Ubuntu-fr

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

si on reprend par étape:
j'ai supprimer toutes les imprimantes (celles dans paramètres/imprimantes + paramètres/imprimantes/paramètres d'imprimantes supplémentaire): tout est vide

j'ai rebooté

dans paramètres/imprimantes: il y a une imprimante MFC-L3750 CDWseries avec comme adresse: MFC-L3750CDW series. ipp. tcp.local et comme pilote: Brother Brother MFC-L3750CDW series[en]
paramètres/imprimantes/paramètres d'imprimantes supplémentaire: il y a une imprimante MFC_L3750CDW_series avec uri du périphérique: implicitclass://MFC_L3750CDW_series/

l'imprimante imprime

concernant le scanner:
. ESCL MFC-L3750 CDW series on escl:http://localhost:60000
. ESCL MFC-L3750 CDWseries on airscan:e0:MFCL3750CDWseries
. brother MFC-L3750 CDW

là, est ce que modifie quelque chose?

eric63

Re : scanner MFC-L3750CDW [résolu] (voir #140)

ben est ce que tu peux modifier quelque chose ?
ESCL MFC-L3750 CDWseries on airscan:e0:MFCL3750CDWseries ce serait celle en wifi générique
ESCL MFC-L3750 CDW series on escl:http://localhost:60000 serait un wifi ?  ou un cups local bizarre
brother MFC-L3750 CDW ce serait l’usb

donc il n’y aurait que le 3 qui serait ok pour toi puisque tu ne veux pas de wifi

---

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

depuis que je t'ai écrit, je cherche pour modifier le 60000 par exemple, ou simplement supprimer celle en wifi, mais je ne trouve pas

donc la plus "normale" serait la N°3 pour l'usb

je refais le script?

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

ben est ce que tu peux modifier quelque chose ?

ce ne sont que les périphériques de numérisation qu'on me propose lorsque j'ouvre simple scan.
je ne retrouve pas ces infos dans les paramètres imprimantes

eric63

Re : scanner MFC-L3750CDW [résolu] (voir #140)

dans les 3 pilotes proposés pour les scan  il doit y avoir des restes d’anciens essais de connexions tu ne devrais en avoir qu’un
je ne comprends pas pourquoi tu as ces 3 pilotes constamment.
je ne sais pas comment les éradiquer pour l’instant ni à quoi ils correspondent vraiment: je doute.
je vais  rechercher

bon j’ai trouvé un début d’explication à ces connexions qui me semblait bizarre
https://doc.ubuntu-fr.org/tutoriel/inst … einstalles

pour savoir si tu as un scanner reconnu

sudo sane-find-scanner -q

Dernière modification par eric63 (Le 30/10/2022, à 23:25)

---

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

c'est exactement ce que je soupçonne. des manipulations et essais qui perturbent le scanner

pour ta  réponse: (pas fou comme réponse)

vadee@vadee:~$ sudo sane-find-scanner -q
[sudo] Mot de passe de vadee : 
vadee@vadee:~$ 

xubu1957

Re : scanner MFC-L3750CDW [résolu] (voir #140)

Bonjour,

Montre :

SANE_DEBUG_DLL=5 scanimage -L

piqué dans Fix for USB scanner not working on LM20 that worked on LM19

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

eric63

Re : scanner MFC-L3750CDW [résolu] (voir #140)

très intéressant ce fil
je ne m’étonne plus d’être largué sur le sujet
à priori de nouveaux paquets ont été créés qui permettent la reconnaissance automatique des multifonctions imprimantes et scanners sans utiliser les paquets propriétaires, ceux fournit par les scripts notamment
et les premiers ne sont pas compatibles avec les seconds
et de plus leurs apparitions n’a pas été documentées donc des personnes comme moi n’ont rien vu venir et ont continué sur leur anciennes façon de faire
Moi j’avais mis la reconnaissance automatique sur une prise en compte par le noyau. J’y étais pas du tout !
La doc ubuntu a changé sur le sujet et je ne l’avais pas regardé avant puisque cela fonctionnait

Pour une connexion usb. Je vois aussi qu’il est préconisé de purger

sudo apt purge ippusbxd

et de le remplacer par

ipp-usb

fournit avec le paquet sane-airscan

bon je vais potasser le lien fournit par Xubu1957 qui est bien trouvé
je pense que je vais devoir demandé à Goliath60 de supprimer les paquets installés avec le script la dernière commande en #131 dit que le scanner n’est pas trouvé
et de commencer à mettre en place la phase reconnaissance automatique dans un premier temps
On nait pas sorti de la berge

tiré du forum debian
wahou une vrai découverte pour moi et une mine d’infos je vous recommande fortement la lecture avec votre traducteur
bon a priori il faut pour la reconnaissance automatique les paquets:
sane-airscan
et pour voir si la multifonction est éligible au moins en wifi

airscan-discover

il faut aussi pour une reconnaissance en usb (qui est indépendante du wifi/ethernet)
les paquets  sane-airscan et ipp-usb
Pour voir si c’est effectif

systemctl status ipp-usb

avec ces nouveaux protocoles Une imprimante connectée par USB est donc considérée comme une imprimante réseau lorsque IPP-over-USB (ipp-usb) est utilisé.
Important :
ces protocoles fonctionnement pour de nombreuses marques et n’ont pas besoin de paquets propriétaires

Dernière modification par eric63 (Le 31/10/2022, à 09:40)

---

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

pour répondre à xubu1957:

vadee@vadee:~$ SANE_DEBUG_DLL=5 scanimage -L
[18:05:17.150249] [sanei_debug] Setting debug level of dll to 5.
[18:05:17.150374] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.1.1.335-436c5
[18:05:17.150418] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[18:05:17.150456] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[18:05:17.150509] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[18:05:17.150568] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[18:05:17.150613] [dll] sane_init/read_config: reading dll.d/hplip
[18:05:17.150668] [dll] add_backend: adding backend `hpaio'
[18:05:17.150699] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/airscan
[18:05:17.150742] [dll] sane_init/read_config: reading dll.d/airscan
[18:05:17.150779] [dll] add_backend: adding backend `airscan'
[18:05:17.150812] [dll] sane_init/read_dlld: done.
[18:05:17.150849] [dll] sane_init/read_config: reading dll.conf
[18:05:17.150894] [dll] add_backend: adding backend `net'
[18:05:17.150918] [dll] add_backend: adding backend `abaton'
[18:05:17.150942] [dll] add_backend: adding backend `agfafocus'
[18:05:17.150964] [dll] add_backend: adding backend `apple'
[18:05:17.150987] [dll] add_backend: adding backend `artec'
[18:05:17.151022] [dll] add_backend: adding backend `artec_eplus48u'
[18:05:17.151048] [dll] add_backend: adding backend `as6e'
[18:05:17.151072] [dll] add_backend: adding backend `avision'
[18:05:17.151097] [dll] add_backend: adding backend `bh'
[18:05:17.151121] [dll] add_backend: adding backend `canon'
[18:05:17.151145] [dll] add_backend: adding backend `canon630u'
[18:05:17.151169] [dll] add_backend: adding backend `canon_dr'
[18:05:17.151194] [dll] add_backend: adding backend `canon_lide70'
[18:05:17.151218] [dll] add_backend: adding backend `cardscan'
[18:05:17.151241] [dll] add_backend: adding backend `coolscan'
[18:05:17.151266] [dll] add_backend: adding backend `coolscan3'
[18:05:17.151291] [dll] add_backend: adding backend `dell1600n_net'
[18:05:17.151315] [dll] add_backend: adding backend `dmc'
[18:05:17.151340] [dll] add_backend: adding backend `epjitsu'
[18:05:17.151366] [dll] add_backend: adding backend `epson2'
[18:05:17.151391] [dll] add_backend: adding backend `epsonds'
[18:05:17.151416] [dll] add_backend: adding backend `escl'
[18:05:17.151440] [dll] add_backend: adding backend `fujitsu'
[18:05:17.151465] [dll] add_backend: adding backend `genesys'
[18:05:17.151490] [dll] add_backend: adding backend `gt68xx'
[18:05:17.151515] [dll] add_backend: adding backend `hp'
[18:05:17.151544] [dll] add_backend: adding backend `hp3500'
[18:05:17.151573] [dll] add_backend: adding backend `hp3900'
[18:05:17.151597] [dll] add_backend: adding backend `hp4200'
[18:05:17.151621] [dll] add_backend: adding backend `hp5400'
[18:05:17.151647] [dll] add_backend: adding backend `hp5590'
[18:05:17.151672] [dll] add_backend: adding backend `hpljm1005'
[18:05:17.151703] [dll] add_backend: adding backend `hpsj5s'
[18:05:17.151728] [dll] add_backend: adding backend `hs2p'
[18:05:17.151756] [dll] add_backend: adding backend `ibm'
[18:05:17.151783] [dll] add_backend: adding backend `kodak'
[18:05:17.151811] [dll] add_backend: adding backend `kodakaio'
[18:05:17.151838] [dll] add_backend: adding backend `kvs1025'
[18:05:17.151863] [dll] add_backend: adding backend `kvs20xx'
[18:05:17.151892] [dll] add_backend: adding backend `kvs40xx'
[18:05:17.151919] [dll] add_backend: adding backend `leo'
[18:05:17.151943] [dll] add_backend: adding backend `lexmark'
[18:05:17.151967] [dll] add_backend: adding backend `ma1509'
[18:05:17.151991] [dll] add_backend: adding backend `magicolor'
[18:05:17.152018] [dll] add_backend: adding backend `matsushita'
[18:05:17.152043] [dll] add_backend: adding backend `microtek'
[18:05:17.152072] [dll] add_backend: adding backend `microtek2'
[18:05:17.152096] [dll] add_backend: adding backend `mustek'
[18:05:17.152122] [dll] add_backend: adding backend `mustek_usb'
[18:05:17.152145] [dll] add_backend: adding backend `mustek_usb2'
[18:05:17.152169] [dll] add_backend: adding backend `nec'
[18:05:17.152192] [dll] add_backend: adding backend `niash'
[18:05:17.152217] [dll] add_backend: adding backend `pie'
[18:05:17.152241] [dll] add_backend: adding backend `pieusb'
[18:05:17.152264] [dll] add_backend: adding backend `pint'
[18:05:17.152305] [dll] add_backend: adding backend `pixma'
[18:05:17.152333] [dll] add_backend: adding backend `plustek'
[18:05:17.152354] [dll] add_backend: adding backend `qcam'
[18:05:17.152374] [dll] add_backend: adding backend `ricoh'
[18:05:17.152393] [dll] add_backend: adding backend `ricoh2'
[18:05:17.152413] [dll] add_backend: adding backend `rts8891'
[18:05:17.152433] [dll] add_backend: adding backend `s9036'
[18:05:17.152453] [dll] add_backend: adding backend `sceptre'
[18:05:17.152472] [dll] add_backend: adding backend `sharp'
[18:05:17.152492] [dll] add_backend: adding backend `sm3600'
[18:05:17.152540] [dll] add_backend: adding backend `sm3840'
[18:05:17.152560] [dll] add_backend: adding backend `snapscan'
[18:05:17.152581] [dll] add_backend: adding backend `sp15c'
[18:05:17.152601] [dll] add_backend: adding backend `tamarack'
[18:05:17.152621] [dll] add_backend: adding backend `teco1'
[18:05:17.152641] [dll] add_backend: adding backend `teco2'
[18:05:17.152661] [dll] add_backend: adding backend `teco3'
[18:05:17.152681] [dll] add_backend: adding backend `u12'
[18:05:17.152701] [dll] add_backend: adding backend `umax'
[18:05:17.152720] [dll] add_backend: adding backend `umax1220u'
[18:05:17.152741] [dll] add_backend: adding backend `v4l'
[18:05:17.152760] [dll] add_backend: adding backend `xerox_mfp'
[18:05:17.152781] [dll] add_backend: adding backend `brother4'
[18:05:17.152839] [dll] sane_get_devices
[18:05:17.152861] [dll] load: searching backend `brother4' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.152879] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother4.so.1'
[18:05:17.152934] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother4.so.1'
[18:05:17.153479] [dll] init: initializing backend `brother4'
[18:05:17.950384] [dll] init: backend `brother4' is version 1.0.1
[18:05:17.950441] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.950471] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[18:05:17.950508] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[18:05:17.950785] [dll] init: initializing backend `xerox_mfp'
[18:05:17.960224] [dll] init: backend `xerox_mfp' is version 1.0.13
[18:05:17.960445] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.960467] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[18:05:17.960508] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[18:05:17.960534] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[18:05:17.960561] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[18:05:17.960582] [dll] load: couldn't find backend `v4l' (No such file or directory)
[18:05:17.960602] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.960621] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[18:05:17.960669] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[18:05:17.960985] [dll] init: initializing backend `umax1220u'
[18:05:17.970406] [dll] init: backend `umax1220u' is version 1.0.2
[18:05:17.970447] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.970464] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[18:05:17.970497] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[18:05:17.970783] [dll] init: initializing backend `umax'
[18:05:17.986493] [dll] init: backend `umax' is version 1.0.45
[18:05:17.986544] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.986573] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[18:05:17.986611] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[18:05:17.986896] [dll] init: initializing backend `u12'
[18:05:17.996119] [dll] init: backend `u12' is version 1.0.0
[18:05:17.996158] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.996175] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[18:05:17.996213] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[18:05:17.996394] [dll] init: initializing backend `teco3'
[18:05:17.998881] [dll] init: backend `teco3' is version 1.0.1
[18:05:17.998909] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:17.998926] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[18:05:17.998960] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[18:05:17.999132] [dll] init: initializing backend `teco2'
[18:05:18.003177] [dll] init: backend `teco2' is version 1.0.10
[18:05:18.003209] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.003227] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[18:05:18.003258] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[18:05:18.003423] [dll] init: initializing backend `teco1'
[18:05:18.006295] [dll] init: backend `teco1' is version 1.0.10
[18:05:18.006328] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.006345] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[18:05:18.006377] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[18:05:18.006550] [dll] init: initializing backend `tamarack'
[18:05:18.007699] [dll] init: backend `tamarack' is version 1.0.0
[18:05:18.007732] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.007749] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[18:05:18.007782] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[18:05:18.007945] [dll] init: initializing backend `sp15c'
[18:05:18.008370] [dll] init: backend `sp15c' is version 1.0.0
[18:05:18.008392] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.008413] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[18:05:18.008450] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[18:05:18.008713] [dll] init: initializing backend `snapscan'
[18:05:18.018609] [dll] init: backend `snapscan' is version 1.4.53
[18:05:18.018645] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.018669] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[18:05:18.018703] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[18:05:18.018936] [dll] init: initializing backend `sm3840'
[18:05:18.025201] [dll] init: backend `sm3840' is version 1.0.0
[18:05:18.025223] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.025246] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[18:05:18.025279] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[18:05:18.025527] [dll] init: initializing backend `sm3600'
[18:05:18.031081] [dll] init: backend `sm3600' is version 1.0.6
[18:05:18.031107] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.031116] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[18:05:18.031140] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[18:05:18.031290] [dll] init: initializing backend `sharp'
[18:05:18.031949] [dll] init: backend `sharp' is version 1.0.0
[18:05:18.031970] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.031979] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[18:05:18.031997] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[18:05:18.032093] [dll] init: initializing backend `sceptre'
[18:05:18.032746] [dll] init: backend `sceptre' is version 1.0.10
[18:05:18.032767] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.032776] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[18:05:18.032794] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[18:05:18.032883] [dll] init: initializing backend `s9036'
[18:05:18.033312] [dll] init: backend `s9036' is version 1.0.0
[18:05:18.033333] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.033341] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[18:05:18.033358] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[18:05:18.033498] [dll] init: initializing backend `rts8891'
[18:05:18.038174] [dll] init: backend `rts8891' is version 1.0.2401
[18:05:18.038257] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.038271] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[18:05:18.038293] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[18:05:18.038436] [dll] init: initializing backend `ricoh2'
[18:05:18.043846] [dll] init: backend `ricoh2' is version 1.0.0
[18:05:18.043881] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.043890] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[18:05:18.043921] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[18:05:18.044108] [dll] init: initializing backend `ricoh'
[18:05:18.044572] [dll] init: backend `ricoh' is version 1.0.0
[18:05:18.044584] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.044592] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[18:05:18.044613] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[18:05:18.044707] [dll] init: initializing backend `qcam'
[18:05:18.044750] [dll] init: backend `qcam' is version 1.0.0
[18:05:18.044759] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.044767] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[18:05:18.044784] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[18:05:18.044932] [dll] init: initializing backend `plustek'
[18:05:18.049724] [dll] init: backend `plustek' is version 1.0.0
[18:05:18.049751] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.049759] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[18:05:18.049775] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[18:05:18.049970] [dll] init: initializing backend `pixma'
[18:05:18.054394] [dll] init: backend `pixma' is version 1.0.28
[18:05:18.575723] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.575783] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[18:05:18.575816] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[18:05:18.575854] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[18:05:18.575885] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[18:05:18.575908] [dll] load: couldn't find backend `pint' (No such file or directory)
[18:05:18.575940] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.575966] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[18:05:18.576025] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[18:05:18.576381] [dll] init: initializing backend `pieusb'
[18:05:18.585569] [dll] init: backend `pieusb' is version 1.0.1
[18:05:18.585606] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.585623] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[18:05:18.585660] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[18:05:18.585860] [dll] init: initializing backend `pie'
[18:05:18.587898] [dll] init: backend `pie' is version 1.0.9
[18:05:18.587941] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.587962] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[18:05:18.588006] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[18:05:18.588282] [dll] init: initializing backend `niash'
[18:05:18.597439] [dll] init: backend `niash' is version 1.0.1
[18:05:18.597482] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.597500] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[18:05:18.597550] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[18:05:18.597841] [dll] init: initializing backend `nec'
[18:05:18.598687] [dll] init: backend `nec' is version 1.0.0
[18:05:18.598721] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.598738] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[18:05:18.598770] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[18:05:18.599015] [dll] init: initializing backend `mustek_usb2'
[18:05:18.599059] [dll] init: backend `mustek_usb2' is version 1.0.10
[18:05:18.609188] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.609233] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[18:05:18.609284] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[18:05:18.609657] [dll] init: initializing backend `mustek_usb'
[18:05:18.619248] [dll] init: backend `mustek_usb' is version 1.0.18
[18:05:18.619278] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.619303] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[18:05:18.619348] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[18:05:18.619741] [dll] init: initializing backend `mustek'
[18:05:18.621606] [dll] init: backend `mustek' is version 1.0.138
[18:05:18.621641] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.621658] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[18:05:18.621696] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[18:05:18.621883] [dll] init: initializing backend `microtek2'
[18:05:18.623070] [dll] init: backend `microtek2' is version 1.0.0
[18:05:18.623109] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.623127] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[18:05:18.623167] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[18:05:18.623352] [dll] init: initializing backend `microtek'
[18:05:18.624826] [dll] init: backend `microtek' is version 1.0.0
[18:05:18.624855] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.624872] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[18:05:18.624907] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[18:05:18.625095] [dll] init: initializing backend `matsushita'
[18:05:18.627724] [dll] init: backend `matsushita' is version 1.0.7
[18:05:18.627752] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:18.627769] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[18:05:18.627800] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[18:05:18.630334] [dll] init: initializing backend `magicolor'
[18:05:18.640673] [dll] init: backend `magicolor' is version 1.0.1
[18:05:20.149216] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:20.149271] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[18:05:20.149322] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[18:05:20.149657] [dll] init: initializing backend `ma1509'
[18:05:20.159123] [dll] init: backend `ma1509' is version 1.0.3
[18:05:20.159162] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:20.159179] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[18:05:20.159216] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[18:05:20.159484] [dll] init: initializing backend `lexmark'
[18:05:20.169224] [dll] init: backend `lexmark' is version 1.0.32
[18:05:20.169390] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:20.169420] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[18:05:20.169463] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[18:05:20.169702] [dll] init: initializing backend `leo'
[18:05:20.171271] [dll] init: backend `leo' is version 1.0.11
[18:05:20.171300] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:20.171328] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[18:05:20.171374] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[18:05:20.171630] [dll] init: initializing backend `kvs40xx'
[18:05:20.180857] [dll] init: backend `kvs40xx' is version 1.0.1
[18:05:20.182031] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:20.182077] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[18:05:20.182124] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[18:05:20.182398] [dll] init: initializing backend `kvs20xx'
[18:05:20.191588] [dll] init: backend `kvs20xx' is version 1.0.2
[18:05:20.193847] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:20.193880] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[18:05:20.193915] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[18:05:20.194194] [dll] init: initializing backend `kvs1025'
[18:05:20.203508] [dll] init: backend `kvs1025' is version 1.0.5
[18:05:20.203546] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:20.203563] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[18:05:20.203600] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[18:05:20.205717] [dll] init: initializing backend `kodakaio'
[18:05:20.215042] [dll] init: backend `kodakaio' is version 1.0.3
[18:05:22.127417] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.127476] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[18:05:22.127532] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[18:05:22.127852] [dll] init: initializing backend `kodak'
[18:05:22.127946] [dll] init: backend `kodak' is version 1.0.7
[18:05:22.128615] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.128651] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[18:05:22.128701] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[18:05:22.128917] [dll] init: initializing backend `ibm'
[18:05:22.129724] [dll] init: backend `ibm' is version 1.0.0
[18:05:22.129755] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.129772] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[18:05:22.129804] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[18:05:22.129976] [dll] init: initializing backend `hs2p'
[18:05:22.131121] [dll] init: backend `hs2p' is version 1.0.0
[18:05:22.131148] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.131165] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[18:05:22.131200] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[18:05:22.131403] [dll] init: initializing backend `hpsj5s'
[18:05:22.131489] [dll] init: backend `hpsj5s' is version 1.0.3
[18:05:22.131512] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.131533] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[18:05:22.131571] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[18:05:22.131805] [dll] init: initializing backend `hpljm1005'
[18:05:22.141248] [dll] init: backend `hpljm1005' is version 1.0.1
[18:05:22.141291] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.141310] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[18:05:22.141354] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[18:05:22.141712] [dll] init: initializing backend `hp5590'
[18:05:22.150868] [dll] init: backend `hp5590' is version 1.0.8
[18:05:22.150896] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.150928] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[18:05:22.150984] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[18:05:22.151301] [dll] init: initializing backend `hp5400'
[18:05:22.161396] [dll] init: backend `hp5400' is version 1.0.3
[18:05:22.161443] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.161461] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[18:05:22.161500] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[18:05:22.161817] [dll] init: initializing backend `hp4200'
[18:05:22.171755] [dll] init: backend `hp4200' is version 1.0.0
[18:05:22.171800] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.171818] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[18:05:22.171851] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[18:05:22.172893] [dll] init: initializing backend `hp3900'
[18:05:22.182356] [dll] init: backend `hp3900' is version 1.0.0
[18:05:22.182403] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.182421] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[18:05:22.182470] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[18:05:22.182760] [dll] init: initializing backend `hp3500'
[18:05:22.192418] [dll] init: backend `hp3500' is version 1.0.0
[18:05:22.192465] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.192484] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[18:05:22.192560] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[18:05:22.193001] [dll] init: initializing backend `hp'
[18:05:22.193061] [dll] init: backend `hp' is version 1.0.8
[18:05:22.204167] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.204212] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[18:05:22.204254] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[18:05:22.204698] [dll] init: initializing backend `gt68xx'
[18:05:22.211444] [dll] init: backend `gt68xx' is version 1.0.84
[18:05:22.211603] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.211618] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[18:05:22.211644] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[18:05:22.212263] [dll] init: initializing backend `genesys'
[18:05:22.218739] [dll] init: backend `genesys' is version 1.0.0
[18:05:22.218849] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.218862] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[18:05:22.218883] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[18:05:22.219085] [dll] init: initializing backend `fujitsu'
[18:05:22.219113] [dll] init: backend `fujitsu' is version 1.0.138
[18:05:22.224877] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.224910] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[18:05:22.224928] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[18:05:22.236586] [dll] init: initializing backend `escl'
[18:05:22.236619] [dll] init: backend `escl' is version 1.0.0
[18:05:22.250536] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.250571] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[18:05:22.250620] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[18:05:22.250984] [dll] init: initializing backend `epsonds'
[18:05:22.256054] [dll] init: backend `epsonds' is version 1.0.0
[18:05:22.269492] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:22.269528] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[18:05:22.269580] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[18:05:22.269979] [dll] init: initializing backend `epson2'
[18:05:22.277107] [dll] init: backend `epson2' is version 1.0.124
[18:05:23.278729] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.278787] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[18:05:23.278854] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[18:05:23.279351] [dll] init: initializing backend `epjitsu'
[18:05:23.279393] [dll] init: backend `epjitsu' is version 1.0.31
[18:05:23.288931] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.288973] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[18:05:23.289006] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[18:05:23.289296] [dll] init: initializing backend `dmc'
[18:05:23.290127] [dll] init: backend `dmc' is version 1.0.0
[18:05:23.290150] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.290172] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[18:05:23.290212] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[18:05:23.290486] [dll] init: initializing backend `dell1600n_net'
[18:05:23.290512] [dll] init: backend `dell1600n_net' is version 1.0.0
[18:05:23.591107] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.591168] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[18:05:23.591222] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[18:05:23.591613] [dll] init: initializing backend `coolscan3'
[18:05:23.600791] [dll] init: backend `coolscan3' is version 1.0.0
[18:05:23.601325] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.601358] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[18:05:23.601390] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[18:05:23.601719] [dll] init: initializing backend `coolscan'
[18:05:23.602886] [dll] init: backend `coolscan' is version 1.0.0
[18:05:23.602910] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.602932] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[18:05:23.602968] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[18:05:23.603212] [dll] init: initializing backend `cardscan'
[18:05:23.612421] [dll] init: backend `cardscan' is version 1.0.3
[18:05:23.612583] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.612607] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[18:05:23.612650] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[18:05:23.612993] [dll] init: initializing backend `canon_lide70'
[18:05:23.622883] [dll] init: backend `canon_lide70' is version 1.0.0
[18:05:23.622931] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.622949] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[18:05:23.622984] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[18:05:23.623374] [dll] init: initializing backend `canon_dr'
[18:05:23.623422] [dll] init: backend `canon_dr' is version 1.0.62
[18:05:23.633871] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.633910] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[18:05:23.633944] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[18:05:23.634286] [dll] init: initializing backend `canon630u'
[18:05:23.644127] [dll] init: backend `canon630u' is version 1.0.1
[18:05:23.644172] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.644190] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[18:05:23.644224] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[18:05:23.644561] [dll] init: initializing backend `canon'
[18:05:23.645035] [dll] init: backend `canon' is version 1.0.0
[18:05:23.645063] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.645080] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[18:05:23.645112] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[18:05:23.645319] [dll] init: initializing backend `bh'
[18:05:23.646483] [dll] init: backend `bh' is version 1.0.4
[18:05:23.646512] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.646529] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[18:05:23.646560] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[18:05:23.646870] [dll] init: initializing backend `avision'
[18:05:23.678921] [dll] init: backend `avision' is version 1.0.297
[18:05:23.693598] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.693633] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[18:05:23.693660] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[18:05:23.693869] [dll] init: initializing backend `as6e'
[18:05:23.693913] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.693922] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[18:05:23.693944] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[18:05:23.694117] [dll] init: initializing backend `artec_eplus48u'
[18:05:23.699091] [dll] init: backend `artec_eplus48u' is version 1.0.0
[18:05:23.699116] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.699125] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[18:05:23.699141] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[18:05:23.699280] [dll] init: initializing backend `artec'
[18:05:23.699871] [dll] init: backend `artec' is version 1.0.0
[18:05:23.699892] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.699900] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[18:05:23.699916] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[18:05:23.700008] [dll] init: initializing backend `apple'
[18:05:23.700600] [dll] init: backend `apple' is version 1.0.0
[18:05:23.700621] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.700630] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[18:05:23.700645] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[18:05:23.700749] [dll] init: initializing backend `agfafocus'
[18:05:23.701143] [dll] init: backend `agfafocus' is version 1.0.0
[18:05:23.701163] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.701171] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[18:05:23.701186] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[18:05:23.701277] [dll] init: initializing backend `abaton'
[18:05:23.701886] [dll] init: backend `abaton' is version 1.0.0
[18:05:23.701911] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.701922] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[18:05:23.701945] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[18:05:23.702173] [dll] init: initializing backend `net'
[18:05:23.704333] [dll] init: backend `net' is version 1.1.1
[18:05:23.704360] [dll] load: searching backend `airscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.704377] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1'
[18:05:23.704406] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1'
[18:05:23.705058] [dll] init: initializing backend `airscan'
[18:05:23.709072] [dll] init: backend `airscan' is version 1.0.0
[18:05:23.719737] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[18:05:23.719767] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[18:05:23.719822] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[18:05:23.720929] [dll] init: initializing backend `hpaio'
[18:05:23.721954] [dll] init: backend `hpaio' is version 1.0.0
[18:05:23.744947] [dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[18:05:23.745014] [dll] sane_exit: exiting
[18:05:23.745027] [dll] sane_exit: calling backend `brother4's exit function
[18:05:23.745254] [dll] sane_exit: calling backend `xerox_mfp's exit function
[18:05:23.745318] [dll] sane_exit: calling backend `umax1220u's exit function
[18:05:23.745377] [dll] sane_exit: calling backend `umax's exit function
[18:05:23.745444] [dll] sane_exit: calling backend `u12's exit function
[18:05:23.745506] [dll] sane_exit: calling backend `teco3's exit function
[18:05:23.745574] [dll] sane_exit: calling backend `teco2's exit function
[18:05:23.745632] [dll] sane_exit: calling backend `teco1's exit function
[18:05:23.745687] [dll] sane_exit: calling backend `tamarack's exit function
[18:05:23.745735] [dll] sane_exit: calling backend `sp15c's exit function
[18:05:23.745782] [dll] sane_exit: calling backend `snapscan's exit function
[18:05:23.745834] [dll] sane_exit: calling backend `sm3840's exit function
[18:05:23.745883] [dll] sane_exit: calling backend `sm3600's exit function
[18:05:23.745933] [dll] sane_exit: calling backend `sharp's exit function
[18:05:23.745978] [dll] sane_exit: calling backend `sceptre's exit function
[18:05:23.746024] [dll] sane_exit: calling backend `s9036's exit function
[18:05:23.746068] [dll] sane_exit: calling backend `rts8891's exit function
[18:05:23.746125] [dll] sane_exit: calling backend `ricoh2's exit function
[18:05:23.746192] [dll] sane_exit: calling backend `ricoh's exit function
[18:05:23.746238] [dll] sane_exit: calling backend `qcam's exit function
[18:05:23.746285] [dll] sane_exit: calling backend `plustek's exit function
[18:05:23.746337] [dll] sane_exit: calling backend `pixma's exit function
[18:05:23.746401] [dll] sane_exit: calling backend `pieusb's exit function
[18:05:23.746451] [dll] sane_exit: calling backend `pie's exit function
[18:05:23.746497] [dll] sane_exit: calling backend `niash's exit function
[18:05:23.746548] [dll] sane_exit: calling backend `nec's exit function
[18:05:23.746593] [dll] sane_exit: calling backend `mustek_usb2's exit function
[18:05:23.746641] [dll] sane_exit: calling backend `mustek_usb's exit function
[18:05:23.746690] [dll] sane_exit: calling backend `mustek's exit function
[18:05:23.746738] [dll] sane_exit: calling backend `microtek2's exit function
[18:05:23.746783] [dll] sane_exit: calling backend `microtek's exit function
[18:05:23.746828] [dll] sane_exit: calling backend `matsushita's exit function
[18:05:23.746874] [dll] sane_exit: calling backend `magicolor's exit function
[18:05:23.746925] [dll] sane_exit: calling backend `ma1509's exit function
[18:05:23.746973] [dll] sane_exit: calling backend `lexmark's exit function
[18:05:23.747033] [dll] sane_exit: calling backend `leo's exit function
[18:05:23.747076] [dll] sane_exit: calling backend `kvs40xx's exit function
[18:05:23.747125] [dll] sane_exit: calling backend `kvs20xx's exit function
[18:05:23.747174] [dll] sane_exit: calling backend `kvs1025's exit function
[18:05:23.747219] [dll] sane_exit: calling backend `kodakaio's exit function
[18:05:23.747270] [dll] sane_exit: calling backend `kodak's exit function
[18:05:23.747315] [dll] sane_exit: calling backend `ibm's exit function
[18:05:23.747357] [dll] sane_exit: calling backend `hs2p's exit function
[18:05:23.747400] [dll] sane_exit: calling backend `hpsj5s's exit function
[18:05:23.747453] [dll] sane_exit: calling backend `hpljm1005's exit function
[18:05:23.747497] [dll] sane_exit: calling backend `hp5590's exit function
[18:05:23.747546] [dll] sane_exit: calling backend `hp5400's exit function
[18:05:23.747598] [dll] sane_exit: calling backend `hp4200's exit function
[18:05:23.747650] [dll] sane_exit: calling backend `hp3900's exit function
[18:05:23.747710] [dll] sane_exit: calling backend `hp3500's exit function
[18:05:23.747769] [dll] sane_exit: calling backend `hp's exit function
[18:05:23.747834] [dll] sane_exit: calling backend `gt68xx's exit function
[18:05:23.747912] [dll] sane_exit: calling backend `genesys's exit function
[18:05:23.748183] [dll] sane_exit: calling backend `fujitsu's exit function
[18:05:23.748258] [dll] sane_exit: calling backend `escl's exit function
[18:05:23.749040] [dll] sane_exit: calling backend `epsonds's exit function
[18:05:23.749091] [dll] sane_exit: calling backend `epson2's exit function
[18:05:23.749133] [dll] sane_exit: calling backend `epjitsu's exit function
[18:05:23.749176] [dll] sane_exit: calling backend `dmc's exit function
[18:05:23.749214] [dll] sane_exit: calling backend `dell1600n_net's exit function
[18:05:23.749313] [dll] sane_exit: calling backend `coolscan3's exit function
[18:05:23.749350] [dll] sane_exit: calling backend `coolscan's exit function
[18:05:23.749386] [dll] sane_exit: calling backend `cardscan's exit function
[18:05:23.749422] [dll] sane_exit: calling backend `canon_lide70's exit function
[18:05:23.749460] [dll] sane_exit: calling backend `canon_dr's exit function
[18:05:23.749499] [dll] sane_exit: calling backend `canon630u's exit function
[18:05:23.749534] [dll] sane_exit: calling backend `canon's exit function
[18:05:23.749567] [dll] sane_exit: calling backend `bh's exit function
[18:05:23.749600] [dll] sane_exit: calling backend `avision's exit function
[18:05:23.749655] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[18:05:23.749689] [dll] sane_exit: calling backend `artec's exit function
[18:05:23.749723] [dll] sane_exit: calling backend `apple's exit function
[18:05:23.749754] [dll] sane_exit: calling backend `agfafocus's exit function
[18:05:23.749786] [dll] sane_exit: calling backend `abaton's exit function
[18:05:23.749816] [dll] sane_exit: calling backend `net's exit function
[18:05:23.750290] [dll] sane_exit: calling backend `airscan's exit function
[18:05:23.751729] [dll] sane_exit: calling backend `hpaio's exit function
[18:05:23.752750] [dll] sane_exit: finished
vadee@vadee:~$ 

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

post 134!!!

je souhaitais simplement vous remercier pour votre patience et votre échange du savoir

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

je me demande si je n'ai pas une une connerie...

j'ai relu 10 fois le post #143 de eric63, en me posant la question si je devais effectuer les 2 premières commandes ou si c'était juste un constat de eric63 suite à sa lecture de documents.
j'ai vu que la dernière commande reparlait de ipp-usb

tout ça pour dire que j'ai effectué ces 2 commandes. et ça reste bloqué avec le point clignotant, ça ne revient pas sur le ~$

vadee@vadee:~$ sudo apt purge ippusbxd
[sudo] Mot de passe de vadee : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Le paquet suivant a été installé automatiquement et n'est plus nécessaire :
  sane-airscan
Veuillez utiliser « sudo apt autoremove » pour le supprimer.
Les paquets suivants seront ENLEVÉS :
  ippusbxd*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 110 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 208462 fichiers et répertoires déjà installés.)
Suppression de ippusbxd (1.34-2ubuntu1) ...
Traitement des actions différées (« triggers ») pour man-db (2.10.2-1) ...
(Lecture de la base de données... 208451 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de ippusbxd (1.34-2ubuntu1) ...
vadee@vadee:~$ ipp-usb
This program requires root privileges
vadee@vadee:~$ sudo ipp-usb
  ===============================
  ipp-usb started in "debug" mode, pid=27109
 

je n'ai pas fermé le terminal, je vais attendre

pour les 2 dernières commandes, c'est pareil, ça ne revient pas sur le ~$

adee@vadee:~$ airscan-discover
[devices]
vadee@vadee:~$ systemctl status ipp-usb
○ ipp-usb.service - Daemon for IPP over USB printer support
     Loaded: loaded (/lib/systemd/system/ipp-usb.service; static)
     Active: inactive (dead)
       Docs: man:ipp-usb(8)

oct. 30 20:25:08 vadee systemd[1]: Started Daemon for IPP over USB printer supp>
oct. 30 23:17:07 vadee systemd[1]: ipp-usb.service: Deactivated successfully.
oct. 30 23:17:07 vadee systemd[1]: ipp-usb.service: Consumed 17.970s CPU time.

vous avez le droit de dire si j'ai merdé...

Dernière modification par goliath60 (Le 31/10/2022, à 19:05)

eric63

Re : scanner MFC-L3750CDW [résolu] (voir #140)

je sais pas si t’as merdé mais il me semble que non
donc tu as quasi les mêmes choses que moi
sauf airscan-discover qui ne trouve rien sur ton réseau wifi bizarre car moi j’ai mon imprimante

ce que j’ai fait à ce stade
reboot ordi
puis ajouter une nouvelle imprimante
donc là la doc spécifie qu’il ne faut pas choisir l’imprimante locale usb mais choisir une imprimante sur le réseau découverte
je n’en avais pas donc j’ai choisi «autres imprimantes réseau»
et internet printing protocol (ipp) puis dans le champ «connexion»:
ipp://lemodèle de la machine puis /ipp/ 
(soit ipp://mfc-j4510dw/ipp/  pour moi)
après suivant et choisir la marque; le modèle; le pilote driverless; cups-filters
ta multifonction est installé
choisi la par défaut et fait un essai d’impression et de scan
si tu as pour le scan des choix de pilotes
je ne sais pas encore enlever les superflus

---

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

reboot: fait

l'imprimante est éteinte: paramètre/imprimante: tout est vide, pas d'imprimante

j'allume l'imprimante:
paramètre/imprimante: une imprimante est automatiquement détectée: Brother_MFC_L3750CDW_series_USB: je n'en tient pas compte

j'ajoute une nouvelle imprimante, imprimante réseau, internet printing puis je rempli le champ connexion

pour le choix du pilote, il y en a qu'un:

et mise par défaut

après tout ça, j'ai donc une imprimante détectée automatiquement en usb et une imprimante installée manuellement

j'imprime une page: je sélectionne cette nouvelle imprimante (pas usb) : -> ça n'imprime pas

je lance un scan: je sélectionne celle non usb: -> pas mieux

MAIS, MAIS, MAIS

concernant l'imprimante: si je sélectionne la "brother_MFC_L3750_séries..." ça imprime

concernant le scan: il n'y a plus tous ces choix que j'avais avant (avec le 60000 par exemple)
il ne reste que "brotherMFC-L3750CDW" et "escl brother MFC-L3750CDW series (usb)" et si je choisi ce dernier choix (usb), ça scanne
j'ai lancé le scan 5 fois, ça marche.

j'ai donc, supprimé l'imprimante ajoutée manuellement, puisque je ne l'avais pas choisie ni pour imprimer, ni pour scanner
il ne me reste donc, que cette imprimante reconnue automatiquement et dont je n'ai rien modifié (pilotes)

eric63

Re : scanner MFC-L3750CDW [résolu] (voir #140)

ok
tu as choisi le «mauvais protocole» ippS
tu devrais choisir IPP mais bon visiblement ça marche donc c’est pas une obligation

sur ta première image
il y a une ligne de ton imprimante sur Imprimantes réseau en driverless (une sans pilote) c’est celle ci qu’il faut choisir (c’est l’usb en réseau) elle est unknow les noms peuvent être changés

l’URI est ok
ce qui t’aurais emmené sur le choix d’un pilote recommandé en haut de liste et un pilote adéquat (moi j’ai eut un pilote «Imprimante réseau IPP via DNS-SD»)
sur kde les dénominations ne sont pas tout à fait pareils

je ne sais pas la différence entre le IPPS et le IPP
S comme sécurité en plus sans doute
mais bon tu as maintenant une imprimante qui imprime
et un scan qui scanne peut être pas la peine de chambouler ce qui fonctionne

escl c’est le même protocole lié à ipp-usb c’est une autre appellation il y a aussi une désignation WSD qui est lié à ipp-usb
c’est des protocoles de liaison usb-réseau ou wifi/ethernet-réseau en gros

celle que tu avais en plus c’était sans doute celle lié au wifi de l’imprimante

tu pourrais le passer en résolu a mon avis

---

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

goliath60

Re : scanner MFC-L3750CDW [résolu] (voir #140)

tu as choisi le «mauvais protocole»

ok, j'ai vu ma mauvaise manip

peut être pas la peine de chambouler ce qui fonctionne

je plussoie
je laisse ça comme ça, ça fonctionne et ça me va très bien

tu pourrais le passer en résolu a mon avis

j'attendais ton retour, je le fais de ce pas

ce que je retiens de toutes ces discussions (qui me resservira peut être un jour).
. il y avait un problème qui bloquait la MAJ pour le passage en version 22.04
. tout s'est réellement débloqué à partir du poste 133 (je ne dis pas que les autres posts n'ont servis à rien, loin de là, c'est pour les suivants qui seront peut être dans dans le cas, ou pour moi)

je remercie ENORMEMENT tout le monde, pour votre patience, votre temps, votre disponibilité, vos explications et vos résultats

Dernière modification par goliath60 (Le 01/11/2022, à 11:18)