages File System...
[ 18.576671] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.578343] systemd[1]: Mounting Kernel Debug File System...
[ 18.581502] systemd[1]: Mounting Kernel Trace File System...
[ 18.584396] systemd[1]: Starting Journal Service...
[ 18.586248] systemd[1]: Starting Set the console keyboard layout...
[ 18.590595] systemd[1]: Starting Create List of Static Device Nodes...
[ 18.592705] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 18.594934] systemd[1]: Starting Load Kernel Module configfs...
[ 18.597622] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 18.600134] systemd[1]: Starting Load Kernel Module fuse...
[ 18.602312] systemd[1]: Starting Load Kernel Module pstore_blk...
[ 18.606260] systemd[1]: Starting Load Kernel Module pstore_zone...
[ 18.608446] systemd[1]: Starting Load Kernel Module ramoops...
[ 18.610506] systemd[1]: Starting Set console scheme...
[ 18.610855] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 18.693882] systemd[1]: Starting Load Kernel Modules...
[ 18.695677] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 18.696048] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 18.699288] systemd[1]: Starting Coldplug All udev Devices...
[ 18.702525] systemd[1]: Mounted Huge Pages File System.
[ 18.702912] systemd[1]: Mounted POSIX Message Queue File System.
[ 18.703250] systemd[1]: Mounted Kernel Debug File System.
[ 18.703578] systemd[1]: Mounted Kernel Trace File System.
[ 18.704133] systemd[1]: Finished Create List of Static Device Nodes.
[ 18.764173] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 18.764501] systemd[1]: Finished Load Kernel Module configfs.
[ 18.765235] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 18.765535] systemd[1]: Finished Load Kernel Module fuse.
[ 18.767630] systemd[1]: Mounting FUSE Control File System...
[ 18.769667] systemd[1]: Mounting Kernel Configuration File System...
[ 18.772382] systemd[1]: Mounted FUSE Control File System.
[ 18.773605] systemd[1]: Mounted Kernel Configuration File System.
[ 18.878164] EXT4-fs (sdb7): re-mounted. Quota mode: none.
[ 18.879981] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 18.881777] systemd[1]: Activating swap /swapfile...
[ 18.884087] systemd[1]: Starting Load/Save Random Seed...
[ 18.885882] systemd[1]: Starting Create System Users...
[ 18.896112] systemd[1]: Finished Set console scheme.
[ 18.978071] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 18.978420] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 19.186610] systemd[1]: Started Journal Service.
[ 19.395872] lp: driver loaded but no devices found
[ 19.448579] systemd-journald[273]: Received client request to flush runtime journal.
[ 19.453478] ppdev: user-space parallel port driver
[ 19.465737] Adding 2097148k swap on /swapfile. Priority:-2 extents:61 across:9125884k FS
[ 19.592855] parport_pc 00:03: reported by Plug and Play ACPI
[ 19.592988] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.684051] lp0: using parport0 (interrupt-driven).
[ 20.233114] it87: Found IT8720F chip at 0x290, revision 8
[ 20.233183] it87: Routing internal VCCH5V to in7
[ 20.233226] it87: Beeping is supported
[ 27.366155] intel_rng: FWH not detected
[ 27.604022] leds_ss4200: no LED devices found
[ 28.206992] intel_powerclamp: No package C-state available
[ 28.248322] intel_powerclamp: No package C-state available
[ 28.292323] intel_powerclamp: No package C-state available
[ 28.352333] intel_powerclamp: No package C-state available
[ 30.166436] IPMI message handler: version 39.2
[ 32.265508] ipmi device interface
[ 32.903031] ACPI: bus type drm_connector registered
[ 33.706392] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 33.711222] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 35.806008] rtl8192cu: Chip version 0x11
[ 35.884640] rtl8192cu: Board Type 0
[ 35.884881] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 35.884911] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 35.884997] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 35.887154] usbcore: registered new interface driver rtl8192cu
[ 36.043653] usbcore: registered new interface driver rtl8xxxu
[ 36.142962] rtl8192cu 1-6:1.0 wlxc04a001c3f2f: renamed from wlan0
[ 36.345286] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 36.345297] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 36.345301] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 36.345305] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 36.345307] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 36.345310] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 36.345313] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 36.345316] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 36.345319] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 36.357731] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 36.357834] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 36.357928] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 36.358024] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 36.358413] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0
[ 36.881372] nvidia: loading out-of-tree module taints kernel.
[ 36.881389] nvidia: module license 'NVIDIA' taints kernel.
[ 36.881391] Disabling lock debugging due to kernel taint
[ 37.022668] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[ 37.023308] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 37.023335] NVRM: The Unknown NVIDIA G9x Series GPU installed in this
NVRM: system is not supported through the 390.157 NVIDIA
NVRM: driver. You can try the NVIDIA 340.xx Legacy drivers.
NVRM: Please visit http://www.nvidia.com/object/unix.html
NVRM: for download information. The 390.157 NVIDIA driver
NVRM: will ignore this GPU. Continuing probe...
[ 37.023437] nvidia: probe of 0000:01:00.0 failed with error -1
[ 37.023477] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 37.023480] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 37.023667] nvidia-nvlink: Unregistered the Nvlink Core, major device number 237
[ 37.482942] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[ 37.483587] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
[ 37.483619] NVRM: The Unknown NVIDIA G9x Series GPU installed in this
NVRM: system is not supported through the 390.157 NVIDIA
NVRM: driver. You can try the NVIDIA 340.xx Legacy drivers.
NVRM: Please visit http://www.nvidia.com/object/unix.html
NVRM: for download information. The 390.157 NVIDIA driver
NVRM: will ignore this GPU. Continuing probe...
[ 37.483723] nvidia: probe of 0000:01:00.0 failed with error -1
[ 37.483768] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 37.483771] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 37.483985] nvidia-nvlink: Unregistered the Nvlink Core, major device number 237
[ 37.692514] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Quota mode: none.
[ 44.942660] EXT4-fs (sdc9): mounted filesystem with ordered data mode. Quota mode: none.
[ 46.270337] process '/usr/sbin/zfs-fuse' started with executable stack
[ 46.412952] audit: type=1400 audit(1672835519.417:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=598 comm="apparmor_parser"
[ 46.413394] audit: type=1400 audit(1672835519.417:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=599 comm="apparmor_parser"
[ 46.413402] audit: type=1400 audit(1672835519.417:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=599 comm="apparmor_parser"
[ 46.534719] audit: type=1400 audit(1672835519.537:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="torbrowser_tor" pid=607 comm="apparmor_parser"
[ 46.733010] audit: type=1400 audit(1672835519.737:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=601 comm="apparmor_parser"
[ 46.754238] audit: type=1400 audit(1672835519.757:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=600 comm="apparmor_parser"
[ 46.754254] audit: type=1400 audit(1672835519.757:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=600 comm="apparmor_parser"
[ 46.754260] audit: type=1400 audit(1672835519.757:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=600 comm="apparmor_parser"
[ 46.754266] audit: type=1400 audit(1672835519.757:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=600 comm="apparmor_parser"
[ 46.855003] audit: type=1400 audit(1672835519.857:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="torbrowser_firefox" pid=606 comm="apparmor_parser"
[ 50.025326] systemd-rc-local-generator[874]: /etc/rc.local is not marked executable, skipping.
[ 53.136048] zram: Added device: zram0
[ 54.027202] zram0: detected capacity change from 0 to 8138736
[ 55.198593] Adding 4069364k swap on /dev/zram0. Priority:5 extents:1 across:4069364k SSFS
[ 58.616039] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[ 58.616686] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
[ 58.616713] NVRM: The Unknown NVIDIA G9x Series GPU installed in this
NVRM: system is not supported through the 390.157 NVIDIA
NVRM: driver. You can try the NVIDIA 340.xx Legacy drivers.
NVRM: Please visit http://www.nvidia.com/object/unix.html
NVRM: for download information. The 390.157 NVIDIA driver
NVRM: will ignore this GPU. Continuing probe...
[ 58.616816] nvidia: probe of 0000:01:00.0 failed with error -1
[ 58.616858] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 58.616861] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 58.617059] nvidia-nvlink: Unregistered the Nvlink Core, major device number 237
[ 62.824963] kauditd_printk_skb: 18 callbacks suppressed
[ 62.824969] audit: type=1400 audit(1672835535.829:30): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=858 comm="cupsd" capability=12 capname="net_admin"
[ 65.955877] atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up<100 Mbps Full Duplex>
[ 65.961894] rtl8192cu: MAC auto ON okay!
[ 65.994660] rtl8192cu: Tx queue select: 0x05
[ 71.227400] wlxc04a001c3f2f: authenticate with 28:9e:fc:e7:d6:b0
[ 71.227423] wlxc04a001c3f2f: bad VHT capabilities, disabling VHT
[ 71.227426] wlxc04a001c3f2f: 80 MHz not supported, disabling VHT
[ 71.238741] wlxc04a001c3f2f: send auth to 28:9e:fc:e7:d6:b0 (try 1/3)
[ 71.242705] wlxc04a001c3f2f: authenticated
[ 71.247856] wlxc04a001c3f2f: associate with 28:9e:fc:e7:d6:b0 (try 1/3)
[ 71.284543] wlxc04a001c3f2f: RX AssocResp from 28:9e:fc:e7:d6:b0 (capab=0x411 status=0 aid=2)
[ 71.390932] wlxc04a001c3f2f: associated
[ 71.780092] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc04a001c3f2f: link becomes ready
[ 73.937031] FS-Cache: Loaded
[ 74.652649] Key type cifs.spnego registered
[ 74.652681] Key type cifs.idmap registered
[ 74.653346] Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers
[ 74.653351] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers
[ 74.653362] CIFS: Attempting to mount \\192.168.1.254\DisqueUSB0_0
[ 74.721550] CIFS: VFS: \\192.168.1.254 failed to connect to IPC (rc=-6)
[ 74.741713] CIFS: VFS: cifs_mount failed w/return code = -6
[ 74.741807] Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers
[ 74.741812] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers
[ 74.741821] CIFS: Attempting to mount \\192.168.1.254\DISQUEUSB0_0
[ 74.807869] CIFS: VFS: \\192.168.1.254 failed to connect to IPC (rc=-6)
[ 74.828391] CIFS: VFS: cifs_mount failed w/return code = -6
[ 75.775642] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 75.797210] vboxdrv: Found 4 processor cores
[ 75.798807] vboxdrv: fAsync=0 offMin=0x239 offMax=0x1aaa
[ 75.898990] vboxdrv: TSC mode is Synchronous, tentative frequency 2762508912 Hz
[ 75.898998] vboxdrv: Successfully loaded version 6.1.38_Ubuntu r153438 (interface 0x00320000)
[ 76.394242] VBoxNetFlt: Successfully started.
[ 76.475401] VBoxNetAdp: Successfully started.
[ 91.968034] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[ 91.969353] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
[ 91.969386] NVRM: The Unknown NVIDIA G9x Series GPU installed in this
NVRM: system is not supported through the 390.157 NVIDIA
NVRM: driver. You can try the NVIDIA 340.xx Legacy drivers.
NVRM: Please visit http://www.nvidia.com/object/unix.html
NVRM: for download information. The 390.157 NVIDIA driver
NVRM: will ignore this GPU. Continuing probe...
[ 91.969489] nvidia: probe of 0000:01:00.0 failed with error -1
[ 91.969536] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 91.969539] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 91.969753] nvidia-nvlink: Unregistered the Nvlink Core, major device number 237
[ 107.871520] mtrr: base(0xdb000000) is not aligned on a size(0xe00000) boundary
[ 136.511226] rfkill: input handler disabled
francis@francis-G41M-Combo:~$ -- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#10 Le 04/01/2023, à 13:43
- FrancisFDZ
Re : [Résolu] Message bizarre au login
/etc/gdm3/custom.conf : c'est moins long
# GDM configuration storage
#
# See /usr/share/gdm/gdm.schemas for a list of available options.
[daemon]
AutomaticLoginEnable=True
AutomaticLogin=francis
# Uncomment the line below to force the login screen to use Xorg
WaylandEnable=false
# Enabling automatic login
# Enabling timed login
# TimedLoginEnable = true
# TimedLogin = user1
# TimedLoginDelay = 10
[security]
[xdmcp]
[chooser]
[debug]
# Uncomment the line below to turn on debugging
# More verbose logs
# Additionally lets the X server dump core if it crashes
Enable=trueJe vais essayer d'invalider la dernière option et on verra (ou pas)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#11 Le 04/01/2023, à 13:53
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Après avoir invalidé l'option "debug"
[debug]
# Uncomment the line below to turn on debugging
# More verbose logs
# Additionally lets the X server dump core if it crashes
# Enable=truej'ai d'abord fermé puis rouvert la session ; puis redémarré : ça me rappelle les poppies
Non, non rien n'a changé
Tout tout a continué
Hey hey!
NB : j'ai du coup re-validé le debug
Dernière modification par FrancisFDZ (Le 04/01/2023, à 14:51)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#12 Le 04/01/2023, à 15:07
- Coeur Noir
Re : [Résolu] Message bizarre au login
Pour faire un peu de tri dans dmesg :
sudo dmesg | grep -Ei "erro|warn|fail"ça n'affichera plus que les lignes contenant les expressions erro, warn ou fail donc une façon de repérer des Error ou errors des Warning ou des failed ou Failure.
Ça laissera quelques lignes peu significatives mais ça sera quand même plus simple à lire ;-)
Les commandes
systemd-analyze blameou
systemd-analyze critical-chaindonneraient peut-être d'autres pistes là où dmesg donnera surtout des infos relatives au matériel ?
Dernière modification par Coeur Noir (Le 04/01/2023, à 15:16)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#13 Le 04/01/2023, à 15:35
- geole
Re : [Résolu] Message bizarre au login
Bonjour
Peux-tu essayer cette proposition https://bbs.archlinux.org/viewtopic.php … 0#p2041000
systemctl --global disable gnome-keyring-daemon.socket
systemctl --user enable gnome-keyring-daemon.serviceMais je n'ai pas tout compris
Peut-être serait-il plus simple de se connecter en Weyland au lieu de x11???
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#14 Le 04/01/2023, à 15:53
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Sans trop y croire j'ai cherché si un fichier quelque part pouvait afficher le message inopportun :
francis@francis-G41M-Combo:~$ sudo find / -type f -exec grep -l "discover_other_daemon" {} \;Ça tourne, mais pas de résultat. Erreur dans la commande ?
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#15 Le 04/01/2023, à 16:59
- geole
Re : [Résolu] Message bizarre au login
Je doute que ce truc ( discover_other_daemon) soit un fichier
Regarde plutôt
systemctl list-units | grep discoverDernière modification par geole (Le 04/01/2023, à 17:01)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#16 Le 05/01/2023, à 08:49
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Je suis actuellement sous X11 sur ma session Ubuntu, depuis l'installation de ma carte NVidia. Pour me autres sessions, je n'ai pas eu à forcer le passage de Wayland à X11, les différents systéme ont réglé ça automatiquement. Du coup et vu que e seul systéme sur lquel j'ai ces ennui est justement celui où j'ai forcé le passage de Wayland à X11, je pense avoir fait une erreur de manip mais je n'ai pas noté quelles modifs j'ai du faire. Je vais donc tenter un retour à Wayland (j'espère bien retrouver la fameuse roue dentée) en espérant que ma CG soit maintenant compatible.
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#17 Le 05/01/2023, à 11:22
- FrancisFDZ
Re : [Résolu] Message bizarre au login
discover_other_daemon: 1francis@francis-G41M-Combo:~$ systemctl list-units | grep discover
francis@francis-G41M-Combo:~$Pas de réponse
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#18 Le 05/01/2023, à 15:09
- inbox
Re : [Résolu] Message bizarre au login
On va tenter de trouver une info intéressante dans les logs.
Donne le contenu de :
/var/log/syslogAinsi que celui ci, s'il existe chez toi :
/var/log/daemon.logUn problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#19 Le 06/01/2023, à 10:42
- FrancisFDZ
Re : [Résolu] Message bizarre au login
NB : je ne poste pas de mon fixe, victime de ce dysfonctionnement
Récapitulation :
- Un message s'affiche devant le prompt dans "terminal" ;
discover_other_daemon: 1- ce message ne s'affiche que pour la première commande mais réapparait à chaque lancement de "terminal". D'autre part, il ne gène pas l'utilisation courante de 'terminal"
- Ce message ressemble plus à un "warning" qu'à un message d'erreur, et semble plutôt lié à l'application "terminal"
Pour confirmer, je vais d'abord vérifier que ce message n'apparait pas en console (Ctrl+Alt+F2) puis chercher les fichiers de config de "terminal", en particulier /etc/bash/.bashrc (et autres fichiers /etc/bash/*) et ~/.*shrc
@inbox : je répondrais à tes demandes dès que je serais devant mon fixe.
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#20 Le 06/01/2023, à 14:22
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Réponses :
@Coeur noir (#12)
francis@francis-G41M-Combo:/etc$ sudo dmesg | grep -Ei "erro|warn|fail"
[sudo] Mot de passe de francis :
[ 1.543001] RAS: Correctable Errors collector initialized.
[ 3.021519] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20220331/utaddress-204)
[ 19.381080] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 19.551197] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 35.903724] nvidia: probe of 0000:01:00.0 failed with error -1
[ 35.903766] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 36.380575] nvidia: probe of 0000:01:00.0 failed with error -1
[ 36.380620] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 59.221557] nvidia: probe of 0000:01:00.0 failed with error -1
[ 59.221602] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 75.106605] CIFS: VFS: \\192.168.1.254 failed to connect to IPC (rc=-6)
[ 75.116222] CIFS: VFS: cifs_mount failed w/return code = -6
[ 75.158400] CIFS: VFS: \\192.168.1.254 failed to connect to IPC (rc=-6)
[ 75.167228] CIFS: VFS: cifs_mount failed w/return code = -6
[ 76.412969] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 101.642957] nvidia: probe of 0000:01:00.0 failed with error -1
[ 101.643001] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 205.978712] nvidia: probe of 0000:01:00.0 failed with error -1
[ 205.978778] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 216.589978] nvidia: probe of 0000:01:00.0 failed with error -1
[ 216.590032] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 308.926620] nvidia: probe of 0000:01:00.0 failed with error -1
[ 308.926682] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 319.566481] nvidia: probe of 0000:01:00.0 failed with error -1
[ 319.566532] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 330.163152] nvidia: probe of 0000:01:00.0 failed with error -1
[ 330.163205] NVRM: The NVIDIA probe routine failed for 1 device(s).
francis@francis-G41M-Combo:/etc$ francis@francis-G41M-Combo:/etc$ systemd-analyze blame
54.220s udisks2.service
25.229s systemd-journal-flush.service
20.203s accounts-daemon.service
18.347s gpu-manager.service
15.446s tor@default.service
13.095s cups.service
12.051s NetworkManager-wait-online.service
11.214s ModemManager.service
9.607s smartmontools.service
7.947s dev-sdb7.device
7.812s NetworkManager.service
5.963s colord.service
5.291s thermald.service
5.230s grub-common.service
4.852s wpa_supplicant.service
4.848s logrotate.service
4.348s systemd-fsck@dev-disk-by\x2duuid-49cba26b\x2d3183\x2d42df\x2d82d1\x2d54>
3.446s power-profiles-daemon.service
3.322s dbus.service
3.290s polkit.service
2.757s grub-initrd-fallback.service
2.551s zfs-fuse.service
2.418s apparmor.service
2.396s media-francis-bbox_usb.mount
2.361s avahi-daemon.service
2.302s gdm.service
2.300s systemd-udevd.service
2.259s systemd-logind.service
1.970s rsyslog.service
1.745s zram-config.service
1.666s systemd-modules-load.service
1.544s virtualbox.service
1.370s console-setup.service
1.365s e2scrub_reap.service
1.319s packagekit.service
1.194s systemd-udev-trigger.service
1.129s keyboard-setup.service
1.093s lm-sensors.service
1.080s modprobe@chromeos_pstore.service
1.077s modprobe@configfs.service
1.074s modprobe@drm.service
1.071s modprobe@efi_pstore.service
1.069s modprobe@fuse.service
1.066s modprobe@pstore_blk.service
1.064s modprobe@pstore_zone.service
1.062s modprobe@ramoops.service
1.035s systemd-oomd.service
994ms systemd-random-seed.service
947ms systemd-tmpfiles-setup-dev.service
911ms systemd-sysusers.service
769ms ecbd.service
718ms home-francis-ryzom.mount
697ms user@1000.service
662ms systemd-journald.service
657ms systemd-tmpfiles-setup.service
632ms swapfile.swap
536ms systemd-sysctl.service
513ms systemd-rfkill.service
442ms switcheroo-control.service
419ms systemd-update-utmp-runlevel.service
411ms setvtrgb.service
366ms update-notifier-download.service
333ms systemd-remount-fs.service
297ms apport.service
285ms home.mount
270ms plymouth-read-write.service
252ms atd.service
242ms systemd-timesyncd.service
220ms kerneloops.service
217ms upower.service
209ms dev-hugepages.mount
208ms dev-mqueue.mount
207ms sys-kernel-debug.mount
205ms sys-kernel-tracing.mount
196ms kmod-static-nodes.service
193ms tor.service
163ms ufw.service
149ms systemd-fsck@dev-disk-by\x2duuid-0435639e\x2d05b1\x2d499a\x2d9ac4\x2d1b>
85ms systemd-update-utmp.service
76ms rtkit-daemon.service
55ms systemd-user-sessions.service
23ms alsa-restore.service
19ms user-runtime-dir@1000.service
10ms openvpn.service
4ms tmp.mount
4ms plymouth-quit-wait.service
3ms sys-fs-fuse-connections.mount
3ms sys-kernel-config.mount
francis@francis-G41M-Combo:/etc$ francis@francis-G41M-Combo:/etc$ systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @1min 32.758s
└─udisks2.service @38.537s +54.220s
└─basic.target @33.686s
└─sockets.target @33.686s
└─syslog.socket @37.126s
└─-.mount @5.158s
└─-.slice @5.158s
francis@francis-G41M-Combo:/etc$@geole (#13)
francis@francis-G41M-Combo:/etc$ sudo systemctl --global disable gnome-keyring-daemon.socketRemoved "/etc/systemd/user/sockets.target.wants/gnome-keyring-daemon.socket".
francis@francis-G41M-Combo:/etc$systemctl list-units | grep discover
systemctl list-units | grep discover(pas de réponse)
@inbox (#18)
- syslog : trop long (4 Mo de texte en redirigeant vers fichier texte : 4Mo, je zappe!)
- daemon.log
francis@francis-G41M-Combo:~$ cat /var/log/daemon.log
cat: /var/log/daemon.log: Aucun fichier ou dossier de ce type
francis@francis-G41M-Combo:~$ ??
Vérification faite, il n'existe pas de "daemon.log" dans /var/log !
francis@francis-G41M-Combo:~$ sudo find /var -name "daemon.log"
francis@francis-G41M-Combo:~$Maintenant je vais tenter de passer en Wayland (je n'ai pas de roue crantée !)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#21 Le 06/01/2023, à 15:16
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Bon, j'ai réussi à repasser sous Wayland. Ma CG est bien reconnue, puisque l'écran fonctionne alors qu'il est branché en HDMI, option de la carte graphique et absente de la carte mère.
Le message a changé :
** Message: 15:09:51.825: couldn't access control socket: /run/user/1000/keyring/control: Aucun fichier ou dossier de ce type
discover_other_daemon: 0** Message: 15:09:51.838: couldn't access control socket: /run/user/1000/keyring/control: Aucun fichier ou dossier de ce type
francis@francis-G41M-Combo:~$ (sic) Il s'affiche en double, mais cible l'origine du problème sur "/run/user/1000/keyring/control" qui serait absent ??!! alors que nautilus y voit un fichier control vide
Une réinstallation de keyring pourrait-elle corriger le problème ?
NB : je n'ai pas de problème lié à un mot de passe ni à pgp
[Edit] Après mure réflexion, je n'étais probablement pas sous Wayland. Le nouveau message apparaît aussi sous X11, comme on peut le voir ici :
** Message: 16:10:39.995: couldn't access control socket: /run/user/1000/keyring/control: Aucun fichier ou dossier de ce type
discover_other_daemon: 0** Message: 16:10:40.001: couldn't access control socket: /run/user/1000/keyring/control: Aucun fichier ou dossier de ce type
francis@francis-G41M-Combo:~$ echo "$XDG_SESSION_TYPE"
x11
francis@francis-G41M-Combo:~$[/Edit]
Dernière modification par FrancisFDZ (Le 08/01/2023, à 11:14)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#22 Le 07/01/2023, à 14:45
- FrancisFDZ
Re : [Résolu] Message bizarre au login
Boot suivant : le système est revenu de lui même en Xorg. J'étais Je pensais être passé en Wayland en modifiant "/etc/gdm3/custom.conf" ; ça ne fonctionne plus. Pas possible non plus de faire réapparaître la roue crantée sur la page de connexion.
Bon, tourner sous Wayland n'est pas une priorité, mais j'aimerais savoir !
Dernière modification par FrancisFDZ (Le 07/01/2023, à 16:15)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#23 Le 07/01/2023, à 15:09
- ylag
Re : [Résolu] Message bizarre au login
Bonjour,
Sauf erreur de ma part, la roue crantée devrait apparaître à l'étape de l'entrée du mot de passe, après avoir choisi l'utilisateur sur l'écran de connexion à la session ?
A+
Hors ligne
#24 Le 07/01/2023, à 15:36
- FrancisFDZ
Re : [Résolu] Message bizarre au login
@ylag : ben non, depuis que j'ai validé le login automatique ça ne l'affiche plus (après retour à la connexion avec demande de login, bien sur).
NB : je suis le seul utilisateur.
J'ai réinstallé gnome-keyring : aucun effet
Je commence à envisager la solution "bourrin" : clean réinstall
Dernière modification par FrancisFDZ (Le 07/01/2023, à 15:40)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#25 Le 07/01/2023, à 17:19
- geole
Re : [Résolu] Message bizarre au login
Bonjour
En connexion automatique, on n'a pas le choix de la session. Il faut déactiver et quelquefois créer un second utilisateur.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne